HP Pavilian System Fan 90B Error Options Stopped showing up after a few minutes

I've gas thus pavilion g6 laptop for a year and some months now and I got the error message telling me to go to the hp tech center site. I took out the battery last night and left there there still morning when I turned in the computer it said the same thing then I took the batter out really quick then put it back in and the error screen about the fan stopped showing up but i don't think the fan is working, I don't feel any breeze coming from it... I don't know I'd it's fixed... Can I fix it...? Without breaking my computer open?

Hi @CatsRcool
Welcome to the HP Support Forums! I saw your post regarding the problem with the fan. You are going to have to open up the notebook to replace the fan or you can take it to a local technician. If you want to do it yourself here is the Maintenance and Service Guide for your model. On page 75 you will find the part number for the fan and instructions on removing the heat sink assembly which the fan is apart of.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

System Fan (90B) Error / HP Pavilion dv7-4060us

Hi. I have a Pavilion dv7-4060us notebook, Windows 7 Home Premium, 64-bit. I had an overheating problem not too long ago that caused my notebook to shut down on it's own. I bought a cooling pad to help with the overheating, which helped. But now, everytime I start up, it gives me a black screen reading "Operating System has found that a cooling fan has stopped working" or something similar. The error code was "System Fan (90B)." How do I get rid of this error message? Post back here or reach my email at [email protected] Thanks.
This question was solved.
View Solution.

This PreBoot Diagnostics that is indicating there is an issue with system fan. It would be a case of System Fan not running or running at slower speed than it should...
I would suggest, try doing power drain, by disconecting AC adapter, removing battery and pressing the power button for few secs... if that always you to boot to the OS, that Update the BIOS if not than I would suggest contacting HP Tech Support for getting your unit serviced...
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

System Fan 90B Error Message

Hello, I've had my Envy dv7-7320us for about 2-3 years and Just last week my notebook shut itself off in the middle of me working on it. When I turned it back on, there was a black screen that read ...... The System Fan <90B> message that everyone here seems to be getting. I sent it over to a computer shop and they cleaned the fan (it was filthy), and I also gave to ok to replace the fan. So they did that as well. Here we are into the 7th day since the error page occured and the shop tells me that the message STILL appears , even after cleaning and replacing the fan. I dont want them to do anything more , because it sounds like things might get costly and if it's something that I can do myself, I would prefer to just do so. Does anyone know why the message could still be appearing , or what other methods I can take to resolve this problem? I just dont want them to do anything drastic or costly for no reason. PLEASE HELP!!

Some bios's have a error message section that needs to be cleared before the message will stop. If not try clearing the cmos by removing the cmos battery for 15 minutes.

System Fan(90B) error...

I bought an HP 630 Notebook PC one month ago. Now, when it's powerd on, it's showing an error message like "System Fan is not working correctly System Fan(90B)". Though my laptop is currently working but I suspect, soon it will be in trouble due to overheating and it may damage the processor. What is the permanent solution for this problem. I don't want to keep my laptop away for days. Please help me as soon as possible...

HPUSER_XXX wrote:
i've got this SYSTEM FAN ERROR message about 4-5 months back but i completely ignored it and used my laptop normally even though the system fan is spinning faster and became louder but this has gone too far and now-a-days massive ammount of heat is emitted from laptop and its becoming so warm and i cant even palce it my lap and if i try to play any game the FPS is dropping regulary and couln't even play i've tried SPECCY software it shows my CPU and RAM has gone upto 85 °C. so plz do reply
Product name HP Pavilion dv6 Notrbook PC
Product number QB365PA#ACJ
serial number : xxxxxxxxxxx
Thank you for any help you can provide in this situation.
Hi there
I think you have to go for replacement cooling fan/heat-sink assembly otherwise it may damage your board, processor, card etc.
Before that please promptly follow the steps given in this document -- Cleaning vents and fans on the laptop & troubleshooting steps:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01657439
If the document above doesn't work for you, then you may want to consider having the laptop looked under warranty, you can call in--
If you live in the US, contact HP -- http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
If you are in another part of the world, begin Here -- http://welcome.hp.com/country/w1/en/contact_us.html
Hope this helps you out,
thanks,
***CLICK 'ACCEPT AS SOLUTION' TO HELP OTHERS WITH THE SAME PROBLEM, CLICK KUDOS TO APPRECIATE MY REPLY***
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

System Fan 90b error message on startup

Hello!
My cooling fan is not working, this morning i turned on my PC and Error 90b of the Fan came on. How do i fix this?

Dear Customer, Welcome to HP Support Forum and we are glad to assist you It looks like you are having difficulties with regards to the Cooling Fan of your NetbookWe will surely assist you with this According to the message you have posted I suspect this is purely a hardware issue where in your getting "System Fan(90B) - The system has detected that a cooling fan is not operating correctly" message. This is a mechanical fault and the Cooling Fan on your Notebook and needs to be replaced before the Notebook starts up with an Overheating Issue. Causes/Reason for this Issue:1. Sometimes this is just because of Dust, Pet Animals Hair slowing down the fan Perform the below shown troubleshooting steps:Step 01. Turn OFF the NotebookStep 02. Un-plug the Power/AC Adapter and also remove the Battery tooStep 03. Press and Hold the Power Button of the Notebook for a full minuteStep 04. Now let's re-insert the battery back in and plug back the Power/AC AdapterStep 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOSStep 06. Once you get to the BIOS, Please press F5 Key to load setup defaults for the BIOSStep 07. Now let's press Esc/Escape Key. Save Changes and Exit - YesStep 08. Now please wait till Unit loads Windows and then Shut down the Netbook againStep 09. You should clean all the Vents and Openings really good with a can of compressed air Note: If you are still getting the same error we need to replace the fan I strongly recommend you to immediately Contact HP Technical Support over the Phone for further assistance without any delay to get your Netbook Fan replaced and serviced by an authorized HP Certified Engineer You can also Check your warranty Here to verify the warranty status Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on left to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,K N R KAlthough I am an HP employee, I am speaking for myself and not for HP

System Fan (90B) - Need Part # for Replacement Fan

My laptop is booting up to System Fan (90B) error. This is after the fan has been grinding for a while and finally died.
I need to find out the part number for the replacement fan. The following is the information about my laptop:
Model Number: LK184AV
Model Description: HP PAVILIONDV6Z-6100NOTEBO
Serial Number: 5CH1331LZ0
Please help.

(15) Fan/heat sink assembly (includes replacement thermal material):For use only with computer models equipped with an AMD processor: For use only with computer models equipped with an AMD A8, A6, or A4 processorand a graphics subsystem with discrete memory650848-001 For use only with computer models equipped with an AMD A8, A6, or A4 processorand a graphics subsystem with UMA memory650847-001 For use only with computer models equipped with an AMD Athlon, Phenom, orTurion processor and a graphics subsystem with discrete memory640426-001 For use only with computer models equipped with an AMD Athlon, Phenom, orTurion processor and a graphics subsystem with UMA memory640425-001 For use only with computer models equipped with an Intel processor: For use only with computer models equipped with a graphics subsystem with 2048-MBdiscrete memory650797-001 For use only with computer models equipped with a graphics subsystem with 1024-MBdiscrete memory641477-001 For use only with computer models equipped with a graphics subsystem withUMA memory641476-001 Your manual here. http://support.hp.com/us-en/product/HP-Pavilion-dv6-Entertainment-Notebook-PC-series/5111979/model/5138752/manuals REO

System fan 90B issues HP Pavilion g7 Notebook PC Windows 8 64-bit

My computer HP Pavilion g7 Notebook PC Windows 8 64-bit is less than a year old and everytime I turn it on the message flashes the the System fan 90B isn't working properly. This started the first time I used it and stopped for a few months and started again. The fan isn't dirty so I'm not sure of the issue.

Hi,
Please use the following link to fix:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03620929
Hpe this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Touch screen L2105 always stops working after a few minutes

I have windows 8.1 and the touch screen always stops working after a few minutes- ie. the touch operation via USB, the screen itself is OK.Have tried windows switching power saving off, but no help
charsepp

Hello charsepp,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that the touchscreen stops working after a short period on your HP L2105 Monitor. The first thing you are going to need to do is determine if this is a monitor or PC issue. To do this you should try connecting the monitor to another computer and see if the issue persists.
If the issue does not persist it is the computer, and if your computer is also HP I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running? Is the Windows Version on My Computer 32-bit or 64-bit?
If the issue persists when you try the monitor on another computer then the issue appears to be a physical issue and I think it would be best if you contacted HP technical support for repair options.
US support link to contact options for HP products purchased in the US.
Outside of US support link to contact options for HP products purchased outside the US.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. Please help!

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.

ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

CS4 OpenGL stops working after a few minutes of painting

Hi,
CS4 OpenGL stops working after a few minutes of painting. It doesn't seem to have anything to do with the amount I paint. If I save the file, then reopen I can paint for another few minutes before the opengl stops working. Is this a standard problem with CS4? Is there a solution? Thanks! PJ
System Specs:
Windows XP SP3, updated
Latest DirectX & all software updated
Nvidia Geforce 9600 GT 512MB w/ latest driver
Athlon64 X2 Dual 3800+
2GB RAM
Photoshop CS4

Joining the party...
I am having the EXACT same issue, PLUS my Wacon PTZ-430 only works for a fewminutes then, when the Open GL craps out, so does it... but only certain aspects. The cursor still moves, it just will not paint. Mouse will (direct via USB) but the tablet won't. If I delete CS4 prefs, then the Wacom works fine... for a while. Latest Wacom drivers and bee on the phone w them. All is fine under CS3.
From DXDiag:
System Information
Time of this report: 12/8/2008, 15:37:52
Machine name: VM-EDITING
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.080814-1236)
Language: English (Regional Setting: English)
System Manufacturer: VELOCI
System Model: 122-CK-NF68
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz (2 CPUs)
Memory: 2814MB RAM
Page File: 1049MB used, 3652MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
Dual Monitor:
NVIDIA GeForce 8600 GT
Manufacturer: NVIDIA
Chip type: GeForce 8600 GT
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0402&SUBSYS_043910DE&REV_A1
Display Memory: 256.0 MB
Current Mode: 1920 x 1200 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0011.7824 (English)
DDI Version: 9 (or higher)
Second:
Card name: NVIDIA GeForce 8600 GT
Manufacturer: NVIDIA
Chip type: GeForce 8600 GT
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0402&SUBSYS_043910DE&REV_A1
Display Memory: 256.0 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0011.7824 (English)
DDI Version: 9 (or higher)

Recently my computer stops recognizing anything Bluetooth or USB related (wireless or plugged in) after a few minutes of computer use.

Recently my computer stops recognizing anything Bluetooth or USB related (wireless or plugged in, mouse, keyboard, printer, etc.) after a few minutes of use. I don't know if it's related, but recently I upgraded my iMac g5 (2005) from OSX 10.4 to Leopard 10.5 (I was told though, that my computer can handle the upgrade by Apple personelle). Also, I had the model that was released with a faulty power supply, but Apple fixed that problem for me a couple of years ago. My fan is also pretty loud (but has been for some time) and my computer takes longer to boot that it used to (this is a recent issue). I mention all of this in case there's a chance it's connected to the same problem. Any suggestions?

Recently my computer stops recognizing anything Bluetooth or USB related (wireless or plugged in, mouse, keyboard, printer, etc.) after a few minutes of use. I don't know if it's related, but recently I upgraded my iMac g5 (2005) from OSX 10.4 to Leopard 10.5 (I was told though, that my computer can handle the upgrade by Apple personelle). Also, I had the model that was released with a faulty power supply, but Apple fixed that problem for me a couple of years ago. My fan is also pretty loud (but has been for some time) and my computer takes longer to boot that it used to (this is a recent issue). I mention all of this in case there's a chance it's connected to the same problem. Any suggestions?

OpenVPN client stops working after a few minutes

I'm using OpenVPN client, and it works fine but after a few minutes the VPN stops working.
I'm getting these errors in the logs:
Sun May 10 20:55:28 2015 [nrt-c01.ipvanish.com] Inactivity timeout (--ping-restart), restarting
Sun May 10 20:55:28 2015 SIGUSR1[soft,ping-restart] received, process restarting
Sun May 10 20:55:28 2015 Restart pause, 2 second(s)
Sun May 10 20:55:30 2015 Socket Buffers: R=[163840->327680] S=[163840->131072]
Sun May 10 20:55:30 2015 TCP/UDP: Preserving recently used remote address: [AF_INET]110.50.241.72:443
Sun May 10 20:55:30 2015 UDPv4 link local: [undef]
Sun May 10 20:55:30 2015 UDPv4 link remote: [AF_INET]110.50.241.72:443
Sun May 10 20:56:10 2015 [UNDEF] Inactivity timeout (--ping-restart), restarting
Sun May 10 20:56:10 2015 SIGUSR1[soft,ping-restart] received, process restarting
Sun May 10 20:56:10 2015 Restart pause, 2 second(s)
Sun May 10 20:56:12 2015 Socket Buffers: R=[163840->327680] S=[163840->131072]
Sun May 10 20:56:12 2015 TCP/UDP: Preserving recently used remote address: [AF_INET]110.50.241.72:443
Sun May 10 20:56:12 2015 UDPv4 link local: [undef]
Sun May 10 20:56:12 2015 UDPv4 link remote: [AF_INET]110.50.241.72:443
Sun May 10 20:56:52 2015 [UNDEF] Inactivity timeout (--ping-restart), restarting
Sun May 10 20:56:52 2015 SIGUSR1[soft,ping-restart] received, process restarting
Sun May 10 20:56:52 2015 Restart pause, 2 second(s)
Sun May 10 20:56:54 2015 Socket Buffers: R=[163840->327680] S=[163840->131072]
Sun May 10 20:56:54 2015 TCP/UDP: Preserving recently used remote address: [AF_INET]110.50.241.72:443
Sun May 10 20:56:54 2015 UDPv4 link local: [undef]
Sun May 10 20:56:54 2015 UDPv4 link remote: [AF_INET]110.50.241.72:443
My configuration is the following, directly from the VPN provider:
client
dev tun
proto udp
remote nrt-c01.ipvanish.com 443
resolv-retry infinite
nobind
persist-key
persist-tun
persist-remote-ip
ca ca.ipvanish.com.crt
tls-remote nrt-c01.ipvanish.com
auth-user-pass /etc/openvpn/ipvanish.user
comp-lzo
verb 3
auth SHA256
cipher AES-256-CBC
keysize 256
tls-cipher DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:AES256-SHA
What could cause that?

I'm using OpenVPN client, and it works fine but after a few minutes the VPN stops working.
I'm getting these errors in the logs:
Sun May 10 20:55:28 2015 [nrt-c01.ipvanish.com] Inactivity timeout (--ping-restart), restarting
Sun May 10 20:55:28 2015 SIGUSR1[soft,ping-restart] received, process restarting
Sun May 10 20:55:28 2015 Restart pause, 2 second(s)
Sun May 10 20:55:30 2015 Socket Buffers: R=[163840->327680] S=[163840->131072]
Sun May 10 20:55:30 2015 TCP/UDP: Preserving recently used remote address: [AF_INET]110.50.241.72:443
Sun May 10 20:55:30 2015 UDPv4 link local: [undef]
Sun May 10 20:55:30 2015 UDPv4 link remote: [AF_INET]110.50.241.72:443
Sun May 10 20:56:10 2015 [UNDEF] Inactivity timeout (--ping-restart), restarting
Sun May 10 20:56:10 2015 SIGUSR1[soft,ping-restart] received, process restarting
Sun May 10 20:56:10 2015 Restart pause, 2 second(s)
Sun May 10 20:56:12 2015 Socket Buffers: R=[163840->327680] S=[163840->131072]
Sun May 10 20:56:12 2015 TCP/UDP: Preserving recently used remote address: [AF_INET]110.50.241.72:443
Sun May 10 20:56:12 2015 UDPv4 link local: [undef]
Sun May 10 20:56:12 2015 UDPv4 link remote: [AF_INET]110.50.241.72:443
Sun May 10 20:56:52 2015 [UNDEF] Inactivity timeout (--ping-restart), restarting
Sun May 10 20:56:52 2015 SIGUSR1[soft,ping-restart] received, process restarting
Sun May 10 20:56:52 2015 Restart pause, 2 second(s)
Sun May 10 20:56:54 2015 Socket Buffers: R=[163840->327680] S=[163840->131072]
Sun May 10 20:56:54 2015 TCP/UDP: Preserving recently used remote address: [AF_INET]110.50.241.72:443
Sun May 10 20:56:54 2015 UDPv4 link local: [undef]
Sun May 10 20:56:54 2015 UDPv4 link remote: [AF_INET]110.50.241.72:443
My configuration is the following, directly from the VPN provider:
client
dev tun
proto udp
remote nrt-c01.ipvanish.com 443
resolv-retry infinite
nobind
persist-key
persist-tun
persist-remote-ip
ca ca.ipvanish.com.crt
tls-remote nrt-c01.ipvanish.com
auth-user-pass /etc/openvpn/ipvanish.user
comp-lzo
verb 3
auth SHA256
cipher AES-256-CBC
keysize 256
tls-cipher DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:AES256-SHA
What could cause that?

TS2972 moviea stop playing after a few minutes

While movies start playing they stop streaming after a few minutes seems like streaming is trying to catch up any ideas on hiow to solve this issue?

Sorry to hear about the troubles you guys are having with the DVR. There could be two explanations for this. Either the error is within the box or the feed being sent for that channel. To address this if it's a problem with the DVR functioning, please press menu, then go to CUSTOMER SUPPORT, then IN HOME AGENT, then SET TOP BOX AUTO CORRECTION. Let me know if you need further assistance after doing that.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

When trying to upgrade to iOS 6 after a few minutes message pops up: unable to complete download, options cancel or settings? what do I need to change in the settings?

When trying to upgrade to iOS 6 after a few minutes message pops up: unable to complete download, options cancel or settings? what do I need to change in the settings? What have I set in settings that is stopping my upgrade??

Sorry, good network connection, happily downloaded for 15 minutes before this popup appeared... Staying with iOS 5.1.1 for now hoping Apple can sort it..oO

Win7, itunes 11.1.4.62 upgraded fine, however after a few minutes of running itunes will error out and close. Any suggestions on how to fix? (win7 64 bit)..

Event log of error when itunes 11.1.4.62 on Win 7 (64bit) fails after a few minutes of running...
Faulting application name: iTunes.exe, version: 11.1.4.62, time stamp: 0x52ddbf7a
Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521ea8e7
Exception code: 0xc0000005
Fault offset: 0x0002e41b
Faulting process id: 0x257c
Faulting application start time: 0x01cf1d3f842de030
Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: 07712b46-8935-11e3-b0c8-d4bed9950bec
Any suggestions on how to fix?

Hi heartotexas,
Thanks for visiting Apple Support Communities.
To resolve this error, I recommend completely removing and reinstalling iTunes and all of its related components using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy

HP Pavilian System Fan 90B Error Options Stopped showing up after a few minutes

Similar Messages

Maybe you are looking for