HP p6674y wireless adapter problems

hello. i'm trying to get my pc's wireless capabilities running but am having issues. i have tried a few things and am hoping you can direct me further. i can buy a wireless usb adapter but the pc comes with one so i am trying to use it first.
the physical card is a ralink rt 3090. on hp's driver download it suggested a different driver than the one linked to this particular card. the hp suggestion would not install and i found that i already had the driver installed that was recommended (netr28x.sys). when i look under 'device manager' in 'network adapters' only the 'realtek PCIe FE Family Controller' is there, not a wireless option. how can i make this happen? i have looked inside the computer and verified the actual existence of the card and have an antennae attached. any help or suggestions would be greatly appreciated. thank you.
kevin

Hi kca77,
Have you disabled the wireless adapter? It should appear in Device Manager within Network Adapters.
Do you have any Device Manager errors?
Try reseating the WIFI card on the mainboard.
Open Network and Sharing in Control Panel, open change adapter settings. Is the WIFI adapter listed?
You either: have a driver configuration issue or a hardware problem
Jaco
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
+++++++++++++++++++++++++++++++++++++++++++++++++++++
H8 1380t CTO, Intel i7 3820
16 GB DDR3
Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
Envy Phoenix 810-150se, Intel i7 4820k
12 GB DDR3
Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
HP 560z CTO AMD Phenom II X6 1090T
16 GB DDR3.
Radeon HD 6570
Win 7 Home Premium upgraded to Win 7 Pro.
HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
12 GB DDR3
Nvidia Graphics
Win 8 Pro
Errare humanum est.

Similar Messages

Airport extreme connecting with xbox 360 wireless adapter problems...help!!

Has anyone linked their xbox 360 wireless adapter to an Airport Extreme? I need help! Neither Apple nor Microsoft knew how to link the two devices. If anyone has successfully been able to make this work, your help will be much appreciated. Thanks guys

Yes - Mine works no problem. I have found that I have to unplug the Xbox360 wireless adaptor and plug it back in occasionally (if the green light is on everything is fine). Are you using the correct WPA Key?

IPhone 3G: Wireless adapter problem

Hi there,
since two days I have problems connecting my iPhone to my wireless network. We have two iPhones and severals other devices in our home network and every device is still working, except this one iPhone.
Is there any chance that the wireless adapter in the iPhone breaks without anything happening, like I didn't drop the phone or something like that. It's just the wireless not working anymore, the network is detected but once I enter the password, it says it cannot connect. Even turning the encryption off doesn't help. The other iPhone still works perfectly.
Has anyone an idea how I can verify that the hardware itself is still working properly?
Thanks and regards,
Seb

Seb S. wrote:
Has anyone an idea how I can verify that the hardware itself is still working properly?
How to verify iPhone hardware is working: http://support.apple.com/kb/HT1650

Z580 Wireless Adapter Problem.

Using Windows 8 and everytime I restart my computer I lose conection to the internet. I run troubleshooting and it resets my wireless adapter (Broadcom 802.11n) and it works again. But it is such a pain resetting the adapter everytime I boot it up. What can I do?

Hi, I've got the same problem as these ppl above. Broadcom 802.11n Troubleshoot problems. When I click on "fix the problem" my computer just stop working-freezing. It was working 8 months perfectly, but not anymore. When I can connect to a network, it's only good for 1-2 minutes, then it's just stops working. I need to close my laptop, then wait and open it, and it's working 1-2 minutes again then stops... Basicly I cannot connect to any network anymore.
Some ppl said try to reset some options like "WakeUP mode"
others writing about the same problem in some other pages, they have reinstalled the windows but they still have the problem.
The thing is, I have my computer in hungarian language, I bought it in Hungary, I have my hungarian warranty on it and because I living in London, I have no idea where to go or who to ask. My laptop is the most important thing in my work, if it's not working, I loose my job.. And because of my language troubles, It would be really hard to explain these problems on the phone with english services(I don't even know is there any service)..
My laptop is Lenovo IdeaPad Z580 15.6" Corei5, 8GB Ram, 1 TB hard disk with Windows 7 Home Premium
Thanks a lot,
Robert

Hp 2000-140ca notebook wireless adapter problem

I've had my HP 2000-140ca since about June 2011
Today I woke up to find that my harddrive was fried. I knew this was coming as error messages came up lately, and I had backed up important files in advance. While not the reason I'm posting this, I am extremely disappointed in the length of time the harddrive lasted.
Anyway, since I can't afford to be without the laptop for the length of time it would take to send it away to have it "fixed" under warrenty (basically any amount of time at all) I decided to just buy a new hard drive and deal with it myself.
Hard drive replaced, windows 7 64 installed, many drivers downloaded and also installed. The one problem I seem to have now is that for some reason the wireless driver refuses to install. I've downloaded several different versions as there's a few for this model on the site but nothing seems to work. It just won't detect drivers and when I run the downloaded file it seems to install initially but then fails to do anything. I'm at a loss here and am already suffering the loss of a portable computer.

Do you know what wireless adapter it is?
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Windows 8 Wireless adapter problem. - WIFI reset itself.

Hello,
I have the same problem, but only after I installed the HP wireless printer (8500 & 8600). Have you found a solution yet?
I have windows 8 now and had no problem with 7.
S

Hi disconnected33,
I see you are having difficulty with your wireless. Please provide me with some detail to help me better understand the issue and the environment.
Is the printer connected wirelessly or with a Ethernet cable?
Is the printer connected directly to a wall outlet or a surge protector? (It is best to connect directly to the wall)
Where is the router located with respect to the computer and printer?
Is it a standalone router or a modem/router?
Does the issue seem to be the printers connecting to the network, the computer or both?
Is this an HP laptop or a different brand?
While I wait to hear back from you, if you have Windows, and if you haven't already tried the HP Print and Scan Doctor, please do so and let me know the outcome. You will see a wrench, a yellow exclamation mark, a red X, or a check mark next each tested item.
Click here to download and run the utility > HP Print and Scan Doctor
If the issue persists, please complete the steps in the following document and let me know the outcome; 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print.
If the issue continues to persist, please use the following document; Troubleshooting Wireless Network and Internet (Windows 8).
I look forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

MSI GE60 wireless adapter problem.

Hello,
I have buyer this model a week ago, and as I'm away from wifi access point I used an adapter for better connection.
The tests I've done have been made with 3 different adapters, including the famous alfa 2w, and different wired and tested in all laptop USB ports.
I have also repeated all tests after installing the drivers of adapters manually.
When I plug the WIFI adapter are continuously switching on and off with the typical windows sound when you plug USB, flashing interval is once every 2 seconds. If at this moment I see the available networks also see blinking WiFi 2 adapter.
I have not noticed any anomaly when using other USB devices such as a mouse or storage devices.
And those 3 adapters work fine on other computers with the same operating system (W8).

In the Realtek HD Audio Manager, in the upper right corner of the screen is a button, "Device Advanced Settings". Click that, and in the new window you should have 2 options on the top and 2 on the bottom. Set the top one to "Mute the internal output device, when an external output device plugged in".
That should fix the issue I believe.

Pavilion G7 wireless adapter stopped working and now will no longer boot.

I bought a Pavilion G7 about 7 months ago.
After a couple of months, the wireless adapter stopped working, it just disappeared from the Device Manager (Win7 Home).
I reset the computer to factory settings and it fixed that problem.
One month after this, the wireless adapter problem returned, I tried to use system recovery to restore it to a previous point, no luck.
I closed the laptop after this, didn't turn it off.
Opened it up and decided to watch a video I had on there, I had to pause the video halfway through (used Windows media player). Came back to continue watching and the screen was black. No lightbar activity, just blackness.
I pressed a few buttons, nothing.
Decided to do a hard reset (hold the power button for 8 seconds) then I left it and turned it on again, the blank screen returned, no signs of life, no boot, no HDD activity, nothing. The caps lock button was on, the wireless light (of course) was orange.
What on Earth has gone wrong? What can I do to fix this?
Thanks.

Hi
You have a couple of options as I see it please find the web link given below might help you fix the issue.
Solve Setup and Internet Connection Issues on a Wireless Network with Windows 7
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Intel 3945ABG wireless adapter

I have a wireless adapter problem.
I am unable connect to my wireless modem using the wireless adapter. I can only connect with the Ethernet adapter and cable. I am unable to renew or release an IP address or get a manually set IP to work on the wireless network. Another laptop computer connects to the wireless modem fine.
I tried downloading and installing the adapter driver from Lenovo, but that failed halfway through unpacking and transferring to the hard drive, with the message "access is denied" on C:\SWTOOLS\DRIVERS\WLLANINT\Vista\Apps\v32\Thumbs.db.
Does anyone have any ideas about my wireless network problem or how to successfully install a new driver?
Many thanks
Gil Lambert

delete the thumb file then try to re-install.
by the way, do not forget to switch the wireless button ( probably front side of your computer ) and make sure you activate wireless by pressing fn + f5 ( also make sure your function keys are working, if not, re-install power management )

Unternehmenslösung gesucht X1 20A8 mit Microsoft Wireless Display Adapter Probleme

1 Business Case
Im Unternehmen kommen ThinkPad-Systeme der Baureihen Lenovo X1 Carbon, T440 und Yoga zum Einsatz. Die Kompaktbauform der X1 und Yoga-Baureihen machen es schwierig diese zur Präsentationszwecke geschäftlich an bestehende Präsentationsgeräte (Beamer) weiter zu benutzen. Dieses ist begründet durch folgende Gerätebeschränkungen: a.) Fehlende VGA-Adapter  b.) Niedrige Bildschirmauflösung 1024x768 (XGA) oder 1280x1024 (WXGA).
All o.g. Notebooks der aktuellen Baureihe erreichen inzwischen eine Auflösung in Höhe von 1920x1080 (Full-HD), der X1 übertrifft mit eine Auflösung von 2560 x 1440 sogar den Full-HD-Standard.
2 Marktlage
Notebooks ab der INTEL-Haswell Chipbaureihe (Bj 2014 und neuer) und Windows 8.1 vorausgesetzt, unterstützen alle samt Miracast ab Werk.
Bei Miracast handelt es sich um eine auf dem HDMI-Kabelstandard basierte Kabellose Video- und Tonübertragungsart bis maximal Full-HD.
Neben Microsoft mit Windows 8.1 unterstütz auch Google den Miracast-Standard, dieses erlaubt im optimalen Fall zusätzlich die Verwendung von Android Smartphones/Tablets ab Version 4.2.1 die Benutzung von Miracast vorbereitete Präsentationsgeräte.
Miracast Technology setzt auf einen Zusammenspiel von Grafikkarten- und Wireless-LAN-Treiber. Die Wireless-LAN-Übertragung erfolgt im Peer-Peer-Verfahren zum Präsentationsempänger. Diese Verbindung entsteht parallel zu einer eventuell bereits bestehende Wireless-LAN-Router-Verbindung in das Firmennetz / Heimnetzwerk oder Öffentliches Internet.
Intel WIDI (Intel Vorgängerstandard) wird durch Miracast ersetzt. aussagen zur folge soll Miracast weiterhin mit WIDI-Empfänger zusammen spielen können.
Während lichtstarke Full-HD-Beamer im Geschäftsumfeld weiterhin eine Investition in Höhe von € 3.500 oder mehr erfordern. So gibt es bereits großflächige TV-Präsentationsgeräte mit 55 und 60"   (140 cm - 150 cm) für unterhalb von € 1.000. Die zweite Gattung reicht für die optimale Versorgung von Besprechungsräume bis ca. 10 Personen.
3 Ziel
Bereitstellung einer zuverlässigen Unternehmenslösung auf Basis von Lenovo Notebooks, Windows 8.1, Miracast Empfänger welches:
Die Benutzung von TV-Geräte für kleine Besprechungsräume bis 10 Personen ermöglicht. - Aufrüstung vorhanden, mit HDMI-Schnittstelle versehene, Präsentationsgeräte für den drahtlosen Miracast-Empfang.
Darstellung einer PowerPoint-Präsentation sowie abspielen von Präsentations-Filme bis zur einer Auflösung in höher von Full HD mit 1910 x 1080, für die Rückwärtskompatibilität aber auch weniger und somit 1024 x 768 und 1280 x 1024.
Obwohl Miracast eine Tonübertragung von bis zu 5:1 unterstütz, so wird eine 2-Kanal-Stereoton als ausreichend angesehen.
Der Microsoft Wireless Display Adapter ist hat eine späten Martkeinritt und ist seit Sept 2014 auf den USA am Markt. In Deutschland ist dieser ab 01. Februar 2015 im deutschen Microsoft Store zu beziehen. Presseberichte zu folge gibt es keine Probleme.
4 Problembeschreibung
Dieser Thread beschäftigt sich allein mit eine Miracast Verbindungskombination bestehend aus:
Lenovo X1 Carbon Type 20A8 - Bios GRET43WW (1.20), Windows 8.1 Professional 64-bit - Build 9200
an
Microsoft Wireless Display Adapter - MicroosoftDisplayAdapter_C8 - deutsche Lieferung aus dem Microsoft Store mit Lieferdatum 2.2.2015
Aktuell ist ein Verbindungsaufbau mit Video- / Tonübertragung zwischen beiden Geräte nicht möglich.
4.1 Verhalten beim Verbindungsaufbau
Verbindungsaufbau wird initiiert
über Charms-Bar -> Geräte -> Projiziern -> Mit einer anderen Anzeige Verbinden – Auswahl der Gerät „MicrosoftDisplayAdapter_C8“
Verbindungaufbau beginnt
Computername erscheint am externen Bildschirm mit Meldung "Verbindung wird aufgebaut"
Miracast-Treiber werden korrekt und vollständig übertragen auf X1, diese kann betrachtet werden unter unter Charms-Bar -> Einstellungen -> PC-Einstellungen -> PC und Geräte -> Geräte
Nach einiger Zeit erscheint eine Abbruchmeldung.
3. Lösungsverlauf bisher…
3.1 Review Intel/ Miracast compatibility list unter http://supportkb.intel.com/wireless/wireless-display/templates/selfservice/intelwidi/#portal/1026/ar...
Intel Core i7-4600U Haswell CPU 2.10 Ghz - OK
Intel Wireless Adapter - Intel® Dual Band Wireless-N 7260 - OK
Intel HD Graphics Adapter - OK
3.2 Used Intel Driver Update Utility and updated
a.) Intel HD Grahics Driver for Windows 8.1 from 10.18.10.2960 to 15.36.14.64.4080
b.) Intel PROSet /Wireless Software and Drivers from 17.13.2.2 to 17.13.11.5
c.) Intel PROSet/Wireless Software for Bluetooth from 17.13.2.2 to 17.1.1411.01
3.3 Enable Logging
Um Miracast-Logging zu ermöglichen und zu aktivieren ist es erforderlich das ein Paarung zwischen PC und Miracast-Empfänger bereits erfolgt sind. Bei meinem Szenario war dieses der Fall.
Öffnen des Programm Regedit
Navigation zum Registry-Key [HKEY_LOCAL_MACHINE\Software\Intel Corporation\Intel WiDi]
Erstellung eines neuen 32bit DWORD Key namens "LogEnable" d.Wert setzen auf 1
Folgender Ordner auf der lokalen Festplatte erzeugen C:\Temp
Nach dem start einer Intel® WiDi/Miracast* Sitzung wird eine Logdatei erzeugt Bei mir C:\Temp\WiDiWinNext.20150207.143059.wdl
Die Logdatei ist kryptisch, und dient lediglich den Intel-Support.
4. Zusatz wissen.
a. Netgear Push2TV (PTV3000)
Test von Mitte 2014 – Zuverlässig im Verbindungsaufbau. Probleme bei Bildpropotionen wenn Auflösung niedriger Full-HD.
b LG-Systeme – Lenovo X1 läuft erfolgreich gegen folgende Miracast-Empfänger.
LG PF80G LED Beamer – Miracast integrierter ab Lichtschwacher 1000 Lumen Full-HD Home Beamer für < € 1000
LG55LB700V Full-HD TV – Mediamarktgerät mit integrierten Miracast-Empfänger
Geräteauslieferungen aus 4. Quartal 2014 – Test aus Januar 2015 - Verbindungsaufbau ist zuverlässig. Bild und Ton ist gut. Mauszeiger ist verzögert.
c. TVPeCee HDMI-Stick MMS-895mira+ Android basiert mit Miracast und iOS-Mirroring Kauf aus Nov. 2014, Test aus Dezember 2014.
Von 3 getestete Lenovo X1 läuft ein Gerät einwandfrei, 2 Geräte haben Probleme mit Verbindungsaufbau – Problem verhält sich wie oben beschreiben mit dem Microsoft Wireless Adapter.
d. Miracast Recierver für Windows
Im standard kann Windows 8.1 lediglich per Miracast senden. Der erste Miracast reciever für Windows 8.1 Liefert die Firma Airserver seit Dezember 2014 aus. Bisher war Airserver bekannt für Lösungen auf basis von Apples Airplay. Bisher habe ich hiermit noch keine Erfahrung.
e. Actionic ScreenBeam Pro Business Edition - Eine bisher durch die Firma Microsoft bevorzugte Lösung steht mit einer zweiten Miracast-Gerätegenation in den Startlöcher. Es handelt sich um eine Baureihe mit Enterprise-Unserstützung. Bisher nicht lieferbar.
5. Frage an die Community
Nach meiner bisherigen beaobachtung steckt Miracast (oder der Lenovo X1) noch in den Kinderschuhen.
Es wäre spannend zu erfahren welche Erfahrungen andere Community-Teilnehmer bisher mit dem Thema gemacht haben.

also....
ich habe einen Carbon X1 20A7005RGE und bei mir läuft alles anstandslos...
(Netgear Push2TV PTV3000 ,Microsoft Wireless Display Adapter etc..etc..).
melden sie sich bei mir ...ich weiss wo der fehler liegt.....der liegt bei ihnen sprich in den einstellungen..
und das hat überhaupt nichts mit Lenovo X1 oder Microsoft..oder Intel zu tun... etc..
mfg....Semy

WRT300N & Wireless G Adapter Problem Fix!!

I'm posting this message again with a better "message subject" because I believe it will help a lot of frustrated purchasers of the WRT300N Router. Please excuse the double post!!
Unbelievable. I cannot tell you how long I had to work on getting my wireless G adapter to recognize my new WRT300N router network!! Very frustrating. I tried just about every suggestion from all of you wonderful forum participants (just where is linksys tech support in all of this?) and just couldn't get the thing to work until.....I did a combination of things, one suggested here, and another on the Microsoft knowledgebase support site. Here they are. First, Microsoft says your wireless G cannot communicate with your WRT300N because the RTS threshold and Fragmentation threshold settings are not the same. If you have taken Linksys' suggestion to lower your advance wireless settings so RTS and Fragmentation are "2304", you must also change your wireless G card adapter RTS and Fragmentation settings to "2304", mine were defaulted much higher at 4906. Then you should take the WONDERFUL advice of "Shoemaker2006" who posted the following back in July of 2006:
"...I figured out that the wide band does not really cover the G range but only the N range sort of like a donut with the hole in the middle. When the settings are in mixed mode and wide band the G range is only covered on the outermost part of the G range next to the N range. When in wide band and only N mode the G range is not even addressed. To get the G strength you jave to have it in G mode only and Short band to address the G range. Also have it on channel 11 if possible to not have wireless phone problems. With these settings my network is rock solid (WRT300N + 3 WUSB54G adapters). As far as the N desktop adapter goes it probally will have issues in mixed mode since this is a Pre-N architecture router and the range is not N only. I would not suggest the router to anybody looking for N only speeds until the next firmware update which is specific to the N range problems.
Thank you Shoemaker2006! Changing my channel to 11 and selecting "G mode only" gave me the range I needed to make my wireless G card communicate with my WRT300N router. Hope this helps some of you. I won't even bother you with the 25 other things I tried because none of those changes worked. So, match your card and routers RTS and Fragmentation threshold numbers, change the router to channel 11 and select "G mode only". It works!!!

set your gateway on the second to be the IP of the 1st router. that should take care of it.

Wireless Adapter having problems

My laptop Paviion 15-b008TX contains Ralink Radio Model RT3290. I have issue connecting to the wifi.I have tried updating the latest drivers anduninstalled and install back the wireless adapter again, but none of it works.How can i solve this issue? Can I just change a new wireless adapter outside?If its possible what are the wireless adapter model that is compatible with my laptop?

You need to open firewall ports on your cisco router
Port number are (88 , 3074 , 443 , 10070 - 10080)
Use port triggering instead of port fowarding.. You can find this under the application and gaming tab. on the setup page of the router.
Change the MTU size to 1365. Disable the UPnP. Go to Security tab and uncheck the box 'Filter anonymous internet request'.
Make sure that the router firmware is upto date.

Just boot camped mid-2012 MBP using Apple's BootCamp 5.1.5621. However, no wireless adapter is listed in device manager

[In Windows 8.1] When I access the Device Manager, it does not list my wireless adapter as one of the devices available. I have attempted to manually install the drivers from the BootCamp 5.1.5621 file.
I've spent several hours attempting to remedy this but have only found threads explaining how to solve the problem if the 802 adapter is already listed in the device manager.

I recently had some BT issue's in Win8 so I wrote a topic about this subject. Maybe you need to replace the Broadcom drivers as well.
Please have a look here:
Apple Wireless Keyboard Windows 8 problem
Good luck.
Marcel

2g Shuffle crashes wireless adapter

Hello,
I'm a dell machine with windows xp and whenever I plug in my new 2g shuffle I get an error message saying windows does not recognize my device and then it crashes my wireless internet connection. I am using a Linksys wireless adapter on my home machine. I moved my machine and hard wired and the shuffle worked like what you expect from all Apple products! I moved it back and reconnected to wireless plugged in the shuffle, same error message, wireless does not work and shuffle is not recognized by windows or itunes.
Any ideas?
Dell Windows XP
Dell Windows XP 1g shuffle, 2g shuffle, 1g mini, 2 5g 60 gig video

After looking at another post I decided to try a powered usb hub, the shuffle works fine, no problems at all with any other devices using the usb ports. The shuffle works like it should, I just don't understand why that makes a difference, do I have a defective shuffle, is it using too much power from the usb port, should I exchange it?
Windows XP

WUSB54G - Wireless Adapter Causing BSOD

Here is one for the support team. I wanted to connect another PC iwas working on to the internet via my WUSB54G wireless adapter. This was a fresh install, but an old computer. At the point in the installation where the adapter is connected to the USB port, Windows keeps shutting down and giving me a blue screen. Any advice?

Did you try to install the adapter drivers and not the software ? If not you should try that...
Make sure you connect the adapter to a different USB Port(don't use the port to which it's already connected)...
Download the adapter drivers from here: http://home.cisco.com/en-us/wireless?referrer=www.linksysbycisco.com
Once you have downloaded the drivers you need to unzip the file...After you unzip the file you should un-install the adapter drivers/software from Programs menu...Connect the adapter to a different USB Port and reboot your computer...Once the computer is rebooted you should see a message "Found new Hardware"...Select the option Install it from a specific location and click Next, then select Include this location in Search and browse to the place where you have unzipped all the files and select the Driver folder and click O.k...Then click Next and it should install the adapter drivers...
NOTE : This installation doesn't install the software(Linksys Monitor)...
Once the Adapter is installed, Click on the Start button >>> Control Panel >>> Network Connections- Right click on the "Wireless Network Connection" icon and select "View Available Wireless Networks"- If you see your wireless network in the list, highlight it by 'single' clicking on it- Now click on the 'Connect' button below- If your wireless network is secured, it would ask you to provide the network key- Provide the wireless network key and confirm it again in the confirmation box and click "Connect". See if this corrects your problem...

HP p6674y wireless adapter problems

Similar Messages

Maybe you are looking for