HP P1102w Wireless Printer will not pair with a Motorola SBG6782-AC Wireless Cable Modem Gateway

I previously had AT&T U-verse Internet using an Arris IPDSL NVG510 Wireless Modem Gateway.  My HP Laptop running Windows 8.1 and the HP LasrJet Pro P1102w Wireless Prnter routinely  & automatically connected to the NVG510 Wireless Network  without any problems over the past two years, and the wireless Printer worked without problems. I recently replaced the AT&T U-verse Internet connection with a 25 Mbs Comcast Xfinity Intrnet connection, using a Motorola Arris SURFboard SBG6782-AC Wireless Cable Modem Gateway.   My HP Laptop running Win 8.1 Pro connects to the Network and accesses the Internet with no problems what-so-ever;  However,  the HP LaserJet Pro P1102w wireless Printer does connect to the Wireless network and I cannot Print at all from my laptop. I have tried all the P1102w Wireless Printer Setup suggestions from the HP Printer Support Site, but to no avail.  I have also updated the Printer Firmware and Loaded the latest Full Product Installation & Driver Software.  I have tried and re-tried these suggestions over the last two days, but with no luck. I would greatly appreciately any help from the  experts  in this Forum.  to get the printer to work wirelessly, since we also  wirelessly print to this printer from  IPads and other wireless laptops.  

Hi , I see that you are having issues connecting the printer to the new router. I would like to help you. I would reset the printer first to clear out any previous network settings.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise. Print out a configuration report and make sure the SSID and IP address are cleared.
Printing a Configuration Page. If the network name has any spaces or special characters, the printer may not recognize it. The printer is only capable of sending/receiving in the 2.4 ghz band. If it is set to 5 GHZ network you may need to change to 2.4 ghz. (rename the 5 ghz or shut it off)
The WPA key setting needs to be on AES to work correctly not TKIP.Multi casting needs to be turned on.
Firewall on router has to have open ports for printer.
If you have Mac Filtering you need to give printer hardware address from Configuration page.You might need to contact your router company for further assistance to check those settings. Try running the Wireless Configuration Wizard from the HP software to configure the printer over the network. If you appreciate my efforts, please click the 'Thumbs up' button below.If you have any issues, please let me know what steps you have taken and the results. Thank You.  

Similar Messages

  • My wireless hp printer will not communicate with my hp pc

    my wireless hp printer will not communicate with my pc

    Please read this post then provide some details. What printer model? What operating system? How is the printer connected - Wireless LAN or bluetooth?
    Running the diagnostics at http://www/hp.com/go/tools may help resolve the issue.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Wireless keyboard will not pair with computer. Unable to submit password.

    My wireless keyboard will not pair with the computer. Now I am unable to submit the password in order to access the computer.

    What version of the Mac OS are you running (from "About this Mac" under your Apple menu)?

  • Macbook pro will not pair with Vizio sound bar.

    Macbook will not pair with Vizio sound bar. It has paired and worked fine in the past. in the menu bar at the top of the screen it says it is connected but it is not. when I open the bluetooth preferences and try to pair it says pairing failed. any help would be great. thanks.

    Me too. sigh
    All was well until this afternoon, when I swapped out the batteries on my trusty old Microsoft IntelliMouse Explorer for Bluetooth, which has worked flawlessly for me for a few years now. After I put new batteries in, my MBP wouldn't recognize it. I went through the Bluetooth Setup Assistant, and it "saw" the mouse and properly listed it as "Microsoft Mouse". I hit "continue", of course, and the Assistant said "Pairing with your Bluetooth mouse". It got as far as "Connection established" (and I saw the mouse appear in the Bluetooth preference pane", but then I got the dreaded red words: "The pairing attempt was unsuccessful. Make sure your mouse is in range of this computer, turned on and "discoverable." Etc., etc. I made sure of all of those things and tried again, many times, with the same failure every time. I tried different batteries, rebooted the Mac, and so on. No luck.
    Figuring my mouse was dead, I went out and bought a Kensington Slimblade Bluetooth Presenter Mouse, brand new, never been paired with anything. Same problem!
    Also, I can no longer get my Palm Treo 650 to sync via Bluetooth. It used to be a little flaky (often complained that the port was in use by another application), but rebooting the Treo always solved that. Now, it doesn't.
    One trusty old mouse suddenly stops pairing, one brand-new one refuses to pair, smartphone won't sync any more. I haven't installed any system updates or anything else since the Microsoft mouse worked. The only weird thing going on is that I'm having massive network connectivity issues with my broadband connection (probably a flaky cable modem), and a couple of days ago I bought a new Airport Extreme a/b/g/n wireless router, which is at the other end of the house from my computer and now-defunct mice.
    Very bizarre. Can the Bluetooth chip or antenna in a MacBook Pro burn out or otherwise fail?
    Puzzled and frustrated,
    :ian

  • My bluetooth keyboard (Macnus 3.0) is recognised by my iMac but will  not pair?  I have paired it with my iPad using code 8310 but it still will not pair with my iMac.  Can someone help please?

    My bluetooth keyboard (Macnus brand - bought recently in Thailand)(similar to Mac small keyboard) will pair with my iPad using code 8310,and is recognized by my iMac but will not pair?
    There are very scant instructions with the keyboard and no mention of any code (the code was prompted by my iPad).
    I have followed the instructions but it still will not pair with my iMac!
    Can anyone help please?
    My iMac is 20 inch  Mid 2007 OSX10.9.1 4GB RAM

    Hi All, thank you for you suggestions.  I have been unable to find any website for the maker, but have looked at several Thai/cambodian sites incl <http://www.buycoms.com/Article/8435/index.asp>  which mentions the keyboard being suitable for tablet or windows.  No mention of iMac!  although the box is branded to indicate Mac compatable.
    I'm thinking that maybe it just will not pair with an iMac.
    Ill keep looking for the maker website, which might come on later in the future? maybe?
    thanks again.

  • Since upgrading to OS Mavericks, my iPhone 5 will not pair with my iMac.  Any solutions?

    Since upgrading to OS Mavericks, my iPhone 5 will not pair with my iMac.  Any suggestions please?

    Yes, it did.  I have not had any problem with my iPad pairing, just the iPhone.  Thank you
    Pam

  • Bluetooth will not pair with Moto Droid4

    My Droid4 has will not pair with either my "Verzion" Jabra VBT-4050 nor my Jawbone Icon.  Both these earpieces paired with this phone before, but will not now.
    Makes no sense to me.
    Thanks...Andy

        westa510b,
    That can certainly be confusing since it previously paired just fine with your device. We will be happy to take a closer look at this matter with you. Have you attempted to reboot the device? Tried deleting the bluetooth connection from the device, then re-establishing connection? Any changes recently to the devices software or additions of an application when you first noticed this issue began?
    EfrainM_VZW
    Follow us on twitter @VZWSupport

  • HT204368 bluetooth stopped working and now will not pair with any of my devices ?

    bluetooth stoped working and now will not pair with any of my devices? any suggestions?

    Hello, oscar302. 
    Thank you for visiting Apple Support Communities.
    Here is an article that you may find helpful with this issue.
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    Cheers,
    Jason H.

  • My blue tooth will not pair with windows 8.1

    hp envy m6 notebook pc  having problems with my bluetooth will not pair with speaker after up graded to 8.1 ,and my simplepass dosent work eather.

    Hello, jpalazzi
    Welcome to the HP Forums.
    I see that after upgrading to 8.1, your having a few issues with the notebook. I will try to assist you with this.
    If you haven't you may need to update the drivers.
    You can also try these documents:
    Using HP SimplePass Fingerprint Reader (Windows 8)
    Using Bluetooth Devices (Windows 8)
    If you require further assistance, please provide the model and product numbers for your notebook.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • IPhone 5 will not pair with Uconncect since 8.1.1 update

    iPhone 5 will not pair with Uconnect since 8.1.1 update.  How can I fix this?

    Apple would "not" replace my Iphone 5 till went to dealer and had my bluetooth on u connect system updated. Advisor acted like I just come from the planet Mars when I told him what I needed. So a tech advisor went with to my vehicle and connect his 4S then went and about a minute flat "paired" my iphone 5! I seen him go through a step that even the manufacter's manual did not even mention to "pair" an iphone using bluetooth! I then asked what he had done and so he showed me to successfully start the "pairing" process the four digit code he used for the u connect and on the iphone screen came up displaying u connect and just to the right it says "not" paired. I had been there around twenty times myself! He then pressed the "not paired" display and when he did the keypad popped up and the advisor put in the "same" four didgit code that he originally had used to start the pairing in uconnect and then press the "complete or done" button on the iphone keypad after doing this the u connect displays "pairing process has begun" and less than a minute it did! All the phones including my 4GS I "never" had to do that and I had "never" had a pairing problem before so to me it must the new IOS 6 system!

  • 525G2 will not pair with one of my Bluetooth headsets

    My Voyager Pro+ died last week and now my 525G2 will not pair with a Voyager Pro UC that I had laying around.  It can see it, but when I enter the PIN code it says that it will not pair.  The same headset will pair with my cell phone, so i know it's not the headset that is the problem.

    What is an "expense bluetooth". Does it have a brand name and model number? is it compatible with the iPhone? Have you put it in pairing mode and paired it with the iPhone? Has it ever been paired with another device?

  • Will not pair with iphone

    I just downloaded the new iTunes today -   1/15/2013 and it will not pair with my iphone... help

    I still can't see my iphone icon or anything.... any other suggestions??  I really appreciate everyone's input

  • I can detect my Bluetooth devices using a BLE scanner and it says they can be connected but - My 5S will not pair with these devices

    I can detect my Bluetooth devices using a BLE scanner and it says they can be connected but - My 5S will not pair with these devices

    What devices?
    Iphoen supports bluetooth for stereo headsets/speakers, handsfree telephone devices, some keyboards, some apps from the app store and interenet tethering if provided by your carrier.
    It does not connect to computers, other phones,etc.

  • HT2188 my iPhone will not pair with my bluetooth even though it finds it available? any ideas?

    My iPhone will not pair with any of my bluetooth devices even though it recognizes them.  any ideas?

    iPhone supports a limited Bluetooth profile
    Check this list and your other Bluetooth devices
    iOS: Supported Bluetooth profiles

  • IPhone 4 Bluetooth will not pair with Jawbone Icon,  Jawbone 2

    Just got my iPhone today and am more or less thrilled to have it. The only problem (other than the antenna issue, which the bumper fixes beautifully) is that Bluetooth will not pair with any of my Bluetooth devices. When I turn on Bluetooth on the phone and turn on the headset, iPhone says it's "searching.." and "now discoverable" but it never discovers anything, let alone pair up. The Bluetooth on my MacBook recognized the iPhone and I was able to pair them, but no luck on the Jawbones. Sounds like a JB problem, but I'm wondering if anyone has had this problem and if there's a fix via the iPhone.

    On the icon, turn it off and hold button down while sliding the power switch on. This should put it in pairing mode. Then go into your i4's bluetooth menu and give it another go. Also, Jawbone has recently updated the firmware for the Icon so you need to load it as well. I have the icon and a Jabra cruiser and both work/paired fine. You may want to try rebooting phone and retrying as well.

Maybe you are looking for

  • Issue with Shopping cart out of template

    Hi all, is there any possibility to find out, if a shopping cart is created out of a template? Background: I want to check in Check BAdI, if the shopping cart is created from a catalogue or if it is "just" created out of a template. I cant find a sta

  • X-Fi XtremeMusic: Linux beta driver crashes on kernel 2.6

    First i uninstalled the X-Fi drivers, then i updated my kernel to version 2.6.26 and did a new install of X-Fi drivers. Installation was successful, but while booting i get some oops messages. Is it possible for me to fix this? And how long i have to

  • Can u get software that shuts down computer

    can u get software that can log off a user after 1hr or 2hr or limit a user to 1-2 hours per day on a macbook air/pro?

  • Tablespace having less than 5 Gb Fress space script

    Hi DBAs, Can anybody provide me the sql script to monitor tablespaces having less than 5 GB Freespace? And also a script to monitor segments which are having less than 5 GB freespace? Both of them are in autoextendable tablespaces. DB=10.2.0.4 Thank

  • Char arrays, spliting

    am new to java programing. am trying to write a simple hangman game, that asks a user to pick a topic and then takes the elements in that topic i.e. elements in an array an picks one at random, everything up to this point works well. When i try to sp