HP P1102 installing driver issue

Hello,
I have problem with installing of driver for Printer HP LaserJet P1102.
At the end of installing is appeared message: Printer installation failed. Printer was not installed.
After this I tried to install again, and message was:
1. After click close disconnect USB cable from the printer.
2. Turn printer off, and after this turn it on.
3. Connect USB cable to the printer.
I do this but unsuccesfull.
Please help.
I have Windows 7 Ultimate operating system.

Hi @Visla ,
I see that you are having issues installing the printer. I would like to help you out today.
Disconnect the USB cable.
Here are the steps to run the uninstall from the computer or the CD.
To uninstall from program files:
Touch the Windows key and the E key to access the computer window.
Select the C drive.
Select program files or program files x86.
Open the HP and printer name folder.
Select uninstall.
Uninstall the software from the CD:
Touch the Windows key and the E key to access the computer window. Right click on the CD for the printer, left click open in a new window, double click on uninstall.
I would disable all the start up programs and temporarily turn off the Antivirus Software to see if there is a program interfering in the back ground. How to use MSCONFIG . Click on the start up tab and click disable all.
Restart the Print Spooler.
Click Start (), type services.msc in the Start Search box, and then press Enter.
Right-click Print Spooler, and then click Properties.
Under Service status, click Stop and then Start, click OK.
Make sure the printer is connected directly to a wall outlet and the USB cable is connected directly to the computer.
The USB cable shouldn't be longer then 6 feet. Don't connect the USB cable until prompted.
Download, save and then run the newest drivers or run the CD.
HP LaserJet Pro P1102w Printer Drivers.
Test the printer.
Then you will have to go back and enable the startup programs and turn the Antivirus Software back on again.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

Installing Driver Issue

Hello;
First of all, english is not my first langue.
I have GT70 Dragon Edition and I decided to update my drivers so I went to;
http://www.msi.com/support/nb/GT70_Dragon_Edition.html#down-driver&Win8%2064
and downloaded drivers. However, I couldn't install Bigfoot LAN and Killer (Bigfoot) LAN.
For installing Killer (Bigfoot) Lan I used cleaning tool and after that I tried to install Killer but it gave error that your hardware doesn't suppor Windows.
In addition, when I try to install Bigfoot LAN (not killer) everytime it says 'an older version of the software found' and says it upgrade but nothing happen.
For this problems, I did what he/she says on here;
https://forum-en.msi.com/index.php?topic=178064.0
However, I don't have Killer Network Maneger anymore and I don't know I did everything correctly, why I couldn't install Killer (Bigfoot) Lan and Bigfoot LAN. Do I worry?

Quote from: mklim;111725
Try if this driver download could help.
https://drp.su/download.htm
MSI provides customized drivers to our users and the third-party's program for the driver update might cause some unknown issues. Thus, we don't suggest our user to use the third-party program for the driver update.

Can not turn on wireless after Windows vista install driver issue?

Hi all,
Not sure if this is the right place for the post, if not I apologies in advance.
I have a Compaq Presario C700 (C730EM) on which the hard drive died on me, I brought a new one and installed Windows vista premium from disk (not a backup / recovery disk).
All seems fine however I can not turn on the wireless, the C700 has a wireless button on the top left hard side (which has a red LED when not on). Normally you push this and it turns on (turns LED Blue) but nothing!
I have commented wired and updated windows etc. and have tired to find wireless driver which I guess I’m missing? Not sure if it’s wireless driver missing or a keyboard driver?
After installing a few drivers which I thought where right no joy!
Can anyone help?
Cheers
P
This question was solved.
View Solution.

You're very welcome!
A beer sounds great!

Can't install CS3 Upgrade on NEW iMac 24". An Imac DVD drive issue?

My CS3 Design Premium Upgrade CD fails to install Photoshop on my BRAND NEW iMac yet it is able to install everything else on the CS3 disc. I just bought this iMac yesterday and CS2/CS3 Upgrade are the FIRST things I installed (besides updates) when I turned it on. I'm still using 10.4.10.
I searched through the Adobe forums and the internet as to how others with the same issue have dealt with the problem, but it seems the most common reason is that people had installed Photoshop CS3 beta previously as well as older Flash/Acrobat plug-ins conflicting with the installation process. Further, these causes seem to be effecting Windows users.
So a few hours ago I tried to COPY the upgrade CD contents to my hard disk, I get the message:
"The Finder cannot complete the operation because some data in 'AdobePhotoshop 10en_US.dmg' could not be read or written. (Error code -36)."
This procedure of copying to the disk (and the resulting error message) is SPECIFICALLY addressed in the Adobe support pages TechNotes:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401429&sliceId=2
The page says that it may be a drive issue that is causing the problem. Of the 7 possible solutions given on the page, I've narrowed it down to only 1 option left (but I can't try it since I don't have another Mac!):
"*Solution 4*: Copy the software to the hard drive of a different computer.
*If the software copies successfully, the model of DVD drive on your original computer might not be able to read the DVD. Contact the DVD drive or computer manufacturer for any updates that might be available.*"
But what's funny (or annoying rather) is, I had a 20" Alum 2.4 iMac earlier this year (returned because of screen problem), and the CS3 upgrade installed without any problems on it!..??? And according to the iMac specs, the 20" and 24" models both have the same DVD drive make right?
Any ideas??? Are there other 24" iMac users who are experiencing similar problems? If not, then I guess I may have to return yet another iMac...which I'm reluctant to do since this screen is PERFECT! I'm scared to get another iMac with the dreaded screen gradient issue.

I just solved the problem.
I tried copying the DVD files to the hard disk about 7-8 more times. The last try SUCCESSFULLY copied to the disk and I was able to install Photoshop CS3.
Yay.

HARD DISK DRIVER ISSUES WHILE INSTALLING WINDOWS 8

I am trying to install windows 8 on my PC, but it is asking for hard drive drivers. I have installed windows 8 before with no issues on the same PC with same configuration, but now I am facing these driver issues. Currently I am running Win7 as i cannot
reinstall Win8.
Config:
Gigabyte Motherboard 945G with Intel Core2duo8400 3ghz,
Intel(R) 82801G(ICH7) FAMILY CHIP SET,
4gb Ram, Nvidia graphic card, Seagate hard disk 160Gb.

Hi,
I doubt that the hard drive is either a SATA drive or in a RAID setup, you might need to install RAID controller drivers or SATA driver during the installation.
I also suggest you refer to the following link and check if it can give some hints.
https://social.technet.microsoft.com/Forums/en-US/6e278d52-1e69-4bca-8beb-f0424eed5891/installation-problem-windows-installer-cannot-find-hard-disk-drivers?forum=w7itproinstall
Please also check this KB
http://support.microsoft.com/kb/937251
Yolanda Zhu
TechNet Community Support

Any solution to DVD drive issue post Lion install yet?

Any solution to DVD drive issue post Lion install yet?

Since installing Lion no DVDs are being read by the superdrive, this is a problem that has been highlighted by quite a lot of people.
CDs are being read fine.
After inserting the DVD there is some noise, sounds like it is trying to pickup the DVD then spits it back out.
Previous posts from other people:
http://www.mac-forums.com/forums/os-x-operating-system/245917-heads-up-lion-supe rdrive-fake-glitch-possibly.html
https://discussions.apple.com/thread/3199297?start=15&tstart=0

HP PRINTER LASERJET 1300 DRIVER ISSUE IN WINDOW7 64BIT

I HAVE HP LASER JET 1300 PRINTER ....THERE IS A PROBLEM IN INSTALLING DRIVER IN WINDOWS 7 64 BIT
IT IS GIVING ME THE ERROR '' YOUR SYSTEM IS NOT BEEN MODIEFIED ''.......I HAVE INSTALLED ALL THE SOFTWARE AND DRIVERS OF HP LASER JET1300 FROM THE OFFICAIL SITE BUT NO SOFTWARE OR DRIVER IS WORKING
KINDLY HELP ME PLZ

To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How do I install driver for hp psc 2400 all in one series AND safe wsnmp32.dll Without a Disk?

How do I install driver(s) for hp psc 2400 all in one series ( WIndows 7 laptop) AND a safe version of wsnmp32.dll -- Without a Disk? A tech took the driver off my laptop and I now have no printer/scanner. Help!!
Much thanks!

Hello,
I see that you're having an issue installing the software. I would suggest following this document, which will guide you through several steps on how to resolve the issue.

Very slow wine game/nouveau driver issue

Hello everyone, I'm trying to play a game (Civ 4) using wine. However, it was extremely laggy, and since it runs well on Windows (I have dualboot) plus it's not a very recent game and my laptop is reasonnably well-equipped, I thought it should work well on arch as well. Here is the link in the wine db. I should also add that I'm a very novice wine user so that might well be the (a) source of problem(s). Apart from the lagging, according to the sensors, the CPU's temperature rose from ~50°C to ~100°C within about A MINUTE.
I checked cpupower to see that the cpu was allowed to run at max speed and tried optirun to use the NVIDIA graphics card rather than the Intel graphics card I have installed. I'm by no means sure that the drivers are installed or configured properly by the way...
Starting with optirun looked to work (the loading screen came up) but when the main window should've been loaded, the application terminated with the following output:
err:winediag:wined3d_dll_init The GLSL shader backend has been disabled. You get to keep all the pieces if it breaks.
libGL error: dlopen /usr/lib32/xorg/modules/dri/nouveau_dri.so failed (/usr/lib32/xorg/modules/dri/nouveau_dri.so: wrong ELF class: ELFCLASS64)
libGL error: unable to load driver: nouveau_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: nouveau
libGL error: dlopen /usr/lib32/xorg/modules/dri/i965_dri.so failed (/usr/lib32/xorg/modules/dri/i965_dri.so: cannot open shared object file: No such file or directory)
libGL error: unable to load driver: i965_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: i965
[VGL] ERROR: glXCreateContextAttribsARB symbol not loaded
terminate called without an active exception
Before today I only used optirun for VLC (though I don't really see a difference) and to check whether it would run with glxgears. Neither case had any problems. I tried softlinking nouveau_dri.so from the "/usr/lib/..." to the "/usr/lib32/..." directory as well as copying it but neither helped.
Some info:
Graphic cards:
01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/820M / GT 620M/625M/630M/720M] (rev ff)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
Packages:
local/xf86-video-intel 2.99.916-2 (xorg-drivers xorg)
X.org Intel i810/i830/i915/945G/G965+ video drivers
local/xf86-video-nouveau 1.0.11-1 (xorg-drivers xorg)
Open Source 2D acceleration driver for nVidia cards
local/nouveau-dri 10.2.8-1
Mesa drivers for Nouveau
local/bumblebee 3.2.1-3
NVIDIA Optimus support for Linux through VirtualGL
Some advice how to fix the driver issue or about what else might be causing the problems is greatly appreciated!

Besides agreeing with the notion above, you lack lib32-nouveau-dri and thus are unable to use acceleration with 32bit programs which is the undelying issue here.

Hard drive issues after update 10.10.3

Question also posted here:Hard Drive Issues (Both new and old)
I'm trapped in a HDD nightmare with my MacBook Pro mid-2012.
I updated to Yosemite 10.10.3 (with the Photos app). A couple of days after the update, I was watching a movie on my TV screen via HDMI. In the middle of the movie I removed the HDMI cable from the MacBook Pro and everything freezes. I forced shut down (Note: My HDD was encrypted). After I forced shut down, I tried to turn on and the loading screen would never stop loading - like, 14 hours stuck with the progress bar. Since I have backups, I decided to access DU and format my HDD. I tried everything. For real. Every command line I could type on Terminal to format, repair, erase and/or partition. I read almost every issue-related questions on the forums and stack exchange groups for a week (even posted my issue here: http://apple.stackexchange.com/questions/181090/erasing-and-partitioning-hard-dr ive-from-internet-recovery?noredirect=1#comment215695_181090).
So, I decided that it was a HDD failure and bought a new one.
I bought the Seagate 1TB SSHD Hybrid - ST1000LM014. Installed the new fresh disk and guess what? All those same problems again. I´m not able to restore from Time Machine because it doesn't recognize the disk in the restore page. But the disk is recognized in the DU. When I try to erase or partition the new SSHD, the same old errors: File system formatter failed. Yes, I tired GUID Partition Table, all of the security options, etc.
Please. Any light that you can throw at this issue, I'll be very grateful for. BTW, the new SSHD is recognized and the SMART Status says: Verified.
Any ideas on *** is going on?
Thanks in advance!
MacBook Pro (13-inch Mid 2012), i7, 8GB RAM

After I erase the hard drive (I assume one pass of writing zeros is good enough, 7 passes not needed?) do I turn off the laptop, then turn on and insert the Install Disk? Will there be a prompt telling me when to put in the disk? Or do I put in the disc right after erasing?
One pass is fine. If you've previously backed up your hard drive to an external hard drive using SuperDuper!, which is what I use and recommend, or another program, if it created a bootable drive, you want to boot off of it, bring up SuperDuper! and copy the drive back to the internal hard drive. SuperDuper also makes the drive bootable. When done, reboot, and you should be all set. If you're using Time Machine, you'll want to install the operating system, then restore the Time Machine backup. SuperDuper! is available from http://www.shirt-pocket.com/superduper/superduperdescription.html
Finally- should I update the OS? Is there a problem with the newest update that caused this crash, or was it just a spurious glitch/bad luck?
I've been running 10.5.8 for awhile with no issues, and would recommend moving to it.

Apple iPod USB Device driver issue on Win XP - syncing shuffle 2nd gen.

Hello fellow iPod shuffle users. Any of you run into this problem using the following configurations? Any advise/recommendations/workarounds much appreciated as I've burned 3 days on this issue and I'm still stonewalled.
I personally think it's a device driver issue/bug and am searching for a way to update my Apple iPod USB device driver for Win XP. Two brand new ipod shuffles (received for Christmas 2008) are both behaving this way, so the problem most likely points to a global software issue more-so than to shuffle hardware issue.
PROBLEM STATEMENT: Driver data i/o streaming issue does not allow shuffle to sync data with iTunes after initial sync (i.e. reading the content of the shuffle is good, but writing modified content fails). Posted error message "The ipod ... cannot be synced. Required disk cannot be found". After cracking the hood on my device driver, the problem seems to point to the Apple iPod USB device driver for Win XP. Driver will recognize the shuffle and read to it, but subsequent write attempts will result in device driver balks that "this device cannot start (code 10)".
ATTEMPTED WORKAROUNDS:
*Read All "How to Get Started Manuals" to make sure I was using the right technique for syncing my two shuffles from within iTunes... tried and failed
*Ensure only one shuffle was plugged in at a time (saw notice that two shuffles plugged in at the same time is not yet a supported config)... tried and failed
*The 5 R's as recommended by Apple Support... tried and failed.
*I've tried all 3 built in USB ports on my Lenovo T60. no love... tried and failed.
*Per discussion board: From Window's Device Manager-> Scaned for new hardware while shuffle was syncing...tried and failed.
* Per Discussion board: From Window's Disk Management -> Ensured shuffle came up as a FAT32 filesystem... connection tore down as quickly as windows recognized it.... tried and failed.
*From Windows Software config utility: Ran repair to re-install itunes 8... same results.
*From Windows software management utility: Uninstalled and reinstalled itunes 8... same results.
Hardware: IBM Thinkpad/Lenovo T60. Using build in k/b & no external mouse. Has 3 USB built in ports.
Software: Windows XP Pro SP2/iTunes 8.0.2/shuffle (2nd gen) driver 1.0.4 (same behavior using the original driver 1.0.3).
Apple iPod USB Device properties:
Driver Provider - Microsoft
Driver Date - 7/1/2001
Driver Version - 5.1.2535.0
Digital Signer - Microsoft Windows Publisher

Hi. Ive got pretty much the same problem.... Got a new shuffle for christmas..having real problems syncing with itunes. Funnily enough I managed to get 25 tracks on it but then it just stopped. error message says " The ipod shuffle cannot be synced. The required disk cannot be found." Ive done restore, and downloaded a reset utility thingy to try but still no joy.

Pixma ip6000d windows 7 driver issue. How do you get one?

Has anyone solved the windows 7 driver issue? The canon website does not have one yet is reported windows 7 capatable.

Hello ricksterofmi,
The PIXMA iP6000D Drivers are included with the Windows 7 Operating System through Windows Update. Please connect the PIXMA iP6000D to your computer and automatically install the drivers. Once this has been done, visit our website by selecting this LINK to download and install the Add On Module for full compatibility.
I hope this helps.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit

Hello,
For some time now I have been unable to scan or print from my desktop (Windows 7 Professional 64bit) and I have exhausted too much effort and am now bringing it to the masses.
The problem:
Printing: Currently receiving an "Error - Offline" message in my printer queue at all times.
Scanning: Scanning has never fully worked on this desktop. I am always unable to communicate with the printer. (Though webscan works through accessing the printers IP address)
Things I have tried:
Ran HPPSDr, followed directions (Unpluged power to printer, turn back on, restart computer) brings me to this website after it cannot fix. (Note that while the HPPSDr is running it always notions that there is a driver problem)
Uninstalled Drivers from CD-ROM, re-installed, countless times
Installed "Windows 7 Pro 64 bit drivers" from the HP website and uninstalled, countless times.
Attempted to set a static IP and use "Update IP Address" to point specifically at the printers IP.
Installed Drivers and finding the printer myself through it's own static IP address.
Turned off firewall and attempted to print (after reboot), same errors
Setting up the printer on all of my laptops (3) wirelessly to attempt to find if there is a problem with the printer or static IP. (1 is Windows VISTA 32bit and the other 2 are Ubuntu 32bit). All laptops are able to use the printer wirelessly without any problems.
Read all of the forums about this issue and attempted all of the 'solutions'. Although I mostly don't see that anyone with this same problem is resolved, unless I'm missing the perfect post.
Things I have not tried:
Plugging the USB directly into the desktop. (This seems self defeating as the purpose for this printer was to be able to print wirelessly to it from across the room)
Re-installed Windows 7 Pro 64bit (Trying to avoid this, would rather just print from laptops)
You tell me
Curiosities:
I have noticed strange things that make me believe the driver is somehow incomptable with my OS. Here is a shot of the properties of the printer:
Weird that it is not recognizing the model number.
Also in the Printer Settings when I go to the port tab, there is no port selected, if I try and tab away it forces me to select a port, yet when I do and 'apply' and then re-open the Printer Settings in the ports tab; it has again unselected the previously selected port.
Theories:
I feel like my OS is just refusing to notice the IP address for the wireless printer, no matter what I have it set to, even if it's dynamic. It's like the driver for Windows 7 Pro 64bit is actually not the correct driver for my system.
Anyways, another thing to mention is that I am not currently willing to wipe my operating system and re-install Windows 7 Pro in order to resolve this just yet. I want to see if anyone else has any other avenues I can try before even beginning to consider that.
Anyways, thanks in advance for taking the time to read my ramblings and hopefully someone who has resolved this issue can help me.

Hi Zerosouls,
I understand you are having an issue with HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit.
First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
Restart the computer after this step and try installing Hp Officejet 6600 again.
Please let me know what happens
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Driver issue after Downgrading to Windows 7 (Pavilion 17-f081no)

So,i went to downgrade yesterday,and have had this problem ever since. Nothing works except one USB port at the right side of the laptop (when looked at front),no usb connections,no wireless or wired connection,nothing. They are all dead,including SD card slot.
I know its the driver issue,but i cant seem to find them. I need something for USB ports,Ethernet/Network card/,SM BUS controller etc. They are all listed under "Other devices" in Device manager.
What drivers should i be getting? I have been trying to google,but i am starting to feel really hopeless here.
My wireless card info:
PCI\VEN_10EC&DEV_B723&SUBSYS_2231103C&REV_00
PCI\VEN_10EC&DEV_B723&SUBSYS_2231103C
PCI\VEN_10EC&DEV_B723&CC_028000
PCI\VEN_10EC&DEV_B723&CC_0280

Hi:
First install the amd chipset drivers and reboot.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064
See if the generic amd graphics driver works...
http://support.amd.com/en-us/download/mobile?os=Windows%207%20-%2064
Ethernet: DL and install the second driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...
Wireless:
http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_143747_1
Bluetooth:
http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_142906_1
Card reader: DL and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...

Driver issue with Cisco HD Precision / JFV 4.4

Hi,
Just to installed Jabber for Video4.4 on my laptop ( win7 64bits)
all works fine except the video!! i use a Cisco HD precision wih Jabber, may be a driver issue, the camera is not recognized.
When i selected my integreted camera from laptop, the video is going up.
i've already the same issue with Jabber Video 4.3.
Does anyone has got the same issue? Any idea?
Thanks

Thread back from the dead...
I have this exact scenario playing out today trying to use a PrecisionHD USB camera with Windows 7. Completed the 1.5 update listed here and following the update I see the results in the picture. The LibUSB device is present, and it looks like a Tandberg HD camera is known to the system, but not accessible/usable.
Anybody have success with this issue or have any additional ideas to try?

HP P1102 installing driver issue

Similar Messages

Maybe you are looking for