HP Pavilion a1102n sound device.

ok i had this computer for like 3 years now. but i crashed it like week ago. i ordered a recovery disk from HP. after i get the recovery disk i fixed my computer. but i cant hear any sound or talk to anyone from my computer. when i go check my sound device it says i dont have any sound devices(There are no actice mixer deviced avaliable).  pleace help me if you can. thanks
Thanks.

sorry this post supposed to be under Dekstop. not notebook.

Similar Messages

  • Pavilion a1253w sound device problem and other

    Have old Pavilion a1253w, XP ME. Device Mgr. shows two problem devices (yellow ?s w/ !s)...one multimedia audio controller, the other just below it just says "unknown device." They are both in a category named "other devices." I've tried downloading every possible available driver for this model, but nothing works. I could provide the entire system resource report, but maybe someone has a good notion of what is causing this problem. Have done all essential Windows updates. I had to re-install OS from non-HP disc and used the label OEM key to activate w/o problem...but pretty much all my original and HP software is gone except for the available drivers (not much). Any help appreciated.

    Hi:
    If you have a Pavilion a1253w, accept the agreement, download, unzip, and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.​aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownT​...

  • No sound Device detected on HP Pavilion m7650n

    What's Up Peeps!! Happy Holidays to everybody.
    Yesterday, when I logged on to one of my sons' computers - there was no sound coming out of the speackes on the HP w22 monitor. I checked to make sure it was plugged in and it was. According to one of my sons, the problem occurred a couple of weeks ago.
    I then went to HP trouble shooting and followed all of the instructions will no success. To make a long frustrating morning short. I typed msinfo032 and got  into property information. I checked on Components then Sound Device. The screen in totally blank.
    How do I reinstall the sound device and get the computer to recognize it?
    I do appeciate any help anyone can give me.
    Peace,
    Jimbobber805

    Ianethan wrote:
    OG,
    I downloaded the drive and restarted the computer. I checked on the control panel under sounds and audio devices and it still shows no audio device. Is there something else I need to do?
    Thanks for getting back to me so quickly.
    Peace,
    Jimbobber805
    Did you install the driver once it was downloaded?  I am not certain from your response.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • I have pavilion dv6 sound not working hp provide new update idt stil not working

    HI .
    i have pavilion dv6 sound  not working hp provide new update idt stil not working

    Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
    Go to Control Panel,Programs & Features-Uninstall IDT software and restart the laptop.Next install using the downloaded file.
    ```````````````````````````````````````
    If still no sound,try a hard reset, works sometimes.Disconnect all external devices first.
    1-remove power cord and battery
    2-press power button for 30 seconds
    3-reinstall only power cord for first startup.
    4-power on
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Audio/Sound Devices

    I have accidentally deleted my Audio/Sound devices on my Pavilion Dv4-1413TX. Now, I am not able to hear any sound from my com. It says that I have to install some kind of devices, and I'm not sure. Can anyone help me, please?

    Hi,
    The easiest way to solve this may be to run Windows System Restore.  If you have Norton Internet Security installed, you will need to disable Nortons Tamper Protection as shown in Step 2, on the link below.
    http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20091112171719EN&ln=en_US
    Once you've done this, shut down the PC.  Windows System Restore is usaully best run in Safe Mode.  Tap away at f8 as you start the PC to enter Windows Recovery Console.  Use the arrow keys to select Safe Mode and hit enter.  When this has loaded, from the Start Menu, click All Programs, click Accessories, click System Tools and launch System Restore.  Pick a restore point before the Audio Driver was deleted and then proceed with the restore process.  When complete, Windows will reboot as normal.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • No Sound device recognized

    I have a e9290f Pavilion. I just re-installed the system with HP recovery disks. I have no sound and the device manager does not see a sound device. It has onboard sound. I downloaded the new driver from the HP site and installed, re-booted and it still does not see the device. My thoughts is the onboard sound on the motherboard is "messed up". I bought this computer in 09 and it hasn't been used much. It is running Win 7. I went to the bios and changed the setting from Auto to Enabled and rebooted,  that didn't work. I went back to Auto and rebooted, that didn't work. I'm afraid I need a new motherboard or have to buy a sound card. Any thoughts would be welcome.

    Hi
    Thanks for your reply. I did several steps and made a determination it was the Realtek sound chip on the motherboard. As in my previous post I did a clean install, that should have put the original drivers to be loaded, didn't work. Then I downloaded the updated drivers, didn't work. Then I went to the Reaktek site and downloaded their drivers for the chipset on my motherboard, that didn't work. Then I did a google search and found that this motherboard has had several problems and indeed HP last year was replacing them. Because this computer at that time was being used by my son, I didn't know of the sound problems. He went to work in Florida about 6 months ago and the computer was sitting in the closet until about 1 month ago when I took it down considering to put Win 8 on it, and discovered the items I have been posting here. The solution was/is not to replace the motherboard ( I hope nothing else goes wrong with it because from what I read on the google search, sound going out is/was not the only problem ) but to install a sound card. So I went to Best Buy and bought a Creative sound card and installed it, drivers etc. and now everything is working fine. Thank you for trying to help. I checked out your link and that help page does absolutely nothing for you if you have no sound device showing up in device manager. That clearly means device manager is not seeing a sound device, all the drivers in the world and all the troubleshooting is not going to change that. Thank you for trying to help.

  • My sound device has been removed

    HP pavilion G series,  Windows xp.. failure to find sound device..  removed some programs that were not being used

    hi Pinball_Wizard,
    Welcome to the Forums.
    CD/DVD issues are commonly fixed by running the microsoft hotfix from this article:
    http://support.microsoft.com/kb/982116
    If the problem is not solved, the issue is most likely hardware related. Either the ODD is faulty or the connection from the ODD from the motherboard is failing. If you don't have an external USB ODD enclosure (like this one) to test the ODD, then you may need to bite the bullet and just replace the ODD directly.
    Best regards,
    neokenchi
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Pavilion dv6000 Audio Device disappeared

    Earlier today I was listening to music and everything was fine, but then all of a sudden my audio stopped playing.  I thought it was just muted so I clicked on my sound in the taskbar and it is telling me "No Audio Output Device is installed."  I have tried everything to my knowledge that I know would fix it but to no prevail.  Ive have searched the forum and on google for any explanation and possible fix but I have found nothing.  So, if anyone could help me with this problem it would be greatly apprieciated.

    I too am having this problem.  I own a HP Pavilion dv6809wm and after installing windows 7 my audio device is no longer detected as well as my DVD drive.  I have tried re-installing the drivers, locating, downloading, and installing the correct drivers for my sound device; which has caused the speakers to work until the user logged off or the computer was shut down, but this work around no longer works at all.  I have not been able to find a work around for the disk drive.  Since the warranty has expired HP is unwilling to provide assistance, so I am now working with Microsoft to try and fix these problems, they are helpful in assisting in helping me at this point, but have been told repeatedly that if it turns out to be something besides a faulty installation disk of windows 7 they will not be able to assist any further.  Any help at all would be great!
    Thanks in advance.

  • My sound device does not work after yesterdays update

    after the last update my sound device is out of system.

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.

  • Lost sound devices now blue screen of death when updating creative drivers.

    I have an XPS with windows 7, dont k now what the sound card is, I have factory installed software for Creative X something extreme, and Realtex.
    Now I had been trying to get sound via an optical cable to an AV amp with no success. I had tried disabling and re enabling sound devices, then I tried updating the drivers, realtex was ok but the Creative drivers caused the blue screen of death with the message IRQL Not less or equal"
    I tried all options in device manager including rollback, every time I try anything I get that blue screen of death, whats more, in "Sounds" in the control panel, I have lost two of my sound device options that do not appear even with "show hidden devices" so I now have no sound.

    Hi Nambo,
    Device manager should list the exact hardware in your desktop. But normally, integrated audio jacks will appear on the same backplane as other motherboard components, while an add-on card will have its jacks in an expansion slot. So you should know whether you have integrated or add-on.

  • Premiere Pro CS6 does not recognize USB PnP Sound device connected  to iMac OSX even when activated in Audio MIDI setup. The iMac(i-7 processor,16 GB)   is working with this USB device without any problem

    Premiere Pro CS6 does not recognize the USB PnP Sound device in order to produce a commentary sound track. The USB device has been activated on the iMac OSX by using the Audio-MIDI-setup and is working correctly with the iMac. When opening > presets >audio hardware I can only select between >standard >out  integrated > digital input integrated >microphone integrated. USB PnP is not indicated at this place.
    With the built-in microphone of the iMac I can produce the commentary sound track, but I would prefer a stand alone version for better quality.
    Your help is highly appreciated. Thanks in advance, Annemarie!

    I'm using a Logitech Webcam Pro 9000 (which has a microphone on the side). I have several other devices plugged into separate USB slots: a keyboard, a mouse, my iPhone, and a Roland keyboard midi controller.
    I've considered that maybe the webcam/mic combo is the culprit. If USB doesn't work at a constant speed, that could very well be causing the issue! The sound begins to lag badly sometimes when it's working properly, so that there's a multisecond delay between speaking and hearing my voice repeated back over the mic which is another sign that something is wrong. I've also caught it making a strange electronic sound during its "hang" time once it stops taking sound input correctly.
    Maybe I should try to use line-in and forgo USB altogether then. I think I'd need a preamp and some sort of converter for that since the Mac Mini lacks a powered mic jack. I'm only a newbie musician so I've never set up such a system but it might be a better solution in the long run.
    I'll check to see if it hangs before or after my computer enters suspend mode, that's a good suggestion too. Thank you for your help!

  • Issues with External Sound Devices & others - 13" Late 2011

    Good day community,
    Out of curiosity, I run Diablo 3 on OS X and its been unplayable since ROS expansion, massive fps drops and crashes, Blizzard claims Apple stopped improving hd3000 drivers on 10.8.3, is this true? Also when I run the game through windows via bootcamp it performs better and doesn't not crash, is this related to hd3000 driver support still being improved in windows?
    Other issues I'm experiencing, facetime most of the time fails if I try to pickup a call from the macbook, sometimes it notifies me of the incoming call (iphone 5s) sometimes it doesn't. Bluetooth doesn't work, not even with apple devices, I can't pair any of them. External sound devices such as m-audio fast track pro, native instruments audio 8 dj, allen & heath xone 4d, they all have latency issues and sound clips and pops, even with the onboard sound I experience this if I open a couple graphic editing software while playing itunes. Checked sample rate in audio/midi setup, drivers, firmware, everything seems up to date, I'm not using a USB hub, I updated to Yosemite from Mavericks, which was a terrible upgrade from Mountain Lion and it completely lagged the computer, so when I upgraded to Yosemite I ran disk utility from boot and apparently repaired the hard drive successfully. Performance is better but none of the above issues were solved.
    So I'm thinking about formatting from scratch but wanted to drop a line here and see if others have any of these issues and/or some tips.
    Thank you for your time.
    OS X 10.10.1
    hd3000 (512mb)
    8gb ram
    i5

    Hi Lyndon4321,
    I know that can be frustrating when using an external display, but take a look at the article below to continue troubleshooting. I would take a look at Reset the system and work you way down. 
    Apple computers: Troubleshooting issues with video on internal or external displays
    https://support.apple.com/en-us/HT201177
    Take it easy,
    -Norm G.  

  • Default Sound device with attached USB devices

    Hi,
    my situation: i've got an iMac 27" with an attached 24" cinema display (using display port and usb). Also i've plugged in a usb headset (headphone with microphone).
    Whenever booting up Mac OSX 10.6.4 (also happened to older version of Mac OSX, at least all 10.6.x versions) OSX sets the default audio device (input, output and system sounds) to the cinema displays audio device. No matter what i choose as the default sound device i have to reset it after every boot.
    Does anyone know how to come around this? I know i can easily set the device by alt clicking on the speaker symbol in the menu, i know there are tools out there like SoundSource that let me even more easily set the sound device but all i want to have is a default sound device that doesn't get overridden on every boot.
    Any help?

    All right, I seem to have solved it. The fact that it was only working using plughw: should have tipped me off, but at any rate, this is my working ~/.asoundrc:
    pcm.!default {
    type plug
    slave {
    pcm "hw:1,0"
    ctl.!default {
    type hw
    card 1

  • Wengo; Skype! No working sound device

    Hi!
    I tried to use wengo phone and skype on my PC but whenever I want to make a call or receive a call I can not hear anything and my mic also doesn't work. Does anyone know what the problem might be? Is it because of the old OSS? I thought wengo already uses alsa (I'm using the Beta version 2)? The sound device works fine when playing music and stuff.... it just won't work using the VoIP software!
    Any ideas?
    Thanks!

    Yes, I already installed skype-hijacker and it didn't work.
    It seems that I cannot record things in general. But I already checked my settings in KMix and the mic is activated for recording. I also can hear that it's activated when testing it. I don't know why it doesn't work from within the applications.
    I also cannot hear anybody in Skype or Wengophone but listening to music is not a big deal (I don't do this the same time, VoIP and listening to music so the apps don't have to share any ressource)....
    What else could it be?

  • OS X 10.6 Sound Device Labels

    I have one little annoying issue with sound devices on my Mac Mini. I have external amp and speakers hooked up to the audio out, and I have a Plantronics USB headset. When I go to select output devices, the audio out port is called "Headphones", while the USB Plantronics adapter is called "C-Media USB Audio Device"
    This confuses my wife and kids when selecting what sound device to use. Can the devices be re-labeled in OSX, so the "Headphones" output device is called "External Speakers" and the USB device Just called "Headset"?

    AFAIK the name of an audio device is hard-coded in the device itself, and so not alterable.

Maybe you are looking for