HP-PAVILION DM1-1090EV - Recovery - Error code:0XC0000034

need help please...
I used EASEUS Partition Master software to resize C: drive from 290GB to 50GB, then allocate the new partition 240GB to F: drive
when i try to boot from partition recovery by pressing f11 the following error message is shown

Hi,
Changing the partition sizes or deleting a partition fomr the original partition scheme causes the loss of the ability to access the recovery manager from the normal method. That ability can be resored by preformaing a factory image recovery. Be aware that a recovery is a destructive process and that makes it very different from Windows system restore. It is also an irreversible process.
You will have better results in your attempt to execute a recovery if you use a recovery disk set or usb recovery media.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

HP Notebook breakdown/ Ask for recovery / Error code 0xc0000034 HELP

Hello,
Last week my PC broke down after I turned it off manually. Since then, when I turn it on I fell directly on the 'Recovery' blue page. Saying
'Your PC need to be repaired. The Boot configuration data file is missing some required information...'
Then if I press Esc for UEFI Firmware settings, I can select 'Actualize my PC', but when I select that it tells that the windows lector is locked, so basically I cannot do anything.
Also I don' have any installation CDs because these 'new' PCs come with nothing.
In advance thanks, I think its manageable but I just dont know anything about PC and I really dont know what to do. Also I would like not to loose my data if possible.
S

Hi @nanotsong
Welcome to the HP Forums! I see that you are getting a Boot Configuration Data file is missing error message. Did you happen to create a set of recovery CDs when you first got your notebook? You will need either those or an installation disk to repair the file. Try seeing if you can borrow an installation CD if you didn't create the recovery CDs.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Error code: 0xc0000034

I tried to put on my laptop and it displayed this error message:
Your PC needs to be repaired.
The Boot Configuration Data file is missing some required information.
File: \BCD
Error code: 0xc0000034.
My laptop is a Pavilion G6.
please I need help urgently.
I recently upgraded from win 8 to win 8.1
thanks

Hi,
Try the solution provided in the below forum link
http://h30434.www3.hp.com/t5/Notebook-Recovery/the-windows-boot-configuration-data-file-does-not-con...
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

HELP!!!! Error code 0xc0000034 boot problem

Hi, my less than a year old Toshiba Satellite encountered the Boot BCD Error screen, I looked online for support and creted a recovery USB drive from a friends PC. I followed the directions I found that led me to the US > Trouble Shoot > Advanced Option screens I put in all the Bootrec/ xxx   suggested commands, got to the end and it told me the system is not recognizable, is there another way to get the PC to boot after this error mesg?
Can someone please help with this?
Thanks

Hello there... Hopefully this will help you get back up and running.
Ran into the same issue when I booted my PC this morning. Blue screen
Your PC needs to be repaired
The Boot Configuration Data File is missing some required information.
File: \BCD
Error code: 0xc0000034
blah blah... Alright so you mententioned you've created the USB stick and booted into it.
Click the trouble shoot icon -> advanced -> command prompt. Then enter the following commands one by one.
For my build C:/ is the windows harddrive. If your harddrive with windows on it isn't C:/ then change the letter to match your configuration. See at the bottom if you are unsure, I'll post some commands to help you work out which is your windows drive.
Bootrec /fixmbr
Bootrec /fixboot
Bootrec /scanos
Bootrec /rebuildbcd
After each line hit enter, you will see a success message. Then finally type in..
BCDboot c:\windows /s c: /l en-us
The slash after the C: and before windows has to be a backslash.
Reboot and you're done.
Run this fix on 4 coumputers so far, haven't determinted which part of the process fixes it but haven't run into any problems on doing the above.
Finding out your windows drive
In the command prompt type in
diskpart     hit enter and a new window will open. then in that window type
list volume      hit enter once again and your drives will be listen along with the drive letter
/Widowmaker.

HP 650 notebook BSOD error code : 0xc0000034

I have a HP650 notebook (Windows 8.1) and have for about 20 months. I ran a battery check and it said to calibrate it so i did so by going into the HP diagnostic test or something by pressing F2/escape on start-up. I ran it fine and it went for about 2 hours and upn completion it said it worked. It then restarted the laptop and i got a BSOD. It read "Your PC needs to be repaired. The boot configuration data file is missing some required information. File /BCD . Error code:0xc0000034. You'll need to use the recovery tools on your installation media." After looking online for a couple of hours someone told me to run an elevated command prompt and type in the following in order: "Bootrec /fixmbr, Bootrec /fixboot, Bootrec /scanos. Bootrec /rebuildbcd". After doing so it worked and i backed up everything on my laptop. My question is why did this happen. It must of had to been something to do with the battery configuration. Anyway, how can i stop this from happening in the future? Will it happen again or is it fixed as i typed those specific commands above and it worked or are the commands just a temporary fix or something? Also can i run the battery check again just to double check it worked or do you think i will get the BSOD error message again?
Thanks

Hello, @arsenal234123
To get your issue more exposure I would suggest posting it in the commercial forums since the HP 650 Notebook PC is a commercial product. You can do this at Notebook - HP ProBook, ZBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
The support page for your product may be helpful in the meantime:
HP 650 Notebook PC.
I hope this helps!
Thank you for posting on the HP Forums.
I worked on behalf of HP.

File missing (file\BCD error code 0Xc0000034 help need for work!

file missing (file\BCD error code 0Xc0000034 help need for work! what can i do?
have an p 2000 notebook pc

Hi bobkunkle, welcome to the HP Forums. I understand you cannot boot passed the error you are receiving.
What is the model or product number of your notebook? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Pavilion A6430f recovery error code

Hi,
I have a Pavilion a6430f desk top and I just replaced both hard drives on it. I inserted my recovery disk and began the recovery process when I received an error code of 0x400 100 130000 1002 as the hard drives were just beginning the reformatting of the Windows partition of the hard drive. I checked to make sure the hard drives were installed properly and it appears they are installed correctly. I have not been able to find any information online on how to solve this issue. Any suggestions for solving this problem would be greatly appreciated. Thanks in advance for your assistance.

I think you have a bad hard drive, it needs to be replaced.
Did you make the HP recovery discs when you got the PC?
If not you will need to order a set, then replace the hard drive and use the recovery set to install the Operating System.
You can order recovery media here if you do not have them
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have important data on the old hard drive I can show you how to save it once the new hard drive is installed and recovery has been performed, do not throw away the old hard drive

HP Recovery Error Code 100a

Hi
I Have the Pavilion dv5 Laptop and out of the blue it just stopped loading Windows instead it keeps stalling on the HP Recovery Screen and no matter how many times i try re-booting it just keeps halting on this screen. So I tried doing the System Recovery and as soon as i click next to begin a message box comes up saying "Error Code 100a if this keeps occuring contact HP". I've tried Googling this error code and have found different reasons for the error ranging from Hard Drive Failure to Motherboard Failure. I have run the diagnostics tool and the Hard Drive passed all tests as did the Memory. Has anybody else encountered this error or have any idea what it could be.
Thanks

Hello,
Please make sure that there are no USB drives or external devices attached. _if the problem continues and you cannot run the F11 recovery - Call HP @ 1800 HP Invent and they will send you a free set of recovery disks if you are still in warranty.
thanks!
I am an HP employee.
"Did my response help with your issue? If so, please give me Kudos by clicking the "Kudos" button or mark the post that solved your problem as the Accepted Solution. Thanks!"

HP Notebook 1000-1227TU Recovery - Error code: 0xc0000225

Hi there,
Model: HP 14" Notebook 1000-1227TU
OS: Windows 8
I ran into a serious issue with my newly bought HP Notebook. I used EASEUS Partition Master software to resize C: drive from 275GB to 70GB, then allocate the new partition 205GB to F: drive (D: is recovery, E: is DVD). After clicking apply, the system reboots (and downloading windows updates).
Upon reboot, the following error message is shown. I can not choose to boot from recovery etc.
===========================================
Recovery
Your PC needs to be repaired
A required device isn't connected or can't be accessed
Error code: 0xc0000225
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your administrator or PC manufacturer.
Press Enter to try again
Press F8 for Startup Settings
Press Esc for UEFI Firmware Settings
===========================================
This laptop is a gift to my parents and I am heading to my hometown in 2-days (in overseas). Pls help and provide assistance asap. Tks.
Rgs,
CK

Hi,
Press the power button and immediately tap the Esc key to enter the Strtup menu. In the Startup menu choose diagnostics and test the hard disk and the test the memory.
Post your results here in your thread.
If the results are a hard disk fail then the hard disk must be replaced with a new one.
Is your notebook still in warranty?
If the results are hard disk passed then the following procedure should help you.
You can download and create a live usb version of Gparted.
Boot to the USB flashdrive you used when creating the utility. Enter the Gparted partition editor and mark the recovery partition as active. Once that is done, restart the PC and it should boot right into the Recovery manager.
In the Recovery manager you can perform a Factory Image recovery to return your notebook to the state it was delivered to you.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Windows error code 0xc0000034

Recently, when I switch on my laptop, this error code appear 0xc0000034.
My question is, why Windows can fail? I keep my Windows updated, installed anti-virus, scan my laptop every week, de-fragment my hard disk every fortnight.
Some say my hard disk may have problem, but it is okay. Then I try to repair using Windows Repair Environment. It did the trick but I have no idea how it's fixed.
Any of you facing the same problem? I search the internet and there appears a lot of people facing this issue. If it is a common problem, why Microsoft fail to fix it?
Thank goodness my laptop is recoverable, if not, imagine the time I lost just to do a fresh installation to my laptop and copy all my backup.
Chiyawa

Solved - for the record - followed the directions in this link:
http://pcsupport.about.com/od/fixtheproblem/ht/rebuild-bcd-store-windows.htm

DV-7 Recovery - Error Code 105

Hello, I'm having an issue rebooting my dv7-1130us laptop (OS is Windows Vista) from the recovery discs and the hard drive is brand new since I thought that was the issue. It gets to 30%-50% and shows error code 1005 but the discs are in good condition. I have spent hours researching this and tried everything recommended in BIOS settings. Please let me know of the possible causes of this issue.
Thank you!
Jason

Which version and type(32 or 64-bit) of Vista is installed?
There are download links for the ISO image files in the following thread as well as an explanation of how to use it to reinstall the operating system.
http://h30434.www3.hp.com/t5/Notebook-Recovery/Windows-Vista-7-and-8-ISO-Image-file-Download-Links/t...
Installing the OS this way is the least expensive option. You can still download the drivers from the web support portal for your notebook on the drivers page.
Drivers for your notebook
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2100&lc=en&cc=us&dlc=en&sw_lang=&product=3795...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

HP Pavilion dv4 Notebook, LED Error Code blinks everlasting

Hi
When I turn on my Pavilion dv4 Notbook the screen is black, the powersupply LED stays on, the Wifi LED is orange, Speaker LED is orange too and the volume adjustment LED is white.
The LED's near capslock and numlock blink. There is this site with several different LED error codes from 1 to 6 blinks. But mine blinks forever without stopping once it has started.
What does this mean and how can I fix it?
Thanks, John

Hello again trishjax,
Thank you for the update on your issue is has helped. I agree with you based on what you just posted it definitely sounds like something has broken loose of the solder on your computer. The only thing I can suggest is you either contact HP Technical Support for repair options, or go to a local computer repair shop and have it looked at. If it is a hardware issue this is really your only option if you do not know how to do it yourself.
I know it was not the answer you were looking for, but I believe it will help you with your issue. I would like to thank you again for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

HP Pavilion dv6-7080se recovery error

when i run recovery a message apper to me and say :
windows faild to start a recent hardware or software change might be the cause to fix the problem :
1 - insert ur windows instllation disc and restart ur computer
2 - chosse ur language settings and then click next
3 - click repair ur computer
if you dont have this disk contact ur system adminstrator or computer manufacturer for assistance
file : \boot\bcd
status :0xc000000f
info : an error occurred while attempting to read the boot configuration data
to ur aknwolage
the drive ot the recovery i see the data in it
an the hidden drive hp tools i see it
and i but a recovery in a flash memory and i cant boot from it and i see it as files not a revovery disk
my operating system is windows 7 64 home prem my laptop HP Pavilion dv6-7080se
what i can do to make my recovery work

Hi durani,
You're best option would be to order a complete replacement set of Recovery Discs using the link below.
Order HP Recovery Discs.
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

"BCD file is missing some information Error code: 0xc0000034"

This laptop is a Dell Inspiron 15 (3521), it's operating system is Windows 8, it has no warranty, nor an installation media. I don't know how to repair it, or what caused this problem. I don't know if Dell would be able to help as it has no warranty. All I think I know about this problem is that Windows has to be installed again. And I'm not really good with computers.

Hi ,
Thank you for reaching out to us.
Before we proceed with repairing the Windows 8 operating system, Lets confirm there no hardware issues in the laptop.
Could you please run a thorough diagnostics on the laptop by pressing F12 key for 3-5 times on the Dell logo which comes up during the startup, Select the option "Diagnostics" from the list. Follow the on screen instruction.
Should it come up with any error messages, please let us know what is the Error message and Validation code.
However if everything comes up okay, please send me your computer’s service tag via private message.
To send a private message, click on my name and click start conversation.

Internet recovery error code "4403f"

i searched for solution for this issue and no one answer it. and i wish someone well..
so my problem is that i don't have an recovery HD so when i use the internet recovery it gives me ("apple.support" with code 4403F) and stuk ..
plz don't just read my probelm .. find me an answer plz .. thank you very much

tee144.. first that just isn't a nice answer..   Bashing someone for not knowing something is just wrong. and I was always told if your not part of the solution your part of the problem.
Second..   Alex's post was just about worthless as yours..   Because Googling some words and posting other responses.. ah dah don't mean anything especially when its incorrect
Lastly.. all the other posts on solutions for this PROBLEM - are just wrong and plain shots in the dark. because it is NOT a firewall or port blocking problem.. period.
I have perfect internet - no firewall.. Spent time on this issue (as I am working on it for a client) by trying several different internet provides at different locations that I own.. result was always the same
So I went further by checking the traffic with a packet capture.. Apple just is NOT answering back..    the only resolve can come from Apple because my traffic goes out to them and gets no replies..

HP-PAVILION DM1-1090EV - Recovery - Error code:0XC0000034

Similar Messages

Maybe you are looking for