HP Pavilion DV 6000 Mouse/Touchpad Not Working at All PLS HELP!

I have an HP Pavilion DV 6000. When it is powered on and I log in a screen pops up showing the mousepad with a red line going through it. The mouse does not move at all. Therefore I can not recover or do anything with the computer. Has anyone heard of this????
Also, the mousepad is not locked & I have tried rebooting the computer numerous times.

Kbrandt29 wrote:
I did try a USB mouse a while back. I know it didn't work but I'm not sure what happened.
How do you reinstall drivers? Sorry I'm not completely tech-savvy.
Thanks so much for your help.
First was it a corded usb mouse or a cordless?
If it was a corded it should've auto installed drivers from Windows itself to get it up and runnig.
If it was a cordless it should have again auto installed drivers for the dongle when inserted, But the mouse may have needed paired to the dongle, Which is done by usually clicking first on the discover/matching button on the bottom of the mouse itself, then pressing on the button on the dongle itself and that should match them together.
If it was a newer cordless mouse though most are already matched at the factory so there's no need for pairing much anymore.
As for installing the drivers it's fairly simple.
If you have a drivers and application DVD either that you bought from HP, or made yourself if you did a default factory image onto a DVD when you first got your computer, put that disk in your drive and navigate it till you find the driver, It should be marked Input Device Driver.
Or you can go to HP's Support Site and download the latest driver for your TouchPad and reinstall it from there.
You'll most likely have to reboot after doing this?
Let me know if this helps.
If not I've a couple other ideas, I just don't want to overwhelm you at this point.

Similar Messages

My ipod touch is not working at all pls HELP, my ipod touch is not working at all pls HELP

My iPod touch is not working at all,i did everything i could and still it doesnt work,i live in the philippines my idea of solving this problem is to send it back at Apple California we do have service centre here but i dont trust them,i dont know what to do,I REALLY NEED YOUR HELP

Quite possibly. It wouldn't hurt to try another one if at all possible. If you have to, borrow one from a friend. It could also be due to debris in the docking port of your iPod. Take a look on the inside of the port and make sure there is no lint or anything like that. Also look for broken pins as they would definitely cause connection issues as well.
B-rock

TS3048 my wireless mouse is not working at all. I have changed the batteries and still nothing, not even a flashing green light. I am using someone else's computer to ask these questions as I now can't use mine. Help!!!

my wireless mouse is not working at all. I have changed the batteries and still nothing, not even a flashing green light. I am using someone else's computer to ask these questions as I now can't use mine. Help!!!

I just had the same problem. And I found the solution, on Youtube.
The problem is that these ******** at apple designed the battery compartement, the distance between metal contacts too big.
That means the batteries plus or minus poles are not touching the corresponding contacts in the mouses battery compartement.
Most likely the battery doesn't get pushed up to touch the plus contacts.
I used a fingernail to push the battery up and tadaa, the green LED came on.
The guy in the Youtube video just put some folded aluminium foil under the minus poles for bridging the gap.
See here, "How to fix the Apple Magic Mouse!":
https://www.youtube.com/watch?v=7vlDEVfV45s
Hope this helps.
<Edited by Host>

Just now i replace the 5s mother board but could not work touch id pls help me.....

just now i replace the 5s mother board but could not work touch id pls help me.....

if you have replaced the logic board on your phone, by yourself then that is considered modification and can cause other parts to fail due to ESD issues or just damage from handling parts

HT3180 I just updated my Apple TV 2 and now it is flashing and not working at all. Help

I just updated my Apple TV 2 and now it is flashing and not working at all. Help

I just did the update to version 5.2 on our ATV2 and now I'm having the exact same problem as the OP- all attempts to access any iTunes services i.e. Movies or TV result in dropping back to the ATV Main menu. Per Winston's suggestion, I logged out of iTunes and then tried to log back in. I am getting a message "the server is not responding- please try again later".
FWIW- all my non-iTunes services on the ATV are working fine- i.e. Netflix and YouTube.
Sounds like the update has overwhelmed the Apple servers.
Dave

IPOD MINI NOT WORKING AT ALL! HELP!!

my ipod mini is not working at all.
It won't turn on and it won't recharge.
When i plug it in it says it does not recognize the USB.. does this mean i need a new USB cord? I don't want to waste my money on buying a new one if i don't need it.

Try these.
iPod won't turn on.
iPod battery doesn't charge.
Your Windows PC doesn't recognize the iPod is connected.

S430 - touchpad not working at all out of the box

Hi all
I know there's a few people who have problems with the touchpad on their thinkpads, I've got another, different problem!
I got mine out of the box yesterday and neither the touchpad nor the red joystick controller in the keyboard work. The buttons on the touchpad also don't work.
Luckily I had a USB mouse at home and I've been able to the laptop up and running, but no luck trying to get the touchpad working. I've gone through the user guide, the help guide, the lenovo website etc, but not finding anything.
When I go into the "control panel", then "hardware and sound" and select "device manager", the only "mice and other pointing devices" that I have is my HID-compliant mouse which seems to be the USB mouse. The touchpad doesn't feature at all.
If I go into "control panel" and select "mouse" I don't actually have a tab for "UltraNav". Since all the help out there tells me to go to that tab, I don't really know what to do!
If I go through the Lenovo Solution Center, it tells me that the "ThinkPad UltraNav Pointing Device" is disabled and to fix it I need to go to the Device Manager.
But, as already said, in the device manager there's nothing I can do!
Any help would be much appreciated.
cheers
Harry

Hi
This notebook seems to belong to the PSAF5E series.
I wonder where you have found the drivers for this series ?:|
However, I have checked the Toshiba European page and didnt find the Vista touchpad driver especially for this series.
BUT the page provides some touchpad drivers (two drivers) for the Equium A200 PSAEE.
I would recommend installing the Alps Electric Touch Pad driver v7.0.301.4 and the Synaptics Touch Pad driver v. 9.1.14.0.
By the way; its always recommended to reinstall the OS with the Toshiba recovery CD. If you dont have such CD you could order it from the ASP which is responsible for you country.

Mouse pad not working at all.

Hi,
I am using HP envy 17 notbook PC. It is a 2 month old. From today morning the mouse pad is not at working all of a sudden. I had to use usb mouse to operate. I tried all ways of installing drivers and all other stuff but its not working. Please suggest something, its urgent.
Thank you in advance.
This question was solved.
View Solution.

Hi
Go to Device manager and uninstall the driver first then restart the unit.
Check if the Touchpad is turned on.
Go to HP website and update the Touchpad driver and Bios and see if this fixes your issue.
Last option once unit is powered on keep tapping the F11 option and see if the Touchpad works here if in case Mouse not working you may have to call HP Technical Support and get the unit serviced.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Itunes will not work at all :(. HELP

I have done everything i can possibly think of, i have uninstalled, reinstalled.. Uninstalled anything associate with apple and reinstalled and nothing works at all. Everytime i try to open Itunes or Quicktime it says Itunes has encountered a problem and needs to be closed.. How do i get my freaking itunes to work.

Thanks, Gray!
I'm afraid the worry with that particular combination is malware. (Often people who get it also can't get their Adobe Reader to launch either, although that symptom isn't universal.)
I'm not sure which particular beast (or beasts) is the culprit at this stage, but the free version of Malwarebytes has been doing a good job of fixing it for a lot of people.
Download and install malwarebytes from the following page. Update the Malwarebytes definitions prior to running a scan with Malwarebytes:
http://www.malwarebytes.org/
If the Malwarebytes scans pick up infections could you let us know what they are called, please?
If you remove the infections, can you get your iTunes and QuickTime launching again?

Itunes not working at all please help

ok so when ever i open my itunes it says it has to redownload, after it goes through that it says that to make the operation work i have either restart my computer or restart it later. i have done both and its not working, i dont know whats hte matter with it, oh and if it has anythin to do with it i have Vista

Hi jayna_lagomarsino,
If you are having issues with your Apple ID security questions, you may find the following articles helpful:
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
Apple Support: Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Regards,
- Brenden

Email Not Working At All Please Help!

hey, i just got my black berry today and the email is not working. I go to the email set up page and it brings me to the terms of service but when i click next it says that this black berry already has an account? i do not know what to do. I also have not created account. It hasn't let me and i have clicked the Options/Router register thing has not worked. I really need help with this

Venny19 wrote:
hey, i just got my black berry today and the email is not working. I go to the email set up page and it brings me to the terms of service but when i click next it says that this black berry already has an account? i do not know what to do. I also have not created account. It hasn't let me and i have clicked the Options/Router register thing has not worked. I really need help with this
If you go to the setup wizard>Email Setup you should have two choices
1. Create/Add
2. Use work email account
If you are wanting the first option it shouldn't deny you access as you can have multiple accounts.
The ony reason I can think of would be if you bought the device used and it is max'd out.
What are the details on your Blackberry? If purchased new did you activate it at time of purchase? What steps have you taken to establish service with your provider.
Наглый пес! Вы должны быть благодарны мы даем Вам возможность проживать в нашем мире!
BB 9550 Verizon OS 5.0.0.1015 My Storm My Blackberry My Lifeline
If there is a Theme on my Blackberry, Hedone it!
If someone successfully helped you with an issue, say thank you by clicking "kudos" in their post and clicking the star.
Antiquis temporibus, nati tibi similes in rupibus ventosissimis exponebantur ad necem
If your issue has been solved, please mark the post that solved it for you!

Z10 not working at all please help in solving this problem

Z10 has been stuck in "Preparing Blackberry HUB" mode for hours despite several restarts and battery pulls. Five swipe solution to restarting HUB only results in screen flashing on and off. Frustrated. Any ideas appreciated. Phone calls too not working, cant receive email, text messages or launch applications although preview screen seems to be working.
Have reviewed other threads for solution with no success. Would rather not use security wipe option.
Please help in sloving this problem

I would start with a Security Wipe:
To perform a Security Wipe please follow the instructions below. Be sure and use BB Link to make a full backup before proceeding with the wipe:
http://www.blackberry.com/btsc/KB33591
Once the wipe is complete you can restore your backup. Keep in mind that data in the backup may be the source of the original problem and restoring it may restore the problem, as well. To alleviate this I recommend not restoring the Settings portion of the backup.
If that doesn't work then use an autoloader to reload the OS:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Kept crashing so uploaded v,7 now it not working at all !help

firefox kept crashing and freezing so uploaded version 7. restarted computer and now although icon is on there when i clik on it it just opens up email program. also gave me a list of incompatible add ons like java etc. can i go back yo version 5 was slow but dependable. also would not work with facebook games.

1. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
2. Close all windows and quit all applications.
    Click the spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
    Select Disk Utility from the drop down. When the Disk utility window opens up,
    select Macintosh HD, then First Aid.
    Click Repair Disk Permissions button.
    Ignore the time remaining estimate.
    Last 1 minute may take longer.

[Solved]Synaptics Touchpad not working at all on Fujitsu Siemens UH552

Hi,
I have just installed Arch on my Fujitsu Siemens UH552 laptop. Everything works except for the touchpad which seems to get loaded by Xorg, but when in X it doesn't work. I have tried both using /dev/input/event* and /dev/input/mouse0 as device paths, neither works.
xf86-input-evdev and xf86-input-synaptics are installed.
I have tried running both with the default 10-evdev.conf, with 10-synaptics.conf, with both, and without both.
TLDR SOLUTION: https://bbs.archlinux.org/viewtopic.php … 3#p1189603
My current 10-synaptics.conf:
Section "InputClass"
Identifier "Touchpad Catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "synaptics"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection
Xorg.0.log
[ 2275.127]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 2275.130] X Protocol Version 11, Revision 0
[ 2275.131] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 2275.132] Current Operating System: Linux corvo 3.5.3-1-ARCH #1 SMP PREEMPT Sun Aug 26 09:14:51 CEST 2012 x86_64
[ 2275.132] Kernel command line: root=/dev/sda2 rootflags=subvol=__active ro initrd=/boot/initramfs-linux.img BOOT_IMAGE=/boot/vmlinuz-linux
[ 2275.134] Build Date: 27 August 2012 08:04:39AM
[ 2275.135]
[ 2275.136] Current version of pixman: 0.26.2
[ 2275.138] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2275.138] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2275.142] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 1 13:16:01 2012
[ 2275.143] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2275.144] (==) No Layout section. Using the first Screen section.
[ 2275.144] (==) No screen section available. Using defaults.
[ 2275.144] (**) |-->Screen "Default Screen Section" (0)
[ 2275.144] (**) | |-->Monitor "<default monitor>"
[ 2275.144] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 2275.144] (**) | |-->Device "Intel Graphics"
[ 2275.144] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2275.144] (==) Automatically adding devices
[ 2275.144] (==) Automatically enabling devices
[ 2275.144] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2275.144] Entry deleted from font path.
[ 2275.144] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2275.144] Entry deleted from font path.
[ 2275.144] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2275.144] Entry deleted from font path.
[ 2275.144] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2275.144] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2275.144] Entry deleted from font path.
[ 2275.144] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2275.144] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 2275.144] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2275.144] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2275.144] (II) Loader magic: 0x7c8b00
[ 2275.144] (II) Module ABI versions:
[ 2275.144] X.Org ANSI C Emulation: 0.4
[ 2275.144] X.Org Video Driver: 12.1
[ 2275.144] X.Org XInput driver : 16.0
[ 2275.144] X.Org Server Extension : 6.0
[ 2275.144] (--) PCI:*(0:0:2:0) 8086:0166:10cf:16c2 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00002000/64
[ 2275.144] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2275.144] (II) LoadModule: "extmod"
[ 2275.144] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2275.145] (II) Module extmod: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.0.0
[ 2275.145] Module class: X.Org Server Extension
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension MIT-SCREEN-SAVER
[ 2275.145] (II) Loading extension XFree86-VidModeExtension
[ 2275.145] (II) Loading extension XFree86-DGA
[ 2275.145] (II) Loading extension DPMS
[ 2275.145] (II) Loading extension XVideo
[ 2275.145] (II) Loading extension XVideo-MotionCompensation
[ 2275.145] (II) Loading extension X-Resource
[ 2275.145] (II) LoadModule: "dbe"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2275.145] (II) Module dbe: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.0.0
[ 2275.145] Module class: X.Org Server Extension
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension DOUBLE-BUFFER
[ 2275.145] (II) LoadModule: "glx"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2275.145] (II) Module glx: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.0.0
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (==) AIGLX enabled
[ 2275.145] (II) Loading extension GLX
[ 2275.145] (II) LoadModule: "record"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2275.145] (II) Module record: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.13.0
[ 2275.145] Module class: X.Org Server Extension
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension RECORD
[ 2275.145] (II) LoadModule: "dri"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2275.145] (II) Module dri: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.0.0
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension XFree86-DRI
[ 2275.145] (II) LoadModule: "dri2"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2275.145] (II) Module dri2: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.2.0
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension DRI2
[ 2275.145] (II) LoadModule: "intel"
[ 2275.146] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 2275.146] (II) Module intel: vendor="X.Org Foundation"
[ 2275.146] compiled for 1.12.3.901, module version = 2.20.5
[ 2275.146] Module class: X.Org Video Driver
[ 2275.146] ABI class: X.Org Video Driver, version 12.1
[ 2275.146] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+)
[ 2275.146] (--) using VT number 7
[ 2275.149] drmOpenDevice: node name is /dev/dri/card0
[ 2275.149] drmOpenDevice: open result is 7, (OK)
[ 2275.150] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 2275.150] drmOpenDevice: node name is /dev/dri/card0
[ 2275.150] drmOpenDevice: open result is 7, (OK)
[ 2275.150] drmOpenByBusid: drmOpenMinor returns 7
[ 2275.150] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 2275.150] drmOpenDevice: node name is /dev/dri/card0
[ 2275.150] drmOpenDevice: open result is 8, (OK)
[ 2275.150] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 2275.150] drmOpenDevice: node name is /dev/dri/card0
[ 2275.150] drmOpenDevice: open result is 8, (OK)
[ 2275.150] drmOpenByBusid: drmOpenMinor returns 8
[ 2275.150] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 2275.150] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2275.150] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 2275.150] (==) intel(0): RGB weight 888
[ 2275.150] (==) intel(0): Default visual is TrueColor
[ 2275.150] (**) intel(0): Option "AccelMethod" "sna"
[ 2275.150] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 2275.151] (**) intel(0): Framebuffer tiled
[ 2275.151] (**) intel(0): Pixmaps tiled
[ 2275.151] (**) intel(0): 3D buffers tiled
[ 2275.151] (**) intel(0): Throttling enabled
[ 2275.151] (**) intel(0): Delayed flush enabled
[ 2275.151] (**) intel(0): "Tear free" disabled
[ 2275.151] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 2275.151] (II) intel(0): Output LVDS1 has no monitor section
[ 2275.152] (II) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 2275.152] (II) intel(0): Output VGA1 has no monitor section
[ 2275.153] (II) intel(0): Output HDMI1 has no monitor section
[ 2275.193] (II) intel(0): Output DP1 has no monitor section
[ 2275.193] (II) intel(0): EDID for output LVDS1
[ 2275.193] (II) intel(0): Manufacturer: LGD Model: 371 Serial#: 0
[ 2275.193] (II) intel(0): Year: 2012 Week: 0
[ 2275.193] (II) intel(0): EDID Version: 1.3
[ 2275.193] (II) intel(0): Digital Display Input
[ 2275.193] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 2275.193] (II) intel(0): Gamma: 2.20
[ 2275.193] (II) intel(0): No DPMS capabilities specified
[ 2275.193] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2275.193] (II) intel(0): First detailed timing is preferred mode
[ 2275.193] (II) intel(0): redX: 0.589 redY: 0.347 greenX: 0.343 greenY: 0.555
[ 2275.193] (II) intel(0): blueX: 0.160 blueY: 0.124 whiteX: 0.313 whiteY: 0.329
[ 2275.193] (II) intel(0): Manufacturer's mask: 0
[ 2275.193] (II) intel(0): Supported detailed timing:
[ 2275.193] (II) intel(0): clock: 70.0 MHz Image Size: 293 x 165 mm
[ 2275.193] (II) intel(0): h_active: 1366 h_sync: 1402 h_sync_end 1438 h_blank_end 1476 h_border: 0
[ 2275.193] (II) intel(0): v_active: 768 v_sync: 772 v_sync_end 780 v_blanking: 790 v_border: 0
[ 2275.193] (II) intel(0): LG Display
[ 2275.193] (II) intel(0): LP133WH2-TLF1
[ 2275.193] (II) intel(0): EDID (in hex):
[ 2275.193] (II) intel(0): 00ffffffffffff0030e4710300000000
[ 2275.193] (II) intel(0): 00160103801d10780afc359658578e29
[ 2275.193] (II) intel(0): 1f505400000001010101010101010101
[ 2275.193] (II) intel(0): 010101010101581b566e500016302424
[ 2275.194] (II) intel(0): 480025a5100000190000000000000000
[ 2275.194] (II) intel(0): 00000000000000000000000000fe004c
[ 2275.194] (II) intel(0): 4720446973706c61790a2020000000fe
[ 2275.194] (II) intel(0): 004c503133335748322d544c463100ce
[ 2275.194] (II) intel(0): EDID vendor "LGD", prod id 881
[ 2275.194] (II) intel(0): Printing DDC gathered Modelines:
[ 2275.194] (II) intel(0): Modeline "1366x768"x0.0 70.00 1366 1402 1438 1476 768 772 780 790 -hsync -vsync (47.4 kHz eP)
[ 2275.194] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Printing probed modes for output LVDS1
[ 2275.194] (II) intel(0): Modeline "1366x768"x60.0 70.00 1366 1402 1438 1476 768 772 780 790 -hsync -vsync (47.4 kHz eP)
[ 2275.194] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 2275.194] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 2275.194] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 2275.194] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 2275.194] (II) intel(0): EDID for output VGA1
[ 2275.195] (II) intel(0): EDID for output HDMI1
[ 2275.236] (II) intel(0): EDID for output DP1
[ 2275.236] (II) intel(0): Output LVDS1 connected
[ 2275.236] (II) intel(0): Output VGA1 disconnected
[ 2275.236] (II) intel(0): Output HDMI1 disconnected
[ 2275.236] (II) intel(0): Output DP1 disconnected
[ 2275.236] (II) intel(0): Using exact sizes for initial modes
[ 2275.236] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 2275.236] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2275.236] (**) intel(0): Display dimensions: (290, 160) mm
[ 2275.236] (**) intel(0): DPI set to (119, 121)
[ 2275.236] (II) Loading sub module "dri2"
[ 2275.236] (II) LoadModule: "dri2"
[ 2275.237] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2275.237] (II) Module dri2: vendor="X.Org Foundation"
[ 2275.237] compiled for 1.12.4, module version = 1.2.0
[ 2275.237] ABI class: X.Org Server Extension, version 6.0
[ 2275.237] (==) Depth 24 pixmap format is 32 bpp
[ 2275.237] (II) intel(0): SNA initialized with IvyBridge backend
[ 2275.237] (==) intel(0): Backing store disabled
[ 2275.237] (==) intel(0): Silken mouse enabled
[ 2275.237] (II) intel(0): HW Cursor enabled
[ 2275.237] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2275.238] (==) intel(0): DPMS enabled
[ 2275.239] (II) intel(0): [DRI2] Setup complete
[ 2275.239] (II) intel(0): [DRI2] DRI driver: i965
[ 2275.239] (II) intel(0): direct rendering: DRI2 Enabled
[ 2275.239] (==) intel(0): hotplug detection: "enabled"
[ 2275.239] (--) RandR disabled
[ 2275.239] (II) Initializing built-in extension Generic Event Extension
[ 2275.239] (II) Initializing built-in extension SHAPE
[ 2275.239] (II) Initializing built-in extension MIT-SHM
[ 2275.239] (II) Initializing built-in extension XInputExtension
[ 2275.239] (II) Initializing built-in extension XTEST
[ 2275.239] (II) Initializing built-in extension BIG-REQUESTS
[ 2275.239] (II) Initializing built-in extension SYNC
[ 2275.239] (II) Initializing built-in extension XKEYBOARD
[ 2275.239] (II) Initializing built-in extension XC-MISC
[ 2275.239] (II) Initializing built-in extension SECURITY
[ 2275.239] (II) Initializing built-in extension XINERAMA
[ 2275.239] (II) Initializing built-in extension XFIXES
[ 2275.239] (II) Initializing built-in extension RENDER
[ 2275.239] (II) Initializing built-in extension RANDR
[ 2275.239] (II) Initializing built-in extension COMPOSITE
[ 2275.239] (II) Initializing built-in extension DAMAGE
[ 2275.250] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 2275.250] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 2275.250] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 2275.250] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 2275.250] (II) AIGLX: Loaded and initialized i965
[ 2275.250] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 2275.251] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
[ 2275.276] (II) intel(0): Setting screen physical size to 361 x 203
[ 2275.319] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 2275.319] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2275.319] (II) LoadModule: "evdev"
[ 2275.319] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2275.320] (II) Module evdev: vendor="X.Org Foundation"
[ 2275.320] compiled for 1.12.3.901, module version = 2.7.3
[ 2275.320] Module class: X.Org XInput Driver
[ 2275.320] ABI class: X.Org XInput driver, version 16.0
[ 2275.320] (II) Using input driver 'evdev' for 'Power Button'
[ 2275.320] (**) Power Button: always reports core events
[ 2275.320] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 2275.320] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2275.320] (--) evdev: Power Button: Found keys
[ 2275.320] (II) evdev: Power Button: Configuring as keyboard
[ 2275.320] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 2275.320] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2275.320] (**) Option "xkb_rules" "evdev"
[ 2275.320] (**) Option "xkb_model" "evdev"
[ 2275.320] (**) Option "xkb_layout" "se"
[ 2275.355] (II) config/udev: Adding input device Fujitsu FUJ02E3 (/dev/input/event3)
[ 2275.356] (**) Fujitsu FUJ02E3: Applying InputClass "evdev keyboard catchall"
[ 2275.356] (II) Using input driver 'evdev' for 'Fujitsu FUJ02E3'
[ 2275.356] (**) Fujitsu FUJ02E3: always reports core events
[ 2275.356] (**) evdev: Fujitsu FUJ02E3: Device: "/dev/input/event3"
[ 2275.356] (--) evdev: Fujitsu FUJ02E3: Vendor 0 Product 0x6
[ 2275.356] (--) evdev: Fujitsu FUJ02E3: Found keys
[ 2275.356] (II) evdev: Fujitsu FUJ02E3: Configuring as keyboard
[ 2275.356] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input3/event3"
[ 2275.356] (II) XINPUT: Adding extended input device "Fujitsu FUJ02E3" (type: KEYBOARD, id 7)
[ 2275.356] (**) Option "xkb_rules" "evdev"
[ 2275.356] (**) Option "xkb_model" "evdev"
[ 2275.356] (**) Option "xkb_layout" "se"
[ 2275.357] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 2275.357] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2275.357] (II) Using input driver 'evdev' for 'Video Bus'
[ 2275.357] (**) Video Bus: always reports core events
[ 2275.357] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 2275.357] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 2275.357] (--) evdev: Video Bus: Found keys
[ 2275.357] (II) evdev: Video Bus: Configuring as keyboard
[ 2275.357] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9/event9"
[ 2275.357] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 2275.358] (**) Option "xkb_rules" "evdev"
[ 2275.358] (**) Option "xkb_model" "evdev"
[ 2275.358] (**) Option "xkb_layout" "se"
[ 2275.359] (II) config/udev: Adding input device Fujitsu FUJ02B1 (/dev/input/event2)
[ 2275.359] (**) Fujitsu FUJ02B1: Applying InputClass "evdev keyboard catchall"
[ 2275.359] (II) Using input driver 'evdev' for 'Fujitsu FUJ02B1'
[ 2275.359] (**) Fujitsu FUJ02B1: always reports core events
[ 2275.359] (**) evdev: Fujitsu FUJ02B1: Device: "/dev/input/event2"
[ 2275.359] (--) evdev: Fujitsu FUJ02B1: Vendor 0 Product 0x6
[ 2275.359] (--) evdev: Fujitsu FUJ02B1: Found keys
[ 2275.359] (II) evdev: Fujitsu FUJ02B1: Configuring as keyboard
[ 2275.359] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/FUJ02B1:00/input/input2/event2"
[ 2275.359] (II) XINPUT: Adding extended input device "Fujitsu FUJ02B1" (type: KEYBOARD, id 9)
[ 2275.359] (**) Option "xkb_rules" "evdev"
[ 2275.359] (**) Option "xkb_model" "evdev"
[ 2275.359] (**) Option "xkb_layout" "se"
[ 2275.360] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 2275.360] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2275.360] (II) Using input driver 'evdev' for 'Power Button'
[ 2275.360] (**) Power Button: always reports core events
[ 2275.360] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 2275.360] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2275.360] (--) evdev: Power Button: Found keys
[ 2275.360] (II) evdev: Power Button: Configuring as keyboard
[ 2275.361] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5"
[ 2275.361] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
[ 2275.361] (**) Option "xkb_rules" "evdev"
[ 2275.361] (**) Option "xkb_model" "evdev"
[ 2275.361] (**) Option "xkb_layout" "se"
[ 2275.362] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 2275.362] (II) No input driver specified, ignoring this device.
[ 2275.362] (II) This device may have been added with another device file.
[ 2275.362] (II) config/udev: Adding input device FJ Camera (/dev/input/event7)
[ 2275.362] (**) FJ Camera: Applying InputClass "evdev keyboard catchall"
[ 2275.362] (II) Using input driver 'evdev' for 'FJ Camera'
[ 2275.362] (**) FJ Camera: always reports core events
[ 2275.362] (**) evdev: FJ Camera: Device: "/dev/input/event7"
[ 2275.363] (--) evdev: FJ Camera: Vendor 0x10f1 Product 0x1a44
[ 2275.363] (--) evdev: FJ Camera: Found keys
[ 2275.363] (II) evdev: FJ Camera: Configuring as keyboard
[ 2275.363] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input7/event7"
[ 2275.363] (II) XINPUT: Adding extended input device "FJ Camera" (type: KEYBOARD, id 11)
[ 2275.363] (**) Option "xkb_rules" "evdev"
[ 2275.363] (**) Option "xkb_model" "evdev"
[ 2275.363] (**) Option "xkb_layout" "se"
[ 2275.364] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 2275.364] (II) No input driver specified, ignoring this device.
[ 2275.364] (II) This device may have been added with another device file.
[ 2275.364] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[ 2275.364] (II) No input driver specified, ignoring this device.
[ 2275.364] (II) This device may have been added with another device file.
[ 2275.365] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 2275.365] (II) No input driver specified, ignoring this device.
[ 2275.365] (II) This device may have been added with another device file.
[ 2275.365] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2275.365] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2275.365] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2275.366] (**) AT Translated Set 2 keyboard: always reports core events
[ 2275.366] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2275.366] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2275.366] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2275.366] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2275.366] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2275.366] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 2275.366] (**) Option "xkb_rules" "evdev"
[ 2275.366] (**) Option "xkb_model" "evdev"
[ 2275.366] (**) Option "xkb_layout" "se"
[ 2275.366] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 2275.366] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Touchpad Catchall"
[ 2275.366] (II) LoadModule: "synaptics"
[ 2275.366] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 2275.367] (II) Module synaptics: vendor="X.Org Foundation"
[ 2275.367] compiled for 1.12.2, module version = 1.6.2
[ 2275.367] Module class: X.Org XInput Driver
[ 2275.367] ABI class: X.Org XInput driver, version 16.0
[ 2275.367] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 2275.367] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2275.367] (**) Option "Device" "/dev/input/event8"
[ 2275.367] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 2275.367] (**) Option "TapButton1" "1"
[ 2275.367] (**) Option "TapButton2" "2"
[ 2275.367] (**) Option "TapButton3" "3"
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2275.367] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2275.367] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
[ 2275.368] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 2275.368] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 2275.368] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 2275.368] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 2275.368] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2275.368] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 2275.368] (II) No input driver specified, ignoring this device.
[ 2275.368] (II) This device may have been added with another device file.
[ 2275.368] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 2275.368] (II) No input driver specified, ignoring this device.
[ 2275.368] (II) This device may have been added with another device file.
xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=13 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Fujitsu FUJ02E3 id=7 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Fujitsu FUJ02B1 id=9 [slave keyboard (3)]
↳ Power Button id=10 [slave keyboard (3)]
↳ FJ Camera id=11 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
running
dmesg | grep -i synaptics
doesn't show anything. However running
dmesg | grep -i psmouse
returns a lot of
psmouse serio1: bad data from KBC - timeout
Last edited by flako (2012-11-08 09:44:59)

I have tried doing that with both linux mint, and now fedora live usb. Neither one loads the touchpad correctly. So yeah, our problems weren't really related
Anyway, I tried looking into the
psmouse serio1: bad data from KBC - timeout
messages, and tried running psmouse proto (defined in /etc/modprobe.conf/psmouse.conf) as both raw and imps as per https://answers.launchpad.net/ubuntu/+s … ion/206950 Unfortunately, that didn't solve anything. Using the raw setting meant that the touchpad wasn't loaded at all (as in not appearing in the Xorg.log at all).
The laptop is quite new, but at the same time what i figured from the touchpad vendor & product ID, the touchpad itself isn't. So it should technically work. Before installing arch i booted into windows to see if everything worked, and found no issues with the touchpad. So I have ruled out any hardware errors. Maybe its just the Fn-key that doesn't work yet in Linux? But that doesn't explain the "psmouse serio1: bad data from KBC - timeout" Any pointers to where I should look/ what commands I should run to delve deeper into this issue?
Last edited by flako (2012-09-09 12:10:51)

Powerbook G4 17" Keyboard or touchpad not working at all.

So I have this computer and it used to work perfectly until i decided to add some ram. When I did, something must have shifted and caused a short circuit at the L90 inductor, right beside the keyboard/touchpad connector. The power button still works, and the computer is FULLY usable through VNC. And with my limited knowledge in Macs I cant figure out the precise type of inductor I blew. It's a 3 Cent piece that i can see is all charred and burnt but i don't know what to replace it with.
Any help would be appreciated.
Thanks

rich420 wrote:
Well I know what the problem is. Its the actual light and connection of the battery and light, it must be loose. Because when I pinch or mess around with the bottom of my phone just under my keys(where there seems to be a piece that could disasswmble from the phone), the light comes on and stays on when I hold it tight, and it flickers and flashes when I fiddle with it.
I wish you had the foresight to tell me upfront that you knew what the problem was -- there would be a little less guessing on my part and I would be able to get straight to the point.
rich420 wrote:
Would it be a good idea to disassemble my whole BB to see if I can fix in the problem inside? Or is that a bad idea? (I don't think I can return it, its my moms old phone, I don't know how long she has had it for). Thanks guys!
I don't know if you can fix it or not... someone who has done it before might could, for sure.
For a loose battery connection? Just place a business card a folder sheet of typing paper on top of the battery, replace the battery door and see how that works.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HP Pavilion DV 6000 Mouse/Touchpad Not Working at All PLS HELP!

Similar Messages

Maybe you are looking for