HP Pavilion 17 Notebook PC (Windows 7 Ultimate x64) USB controller not working

I am having problems with my HP Pavilion 17 Notebook PC (Windows 7 Ultimate x64) Intially Windows 8 was installed but I got windows 7ultimate for it and now I'm missing the drivers for it.
I don't know how to fix this problem, I have tried everything. I downloaded an program called DeviceDocter and it downloaded the thing but then an error saying. Your system does not meet the miniumum requirements for this update. Update has been cancelled. (9996). It says AMD USB Controller Driver. It should work on my computer since it's Windows 7 Ultimate x64. Please help me fix my ports. Just my 2 ports on my left side of the computer isn't working. The right side of the computer port is working.

Thanks for the help, but I found the program to fix it. After searching for hours. I stumbled upon this link and it finally worked and the unknown device was only my headset and the other one I just updated by making it search online for the software. Here is the link for other people to use to fix their usb port problems. - http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?javax.portlet.begCac...

Similar Messages

  • Thinkpad L412 Integrated Camera and USB Controller Not working

    My Integrated Camera has disappeared from the device manager listing, and "USB not connected". Further, the USB Controller has an "Unknown Device" with no driver. None of my USB ports work beyond power. I cannot find any drivers or other way to resolve. Any suggestions? 
    Thanks in advance for assistance!!!

    Grab the latest chipset driver package from Intel's download center, and run the setup EXE with the -overall switch.
    https://www.raymond.cc/blog/the-proper-way-to-fully-install-intel-chipset-driver/
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Server 2012 - Windows 8 RemoteFX USB Redirection not working

    I have setup a test envrionment with Server 2012.  RDS has been installed.  Hyper-V, RDCB, RDWeb, and RDVH are all on the same box.  I have a personal unmanaged Remote Desktop Virtual pool with one test virtual running Windows 8.  I have
    enabled RemoteFx USBdirection in Group Policy on every machine involved and forced GP update.
    I can see my devices in the Remote Desktop Connection details on the client (i.e. it shows up under Local Resources/Local devices and resources/More/Other supported RemoteFX USB devices.  Or, if you prefer, I have added  "usbdevicestoredirect:s:*"
    to the .rdp file that the Web Access spits out then I log in to web page and attempt to connect to my published virtual machine.
    The problem is that the devices do not show up anywhere in the virtual machine's device manager once logged in.  Furthermore, there is no Universal Serial Bus node in device manager at all.  I do not have a RemoteFX compatible GPU available for
    hyper-v or the virtual machine, but it is my understanding with Server 2012 and Windows 8 this is not necessary.
    Does anyone have any ideas?  I thought I saw a [email protected] or similar email on one of the blog comments, but I can seem to find the post again, I have scoured the internet relating to usb redirection and remotefx and it is a disorganized mess.
    Thanks.
    Wayne

    The first device I am focusing on is a desktop scanner, an Epson GT-S50.  This device shows up in the client's Remote Desktop Connection details as a "RemoteFx Other supported RemoteFX USB Devices".
    Although, and perhaps I'm a total fool, but, I have not installed Epson's specific drivers for this scanner on either the client, nor the VM.  My client's Device Manager currently shows the scanner under "Other Devices" as "Epson Scanner".  The
    Device Status says that "The drivers for this device are not installed".  My expectation was that this was still enough to redirect the same object (and its condition) to the VM.  At that point, I expected the VM to see and respond
    (in its own Device Manager) the same way, at which point I would then install the Epson-specific driver package on the VM (i.e. without ever having to install the Epson package on the client).
    The second device I wanted to test was a Ezurio BRBLU03 Bluetooth Adpater.  This device's drivers have been installed on the client and works flawlessly, locally.  However, this device is not showing up at all under "RemoteFx Other supported
    RemoteFX USB Devices", even after "usbdevicestoredirect:s:*" was specified.  I suppose this is a separate issue, and I was planning on troubleshooting this next.  For now I just wanted to see a proof of concept that a device that RD can see can in
    fact be redirected.
    I guess I have based my expectations on the experience we had with a third-party USB redirection tool that we tested prior to engaging in testing RDS.
    My client is running Windows 8 Enterprise, and the VM (vhdx) is running the same.  When you refer to the RDC 8 update, isn't that already included in this OS?  In other words, is that only a concern if I were using Windows 7?
    Thanks for your help.

  • HP Pavilion DV7-6190ED Windows 7 64-Bit Recovery not working

    Hello,
    I just bought a new (used as showmodel) laptop at a local store.
    But I'm having a problem with the recovery now.
    What happened:
    When I first booted my laptop and after it started windows, I saw some flickering pixels on the screen. I did some research on that and looked at the computer, and found out that the drivers were conflicting with eachother. After that problem I tried a factory restore and removing and installing some drivers, this didn't work. After that I tried restoring with a minimalistic image (sorry if I misspelled), but when the restoring was complete it said that the restoring wasn't finished. My problem now is that it won't boot Windows anymore, but directly boots into recovery manager. I'm sure that the recovery partition exists and I don't have a recovery DVD.
    I would be happy if someone is able to help me.

    Hi:
    From what you wrote it appears you will either have to purchase a recovery DVD set by reading the info at the link below.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&dlc=en&lc=en
    Or....make your own plain Windows 7 installation disk by following the instructions below (or do it temporarily until your recovery disks arrive).
    If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
    Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
    Use the 25 character product key on the PC to activate the installation.
    The key will activate either a 32 or 64 bit installation.
    Then go to the PC's support and driver page to install the drivers you need.
    Link to the W7 ISO file downloads is below.
    http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
    Paul

  • Windows 7 (Ent) Sp1 on server 2012 R2 HyperV, RFX USB redirection not working

    Hello, 
    I currently have  windows server 2012 R2 with HyperV installed. I have built two virtual machines. A windows 8.1 and Windows 7 sp1. Both are enterprise editions  
    For RemoteFX the hypervisor is using a Zotec GTX 760 GPU. It recognizes it and uses it to apply remoteFX adapter on my Windows 7 Sp1 VM. 
    As you are aware I do not need to use a GPU to enable RFX on my Windows 8.1 it can do this without the need of a GPU.    
    Using an RDP client( v8.1)  I can connect to my Windows 8.1 VM with a USB headset,memory Key or a printer and they all enumerate on the Virtual machine. The driver for each device installs 
    and I can use the device without any issues. 
    However this issue lies with the Windows 7 SP1 VM. I can connect to it via RDP( Same client)  but I cannot redirect any devices to it. I have installed the latest integration services available on the VM. I have ran all updates available.
    Because I have ran all updates the rdp version on the VM is running v8.1.
    Previous to installing the updates USBr still was not working
    I have enabled the following group polices under remote desktop services on the Windows 7 SP1 VM : 
    RDP 8.0 -- Enabled
    Configure RFX -- Enabled
    Is there a known issue with USB redirection not working on a Windows 7sp1 virtual machine hosted on server 2012 Hypervisor ??
    Many Thanks 
    Brian 

    Hi,
    According to the log above, I found that we run the script on both Server6 and Server7. Errors as below:
    Server6: Conversion is not supported in restricted language mode or a Data section.
    Server7: Couldn't figure out valid servers from the specified destination scope. Check your parameters and try again.
    Since we can only run the RollAlternateserviceAccountPassword.ps1 Script on CAS server, the script not works well if Server6 is MBX server.
    For Server7, based on the error message, it seems you still have no right to run the script/cmdlet.
    Please add your account to Organization Management Role group(ADUC->domain.com->Microsoft Exchange Security Groups) to test if possible.
    By the way, from Technet:
    You need to be assigned permissions before you can perform this procedure. To see what permissions you need, see the "Client Access Security" entry in the Client Access Permissions topic.
    Client Access Permissions
    http://technet.microsoft.com/en-us/library/dd638131.aspx
    Feel free to contact me if there is any problem.
    Thanks
    Mavis
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • G4050 on Windows XP x64: supported, yet not?

    Hi, When I follow the HP site for Drivers & Downloads to HP Scanjet G4050, the support page shows a drop down for OS. From the drop downs I select "Windows XP x64", which leads to a driver & software download. When I install with the downloaded file, the setup informs me that the Windows XP x64 OS is not supported. Why is it listed on the driver download page then. Anyway, I can install the 32-bit version on Windows XP x64, but most functionality works only half way or not at all. The software triggered with the on-scanner scan button can't save files. Scanning film slides doesn't work at all. Scanner is ok otherwise - works on Windows XP 32-bit. If anyone uses G4050 on Windows XP x64 and knows of some installation tricks, I'd be happy to hear about it. Thanks.

    Hello ,  I was looking into your inquiry about your software for your HP Scanjet G4050, and everything I found says it does support Windows XP. You mentioned you tried the download from Windows XP x64 - did you try the Microsoft Windows XP 64-Bit Edition?It has a basic driver listed there.  Under the  Windows XP x64, which file were you trying?HP Scanjet G4050 Photo Scanner Full Feature Software and DriverHP Scanjet Full Feature Software and DriverHP Full Feature Software/DriverDo any of the files work?  Please let me know if these steps resolved your issue, or if there is anything else I can do to help.  I look forward to hearing from you!   Thanks, 

  • Windows 7 on Satellite L875D-S7332- Usb Controller not Identified.

     Usb Controller not Identified in device drivers.Somehow I just cant get USB Controller Drivers for this laptop and Windows 7. I read all the posts on this site and none of them helped.Do you maybe know the exact drivers so l can add them to windows 32 bit directory and manually install them as all other methods failed. I attach a drivers screen print.

    Solved this in an unorthodox way. I had a Lenovo driver disk for a machine that also uses AMD and therefore likely the same chipset. I installed the usb drivers for the Lenovo from the Lenovo disk and it worked ! Attached is all the USB  controllers it now finds.I attach the new screenshot of devices So if anyone have a similar problem, try the Lenovo USB drivers. I find it peculiar that Toshiba doesnt have these USB drivers on their download page for my model Satellite L875D-S7332. Maybe they should add it. It took a good 5 hours to try and fix this using Toshiba's driver page. 

  • Dual-Boot; Restart and boot other o/s USB devices not working

    I have issue with my msi z97-g43 mobo and Windows dual o/s PC.
    Booting with win-8.1, USB devices working very well.Restaring windows 8.1 have NOT any issue.
    After shutdown & start PC, choosing to boot windows 7 on bootmanager, USB devices not working in Win-7.
    System no hang or occur any error/BSOD message.All startup programs run as normal.
    I tried to re-plug usb devices but notting happens...  Still not working
    But after the win-8.1 shutdown, if i switch off PSU power button, watting ~1 munute for discharge.
    After power up PC and boot with windows 7 all usb devices works normaly.
    I checked all internal connections. 2 times disassembly all hardware and re-built system, nothing changed.All windows updates and latest drivers installed.
    I'm sure other H/W is OK, but I thnik this mobo have a fault.

    Thank you for reply.My PC system specs:
    CPU:    Intel Pentium G3258 3.2ghz
    Board:    MSI Z97-G43 /Bios: Ver. V17.7
    MEM:    G.Skill Ripjaws 2x4gb DDR3-1600mhz cl9 1.5v F3-12800CL9-4GBRL
    VGA:    Sapphire AMD Redeon HD6670
    CASE:    Zalman z3 plus white (5x 120mm fan)
    PSU:    Thermaltake Litepower 500w (12v1+12v2=36amp)
    HDD-1:    Seagate 1TB ST1000DM003 /HDD-2: Seagate 2TB ST2000DM001
    COOLER:    Akasa 92mm PWM Blue Led
    OC:    CPU:Default /MEM: X.M.P mode=1600mhz 9-9-9-24-2t 1.5v
    O/S:    Win7 x64 PRO + Win8.1 x64 PRO (Genuine)
    All hdd's have MBR based partition table.Windows 7 & 8.1 installed in non-efi mode.In BIOS Boot sequence is setting up to non-efi Boot(system) drive as primary.
    Before I suspect maybe have a short circuit to pcb or similar thing cause this issue.I take out all parts outside the chassis, and ran this system on the antistatic bag and box.Nothing has been changed.
    I have Cooler Master Devastator(MB24 + MS2k) USB keyb+mouse set and tplink wn722n usb wireless dongle.
    I have one more pc,based on AMD 970+SB950 chipset mainboard and AMD CPU.I exchange all parts to this amd mainbaord and tested for faulted hardware.All intel system H/W's is ok.All works great
    Dual boot works perfectly.Not needs to switch off psu/power back and run system again.
    I think msi z97-g43 mainbıoard have a problem.

  • USB-Hub not working on LEFT USB port?

    Hello,
    I have installed Windows 7 Ultimate 64 Bit on my MacBook Pro 13" Retina (Early 2013) and it's running fine. Boot Camp version: 5.0.5033.
    But I have one problem: I bought an external monitor (Dell U2414H) which has an built-in 4-Port USB 3.0 hub. So I connect the Dell monitor using a DisplayPort 1.2a cable and an USB 3.0 cable. But Windows only recognizes the monitor's built-in USB hub when I plug the USB cable into the right USB port (when I sit in front of the MacBook). Then it works without problems. But when I plug the USB cable into the left USB port of the MacBook Windows only says "USB device not recognized". But other devices like USB sticks and USB drives also work without problems on left and right USB port of the MacBook. Also when I boot in OS 10.9 Mavericks the monitor's USB hub is working on both USB ports of the MacBook. So I think it isn't a hardware failure. I also re-installed Windows, but I have still the same problem.
    Do you have any idea, why only the monitor's built-in USB hub is not working in Windows on the left port of the MBP or even how I could fix it?
    Is Boot Camp 5.0.5033 the most current version? I checked the box to download the latest Windows support software and also didn't find anything newer than 5.0.5033 to download, but sometimes I read about 5.1.1 - but where could I download it? AND: Doest it help?
    Thanks in advance!

    I think I've hit a variation on the problem you're enoucntering.  I have a late-2013 13-inch Macbook Pro Retina.  I've just installed Boot Camp and a copy of Windows 7 Pro.  This is my first experience with Boot Camp and Windows on a Mac, so I'm in foreign teritory.
    The install all went fine and Windows 7 booted up fine and so far, all hardware seems to be working as expected, with one exception.  Things went sideways when I tried use it in "clamshell" mode - lid closed with external monitors and all my peripherals attached to a USB hub.  I set up Boot Camp to boot into Windows and attempted to boot.  It would give me the usual boot-up fanfair and a then a gray screen for a few seconds, and then it would reboot.  It just rebooted over and over.   I eventually discovered the issue was the USB hub - without the hub connected , it would boot just fine.  Once it was booted into Windows, I could attach the the hub and everything would be recognized normally.  Furthermore, I could put the system in sleep mode, wake it up and everything would be working fine.  But it simply refuses to boot the USB hub attached.  I've stumbled on a couple related threads - see https://discussions.apple.com/message/23802231#23802231.  The suggestion is that only certain hubs to not work.  I've got two different high quality powered hubs and both display the same behaviour.  The other point is, that when booting into OS X with the same hub, it works perfectly.  So it's a strange problem.
    Note that after reading your post, I did try the hub in both right and left USB ports and that made no difference in my case.  I do have one more hub to try (built into my Dell monitor).  I'll report back if that happens to work.

  • 4530s DC CARD or USB BOOT not working even if it has this option in bios

    i just posted a message but i think it's in the wrong section..
    http://h30434.www3.hp.com/t5/Other-Notebook-PC-questions/sd-card-boot-and-usb-boot-not-working/m-p/9...
    Hi, i just got a HP ProBook  4530s , I5 processor, Intel HD 3000 , i have a problem with it, i can't boot on any usb or sd card, i tried all linux versions i could find and also some live windows and bartPE, on my sd card i get the "Disk read error" as soon as i choose the booting device and on usb it goes a little bit further i can see the linux logo some processes starting and then same error related to write on disk, the sd card and usb are not in read only mode and on my other laptop a older one 6730s everything works...
    Also all the usb and sd card work perfect in windows, when i boot from internal HDD.
    Is there a fix for it??  Or can anybody that has this laptop test if it works booting from usb or sd card, maybe it's a problem with this unit..
    i have tried all available bios verions and various usb devices but as i said the usb sticks all worked on my other laptop but not on this one.
    Oh and also is there a bios option to stop virus check on boot? as far as i could test that is the only option in bios that is not there and i can't test with it ON/OFF.. any help would be apreciated because i can return the laptop for 30 days and i allready have it for one week. and i really need this option to work.
    PS - sorry for my bad english but i'm from Europe

    Quote from: Svet on 13-May-12, 00:13:31
    do >>Clear CMOS Guide<< with power cord removed
    Yes, I've tried this. I pulled the power cable, waited two minutes, hit the CMOS button, and also removed the battery, and waited another minute.
    After which, I loaded optimized defaults, but the problem remains.
    Thanks,
    Ice Piq

  • After Security updation of Windows 7 in Boot Camp (Mac Book Pro with Retina Display) on 13-Nov-2013, Windows 7 Desktop Gadgets are not working properly.

    After Security updation of Windows 7 in Boot Camp (Mac Book Pro with Retina Display) on 13-Nov-2013, Windows 7 Desktop Gadgets are not working properly.
    This is boot camp problem, because in other normal notebooks (e.g. SONY VAIO, Lenovo with Windows 7) the gadgets are working normally.
    I am attaching the screen shot of Desktop Gadgets and Security updates of Windows 7.
    Kindly solve this issue ASAP.
    Shailendra Gupta
    <edited by host>

    You are not addressing Apple, but a community of unpaid volunteers. So ASAP won't cut it. Also, you should refrain from posting personal information (like your email address) in the body of your comments, as this is part of the community usage guidelines.
    Have you reinstalled the latest Boot Camp Windows 7 drivers, just in case Microsoft overwrote some of them during the Windows 7 security update?
    If you want to communicate issues with Apple about Boot Camp and OS X, click on the link. Just don't hold your breath on receiving a response.

  • I have an Ipod Touch, it appears inactive and says conect to Itunes. When I connect it to the PC, the PC says "USB device not working". How can do to solve this problem.

    I have an Ipod Touch, it appears inactive and says "connect to Itunes". When I connect to the PC, the PC says "USB device not working". How could do to solve this problem?

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • Touchsmart TX-2 fingerprint scanner and USB ports not working

    Hi everyone,
    Please forgive me if this is in the wrong spot.
    Just sent my laptop (Touchsmart TX-2 1015au) off for a warranty fix - told them the USB ports weren't working on Windows 7, 64 bit. It came back wiped, running on Vista 32 bit and.....with the USB ports not working.
    I figured I'd try to get it working because I need my laptop for uni and can't send it back right now. So I clean installed Windows 7, 64 bit again and its still not working. Did the standard open device manager and uninstall everything under the usb tab. All that has resulted in is causing the fingerprint scanner to stop working (being told that it is not connected) and still no working USB ports.
    All advice really welcome and very much appreciated!
    Thanks in advance

    Hi:
    Should be no problem to get W7 32 bit to work on that model.
    Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
    Your model uses the Intel HD graphics driver only.
    The first driver you have to install is the Intel chipset installation utility and then reboot.
    http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
    Audio:  Accept the agreement.  Download and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
    If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

  • My usb port not work and hot usb port aria please help me

    my usb port not work and hot usb port aria please help me

    Hi
    Please find the link givenbelow might help you to fix your issue.
    USB Device Troubleshooting
    Fix Windows 7 “USB Device Not Recognized” Error
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Air Stream 1200 USB modem not work in yosemite

    my Air Stream 1200 USB modem not work in yosemite but it work in Windows pc.

    May be there is an update available. Contact Air Stream.

Maybe you are looking for