HP P1102w Wireless Function Doesn't Work!

- I am tech savvy
- used search, google, etc.
- Mac OS X 10.8.3
- HP P1102w, driver 5.0
1. installed "HP LaserJet Full Feature Software and Driver"
2. watched http://youtu.be/c972ybZvZzo
3. after inputting my wireless information (SSID, password), I am redirected to a blank page with this url: http://localhost:5050/cgi-bin/ip_wireless_result.htm
The USB works, but the wireless feature doesn't work at all. Why does life have to be so hard? This is extremely frustrating.

I know that sometimes just pressing the wireless button one time can disable the wireless feature unless you are certain your wireless feature is completely broken. I suggest holding down the cancel button for five to ten seconds until the configuration page prints out and it will provide you with some information in the network section (for example: Wireless DISABLED) if it is not working.
Also, here is a link to the firmware update for this printer designed for your Mac - Version: 20130213. I know this printer can be confusing so here is a link with the User Guide for this model.
I would print that configuration page and try to update the firmware and see if that fixes this for you. Let me know if it works. If not, do you see anything in the network section of that page that prints out that says it has been disabled?
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Similar Messages

The to_date function doesn't work ?

Hello
I don't know why my to_date function doesn't work on my pc.
my statement is pretty complex so i just tried simple one
select to_date('10-Jan-2006','dd-mon-yyyy') from dual;
but even this one doesn't work it says it is invalid month
howcome?
is it because my Windows XP (not english version) doesn't recognise month Jan?
i tried it another place it worked
so is there any language pack / patch i need to install? ?
so does OS matters?
or how to fix this..please help me

By default SQL Developer picks up it's language settings up from (on Windows) the Regional and Language Options. You can see what it has set by querying the NLS_SESSION_PARAMETERS view.
Assuming you don't want to change to using DD-MM-YYYY formats for your months or change your regional settings on your PC, you need to tell SQL Developer which language you want, which you can do by adding the following lines to the file sqldeveloper\jdev\bin\sqldeveloper.conf:
AddVMOption -Duser.language=en
AddVMOption -Duser.country=US

Cannot print with a Samsung ML2160 printer (mono laser) and Pages. Print function doesn't work, only drag and drop in printer's queue

Hello,
I just purchased a Samsung ML2160 printer and it doesn't work with nor my Pages program, nor the Preview (to print PDF). No matter the way I tried, the Print function doesn't work and I cannot neither print or even enter the printer preferrences menu! My MacBook Pro has worked before with other printers, but now with the Samsung it doesn't work at all... Though, if I drag and drop a document, jpg, pdf in the printer queue, it prints just fine, but that method gives me absolutely no freedom to the printing... Could it be something from the Computer -> Machintosh HD -> Library -> Printers? Because a friend of mine was recently trying to save me some disk space, and therefore erasing part of the HP printer (to remove the previous printer I owned)...
If anyone has any idea, that would be much appreciated
Thank you in advance

Do the sensible thing, as you say neither Preview nor Pages print, try other programs eg TextEdit. If none of them print then it is a System problem and very likely the printer drivers are AWOL or were never installed.
Go to Samsung's website and download their software for the Mac:
http://www.samsung.com/uk/consumer/print-solutions/print-solutions/mono-printers /ML-2160/XEU-support
http://www.samsung.com/uk/support/model/ML-2160/XEU-downloads
Peter

Since I got my new fixed disk my scan function doesn't work (HP Photosmart Premium All-in-One-Drucker - C309g), what should I do

since I got my new fixed disk my scan function doesn't work (HP Photosmart Premium All-in-One-Drucker - C309g), what should I do

Check whether you have the latest driver:
Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US

I upgraded my 3 yr old iMac to Snow Leopard and now my HP C4150 Scanning function doesn't work (not recognized). I downloaded updated Drivers from the HP site, but still no joy. Any suggestions?

I upgraded my 3 yr old iMac to Snow Leopard (OS X 10.6) and now my HP C4150 Scanning function doesn't work (not recognized). I downloaded updated Drivers from the HP site and installed them, but still no joy. Any suggestions?

aspaceman,
Perhaps I owe you an apology. Having re-read that downloading from HP was unsuccessful I feel uncomfortable. Can I suggest you update your 10.6 system (as noted in your profile) to 10.6.8 (if it is not already there) by using the
Mac OS X 10.6.8 Update Combo v1.1 combo update plus any software updates that then apply.

Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr. Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and theref

Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr.
Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and therefore unable to import to catalogue. Anyone has any idea how to make it work. Thanks a lot.

Hi Elba,
Thank you very much for your reply. Not sure, however, that we are talking about the same problem.
I am trying to perform the same function in Lr that I have been doing for many years in the past and has only been a problem in the last few days (possibly coinciding with upgrading to Yosemite, trying to find out whether that is the problem)
I am not intending to sync any files with Creative Cloud but only trying to use 'Synchronize Folder' function in Lr. Normally, I would right click on a particular folder in Lr catalogue and click on that function to check that the Lr Catalogue is perfectly matching my drives where the original photos are actually stored.
The problem that I only started to encounter is that I can see the files on the actual drives but they do not appear in my Lr Catalogue and they are completely invisible to Lr. I simply can not get Lr to recognise them and then import them to catalogue.
If for example, I export images to Ps and then save and close them, they do appear on my drive but are invisible to Lr and I can't get them imported into the catalogue. Import to folder also not producing any results as they are still invisible to Lr.
Completely baffled by it. Any idea what could be the reason?
Kind regards,
Nik

Apple Wireless Keyboard doesn't work in Vista Ultmate?

My Apple Wireless Keyboard doesn't work (not response) on Vista Ultmate but its works properly in Mac OS X 10.5.2...
Should I install the driver in Mac OS first or update the keyboard firmware?
Or install a driver for Windows Vista (I can't find any on web...)
Please kindly help! Thanks a lot.

this problem is fixed, but if anybody has an idea what happened, I would like to know.

Sort function doesn't work E12

the sort function doesn't work half the time on Elements 12 organizer.

What about FUNCTION CLOCK_INFormula
RETURN NUMBER
IS
    l_hours_worked NUMBER;
    l_to_return     NUMBER;
BEGIN
    l_hours_worked := TO_NUMBER(NVL(:ATX_CLOCK_IN,'0'));
    IF (MOD((l_hours_worked - 0.02),0.25) = 0) THEN
        l_to_return := TRUNC((l_hours_worked - 0.02) * 4) / 4;
    ELSE
        l_to_return := TRUNC((l_hours_worked + 0.23) * 4) / 4;
    END IF;
    RETURN (l_to_return);
EXCEPTION
    WHEN VALUE_ERROR THEN
        RAISE_APPLICATION_ERROR ( -20100
        ,   'ERROR, Cannot represent '
        || :ATX_CLOCK_IN
        || ' as a number.');
END CLOCK_INFormula;?
This function assumes :ATX_CLOCK_IN is always positive.
T.

Tap function doesn't work, recovered files in bin etc

Hi
I'm using Mac Book Pro 13' - Mac OS 10.6.8
1) Every time, I switched on my laptop, the one finger (tap to click) function doesn't work (although I have set it up).
I have to go to 'systems preferences' to set it up again.
2) Why is there 'Recovered files' in the trash bin each I switched on my laptop? How to get rid of it?
3) Sometimes when I work using Word 2011, it takes a long time to save (the little icon will be swirling and swirling) and then I had to force quit and lose unsaved info. Why does this happen and how to avoid it from happening?
Pls help me. I'm in the middle of my thesis submission and urgently need solutions to my Mac problems. Thanks!

Reinstall Photoshop. That often fixes the issue.

Preview function doesn't work in Cap2

I just installed Captivate2. In the project I'm working on,
the Preview function doesn't work. Or rather, it works
sporadically... sometimes it does, and --- much more often -- it
does not. What happens instead is, the "generating slides" message
appears, and the progress-bar begins, but then suddenly the
message/progress window disappears, WITHOUT generating the swf file
and without doing any kind of preview. It happens on all the
various options of the Preview function.
It does work about one time in every ten attempts.
This surely isn't acceptable... Anyone else encountering
this???

Hi UncleErnie
By chance have you fiddled with the slide properties of any
of the slides? One of the new options available in version 2 is to
apply navigation options that cause slides to behave certain ways.
So it stands to reason that if a slide was configured to jump to
the end of the movie and the end of the movie option was to close
the movie... Well, hopefully you see what I mean.
Another question I would have is where are you editing your
project? Are you possibly saving it to the company LAN and editing
it using Captivate to make edits while in that location? If so,
this is normally bad practice. Try moving the project locally and
see if the issue resolves.
Cheers... Rick

Why the italic function doesn't works in my Pages? I have already installed the actualization and it keeps not working...

Why the italic function doesn't works in my Pages? I have already installed the actualization and it keeps not working...

drag the other clip 'over' the main clip
the 2nd clip has to be selected/yellow border...
then you're prompted in the Inspector with the several options...

Snapshot function doesn't works in APEX 9.3.2, if the Aero Design is turned on

Hello,
the Snapshot function doesn't works in APEX 9.3.2, if the Aero Design is turned on. Once you click on tools > Snapshot > raster, the window where the displayed 3D model will be white.
The same happens when you click on the taskbar.
There one other option than to turn off the Aero Design?
System:
OS: Windows 7 32bit
APEX 9.3.2
nvidia Quattro NVS160
4GB RAM
Dell Latitude E6400
Thanks,
Olli

Hello,
the Snapshot function doesn't works in APEX 9.3.2, if the Aero Design is turned on. Once you click on tools > Snapshot > raster, the window where the displayed 3D model will be white.
The same happens when you click on the taskbar.
There one other option than to turn off the Aero Design?
System:
OS: Windows 7 32bit
APEX 9.3.2
nvidia Quattro NVS160
4GB RAM
Dell Latitude E6400
Thanks,
Olli

Scroll up function doesn't work at all.

My Blackberry Bold9930 is having some issues and it is my second one this one is about two months old. First of all it has a dead pixel and I know you can not do anything about that. The other issue is with the track pad in some windows scroll up/down function doesn't work at all but left to right works. In some windows the scroll up/down function it will but others will not WHY? Windows that the function will not work that I know of are any pop up winds and the tap page in the browser some options pages etc. Why is this? Yes I have done restarts latest software I have done everything.

Can you scroll using the touchscreen?
Whenever my trackpad scroll "sticks" or seems to not work, it's because I have too many browser windows open, or too many apps open. Which browser are you using?
Try closing apps, closing windows, and leaving open only those you are actually using at the time. A battery pull (quick pull in my case) usually cures a sluggish phone every time for me.

HP 3330 MFP scanning function doesn't work

I have a HP 3330 MFP wirelessly networked to (2) computers via a WPSM54G. I am able to wirelessly print from both computers, but I am unable to scan from either. When I open the HP LaserJet Document Manager, and initiate a scan, I receive a message "hp LaserJet Scan Control Viewer...Unable to communicate with the device. The device is disconnected or powered off." (The MFP is "on", and if I power the HP 3330 MFP "off" and "on", the result is the same.)
If I connect the printer directly to the computer(s) via a USB 2 cable, the scanning function does not work - since the Linksys printer drivers were installed. (I also noticed in Control Panel -> Printers and Faxes, there are some printer functions (ie., Scanning, Fax) have been removed - since the Linksys printer drivers were installed on the computer(s); and Network HP LaserJet 3330 (shared) was added as the default printer.
Since the printing function works fine, I'm wondering if 1.) the installation of Linksys printer drivers on the computer(s), removed or altered the HP drivers/scanning function, 2.) if there is a printer driver that will allow the computer/printserver to recognize a scan command and/ or the printer, or finally, 3.) if the HP 3330 is simply not capable of perfoming all of the functions (scanning, faxing) that the WPSSM54G claims it is capable of perfoming...
Any ideas?
Thank you for your thoughts.
saj

Got it working. The problem was with the firewall (Bit Defender). Once I turned it off, and connected the print server (wirelessly), the scan function worked like a charm. (It would be nice - in a perfect world - if when the print server experiences a problem, the Linksys software/ drivers would identify the cause, and at least point you in the right direction....you know, something like "...can't communicate with device, try turning off your firewall")
Hope this helps someone.
saj

In Yosemite, Magic Mouse double-click function doesn't work

On my iMac running Yosemite 10.10.2, the double-click function on the Magic Mouse no longer works. So to open a folder, or anything for that matter, I must always do click-control ---and that doesn't work for everything. For example, I can't double click on a character in Glyphs, so this renders Glyphs useless. And so on... I have gone into preferences to see if anything was amiss in the settings, but everything checked out fine. Is there a fix for this, or do I have to wait for the next upgrade for Yosemite? Help! Thanks... --Royce

What's the answer to this mouse problem, please? Why does my double-click no longer work on my magic mouse since downloading Yosemite 10.10.2 to my iMac?
What's up Apple?
Mark

HP P1102w Wireless Function Doesn't Work!

Similar Messages

Maybe you are looking for