Hp paviion dv 6915nr sound, network, CD-ROM problems

I had problems with sound, network, CD-ROM 3 month ago. Sometimes it worked all together, sometimes not. I mean problems were everytime together. No sound, no network (exept wireless), no CD-ROM. Now it doesnt work constantly. Other parts of my Laptop work correct (HDD, CPU, Camera, Wireless network, Video).
P.S. 1) CD-ROM missing from Device Manager. When I insert a CD or DVD, it tries to read the disc, but nothing happens.
2) Missing Audio device (so i cant install driver)
3) Network device is ok, but it couldnt connect to internet...
Whats wrong? Why it doesnt work exactly all togeher?
Thanks.
OS Windows Vista Home Premium. Many times reinstalled. No sense.

I did miss the comment about swapping with a known working CD/DVD drive. Sorry!
I'm not sure that this is a driver issue, as the CD/DVD drive should at least recognize that there is a disc in the drive. I've made no software changes, checked registry filters, and even uninstalled/reinstalled iTunes betting that the issue was software related. No joy. If yours is like mine, it returns a "unsupported media" error message (although mine is a CD media recognition issue). I saw where someone advised to uninstall the controller entry under the IDE ATA/ATAPI section in Device Manager, reboot, and scan for new hardware. Still no joy for me.
I'm currently looking to do a hardware replacement, and was thinking about upgrading to a Blu-ray drive. Still looking for solutions before having to replace, but everything that I see points to a hardware issue. Still looking though.

Similar Messages

Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem

My XP machine crashed, I reinstalled Premiere Pro 2.0 with Windows 7, and I got the following error: 'The Currently installed soundcard driver does not support Direct Sound Input. Recording audio is not possible.' The soundcard drivers are updated. Any ideas? Here's what I have: AMD Phenom II X4 965 Processor 3.40 GHz 8 GB, 64 bit. Thank you for looking.

Thanks! Though I upgraded to solve the problem, this is good to know.
Bob
Date: Wed, 9 Nov 2011 04:45:42 -0700
From: [email protected]
To: [email protected]
Subject: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem
Re: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem created by Steve-Italy in Premiere Pro CS4 & Earlier - View the full discussion
VERY VERY VERY EASY (now, when I solved the problem, not before...!!!)
Insert Micropone or any jack in Micropone Input or Aux Input, on your sound card or motherboard !
AND NOW YOU CAN USE PREMIERE PRO 2.0
Enjoy
Steve - Italy
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4015730#4015730
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4015730#4015730. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HT204350 New Macbook Pro bought December 2013. Transferred everything from Timemachine backup from Macbook Air with 10.6.8. Failed to transfer "network settings". PROBLEM: neither account can log in. It shakes and refuses (the correct) password. Help

New Macbook Pro bought December 2013. T
ransferred everything from Timemachine backup from Macbook Air with 10.6.8.
Failed to transfer "network settings".
PROBLEM: the two accounts from the Macbook Air cannot log in. It shakes and refuses (the correct) password.
Cannot redo the setup.
Stuck! (With a dead as a doorknob $3000 machine.)
Help!!

New Macbook Pro bought December 2013. T
ransferred everything from Timemachine backup from Macbook Air with 10.6.8.
Failed to transfer "network settings".
PROBLEM: the two accounts from the Macbook Air cannot log in. It shakes and refuses (the correct) password.
Cannot redo the setup.
Stuck! (With a dead as a doorknob $3000 machine.)
Help!!

Sound input plot update problem

Hi,
I am having some problem regarding the plot of the sound input signal. Specifically the problem is regarding the update of the waveform graph i have used.
the update is not continuous mode. And there are gap in the waveform
can anyone help me
Attachments:
Continuous Sound Input.vi ‏20 KB

Thanks! Though I upgraded to solve the problem, this is good to know.
Bob
Date: Wed, 9 Nov 2011 04:45:42 -0700
From: [email protected]
To: [email protected]
Subject: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem
Re: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem created by Steve-Italy in Premiere Pro CS4 & Earlier - View the full discussion
VERY VERY VERY EASY (now, when I solved the problem, not before...!!!)
Insert Micropone or any jack in Micropone Input or Aux Input, on your sound card or motherboard !
AND NOW YOU CAN USE PREMIERE PRO 2.0
Enjoy
Steve - Italy
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4015730#4015730
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4015730#4015730. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Mac connects to wifi, but internet doesn't work. Network diagnostics shows problem starts at ISP. All software is updated and all other devices are able to effectively use the wifi source.

Mac connects to wifi, but internet doesn't work. Network diagnostics shows problem starts at ISP. All software is updated and all other devices are able to effectively use the wifi source.

Hi, KK93.
Sometimes a simple power cycle of the router and Mac can resolve the issue. However, try the steps in the article below to troubleshoot the Wi-Fi issue with your MacBook.
Troubleshooting Wi-Fi issues in OS X
http://support.apple.com/kb/HT4628
Also, see the article below to make sure the router setting have been optimized for performance.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Cheers,
Jason

CD Rom Problems

I having problems in detecting the cdROM in my Solaris 9. When I issuing the command iostat, it show no statistic on my cdROM, it just showing the HDD and others.
<<Question 1>> What actually happened? The cdROM is not detected/cdROM defected or it is not mounted yet?
<<Question 2>> What is the result from command iostat if the cdROM is actually detected?
Example output reflect to the question 2:
Quote:
$ iostat -xtc 5 2
extended disk statistics tty cpu
disk r/s w/s Kr/s Kw/s wait actv svc_t %w %b tin tout us sy wt id
sd0 2.6 3.0 20.7 22.7 0.1 0.2 59.2 6 19 0 84 3 85 11 0
sd1 4.2 1.0 33.5 8.0 0.0 0.2 47.2 2 23
sd2 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0
sd3 10.2 1.6 51.4 12.8 0.1 0.3 31.2 3 31
Hope somebody can help here. Thanks.

You also posted this same question at another forum web site.
It appears your answer is going to be over there.
There's now no sense in duplicating it here.
['CDROM Problems' at www.LinuxQuestions.Org|http://www.linuxquestions.org/questions/solaris-opensolaris-20/cd-rom-problems-652191/]

Why is my iphone 5 having network and battery problems after the ios 6.1.2?

why is my iphone 5 having network and battery problems after the ios 6.1.2?

I also forgot to mention that when it did have power, it wouldn't let me shut it off to try and conserve the battery life. Right when it powered down it would power right back up.

?Bought iphone in a shop sim free, send abroad like a present write all the time incorrect network, what the problem

Bought iphone in a shop sim free, send abroad like a present write all the time incorrect network, what the problem?

What "shop" did you buy this in, and in what country? What country did you send it to as a present? And, as KiltedTim stated, there is a BIG difference between SIM free and unlocked.

Sound with cd rom but nothing else

my problem is my sound works only with my cd rom
and nothing else
running windows me
windows 98 se and windows xp works fine but nothing with windows me
i have loaded all the drivers and updated them
in the device manager it says with a ? mark beside it
via pci to usb enhanced host controller
is this why my sound wont work ?
ms-6738 motherboard
athlon xp 2400 plus processor
512 mb 3200 ddr 400 ram
40 gig segate hard drive
sound blaster sound card
ati rage 128 fury pro video card
400 watt power supply
any information would be very helpful

well guys thank you but im selling this board ,
went to the store and bought a new board
using the same processor though and ram
they were trying to get me to bring it in there and let them look at it
but i had decided to get a new board
not that i didnt like this one , but i have another processor to go with it
1.4 gig duron
thank you
A7N8X-X motherboard
2400 athlon xp plus
512 400 ddr ram
40 gig
60 gig
80 gig
sound blaster
ati rage 128 fury pro video card
cdrw

SB Live 24 + CD rom = Problem, please help

Im using P4 2.4 ASUS MB (Via chipset VT8237)256MB 60GB HD52x Asus CDromSB Li've 24 bitHard disk is primary IDE, CD rom is secondary IDE masters
I have used old creative and Ectiva sound cards very wel in last years. I gat a SB Li've 24bit new card.
I have a dual boot sys, I installed SB drivers in win98se and it worked well. no problem (although sound card specs didnot said its compatible with win98)
then I installed drivers to winXP sp2, it worked well untill i used cd rom.whenever cd rom is reading data sound gets very distorted (sound is from Hard disk files; mp3 wav, ..). I used different players problem remain,in games the sound distorts when cd runs.cant play a Audio CD, sound is too distorted.
I have changed the Sb's PCI slot and booted first the problem was gone, then restarted and problem remained.
I have questined creative support but no answer.
Please help me !!

buddhika wrote:
Im using P4 2.4 ASUS MB (Via chipset VT8237)256MB 60GB HD52x Asus CDromSB Li've 24 bitHard disk is primary IDE, CD rom is secondary IDE masters
I have used old creative and Ectiva sound cards very wel in last years. I gat a SB Li've 24bit new card.
I have a dual boot sys, I installed SB drivers in win98se and it worked well. no problem (although sound card specs didnot said its compatible with win98)
then I installed drivers to winXP sp2, it worked well untill i used cd rom.whenever cd rom is reading data sound gets very distorted (sound is from Hard disk files; mp3 wav, ..). I used different players problem remain,in games the sound distorts when cd runs.cant play a Audio CD, sound is too distorted.
I have changed the Sb's PCI slot and booted first the problem was gone, then restarted and problem remained.
I have questined creative support but no answer.
Please help me !!
If you use cable between CD-ROM dri've and sound card, disable the "Enable Digital Output ...." setting on Device Manager --> DVD/CD-ROM dri'ves --> your dri've name --> Properties --> Properties -tab. If not using cable, then try with cable instead (disable this setting then).
Check if DMA transfer is activated for CD-ROM dri've(s) (try if enabling/disabling it makes any difference).
Disable the Creative CD-ROM detector (service).
jutapa

Ibook reading, writing, importing into itunes - CD ROM problems

I have a 14" ibook G4 with a CD burner. It used to work fine. Now the CD-ROM had not been working properly. A numbe of thing have been happening, consistantly.
With itunes, when I import a disc, it imports with a weird cracking/snapping sound in the background (kind of like an old record) when I play the song back. This is a mojor bummer when trying to import songs onto my ipod from my CD collection.
With disc's that people burn for me (such as wedding photo's) no matter what the format is, whether it be a psd, gif, jpeg it does not open the file correctly, I can't open it in preview, photoshop....nothing.
When I open in photoshop it says, "Can not complete request because an unknown or invalid JPEG marker type is found."
When I try to open in preview it says, "Couldn't open the file. It may be corrupt or a file format that Preview doesn't recognize."
I know it's not a problem with the actual files because I have been having friends take the files from the CD's and putting them on a usb drive for me (from which I can retrieve the pictures just fine.)
When I try to play a DVD , the movie skips a lot and then freezes.
I have run a disk utility repair with no success.
Please, any suggestions?
ibook G4 Mac OS X (10.3.9) CD Burner, DVD ROM (no burner)

I had had the same problem yesterday downloading for a friend and can't figure it out. Any help or info you have would be great!

Airport express and network printer setup problem

I could not find and add my network printer in my work place only when network is connected via my airport express. I can see the printer when the network is connected by ethernet cable. Note: the printer I mentioned is not connected to the USB of the AE, it is a separate network printer with a true IP.
Is this a firewall problem in the airport express unit? I have the same problem with my ThinkPad too.

JACCHE wrote:
I could not find and add my network printer in my work place only when network is connected via my airport express. I can see the printer when the network is connected by ethernet cable. Note: the printer I mentioned is not connected to the USB of the AE, it is a separate network printer with a true IP.
Is this a firewall problem in the airport express unit? I have the same problem with my ThinkPad too.
Have you tried putting the printer's IP address into the "add a printer" dialog box IP view of the Print & Fax panel of System Preferences?
It sounds like your AirPort Express is creating another subnet that is making it hard to access the printers subnet. You might try putting the AirPort Express into "bridge" mode.

Network Home Directories Problem

I am running home directories for my users off our server, and every time someone tries to log in, this message comes up
You are unable to log in to the user account "whatever the account is" at this time
Logging in to the account failed because an error occurred
any ideas?

It sounds like your configuration maybe as follows.
Main Server mounts VTRACK directly and shares it over the network
Multiple Client Servers mount the VTRACK via the Main Server
It has been well known for years that a single Mac logging in to a network home directory will not allow a second simultaneous login when using AFP (or SMB). With NFS it is possible.
What you should be doing is as follows, either option 1 or option 2
Option 1
Build a SAN using a Fibre Channel switch, Fibre Channel connections between each server and the switch, and the VTRACK
Run XSan on one of the servers to manage shared access to the VTRACK
Have each server directly access the VTRACK
Have each Client Server share their connection to the VTRACK via AFP
Have a subset of the user accounts allocated to each Client Server
Then say 25% of the users will login via a particular Client server, and 25% via another, and so on.
Option 2
Have seperate RAID systems (possibly VTRACK) one per server
These would not be in a SAN, they would instead be used as DAS (Direct Attached Storage)
Each server would have its own and share it via AFP
Like Option 1 each client server would handle a subset of the users
Then say 25% of the users would use Client Server 1, 25% Client Server 2, and so on.
All the users would be defined in a single Open Directory system on the Main Server but on the tab which says where their Home Directory is, some would be defined as being on Client Server 1, some on 2 and so on.

Cd rom problem

Event viewer reports error:"cd rom has a bad block".hp620 notebook randomly makes crackling sound on right side of keyboard even wen no cd is inside.help me pliz

Ahposno,
I've searched through Apple Discussions, and a few of the other Mac help sites, but I cannot find any information about a similar problem. Your CD drive may need to be replaced. Have you an Apple Store, CompUSA, or other authorized Apple repair facility nearby where you can take your eMac?
When you look in System Profiler, does your CD drive show up? It should be under Hardware:ATA. Also, have a look at your Console and System logs to see if there are any messages related to your CD drive. These logs also may be found under System Profiler (Software:Logs).
Joe

Network cable unplugged problem with WRT54G

I just got a WRT54G wireless router recently, and experienced some problems with it. There are 5 notebooks in my network using wireless card and 2 PCs connect to the router through cables. The router is with ver 7.00.1 firmware.
The router is working fine, the problem is sometimes it will show "Network cable unplugged" on my PC, and the whole network will be interruptted, the network will be resumed in few seconds and all machines need to get IP from the DHCP server again. It's quite annoying to be disconnected from middle of the work. I don't know what is the cause, seems like the router is re-reading it's configuration. I have tried to refresh the fireware but with no luck. Someone else got this problem before? anyone has a solution for this? Thanks a lot!
Regards,
Leo

Try the following tips to resolve your problem:
Disable the Ethernet network adapter if you are not using it. This applies, for example, when running a WiFi home network with computers that have built-in Ethernet adapters. To disable the adapter, double-click the small Network Cable Unplugged error window and choose the Disable option.
Check both ends of the Ethernet cable connected to the adapter to ensure they are not loose.
Replace the Ethernet cable with a different one to verify the cable is not damaged.
Update the network adapter driver software from the manufacturer's Web site.
Change the Link Speed and Duplex settings (using Device Manager) to use "100 Mbps Full Duplex" or "10 Mbps Full Duplex" instead of Auto Detect.
Replace the Ethernet network adapter
Good Luck,
Ttech

Hp paviion dv 6915nr sound, network, CD-ROM problems

Similar Messages

Maybe you are looking for