HP pavilion 15 model no 15-n211se can support windows 7?

HP pavilion 15 model no 15-n211se can support windows 7?

Hi,
Yes as shown on the following link:
     http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=6762357&
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Adobe CS 2 can support windows 7 or not ? Please help & advise !

    Hi All,
    I am use windows 7 professional, Processor Core 2 Quad, 4GB RAM. After completed install Adobe CS2, activated from internet but I can't use the Adobe Photoshop CS2 & Adobe Illustrator CS2.
    i.    When I open the Adobe Photoshop will prompt the message error is “ Your Adobe Photoshop user name, organization, or serial number is missing or invalid. The application cannot continue and must now exit”.
    ii.    If I open the adobe illustrator will automatic close it.
    When I use windows xp professional is no problem.
    Some people can help me & what I can do ! You's advise is important for me. Thanks !!!

    In addition to what Marian has said, you can be sure Photoshop CS2 has no awareness of Windows 7's UAC (User Account Control) feature, because it's so much older, so when Photoshop is trying to write files into its installation area or protected parts of the registry, it may fail.  What I don't know is whether Microsoft's installer subsystem recognizes the Adobe CS2 installer and makes the appropriate decisions (it does this for many apps).  You may need to use "Run As Administrator" or lower the UAC protection level on your system to get both the installer and application to work properly.
    -Noel

  • Unable to Install Windows 7.0 64 bit on Hp Pavilion i3 Model 15-00B002tu

    Hi,
        This is Related with my Hp Pavilion I3 Model i5-00B002tu, Which Came with Win 8.0 Pre-Installed,Problem is that Iam Trying to Load Windows 7.0 64 bit From Usb but at the end of the installtion it gives me the error "Windows setup could not configure windows to run on this computer’s hardware" i had tried loading the Drivers from "https://downloadcenter.intel.com/download/22194" but the problem still exists, I need to install win 7.0 64 bit 
    Please help me to install
    Thanks  
    This question was solved.
    View Solution.

    Hi:
    The Intel link you posted doesn't work, so I don't know what you have tried.
    See if this works...
    Download the drivers from this link below (first file listed -- 64 bit).
    https://downloadcenter.intel.com/Detail_Desc.aspx?​agr=Y&ProdId=2101&DwnldID=23060&keyword=Intel+Rap...
    Extract (copy) the files onto a usb flash drive without any folders.
    With the flash drive and W7 installation media plugged into the machine, boot from the W7 installation media.
    After you select the install now option, select the Drive Options - Advanced menu, then select the Load Driver option.
    You should now see the storage driver files listed.
    If you check the box, it will only include the compatible driver.
    Follow the prompts and hopefully, W7 will install.

  • HT3696 if i have a 15 inch Mac book pro  2009 model  running 64 bit, can I increase the RAM to 8 Gig?

    if i have a 15 inch Mac book pro  2009 model  running 64 bit, can I increase the RAM to 8 Gig?

    Yes.

  • I need a how to video on assemblying an HP Pavilion G7 model LF161UA Laptop.

    Does anyone know where I may either view or download a video I may view of an HP Pavilion G7 Model # LF161UA being assembled, I have viewed one being disassembled, now I need to view a video assembling one, that is a HP Pavilion G7 series model # LF161UA, need immediately please, thank you - Greg from CFT.

    The end of this one shows reassembly after motherboard replacement.  https://www.youtube.com/watch?v=ZMVW2jniITk Run the video backwards; seriously. Steps are steps in either direction. 

  • What Raw camera files are supported by Aperture Ver 3.6.  I have tried to file a list of compatible camera models, but as yet can't find one.

    What Raw camera files are supported by Aperture Ver 3.6.  I have tried to file a list of compatible camera models, but as yet can't find one.  My OS is OS X Yosemite 10.10.1.  I have recently bought a Canon 7D MkII and have found Adobe Lightroom does not as yet support the 7D MkII.  So I though Aperture may support the 7D MkII because Yosemite 10.10.1 now does.

    Hi Folk,
    I just found the answer to my question.  Yes it is supported with OS X Yosemite 10.10.1.  See the link below and the ***** Note at the bottom of the list.
    http://www.apple.com/aperture/specs/raw.html

  • How to know if my HP Pavilion Notebook can support Super Multi Blue-Ray drive?

    Hi,
    My HP laptop is:
    HP Pavilion dv6-6093ex Entertainment Notebook PC support
    LM610EA#A2N
    How to know if my HP Pavilion Notebook can support Blue-Ray drive?.
    I need to install a Super Multi Blue-Ray drive, with these capabilites::: read and write all types of disc formats in one convenient package: CD±R, DVD ±R ,  CD±RW, DVD±RW, CD-ROM, DVD-ROM, DVD-RAM and Blu-ray disc.
    If it can support, then I must purchase HP Blue-ray device, or I can purchase any other brands, such as  LG 16x Internal Blu Ray/DVD/CD Burner Writer Drive + sata data & power cables .
    First of all: my Optical drive is: LightScribe SuperMulti DVD±R/RW with Double Layer Support, and with the capabilities
    hp CDDVDW TS-L633R
    Media Type DVD Writer
    Name hp CDDVDW TS-L633R
    Availability Running/Full Power
    Capabilities Random Access, Supports Writing, Supports Removable Media
    Read capabilities CD-R, CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW DL, DVD+R DL
    Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD+R DL
    Config Manager Error Code Device is working properly
    Config Manager User Config FALSE
    Drive E:
    Media Loaded FALSE
    SCSI Bus 0
    SCSI Logical Unit 0
    SCSI Port 0
    SCSI Target Id 1
    Status OK

    Anyway, Could you please confirm for me this the Maximum resolution of my VGA is 1366 by 768 pixels, and cannot be extended.
    That is correct.  It cannot be extended.  That is the limit for the built-in display.  Using an external display that is capable of higher resolution might help in that matter but then you loose the portability of the laptop.
    I came across a free BluRay player just this week, it is found here. Leawo Blu-ray player: http://www.leawo.org/blu-ray-player/
     It is the only free BluRay player I have found.
    That is about all I can do to help.  The other possibility would be to get an external Bluray drive that can fulfill all your  expectations, give you lightscribe, and possibly a BluRay player included with the purchase.  It would be much less worrisome on your part and there would not be any modifications to the laptop.
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • My daughter and granddaughter both have the same model iPhone.  I can text my granddaughter but when I try to text my daughter I get the message that she is not registered at iMessage, but I know that she is and gets texts all the time. What do I need to

    My daughter and granddaughter have the same model iPhone.  I can go messages and text my granddaughters phone from my ipad2, but when I try to text my daughter I get the message that she is not registered with I message, but she is registered and gets texts all the time.  What do we need to do?

    Pattypegr wrote:
    The blue bubble will not turn on on the iPad when I try to message her on her I phone.  She has IMessage turned on.
    What blue bubble are you trying to turn on? If you mean that the Send button will not work, go to Settings>Messages>Show Subject Field>Off. Make sure that is set to off.
    If you send an iMessage, the texts between the devices appear in a blue bubble.
    iMessages only work between iOS devices and they are different than the standard text messages that any cell phone can send to another cell phone.

  • HT4972 I have a model FB292LL Ipad. Can I upgrade to os 5?

    I have a model FB292LL Ipad. Can it be upgraded to OS 5?

    See iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
    Tip - Disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • HT1695 Would a iPad wi-fi be converted  to a iPad (cellular model) so that I can get it on the go  anywhere ?

    Would a iPad wi-fi be converted to a iPad (cellular model) so that I can get  it on the go anywhere , not just wi- fi.

    Unfortunately not.  Sell it and buy a wi-fi 3G model.
    Alternatively if you have an iPhone 3G/4/4s it might be possible to use it as a hotspot to connect to the internet if your provider allows this feature.

  • Access model for smart tabs: Can the new tab have a different ACL?

    Access model for smart tabs: Can the new tab have a different access control list then the sources it draws from?
    Scenario: Some lecture content is in a private course viewable to course members only and some is put on a public page viewable to all. Can the content on the smart tab viewable to the public have different permissions?
    Scenario: Public site starts with small number of courses, say 16, located in 4 sections on the main welcome tab. Administrators have edit only rights to the Welcome page and grant editing rights to each of the course pages to others. A few months later the site has more content and decides to change the four sections on the Welcome page to four section pages with courses attached to it. The new pages would have new editors for them. Can the course pages originally located on the main welcome page be restricted to no viewers and smart tabs put in new courses connected to the new section tabs? The thought here is to avoid rebuilding the site as the architecture changes.
    All comments appreciated!
    Bill Corrigan,
    University of Washington

    The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
    There are a couple of places to check for the Ask toolbar:
    * Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
    * Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

  • Is Org model (HR) in R3 can be transferred to CRM?

    hi,
    Is Org model (HR) in R3 can be transferred to CRM?
    Regards,
    babu

    Hi
    Employee Master Data (P) should be distributed to CRM
    HR Org. Structure consisting of Org. Unit (O), Job (C) and Position (S) is to be distributed to CRM
    The Org. Unit, Job and Position should be replicated with the same object ID in CRM system
    A Business Partner in the role (BUP003 - Employee) should be created for each HR Person that is transferred from SAP HR to CRM and this Business Partner should use a custom number range interval setup in CRM
    The Personnel Number field of the CRM Business Partner should be updated with the HR Person number
    Maintenance Phase
    Once the initial Org. Structure and Employee Master data is transferred to CRM, thereafter changes made to the Employee Master Data, Org. elements (Org. Unit, Job and Position) and to the Org. Structure in HR should be distributed to CRM automatically
    Reward if helps
    Regards
    Manohar

  • ERROR: XML parse error: Error on line 1 of document: cvc-elt.1: Can not find the declaration of element 'model'. Nested exception: Can not find the declaration of element 'model'.

    I have install flash builder 4 beta 2 + blazeds 4.00.7548. While try to connect to data service and face a problem.
    When i use a beta 1 that no such probem. please help.
    ERROR: XML parse error: Error on line 1 of document: cvc-elt.1: Can not find the declaration of element ‘model’. Nested exception: Can not find the declaration of element ‘model’.

    Hello All!
    I'm just getting started with Flash Builder 4 and BlazeDS and I'm having this same issue.     I have installed the FlashBuilder 4 beta 2  Build 253292, and Blaze 4  ( blazeds-turnkey-4.0.0.14341 ).       I have also installed the livecycle_dataservices3_modelerplugin_100509.      Upon clicking Data-Connect to data/service and then Blazeds,   I can see my DAO object listed.   However, if I select it I receive the dreaded error.       Now if I code in the remote object manually, in the  .mxml file and run it, all works just fine.        It's only while trying to use the object within Flashbuilder that I have the problem.     I see lots of ideas kicked around for this, and it seems that various solutions have worked for different users.    Can somebody put together a 'cookbook' of just exactly how to set things up to make this work? 
    Thanks

  • HT1446 I need to order a replacement battery for Model A1185.  Where can I get it?

    I need to order a replacement battery for Model A1185. Where can I get one?

    You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
    Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    Or for $129 from The Apple Store  http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY
    I've bought used MacBooks off of eBay for my family, nine of them so far over the last 6 years. I've bought 8 batteries off of eBay sellers, just going with the cheapest. Only had one with a problem, it gave out after 6 cycles. That one was replaced under the warranty by the seller. The only other batteries that have been a problem were Apple branded batteries that started bulging. I've had two of those happen.

  • Find my HP Pavilion Slimline model number

    how do i find my HP Pavilion Slimline model number - when i enter the one on the label it asks if it was purchased in another country.  I'm need to update some programs and this is very frustrating

    Mariaq, welcome to the forum.
    Here is a guide to help you identify your computer:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07555&lc=en&cc=us&dlc=en
    Please click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

Maybe you are looking for

  • Date conversion for internal table

    Hi experts, I have an issue with Date conversion. i have declared my internal table with type same as that of standard table from which im fetching data. The date is coming in YYYYMMDD format and i have to change it to MM/DD/YYYY format. I tried usin

  • Media Browser crashes when accessing XSan

    When using Media Browswer, (premiere or prelude) if I click on our XSAN root on the left, the 'View as:' switches to 'XDCAM-HD' and the program freezes (pinwheel).  I can import items from the SAN and play footage just fine using the import dialog in

  • My password is not working, its the right one, anyone have any ideas?

    A tiny bit of tea spashed on my keyboard today. I turned it upside down and dried it well, and it seemed to be working-playing music, etc, but laterscreens opening really slowly. I turned it off, turned back on no problem, but now my password no long

  • Performing Switchover  Failover

    Most respected experts, i want to perform switchover, failover scenarios in my test dataguard environment. i want to know that 1. What parameters do i need to change in parameter files, NETWORK configuration files ? 2. Moreover my standby db in which

  • Authorizations and multiple hard drives

    I clone my internal drive to an external firewire drive. If I boot off the external drive, is that a change that will require another authorization?