HP P1102w printer will not wake up after sleep (wireless setup, win8)

Bought this printer a month ago.  I have no problem with both LAN +Wireless setup.
Windows8 OS
I noticed once the printer is not on (goes to sleep), it will not wake up by itself.
According to manual, if I send a print job, it should wake up by itself.
Currently, this is what I need to do.
I need to physically turn off and turn on the printer, wait for 10-15 seconds until the wifi blue light is solid (no blinking)
and then send my print job, and it will work
Just wondering whether HP has a solution to this, thanks
This question was solved.
View Solution.

Is HP ever going to fix / address this issue? 
People Running the latest firmware - 20130703
And there is no option to disable Sleep mode.  The max you can set it to is 1 hour.
The power physically / manually has to be powered back on, to establish IP connectivity.
This has been an issue for 2 years now!!! Come on what does it take to get an update?
Seriously?

Similar Messages

  • Non retina 15" MBP will not wake up after sleep following mountain lion upgrade

    I have an early 2012 15" 2.2 MBP with the 4gb video card.  since upgrading to ML a lengthy sleep renders it unresponsive.  it will not wake up and will have to be force shut down, then restarted to use.  you can here the hard drive spin up after a long sleep (6-8 hours) but only after you hit the power button.  even so it's completely unresponsive until restarted..  i noticed apple released an update for retina MBPs for the same issue.  unfortunately they have not released the same update for non retina users yet. 

    Since you had NO problems before ML upgrade:
    Not to side with the tech or you, because upgrading OS can be frustrating (it shouldn't). 
    It appears that you need to do a reinstall (backup first).  Its pretty simple to reinstall, just go to boot drive and reinstall.  You'll probably have to reinstall print drivers, other than that it's pretty straight forward.
    A couple of things I'd do before and after reinstall is to repair the disk (3 times each) while in the boot drive.  Then once completed choose the startup disk in system preferences or at least verify it's the startup disk, then repair permissions.  If you add apps or printer drivers repair permissions again.
    A major problem for lots of folks updating to a new OS is they don't think about disk health....And that's why it's important to insure everything is in mint condition before upgrading to a new OS.  The same reason many choose to do a FRESH install of a new OS, by zeroing out the HDD (or SSD) and then repairing the disk and then installing the new OS (you MUST have a solid backup before doing so). 
    I always have at least 2 solid backups before doing so, but that's me. 100% of the time I do a fresh install of a new OS. 
    I have a spare computer I use as a test machine for a week or so by upgrading without fresh install.   After figuring out all the possible bugs with the test machine I do a clean install of my other computers and once there stable I do a fresh install of the upgraded one.
    Not a lecture on how to do things just my procedure which has served me over the years without any problems.
    I have photos, videos, documents, and financial records dating back to 1991 so I must be doing something right.

  • Officejet 7612 E All in one printer will not wake up from sleep mode or powersave

    We cannot get a Officejet 7612 to wake up from sleep mode or powersave.  I have tried logging into the web interface but I am only able to delay sleep mode up to 15 minutes.  I need to shut this off or have the issue fixed.  The only way to use the device is to unplug the power cord and plug it back in.  The printer does not even respond to the power button.

    Hello,
    Please try the  below mentioned steps... Firstly print an network configuration page by touching the Setup > wireless Menu > Wireless Settings > Display Network Configuration > Print info [Ok] -type in the printer's ip in address bar of your browser ( Internet explorer or firefox or chrome ), which would display printer inforamtion. click on Network Menu ,
    click Network on Left, of the window.
    click on Network Address (IP), the info will be displayed on the right side. - by default the selection will be on Automatic IP.- click on Manual IP and then type in the following..
       printer's ip address in "Manual IP address"
      subnet mask using the printed report in "Manual Subnet Mask"
      default gateway using printer report in "Manual Default Gateway" Now click Apply. Wait untill the settigns are applied.-After which, power Off the Printer.
    -Restart the PC.
    -Power On the printer.  Hopefully the issue should be resolved.

  • My MacPro will not wake up from sleep after the 10.8.2 upgrade.

    Since latest os upgrade to 10.8.2, my mac will not wake up from sleep.

    Please read this whole message before doing anything. This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it. The purpose of this test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows: 
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
     *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • My iMac will not wake up from sleep after upgrading to OS X Mavericks

    After upgrading to OS X, my iMac will not wake up from sleep.  Each time I have to do a hard restart.  Is there a fix for this problem?

    Hi,
    I have just had the same problem with my iMac and after upgrading to Mavericks my iMac would not wake without pressing the power off button and re-booting.
    Anyway, I have since done a complete new install on my iMac and have gone 5 days without an issue with the iMac not waking.  It was a bit of a pain to do but my own view so far is that the problem is linked to the upgrading of the OS instead of a clean install.
    My iMac now flies with a new OS installed instead of an upgrade.

  • ARD 3.3 Will not Wake Machine After Long Sleep

    We are using ARD 3.3 on our network. We have found that ARD will not wake machines after they have gone to sleep and stayed in that state overnight. If I manually wake the machine and put it to sleep, it works fine. If I wake the machine and put it to sleep for several hours, it still works fine. The problem is completely random and only seems to happen when the machines have been asleep overnight. There are three machines this occurs with, I will describe each one below. I have a sneaky suspicion that it is our Firewall appliance causing the problem, but would appreciate any other input...
    Machine #1
    Intel Imac 2.8Ghz core-duo
    OS X 10.5.8
    4GB 667mhz DDR2 SDRAM
    Problem: Occurs 98% of the time and is very consistent on this machine
    Machine #2
    PPC G5 Imac 1.9Ghz
    OS X 10.4.11
    1.5GB SDRAM
    Problem occurs about once a week to once every other week with this machine
    Machine #3
    Intel Imac 2Ghz Core Duo
    Mac OS X 10.5.8
    2GB 1067Mhz DDR3
    Problem occurs once in a blue moon
    I have tried the following troubleshooting steps with machine #1 because it seems to have the problem so much...
    1. Tried another user account
    2. Tried removing power management plist located in HD --> Library --> Preferences --> Systemconfig
    3. Tried resetting the SMU
    4. Tried to repair disk permissions
    5. Ran FSCK -FY from single user mode
    6. Ran AHT for 17 hours straight with no errors
    7. Booted to clean install of OS on external FW drive with user ported to FW drive.
    BTW: Our firewall appliance is an Snapgear SG560 with the latest firmware.
    Thanks for any input much appreciated...

    I cannot wake up any computers even if asleep for a few seconds. ARD 3.3 has broken a lot of features such as copying files by dragging from a remote connection to desktop and it no longer reports Current Status correctly.
    AWFUL update. Apple please fix this or explain how to downgrade to 3.2
    I can no longer use this in the school where I supervise 50 Macs.

  • Maverick will not wake up from sleep

    Maverick will not wake up from sleep. i dont see any related issues. maybe i am the only one? Ive been trying to run maverick for the last 2 months. I thought everything was fine after I erased, reformated and partitioned the HD and installed Maverick on a clean drive......  and then i get the ? startup disk. And then when it does run, I cant let it go to sleep. It will not wake up from sleep. I get the spinning beach ball of death everytime. I leave my computer on and run to the grocery store and come back........ I have to shut my computer off from the control strip and push the start button, every time. 
    Anyone know if this will damage my computer??
    I have selected the HD in the preferences startup; I've unplugged it for several minutes; started up in S mode; zapped the P ram; ran permissions; you name it. im at a loss.
    Any help would be greatly appreciated. Should i buy another Mac? I cant afford one in this economy.

    I suggest you use the Recovery Partition Disk Utility to check the hard disk and then re-install the OS from there.
    http://support.apple.com/kb/HT4718?viewlocale=en_US&locale=en_US

  • 890FXA-GD70 Will Not Wake From S3 Sleep

    890FXA-GD70 will not wake from S3 sleep; the power comes back on and the fans run but the video never returns and the system hard locks with a POST code of 22 or 24. Other than this issue the system is rock solid.
    Windows 7 Ultimate 64
    AMD Phenom II X4 955 Processor
    Sapphire 5870 Graphics
    Crucial M4 SSD
    Corsair DDR3
    No overclock
    I have reproduced the issue on two 890FXA-GD70s motherboards and I am convinced that this is not a result of a failed motherboard. I also was able to move my fully installed SSD hard drive, processor, memory and graphics card to an Asus 890FX board and successfully wake from S3 sleep proving that my OS and driver installation are working correctly.
    I know how to properly set the BIOS as I have installed many 890GXM-G65 motherboards for S3 sleep without issue. The problem seems unique to the 890FXA-GD70.
    Is there a fix for this?

    I have identified the cause. The "Extra RAID/IDE Controller" must be "Enabled" to use S3; otherwise the system will hang on the wake event. This is true even if the "Extra RAID/IDE Controller" goes unused. The "Extra RAID/IDE Controller" must be set to "Enabled" for S3 sleep to wake.
    This would seem to me to be a bug since none of the other MSI boards I have used require the optional IDE controller to be enabled in order for S3 to function properly.

  • HT1338 Mac mini display connection will not come back after sleep, I have to shut down and restart the monitor.

    Mac mini display connection will not come back after sleep, I have to shut down and restart the monitor.

    Finder icon on dock, macintosh hd, library, launch agent - delete all files & restart sleep to test
    also
    Finder icon on dock, macintosh hd,
    Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
    delete file & restart sleep to test.

  • Not wake up after sleep

    My new (2011) MacBook Pro does not wake up after sleep and this happens about 1 time in 10.

    Hello, I have a Mac Book Pro and have the same problem, I close the lid, I have tried every possible thing I have read, and the problem is still here.
    Things I have done:
    - SMS Reset.
    - PR reset,
    - Installed Caffeine and solve temporaly the problem, but using annother display.
    The mac´s screen only turns on some seconds in grey when start chim sounds, but it turns off, however, I could run the mac but keyboard, keyboard backligth´s and mouse pad don´t work
    I ran the Apple Hardware Test complete and It says there is no problem. This not The truth.
    Thying a solution, I did a recovery from newest version and now it get worst and only can see the computer torning on, chim sounds, screen goes on in grey, them screen torns of ando the white ligth gets on and some seconds later start twinkle. Even when the lip reamins opened always, nor the keyboard, keyboard´s bacligth and the mouse pad woks.
    I for real don´t know wath to do, I am almost crazy, almost trow this mac to the trash and buy a new windows computer. Please, help to recover my mac!!!

  • MacbookPro will not wake up from sleep after memory upgrade

    I am restarting this topic as I have read thread after thread (many years old) and they all just die off with out any definite solution.
    I have a 13" Mid 2010 Mac book Pro which originally came with 250gb HDD and 4gb memory
    I have recently upgraded to a 256 SSD and a 1TB HDD optidrive replacement along with a 8GB memory upgrade and I am now running Lion 10.7.4
    If I close the lid and open within approximately 1 minute it will wake up quickly as normal, if I leave it asleep for a minute or 2 it will not wake up with out holding the power button for several seconds and then I still need to wait a several seconds for it to respond and actually wake up. Sometimes I will need to completely shut down and restart. If I wanted a computer that takes forever to wake up I would have a PC!
    The last thing I upgraded was the memory so I am sure it is the cause of the sleep problem and not the SSD conversion which was working fine with the original 4GB mem before upgrade.
    I have read about resting the PRAM, resetting PMC as well as executing a line in the terminal, but all of these seem to have variable success. I have tried every thing but using the terminal to adjust the hibernate mode setting as I am not proficient with terminal and don't actually understand what changing this setting does (sudo pmset -a hibernatemode 7).
    Has anyone resolved this sleep problem and what did you do? I would greatly appreciate some knowledgeable insight on the hibernation settings, and what running the line in the terminal is actually doing... even better what is the default so I can change it back if it doesn't resolve the problem.
    A simple memory upgrade causing such a issues is very irritating.... Any help would be greatly appreciated!

    But still, the sleep issue persists, so it is a more subtle timing issue. I upgraded my MBP with a Corsair 8GB kit ( http://www.corsair.com/us/corsair-mac-memory-8gb-ddr3-sodimm-memory-kit-cmsa8gx3 m2a1333c9.html ) and it indicated it had 9-9-9-24 CAS timing. It has worked flawlessly till now. Note that my Mac is a Late 2011, whose memory runs at 1333 MHz.
    As far as I can tell, the 13" Mid 2010 models used 1067 MHz memory with 7-7-7-20 CAS timing: http://www.corsair.com/us/corsair-mac-memory-8gb-dual-channel-ddr3-sodimm-memory -kit-cmsa8gx3m2a106c7.html

  • Mac will not wake up from sleep

    I'm running 10,7,5 on 2x2.66 GHz Dual-Core Intel Xeon. The computer needs to restart because it will not wake after it sleeps. I've tried lots of different settings in the screen saver.
    Any suggestions?

    .... and you fail to mention the model SSD and firmware version... or how you installed or cloned the system
    most people also move most of their user folder to another hard drive.
    sounds like a more normal Mail + OS issue if just that.
    hard restarts = directory corruption so don't reboot w/o first either Recovery Mode, then follow up with Safe Boot.
    And maybe you have 3rd party hardware or software that is not compatible with 10.8.2 needs to be considered as well.
    2008 model 3,1 also are having a lot of issues this year. Including another critical piece, what gpu it has.

  • Will not wake up from sleep!!!

    Toshiba Satellite C75D (part number: PSCLEU-003002, serial number: XXXXXXXXX. 
    Third one. I am trying to avoid taking this one back too.
    I close the lid(sleep mode) and I go to bed. I wake up and open the lid, laptop will not wake up. I can close the lid for an hour, and it wakes up, but over night it will not.
    All settings are as they come out of the box. I called tech support, and they changed the power saving settings. That had no effect.
    Please help me. Thank you.
    [Moderator edit to remove serial number.]

    Yeah?.. Why didn't I think of that??? Well thats a novel idea! That's it !!!  I could call Tech support again!!I've had them on the phone for 2 separate 1 hour sessions. I was hoping this forum may bring forth some answers other than calling tech support again.But thanks for the input.

  • IMac G5 iSight will not wake up from sleep

    This has been happening to me for some time.
    Occasionally my Mac do not wakes up from sleep. Instead it hangs!
    Here how it goes:
    I press a key on keyboard; my Mac wakes up, but screen remains black with only mouse pointer. I cannot see login window.
    And Mac stays this way for hours. No matter if I press a key, click a mouse.
    The only remedy is to press power button and to shut it down.
    Then I have checked console.log. Nothing spectacular. Here is log from last accident:
    Jul 31 21:43:36 snukec kernel[0]: System Sleep
    Jul 31 21:43:36 snukec kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
    Jul 31 21:43:36 snukec kernel[0]: System Wake
    Jul 31 21:43:36 snukec kernel[0]: Wake event 0020
    Jul 31 21:43:36 snukec kernel[0]: USB caused wake event (OHCI)
    Jul 31 21:43:37 snukec kernel[0]: FireWire (OHCI) Apple ID 52 built-in: handleSelfIDInt - received quads == 0. issuing bus reset
    Jul 31 21:43:38 snukec kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
    Jul 31 21:43:42 snukec kernel[0]: AFPSleepWakeHandler: waking up
    Jul 31 21:43:42 snukec kernel[0]: AFP_TCP ASP_TCP SendSleepPkt: sending ext sleep wakeup
    Any idea what to do?
    Matej

    Wait - before you take it in for repair or get put on hold with Support try this:
    Go to System Prefs, Energy Saver, then set your display sleep and computer sleep times the same. Check both check boxes too.
    Trust me, I've been working on this problem with Apple and checking the discussion boards for over a year now. I've had my logic board replaced, power supply replaced, been through about 8 Apple techs and tried just about anything you'll read on these boards or get told to do by a tech. If you notice about every 4th or 5th page has someone posting about this problem. The above suggestion is the most recent thing I tried (from reading posts here in this forum, not from an Apple Tech) and it has come out of sleep for the past 30+ tries without a problem. This is not to say this is IT(the final sovle), because it has been known to go on a good run for a week or so and then come up again. This 'fix' however, has been the most promising. If it continues to work, I will let Apple know and hopefully they can fix the bug. They have all sorts of case history with me on this problem.

  • NEW COMPUTER USING WINDOWS 7 WILL NOT WAKE UP FROM SLEEP MODE. I HAVE TO MANUALLY TURN IT OFF AND BACK ON.

    New laptop with Windows 7 does not wake up from SLEEP MODE.  I have moved the computer, moved the cursor, pushed every key on the keyboard, moved the space bar but nothing wakes it up.  I always have to manually turn the computer off and then
    turn it on again.  I have searched the FORUM but don't see anyone having my problem.  I have searched under SLEEP MODE in GETTING STARTED WITH WINDOWS 7 but I don't find where they address the different modes.  Any suggestions?

    Hi,  I would suggest you to check allow this device to wake the computer have a tick mark.
     Here are the steps:
    1. Click Start, type Device manager in the search box.
    2. Go to Device manager.
    3. Click on keyboard, it will display your keyboard, right click and go to properties.
    4. Select Power management.
    5. Check Allow this device to wake the computer.
    Follow the same procedure for mouse, restart the computer and check if it works properly.
    I also suggest you to update your display drivers, you can logon to the manufacturers website and download the latest drivers and install.
    For more information:
     http://support.microsoft.com/kb/266283
    Also I suggest you to run the Power troubleshooter to adjust your computer's power settings, and check if it works properly.
    Here are the steps:
    1. Open the Power troubleshooter by clicking the Start button, and then clicking Control Panel.
    2. In the search box, type troubleshooter, and then click Troubleshooting.
    3. Under System and Security, click Improve power usage.
    If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
    For more information, logon to:
    http://windows.microsoft.com/en-US/windows7/Open-the-Power-troubleshooter
    http://windows.microsoft.com/en-us/windows7/Sleep-and-hibernation-frequently-asked-questions
    If the issue persists, please collect the Power Efficiency Report for further analysis.
    Guided Help: Get a detailed Power Efficiency Diagnostics Report for your computer in
    Windows 7
    Regards,
    Leo  
    Huang
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Maybe you are looking for