Hp p7 1226s + msi gtx 750ti stuck at splash single short beep every few seconds

so thier was a short beep , every 15-20 seconds
and thiers no list of beep codes anywhere for my board.
and then it hangs on splash screen.
ANything i can do?
msi gtx 750 ti tf
and  hp p7 1226s 

I suggest that you contact EVGA Tech Support (1-888-880-3842) for help.  They should be able to get it working quickly.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

  • Hp p7 1226s + msi gtx 750ti - Unsolvde

    so i bought the msi gtx 750ti card, as it was seen on the fourm, as a legacy compatible card, without needing a psu upgrade.
    any thing i should know before it gets here (on order)
    some people saying bios issues?
    the card has that dual bios switch on it
    @ Big_Dave he seems to know a lot maybe shed some light?
    This question was solved.
    View Solution.

    Here is hoping that all goes well!!
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • MSI GTX 750ti Cant pass starting windows.

    MSI GTX 750ti Cant pass starting windows. 
    Just bought a new GPU. It doesnt need a pcie connection. MSI GtX 750 ti twin frozr.
    i put it in my computer. (Psu 500watts)
    Turn on my computer and it wont pass starting windows.
    Would be happy if someone can assist me. 
    Thanks

    Looks like a made a mistake sir. I tried reading some stuff. Lol. Change bios order to legacy and pc restarted. I can hear my pc booting up but no display. Is there a posible fix for this? I cant seem to access bios for display is not available. Teehee!

  • Is MSI gtx 750ti compatible with HP pavilion 500-232el?

    Hi,
    I want to upgrade my graphic card.
    I'm looking for a MSI GTX 750ti.
    is this card compatible with HP pavilion 500-232el?
    Thanks in advance,
    Alessandro
    This question was solved.
    View Solution.

    Hi,
    Since your PC has a version 8 BIOS, then review the below post HP articles.
    HP Secure Boot Windows 8 Topics   Computer Does not Start After Installing a Video Card (Windows 8)
    BTW - most models of the NVIDIA GTX 750 graphics cards should work with the exception of those that require an auxillary PCI-E six (6) pin power connector.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Im trying to restore my iphone 4S, however i keep getting error 1611!, i have tried kicking the iphone out of recovery mode but then i have another problem, it gets stuck on the apple logo for a few seconds then the low battery symbol shows repeatdly HELP

    Hi all, im trying to restore my iphone 4S, however i keep getting error 1611 i have tried uninstalling itunes and everything else related, i have tried kicking the iphone out of recovery mode but then it gets stuck on the apple logo for a few seconds then changes to the low battery symbol then goes back to the apple logo and this continues untill i put it back into recovery or dfu mode, i have tried everything can anyone help me ?? thank you!

    Jai141 wrote:
    ... and im not sure as i brought the phone of someone else..  i will have to ask them
    Good Luck.
    Jai141 wrote:
    Thanks
    You're Welcome.

  • Help MSI GE60 Fan keeps spinning to 100% and down every 10 seconds.

    Hello,
    I just bought an MSI GE60 and after 4 days of using, The fan keeps spinning up and down every 10 seconds even when nothing is running on the laptop. Have tried updating the BIOS and the drivers, but no change.
    Every time i turn on my laptop this always happen. It goes on when my laptop is on. Even if im not doing anything it still keeps spinning up and down. I checked the temperature and its at 40+ C and my CPU usage is normal. Basically im not doing anything and it keeps doing this fan spin up and down.
    Even when the cooler boost is on or off, its still does the same thing, the fan keeps spinning up to 100% and down.
    Do you think this is a software issue or hardware?  It is very annoying to hear the fan go 100% for 10 seconds then back to normal then back to 100% speed again and when i press cooler boost it doesnt do anything. So even tho the cooler boost button is off, it still keeps doing the 100% fan speed and back to normal again. It keeps repeating.
    Can anyone help me solve this problem please? Thank you very much.

    Quote from: reprieve.nagrand on 03-May-13, 08:35:31
    I have already tried uninstalling the S-bar and SCM drivers but still getting the fan noise. Also tried the no-battery and no-power reset for more than 24 hours but still having the same problems. The only thing that worked was changing the values in the RWeverything software. The only problem here is that it will work only until I shutdown the laptop. Once I do a cold boot I have to redo the RWeverything changes again.
    @reprieve.nagrand
    thanks for your case. Can I ask you a few questions more, please?
    1. According to your model id your notebook came with just FreeDos, right? Could you please enter the Bios and go to System Information to confirm that you are using Bios 10F and EC version 14.04 (or 4.04)?
    2. I urgently need a screenshot of your EC-Page within RWeverything after a cold boot without any modifications. Please try to make the screenshot at that time, when you can barely hear the fan anymore during the spin-on / spin-off cycle.
    3. CoolerBoost: with a laptop that has been sitting idle for at least 20mins since last cold boot (no load, please!), can you turn on coolerboost by pushing the button somewhere to the left of the Powerbutton and let coolerboost run for at least 30 seconds. Then turn coolerboost off again and wait for the fan to slow down. Does the fan run continously after applying coolerboost or does it enter its off/on-cycle again. Please try it for at least 5 times and repeat it during other Windows sessions for two times. If this trick works, you are the man to make the video! Please help me out here. Please note, that the coolerboost trick will only work until there is load on the system again. If the fan speed picks up again due to load and slows down again, it will enter the annoying pattern, again.
    4. While still reviewing the case and going through my notes, I came across an entry that I reflashed the EC-Controller with the same firmware one or two nights before the problem disappeared. This happened after uninstalling S-Bar and SCM earlier. So, if you are familiar with DOS-Flashing using USB-Sticks you could try to reflash the EC-Controller, than remove all power sources for at least 20 mins. If anyone else is experiencing the problem, please go ahead and report your findings. But please do the reflash only if you are familiar with such things and of course, please do so on your own risk!
    Current status and work in progress:
    As I haven't gotten hand on a video proofing that simply pushing the coolerboost fan button makes the problem temporarily go away, I am still stuck on there. The coolerboost solution works until the system load increases so much, that the fan level has to be raised. When the system load goes back to idle again, the fan level decreases and enters the off/on-cycle again.
    The good news is I managed to customize a programm called fan control tools to somehow automatically apply the changes in RWeverything via a small GUI. This tool will also allow you to set fan profiles for Office, Games, etc. The bad news is, that this will trigger UserAccountControll at least once and it doesn't reapply after a cold boot or returning from hibernate, yet. I am now currently working on a solution that allows the new fan values to be set by Windows automatically using a batch file. This will apply the new values after a normal Windows boot, but not when returning from hibernate, though.
    However, if you have found your remedy value for the fan issue within RWeverything, you can turn to Svet in the subforum "Notebook Modified & Private BIOS'ses & EC-FW". He will certainly be able to create you a custom EC-FW with those values written permanently in it.
    My case:
    The fan problem with my notebook has not (yet) returned. It has been running without S-Bar/SCM just fine. It can even process all fan profile alterations I have made. So, am I just lucky? While I do believe, that the fans of those notebooks experiencing the issue could be "somewhat odd", I find it hard to believe that my fan really suffered a mechanical problem. Without doing anything mechanical wise, my problem went away.
    @Warner: I promised to present more videoproof of the case, but unfortunately I haven't managed to get a hold on a suitable video, especially since my unit has been running fine for the last weeks. Please be patient, if I have enough evidence I will post it asap.
    One question bothers me though: looking at the EC-page of RWeverything, I was wondering if these are really all values, that the EC handles and checks. Are there any other values, variables that the EC manages and that are not displayed on the EC-page of RWeverything? The reason for asking this, is because I have a video showing the ECpage of RWeverything while the fan does his off/on-cycle and you can clearly see the RPMvalue correspond to the actions of the fan. As you pointed out, the boosts occur because the EC is missing a fan signal, I could clearly see the RPM value at offset 0xCD respond to the actions of the EC. If the controller looks for that value only, it should surely see the RPMs of the fan, as I can see them in RWeverything. So, I was wondering if the EC has other values not shown in RWeverything, that determine if the EC should enter the boost cycle?
    While having another look at that video again, to me it appears as if the EC does this really on purpose. It tries to reduce the voltage of the fan to a point so low, that the fan simply starves. Then it boosts the fan up again. The only question is: why does the EC do that? Is there a leftover setting inside the EC - perhaps from another notebook - where such low RPMs were achievable?
    You can find the video here in this zip-file: http://www.file-upload.net/download-7371226/MSI.rar.html
    In the zip-file you will find three numbered videos, the first one is the most interesting as it shows the annoying fan cycle while the laptop is running idle. In the second one, the user put load on the system using prime95. The third one shows the system while it cools off again after prime95 has been stopped. Sadly, the video is too short as the system doesn't reach its lowest fan state again. The videos were taken in march in Germany, so the ambient temperature is around 20-21 °C or less (normal room temperature in Germany).
    Regards,
    jku

  • MSI GT70 audio (headphone) jack makes weird noise after a few seconds

    I recently got my laptop its an MSI GT70, i plugged in my headphones to the correct jack, and the laptop detects it and all is fine, but then when i play something with audio, it starts playing normally for a few seconds then the audio goes to a weird sound, kind of like everything turns to like an echo sound, i have tried multiple things, like changing the default format (the bits and HZ), and every time i do change it, it goes ok for a few seconds and then turns back to the echo-ish sound. i don't think something is wrong with the drivers tough.

    i know it' been a while, but i resolved the problem finally, it wasn't anything with the drivers or hardware, i few days ago, i wanted my laptop be loud, but i raised the volume and it wasn't really loud as most laptops, so i checked around my laptop then i went to my icons i clicked sow hidden icons to see what was related to my sound i found thx tru studio pro settings in there, i double clicked it, clicked on speakers and realized they were on low that's why my laptop had low sound, so after i resolved it, i went to settings to see what it had to offerm i saw select your speaker setup, it had headphones, external speakers,and built in speakers, i automatically got my headphones and plugged them in, the thx turned from built in speakers to external speakers, then i listened to something and it was still bad, so i changed it to headphones, and it was perfectly fine after than,    , but i still dont know why it turns to external speakers, i think it has something to do with realtekhd, but it's a start, thanks to everyone for the replies

  • My ipod touch is stuck on the apple logo...th spinning logo and beeps every 30 seconds

    my ipod is stuck! the apple logo is on the screen, the other spinning thing is on there too. it also beeps about every 30-60 seconds. after a while of being on it also gets very hot! please help:/

    Hello Melissa,
    Have you tried a hard reset yet?  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.  You may need to try this more than once. 
    Any luck there?
    B-rock

  • Ipad Air update to IOS 8.02( stuck in apple logo; turns blue every few minutes and starts over; itunes does not recognize it)

    Hi everybody,
    i updated my IPAD  bought in october 2013 to IOS 8.02.
    Now the IPAD only goes to the apple logo, every few minutes it blinks blue and starts over. I tried doing the home plus switch thing and it doesnt work.
    Itunes does not recognize the device either.
    Do you have any solution to this issue?
    Regards,
    Guillermo

    Hi Guillermo ..
    Folllow the instructions for recovery mode here >  iOS: Unable to update or restore

  • Re: MSI GS70 2QE: Right Fan powers 0% to 100% every 10 seconds during idle/games/lid

    Thank you for the reply. I successfully updated the bios from E1773IMS.10A to E1773IMS.10F. However did not fix this issue. I appreciate the help and info with the pin hole, was wondering how to reset the battery. I will try to find a solution to contr...

    Quote from: Svet on Today at 19:07:02can you clarify what do you mean by using ME from USB Data Traveler?
    why not stick with 1.8 then? or you need to install 1.A for other reason?
    There's a choice to just...

  • Problems After Installing MSI GTX 760 n760-2gd5/oc

    I had previously bought the MSI GTX 750TI, but decided after a week to return it to get the more powerful MSI GTX 760 card. The 750 had worked without issue with my system when I returned it.
    I installed the 760, and have had nothing but issues. Afterabout 2 minutes, everything locks up and I basically have to restart. The only way I can get anything done is in safe mode. I looked everywhere, installed multiple drive cleaning programs, installed the drivers, re-installed the drivers, to no avail. I downloaded the latest beta drivers from NVIDIA as well, didnt work.
    My PSU supposedly has more than enough power (48A@12V) and I have connected the 2 6-pin connections from it to the card, I didnt need to use the adapters that came with the card.
    Everywhere I have looked, my system meets any sort of standards to use this card.
    Anyone have any ideas?
    Thanks
    My build:
     CPU: Intel Core i5-4440 3.1GHz Quad-Core Processor
     Motherboard: MSI B85M-G43 Micro ATX LGA1150 Motherboard
     Memory: Crucial Ballistix 8GB (1 x 8GB) DDR3-1866 Memory
     Storage: Western Digital WD Blue 500GB 2.5" 5400RPM Internal Hard Drive
     Video Card: MSI GeForce GTX 760 2GB Video Card
     Case: Cooler Master N400 ATX Mid Tower Case
     Power Supply: Cooler Master i600 600W 80+ Bronze Certified ATX Power Supply
     Optical Drive: LG GH24NSB0 DVD/CD Writer
     Operating System: Microsoft Windows 7 Home Premium SP1 (OEM) (64-bit)

    You;re saying that you've used different "driver cleaners" in order to make proper installation. Can you, for me please, use DriverFusion (free is enough) in SAFE MODE and remove the drivers?
    Then without the card inserted and powered, run the PC and see how it goes. Then reinstall it (make sure it's properly seated and power supply cables are also nicely fit in) and run it.
    * Your motherboard supports up to 1600mhz RAM speed. Please downgrade yours in BIOS down to 1600 or 1333 (you WON"T notice any speed difference) but this might have been also an issue with newer/higher range graphics card. Also, is the RAM stick seated in the socket recommended by the manual? I believe it should be 2nd closest to the CPU socket.

  • Issues with GTX 750Ti

    Couple weeks ago I bought MSI GTX 750Ti Gaming Series and it is amazing, but when nVidia release the new Beta driver I started to install it but just when the graphic driver almost was install i have got black screen and my computer freeze. The only thing I could do is hard reset. I tried few times more but nothing different. So I plug my monitor to the on board video on started again but now everything seems ok the beta driver was installed ok. So what cause the problem and is it from the driver or the problem is in my computer.

    Quote from: flobelix on 23-April-14, 19:10:41
    Probably a problem with your pc or a combination of the driver being beta and not working well with your individual setup. Does the driver now work or does the problem presist?
    Well, it works now but like i said i install it properly when I plug my monitor in the Intel onboard video not in my video card and then the instalation was ok

  • One of my MSI GTX 780-fans gets stuck on 100% every now and then :(

    Every now and then (randomly and not very often) one of the fans on my MSI GTX 780 gets stuck on 100% after windows 7 (64 bit) have loaded.
    It is impossible to get it to slow down by using any software or by restarting the computer (or even by turning it off).
    The Only way to get it back to normal functioning is to open the computer and stop the fan with my hands for a while. After that it works like it should, until next time this bug happens.
    Has anyone experienced anything like it?  Can it be solved or is the card broken?

    flobelix will give you the program needed (a link to it at least) and the information of how to so it!
    but he needs 2 things from you!
    1: the serial number of your MSI GTX 780 (leave off the last 3 digits)
    2: a copy of your cards current VBIOS (download this http://www.techpowerup.com/downloads/SysInfo/GPU-Z/ and run it and it will bring up GPU-Z and then click on the little icon at the end of BIOS Version and choose save to file (should be a under 1MB file) then upload it to somewhere like dropbox.com and give us a link to it there)

  • Can't use MSI GEFORCE GTX 750Ti with my P7-1240

    I purchased MSI GTX 750 Ti with a legacy Bios switch. However I am not able to get the darn thing to boot up after the splash screen. I get three tones and the screen goes black. I have found a similar problem on another forum http://h30434.www3.hp.com/t5/Desktop-Hardware/Unable-to-boot-with-new-graphics-card/m-p/3930544/highlight/true#M80840     They mention that there is a window 8 bios update for the board in the p7-1240, but when you go to the HP drivers page there is not a bios update listed. Does anyone have any information with this? My current version is 7.07.

     You have a "Chicago" motherboard and the link that you referenced has the "Joshua" motherboard.  Apples and oranges. Look at the Zotac graphics cards as they are listed as being compatible back to PCI-E 1.1.  Be sure to match it with a appropriate size power supply (300+ watts). The reality is that there is no guarantee that any particular graphics card will work in any particular PC even if the graphics card works in other PCs or even the same or similar model PCs. Know what the return policy is before you buy.

  • Installed new graphic card (ASUS Geforce GTX 750ti. PC stuck at the blue welcome screen

    Hi,
    I just bought the ASUS Geforce GTX 750ti STRIX OC Edition (without external power connector).
    After I installed it, I wont get past the HP welcome screen. It gives one beep 3 times, and then 1 and 2 short before the screen turns black.
    My computer is:
    HP P7-1072sc
    (I have installed a 500w power supply.)
    Running on windows 7
    Anyone have any ideas?

    Hi,
    There is a BIOS update posted for you PC but I don't think that it will solve your problem.  You might want to install it and see if anything changes.
    You may have to RMA the graphics card back to ASUS.  ASUS may be able to flash the BIOS on the card to make it work or replace it with a different graphics card that will work.
    Many of the NVIDIA GTX 750 graphics cards are enabled for a full UEFI BIOS PC and your PC is not at that level.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

Maybe you are looking for