Hp p6367c front panel usb ports: how do I access these?

There is a button in front along the side that I assume is supposed to open the expansion bay and provide access to front panel usb ports, but nothing happens when I press this button.

Please look the upgrade and service manual page 13. You will notice the DVD drive, the empty 2nd CD/DVD bay, maybe the pocket drive (if so equipped). Below that is the mystery USB ports, and audio ports.
The panel likely has a small tab, and the access panel flips up, or slides up/down. Without knowing the exact face plate design, it's difficult to know. But if you look at the manual, the mystery will be exposed.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Similar Messages

  • Z87-G43 Board Front panel USB Problem

    I have installed the board and windows 7 64bit
    Updated the Bios and checked everything I could.  I do NOT get the connect tones from anything I connect to the front panel USB ports.  I have used 2 (KNOWN GOOD, works on other machines) connector sets with 2 ports each, and ALL of the ports have the same symptoms.  All of the usb devices have the connect tones when inserted to any of the rear ports.  I have not tried the USB3 port for the front because I do not have the wiring and related header connector.  My phone, (Samsung GS4) when connected to the rear ports always opens an explorer window showing the Ext SDCard and the Internal memory.  when I connect to any of the front panel ports, no sound, no pop-up of explorer, but I do see the device when I manually open explorer and can open the connection manually.
    I am at a loss as to what is not right and how I can make it work correctly.  If anyone can give me any information to correct this, I'd be very grateful.  (Tech Support was no help)
    Thank you, and Aloha From Hawaii!

    Thank you for your reply.
    I have an older Antec Case and I have tried a brand new front panel connector I got from Frys and it acts the same Way.  the only difference is that the connector is a one piece assembly that connects directly to the mobo header pins. the one in the case has individual pin connectors.  both systems end up with the same scenario.  When I plug in a thumb drive, there is no connect or disconnect sound and I still can manually open explorer and access the thumb drive or my phone but nothing pops up to signify any port access.BTW, I am a systems engineer and have spent the last 13 years building machines for a transportation company (bus)  My previous board in the same case used the front panel connection and it worked just fine, but since the board died and was only supportive of XP I decided to upgrade to Win 7 64bit and have 16gb ram.  All the rear connectors work just fine, but I need all of them so have to use the front panel connection for phone, and thumb drive access.  I suspect the mobo has a design problem.  The tech support person had no suggestion to correct this problem too!  :<(

  • Front panel USB - Where to hook up?

    I've just put together a system using the 845GE Max M/B. I would like to make use of the front panel USB ports on the case, but can't figure where to plug them in. I'm using the USB 2 card, and there's another USB jack on the M/b...
    Any ideas?
    Thanks,
    Wedge

    Looks to me like JUSB1 or JUSB2. It's in the manual.

  • Problem with front panel USB connector

    Motherboard: MS-6750
    I have a problem with my front panel USB connector JUSB2 not working.
    I have checked the connection to be sure that it is oriented correctly.
    I also made sure that it was enabled in the BIOS.
    Still no luck.  There is not any voltage on this either.
    I see a jumper or pin labeled JGS1 just below the JDLED1...do not know what this is and cannot find it in the manual.
    Any ideas on what this is and how I might trouble shoot the USB connector?

    Which 6570 MB do you have, if its the K7N2 Delta 2 Platinum and came with the Dled bracket try plugging that into that port on the mainboard  and see if those usb ports work as it could be the usb hub itself not working on the front. Hope this helps  Dok

  • Front Panel USB Power

    MSI P4M900M2-L, 945GCM5, G31M-F.
    Does anyone know how to solve the problem when using Internal card reader + Bluetooth device on this motheroard, the Bluetooth can function normaly but card reader can't, when only disable bluetooth then the card reader can funtion. Both devices are plug in the motherboard JUSB 1 Slot (Front Panel). When plug in a USB Flash Drive and a External Harddisk to the front panel usb at the same time, the USB Flash can work but the Extrnal Harddisk can't.
    Any solution for this? Is it the JUSB slot cant produce enough power?
    Thank you

    The Bluetooth and Card Reader are 2 in 1 device that using a slot in Motherboard (JUSB), after login to windows, the bluetooth can function but when insert flash card the system cannot detect the card but when disable the bluetooth then the system can detect the flash card.
    The Front Panel USB problem is when USB Flash Drive and External Harddisk using Front Panel USB slot, only the USB Flash can detect. (With or without card reader also same problem)
    These problem seems like lack of power supply from motherboard and only allow 1 device run at the same time, although trying to change Ram, power Supply, Processor but the problem is the same. Customer claim that the card reader can run smoothly in Gigabyte and Intel motherboard, and dont know why these 3 model MSI 7255, 7267, 7345 facing the same problem.
    What is the best solution to produce more or stable power or to allow these device run properly?

  • Z87-G45 front panel USB is SLOW

    Ive had this computer running for about a year and all of a sudden it is SLOW via the front panel USB connections. The 3.0 port transfers at about 4-8mbs and the 2.0 about the same.
    It use to fly through transfers with the 3.0 up in the 60-80 range.
    This just happened overnight and not sure what to try to fix it.
    Id rather not do a system restore.

    Are you using Windows 8.1 ??
    did you check if REAR USB 3.0 works ok??   

  • My car has a usb port how to download iTunes to usb in mp3

    Hi   My car has a usb port how
    to lownload itunes to usb and make it Mp3 so my car can read it
       Thanks

    Follow these instructions and the ones provided with the USB drive or car.
    (65622)

  • "Content Editing" is not available when I go to the Tools sidebar--how can I access these features?

    "Content Editing" is not available when I go to the Tools sidebar--how can I access these features?  I'm using Acrobat X 10.1.7.  Thanks.

    The headings under Tools are: "Pages", "Content", "Forms", "Recognize Text", "Protection", and "Sign & Certify".  There's also a little icon in the upper right that lets me access some other headings under the Tools menu; those are: "Document Processing", "JavaScript", "Accessibility", and "Analyze".
    I did think about the idea that maybe the Content Editing was a new feature of Acrobat XI, but I found some resources online (http://www.wikihow.com/Edit-Text-in-Adobe-Acrobat) that seem to indicate this was a feature on much earlier version (the link references Acrobat 8 at the bottom).
    Really confused...
    Thanks for your thoughts

  • I changed my email address and now cannot play items purchased with previous email. This only became a problem after I got a new computer. The original email address no longer even exists. How can I access these hundreds of items?

    I changed my email address a few years ago. I did not have any problems after this change until I got a new computer. Now I cannot play items that were purchased under the previous email. I entered the password that I used and it doesn't recognize it. I tried "forgot your password" in every combination possible. I never received any emails at the old email address. Now the old email address no longer even exists. How can I access these hundreds of items?

    The old email address may well still be valid as your iTunes AppleID, however if you have no other email associated with that ID you clearly won't get any automated emails to it.
    I still use an old defunct email for my iTunes AppleID.
    Contact support here:
    http://www.apple.com/support/itunes/ww/
    You may want to try to manage the old ID here:
    https://appleid.apple.com/
    Use the original email address and password.
    AC

  • I miss not having the same fonts as cs3 ie Bradshaw, Lucinda and papyrus. How can I access these.

    I miss not having the same fonts as cs3 ie Bradshaw Handwriting, Lucinda and Papyrus. How can I access these on cs5? I have not found the fonts for this program to my liking.

    I can't find any reference to a handwriting font named Bradshaw anywhere. Are you sure you have the name right? ITC Bradley Hand Regular, along with Papyrus and the Lucida (no "n") family are all included with recent versions of Windows, though, and should be in your font list in CS5 if you are, in fact, running Windows.
    Is this the same machine that has CS3 installed? Did you remove CS3? Do the fonts show up in any other programs?  Indesign can see fonts that are installed in the system fonts, the Common Files > Adobe > Fonts folder, and the private fonts folder for InDesign in the application folder. If the fonts show in CS3, but not elsewhere, they are probably in the CS3 InDesign Fonts folder.

  • Front panel USB connection to MB 990fxagd80v2

    Hi Gents, new member here with some issues on me last build. I assemble my families computers , about one every 5 years. Other than that I am not hot in computers. So when I get into a build I have some homework and studying to do, and some glitches. At this moment my newest machine is up and running Win 7 with a few loss ends. My case is an USB 2.0 era with 2 ports in the front bottom behind a little door. Each USB cable has 3 wires ending in a flat 3 pin female plug. The motherboard has 2 USB male ports, 9 pins each, one coded blue the other red each one has an alignment notch. This MB came with a sack of M-connectors to be an easy transition between the front panel plugs and the Motherboard, so, 2 of the M-connectors are red and blue, and have alignment lugs that appear to be made for the USB ports on the MB. The problem is they do not fit. While I am gentle and careful I don't believe they fit. I have other front panel issues I'll save for another time. My Gazelle case seems to use different nomenclature than the motherboard. But the USBs are the issue now, anyone have some light on this subject? I would also like to convert one of the front USBs to 3.0.

    "Each USB cable has 3 wires ending in a flat 3 pin female plug."
     That can't be right as USB are 4 wire, red, white, green, black. Connectors are 5 or 10 pin plugs with no connection on the 5th pin not used on both types & 9 being the key on the 10 pin plug.
    "I'm not sure is I have a variation from the standard MB or what..."
     Any connectors, MB headers are standard throughout the industry therefore they will be the same from all manufacturers.
    "or is the connection does not use m-connectors"
     You should not need m-connector for USB anyway. m-connector was introduced mainly for front panel connections that had individual wires for each LED, switches and such. The set in the pic I show is from old P35 MB.
     Can you post a photo(s) of the case connectors you have?
     See here how to add photo's: https://forum-en.msi.com/index.php?topic=90789.0
     Personally I use Photobucket to host my pics.
     M-connectors for USB should be clearly marked as such if the MB even came with any for USB. Over the years they have eliminated some and I think the ones for USB were eliminated.
     USB plug:

  • ATV USB Port - How do I Save files to & from ATV

    How do you save files to and from the Apple TV USB port?
    Can you plug a USB drive to the ATV to save and transfer files?
    Thx much to anyone who can help

    How do you save files to and from the Apple TV USB port?
    There is no official use of that port by anyone outside of Apple.
    Can you plug a USB drive to the ATV to save and transfer files?
    You can't without hacking it.
    (38670)

  • Connecting Front Panel USB & the option Bluetooth bracket!! HELP

    Is there anyway to connect both of these modules at the same times.
    According to the manual they both use the JUSB1 connector
    Does this mean they have to be exchanged everytime you want to use either one?
    I am using a MSI KT4 FISR motherboard

    the JBT1 is for the Blue Tooth connector that you dont have, it is not for USB or the Dbracket. If you have 2 USB ports in the front of your computer and they are hooked into the JUSB1 connector on the mainboard than you have six USB ports in including the four iin the rear of your computer. Six is the maximum you can have unless you add on additional hardware. If you want to connect the D Bracket than you will have to disconnect the two USB ports in the front of the computer and all six USB ports will be in the rear of the computer.
    Hope that clears it up.

  • How do you safely remove hardware from USB port, How do you safely remove hardware from USB port

    How  do you remove hardware safely from usb ports? i cannot see any icons located on my screen

    What kind of hardware?
    Only drives need to be "safely" removed in Mac OS X. If they are not on your desktop open a Finder window and they will be in the right hand column

  • Broken USB port - how to save Address Book

    I have a BlackBerry 8820 - use it daily - got it Sept 2007.  Well I have not backed-up my Address Book and I have 223 names there. Now my USB port (recharger port) is broken and I really would like to back-up the addresses.  It's a company BB with an enterprise contract I believe-- but I don't think that automatically backs-up individual address books ???
    Is there a way to back up via Bluetooth?  I guess if the USB/recharger port was repaired then I'd be OK - the address book is in memory somewhere-- but it seems after 2.5 years and with other things (like the trackball) failing - they will simply replace this BlackBerry
    Can I move the address book to the media card?  Then I can move it back if I get a new BB.
    Thanks for any comments here.
    Steve

    If you're device is on a BES then it should sync your address book wirelessly if you're using Outlook. If you're using  Notes then it may not sync wirelessly. You can check on the device is the Address Book is setup to sync wirelessly by going into the Address Book, hitting the menu button, then choosing Options. See what your wireless synchronization line is set to. If it's turned on then all your names/addresses should be in your email client.
    You can also check out this kb article about syncing via Bluetooth: http://www.blackberry.com/btsc/KB04132
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

Maybe you are looking for