HP Pavilion dv4 Notebook, LED Error Code blinks everlasting

Hi
When I turn on my Pavilion dv4 Notbook the screen is black, the powersupply LED stays on, the Wifi LED is orange, Speaker LED is orange too and the volume adjustment LED is white.
The LED's near capslock and numlock blink. There is this site with several different LED error codes from 1 to 6 blinks. But mine blinks forever without stopping once it has started.
What does this mean and how can I fix it?
Thanks, John

Hello again trishjax,
Thank you for the update on your issue is has helped. I agree with you based on what you just posted it definitely sounds like something has broken loose of the solder on your computer. The only thing I can suggest is you either contact HP Technical Support for repair options, or go to a local computer repair shop and have it looked at. If it is a hardware issue this is really your only option if you do not know how to do it yourself.
I know it was not the answer you were looking for, but I believe it will help you with your issue. I would like to thank you again for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

Replaced CPU same LED error code for CPU problem continues to occur

I have a dv6-1280us laptop that does not start. I can hear the optical and HDD, screen is blank the number lock and cap lock LED blinks once between pause. The chart indicates that the CPU needs to be replaced. I replaced the CPU with a new one from HP. I still am getting the same LED error code. Any suggestions on resolving this problem. Thanks.

atlantrace wrote:
I have a dv6-1280us laptop that does not start. I can hear the optical and HDD, screen is blank the number lock and cap lock LED blinks once between pause. The chart indicates that the CPU needs to be replaced. I replaced the CPU with a new one from HP. I still am getting the same LED error code. Any suggestions on resolving this problem. Thanks.
It's either a corrupted BIOS or motherboard problem. Since you've already replaced the CPU, the only other option is to replace the motherboard.

LED error codes to the HP ZR2740w monitor

I'm looking for the LED error codes for the HP ZR2740w monitor. The blue light flashes on the front of the monitor and thats all it does, so i'm trying to figure out what it is saying is the issue. Thank you for any help or direction you can give me. Thank you

Please Click Here to find more information about troubleshooting your HP ZR2740w Monitor
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP

Graphic accelerator reinstall? Product name: HP Pavilion dv4 Notebook PC

Product name: HP Pavilion dv4 Notebook PC
Product number: WA696UA#ABA
Windows 7 Home Premium 64-bit Service Pack 1
I uninstalled my Graphics in control panel/devise manager
My genius friend told me it would reinstall automatically when I restart....it did not.
I would like some assistance reinstalling.
Thanks in advance
This question was solved.
View Solution.

Hi:
Sometimes it does, and sometimes it doesn't.
Based on the product specs for your notebook, here is the link to the graphics driver you need to reinstall...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79613-2&cc=us&dlc=en&lc=en&...

Sat Pro A40: LED Error Codes

I have a Sat Pro A40 that worked ok for a while then started locking up. Now at power on the power LED flashes a code but I cannot find the code anywhere.
Code is "short long short short short short short long"
Any one got an idea whet this code is ?
Steve

Hi
Unfortunately I have not found any public documents about the led error codes.
Only the ASP has documents about the error codes and he should know what it means.
As far as I know short means 0 and long is 1.
In this case the code means 0100 0001
I would recommend to contact the ASP for the detailed description.

1 blink led error code or not?

On my dv7, I'm getting what appears to be error code 1, 1 blink which means cpu failure. I am not sure however if it is 1 blink or just blinking forever. It goes 1 blink, 1.5 seconds pass another blink and it keeps doing this forever, it does not stop. I would just like confirmation if this is 1 blink or not?
Pavilion Dm4 1165dx
2.4 ghz Core i5 M450
7200 rpm 500gb hd
4 gb ddr3

well based on what you said if there is an interval of 1.5 seconds and if its the capslock/numlock which is blinking then yes thats for the CPU ERROR. Try checking with hp tech maybe your still in warranty..
Please hit the KUDOS star if my post was helpful..

8540w no display port video output and strange LED error code

Greetings,
my HP 8540w (I5 M 560, Quadro FX 880M) recently started acting a bit strangely.
First the graphics card driver started crashing.
A couple of days ago it started showing this strange I presume it to be an error code:
https://dl.dropboxusercontent.com/u/29403117/IMG_0902.JPG
And today the display port output doesn't detect any monitor (VGA works). The laptop is docked on a HP basic docking station and out of the three display output options only the VGA works.
I've searched the web and found that error codes are displayed only via the blinking num lock and caps lock LEDs. The amber Wi-Fi and HDD LEDs turn on when the laptop is turned off and operate with normal colors while the laptop is turned on.
Has anyone seen this kind of behavior before, will the graphics card have to be replaced or can this be fixed?
Thank you for your replys and best regards.

Hi tehnikk,
Your EliteBook 8540w is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Led error codes

My laptop gave an error code with led blinks and I need help figuring out how many blinks there are?
I filmed the sequence but am not sure how to upload video on site

Please Click Here to find more information about troubleshooting your HP ZR2740w Monitor
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP

HP 650 notebook BSOD error code : 0xc0000034

I have a HP650 notebook (Windows 8.1) and have for about 20 months. I ran a battery check and it said to calibrate it so i did so by going into the HP diagnostic test or something by pressing F2/escape on start-up. I ran it fine and it went for about 2 hours and upn completion it said it worked. It then restarted the laptop and i got a BSOD. It read "Your PC needs to be repaired. The boot configuration data file is missing some required information. File /BCD . Error code:0xc0000034. You'll need to use the recovery tools on your installation media." After looking online for a couple of hours someone told me to run an elevated command prompt and type in the following in order: "Bootrec /fixmbr, Bootrec /fixboot, Bootrec /scanos. Bootrec /rebuildbcd". After doing so it worked and i backed up everything on my laptop. My question is why did this happen. It must of had to been something to do with the battery configuration. Anyway, how can i stop this from happening in the future? Will it happen again or is it fixed as i typed those specific commands above and it worked or are the commands just a temporary fix or something? Also can i run the battery check again just to double check it worked or do you think i will get the BSOD error message again?
Thanks

Hello, @arsenal234123
To get your issue more exposure I would suggest posting it in the commercial forums since the HP 650 Notebook PC is a commercial product. You can do this at Notebook - HP ProBook, ZBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
The support page for your product may be helpful in the meantime:
HP 650 Notebook PC.
I hope this helps!
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Where to find LED error codes for Portege 4010?

Hi,
My Portege 4010 isn't working, and the AC indicator is blinking an error code (either 0xA or 0x50 depending if I should interpret the first bit as least or most significant). I've tried searching, and I've found a fairly detailed guide that includes these error codes for the Portege M100 and M300 (at http://tim.id.au/laptops/toshiba/portege%20m100.pdf and http://tim.id.au/laptops/toshiba/portege%20m300.pdf) but I can't find anything for the 4010. So can anyone give me a location (ideally official Toshiba) for a document detailing the meaning of the error codes for my model?
Thanks,
Jes

See for 'REP messages' in help menu.

Z77 mpower led error code 64 after long POST

Hey guys. I am new to this forum, But I have been having a frustrating issue with my new mpower board.
everything seems to be working fine... runs fine recognizes all of my hardware. plays games and the whole works. however there is one problem. the board takes forever to POST. it will stick on b4 on my screen and on the debug led with a 64, I looked in my manual and found that error code 64 means late CPU initialization. what does this mean I tested my ram by testing each stick in different dim slots and it makes no difference I tried putting my hdd's in different SATA ports and nothing changes. I am running the latest bios I checked. is this an issue I should be worrying about or being everything is running fine not to fuss about it? I just want to make sure everything is running like it should any help is much appreciated being my pc knowledge is limited.
z77 mpower
i7 3770k 3.5 ghz
2x4 gb corsair vengeance @1866
120 gb Samsung 840 pro
1tb WD caviar black 7200 rpm
gtx 690
850w ocz psu
corsair h100i

the B4 is a USB hotplug issue. remove the front pannel USB 2.0 header connectors and see if that stops. if not remove 1 USB device at a time!
the 64 may be related to the USB hotplug issue and its stoping the CPU to hold the post till it leaves the USB and skips it.

Hp Pavilion dv4 Notebook Hard Disk error

Everytime I attempt to boot up my laptop, I am greeted with: "Hard Disk Error, Please run the Hark Disk Test in System Diagnostics, Hard Disk 1 (3F1)" Upon running the Hard Disk test, Quick test returns "Hard Disk 1 Fault", and Full test returns Hard Disk 1 Fault, SMART check returns as passed. What happened? Do I need to buy a new laptop?
Edit: After pressing escape to exit, up at the top left it says: Hard Disk Test Failed, Gard Disk 1 Quick (303), Hard Disk 1 Full (305)

No you just need to replace the hard drive. Can we have the full model number? A good hard drive is going to cost $75 or so and a super fast solid state drive will be maybe $150+. You might still be able to migrate/clone data. You might also look at the C:\ drive in My Computer or This PC and see how full it is. If you delete some stuff off it might take away the error message although doubtful.

HP-PAVILION DM1-1090EV - Recovery - Error code:0XC0000034

need help please...
I used EASEUS Partition Master software to resize C: drive from 290GB to 50GB, then allocate the new partition 240GB to F: drive
when i try to boot from partition recovery by pressing f11 the following error message is shown

Hi,
Changing the partition sizes or deleting a partition fomr the original partition scheme causes the loss of the ability to access the recovery manager from the normal method. That ability can be resored by preformaing a factory image recovery. Be aware that a recovery is a destructive process and that makes it very different from Windows system restore. It is also an irreversible process.
You will have better results in your attempt to execute a recovery if you use a recovery disk set or usb recovery media.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Recover hp pavilion dv4 notebook

i have lost my recovery partion disk e, i have adisk also but how can i install itand recover my laptop in factory condision

guddudogra wrote:
i have lost my recovery partion disk e, i have adisk also but how can i install itand recover my laptop in factory condision
If you created or bought a copy of the HP Recovery Media for your notebook model, you just insert the disc into your notebook and then restart the computer. The system should boot to the disc (it might require you to press a key) where you can recover the system to factory settings.
If the disc doesn't boot, you might need to go into the BIOS settings and change the boot order/boot options so that the optical (internal CD/DVD) is the first boot device.

Led error codes z77a-gd65

hey guys
just got my z77a-gd65 and whenever i turn it on i have it flash a bunch of numbers on the led indicator at the bottom of the board, after a few seconds it ends up on dE and nothing happens
also the motherboard will not connnect ot the monitor, i have the DVI cable plugged in to my GPU (have also tried HDMI)
system specs are:
MSI Z77a-gd65 motherboard
Intel i5-2550k cpu (no igp so i have the hdmi/dvi cable plugged into gpu)
Saphire radeon 7950 11196-00-40G GPU
Asus Dvd burner DRW-24B1st
Seagate Barracuda 500gb 7200rpm hdd
Crucial M4 64GB SSD
2x4gb Mushkin enchanced blackline Memory (have tried 1 stick/2sticks in the different slots, 1+3, 1, 2, 2+4)
Rosewill Hive 650W PSU
Rosewill Blackhawk case
ASUS VH236H Black 23" 2ms Full HD Widescreen LCD Monitor
Havent even installed W7 yet, cant get a connection to the monitor anyway
all fans spin when i start it up
PSU is installed in case already but all others are not
thanks in advance for the help

Quote from: Noway77 on 29-April-12, 06:32:37
Hi
Did you already try to clear cmos, and an usual fix is also change to gpu to another slot, in your case the middle one.
just tried that didnt work :(

HP Pavilion dv4 Notebook, LED Error Code blinks everlasting

Similar Messages

Maybe you are looking for