HP Pavilion DV5 1235DX - DVD/CDRW Not Working

Recently the DVD/CDRW drive in my HP Pavilion has stopped working.  This is the original drive that came with the laptop which is a LightScribe SuperMulti 8X DVD±R/RW with Double Layer Support.  It has had a couple of problems in the past that like the system ceasing to recognize it or not being able to open the drive that I was able to fix myself.  However, now the drive won't read or recognize discs.  The Computer recognizes the drive, lists it as operable, and all drivers are up to date.  When I insert a DVD/CD there are no sounds or lights to indicate that it is trying to read a disc.  Also, I can only open the drive either mechanically or through the Device Manager by clicking on "scan for hardware changes."  It will no longer open any other way.  
Is this something that I can fix?  or does this indicate that the drive is dead and needs to be replaced?  If so, I've had a little trouble identifying a replacement model on the HP website for PartSurfer and could use a suggestion.  Also, if anyone is familiar with the issue i've been having as described above and is aware of a solution I'll be happy to try this first. Thanks!

Hi
Please try    Run now   from the following link:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
or use the following methods to fix:
http://support.microsoft.com/kb/314060/en-us
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • DVD/cdrw not working correctly

    I have a Satellite A135-S2246 running W/Vista with a Mat**bleep**a 770 DVD/CDRW drive. The DVD/CDRW will only read CD's and not DVD's. It will read a music CD but not the Toshiba Recovery disc or movie. I'm not sure when this started. I have already attempted deleting the upper & lower filters in the registry. I have also tried deleting the device from Device Manager, hoping it would reinstall correctly. TIA for any help.
    Solved!
    Go to Solution.

    Satellite A135-S2246 (PSAD6U-00L00C)
    The DVD and CD read/write are separate.
    It's the most likely component to fail. Any of these part numbers should work.
       K000034420 - K000045660 - K000045650
    Step 5 here shows how to remove the optical drive.
    -Jerry

  • HP Pavilion dv5-2135dx keyboard is not working.

    Is it possible to replace it myself?  If so, HOW???

    Hi,
    The replacement procedure is detailed starting on Page 64 of your Maintenance & Service Guide.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Dvd drive not worked properly

     i have  hp pavilion dv4 series.my dvd drive not worked properly.for that purpose only i went 7 times in your service centre but they won't take action  till now .why u people do like this .i want explation and just change my  dvd drive that's all.

    tcrite,
    Sounds like a bad drive...I would get a replacement. According to Accelerate Your Mac database, it should work without issue.
    Just enter the model number of the drive and select your Powerbook G3 2000, and you will see four reports on this model.
    http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso

  • HP Pavilion DV5-1235dx Bios Driver for windows 8.1

    Hi, I don't find in upgrade services hp, a opcion for my operation system windows 8.1 Pro 64 bits. And Now? Help-me Please!! I Need Update the Bios of my HP Pavilion DV5-1235dx.
    This question was solved.
    View Solution.

    What is happening or not happening with Windows 8.1 that you think a BIOS update would help? The latest BIOS is F.21 and HP has not issued any Windows 8/8.1 support for that model, which was originally a Vista machine.

  • My HP-Pavilion dv6 web cam is not working properly, fluctuating always

    My HP-Pavilion dv6 web cam is not working properly, it is fluctuating always

    re-install drivers and try again. ( also easy capture )

  • DVD is not working in my laptop! HELP! Satellite L305D-S5938

    My DVD is not working in this laptop, it should be right?
    I thought this model can play DVDs AND CDs 
    Again my laptop is Satellite L305D-S5938
    Please help why it is not playing DVDs.
    Thank you

    Thank you for using the Toshiba Laptop Forums. Since there have been no posts to this thread in several days, it is being marked "read only" as part of our routine message board maintenance.
    If you still need assistance, please feel free to post a new message or contact the Toshiba Customer Support Center at 1-800-457-7777.
    Chico

  • Cd/dvd player not working

    my cd/dvd does not work  it does not appear on the the computer list of drives
    does it need reinstalling ? if so how  do i do it
    This question was solved.
    View Solution.

    Hi,
    First, try the automated fixit from Microsoft on the link below.
    Windows 7
    Vista
    Check if the drive is now working.
    If it still doesn't work, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'.  In to the prompt type the following command and hit enter.
    sfc /scannow                 ( note that there is a space between sfc and the / )
    Let the process complete, then type exit and hit enter. 
    Next, click the Start Menu, open the Control Panel and click on Device Manager.  Next click to open DVD/CD-ROM Drives.  Right click the drive and select uninstall.  Do not delete drivers if asked.  When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ).  Let windows reinstall the drive and see if it now works.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I have lost the password and the DVD is not working on my old mac G4 500mhz, how can I get back my password?

    I have lost my password and the DVD is not working on my old mac desktop G4 500mhz. I have tried use the boot up disk to change the admin password. But the DVD did not work. ( I did not touch this machine for years.) But i need retreive something , so I have tried the shell script in the terminal
    1. fsck-y and the mount-uw to try to change and find the service directory's plist to change the password. But after I get the mount -uw, it show illegal option message.
    What I can do now to solve this problem? in shell script or any other way?
    Thx in advance.
    Alfred

    Hi,
    A DVD drive that is not working after many years not used:
    most probably dust on the little laser lens.
    Take the drive out and if you can reach this lens: clean it with pure alcohol on Q-Tip.
    Many people throw away cd or dvd players all the time because they stopped working, and very often it can easily be fixed by cleaning this lens.
    I used to have a G5, where I couldn't access that lens. It was very sensitive to dust.
    I have fixed it several times with compressed air. One time I didn't have canned air, but a bikepump did the trick.
    If you have another mac, I'd try to access the G4 internal disk with firewire target disk mode.
    good luck

  • HP Pavilion g6 Notebook PC - Keyboard not working

    HP Pavilion g6 Notebook PC - Keyboard not working
    My Windows 8 - 64 bit  laptop keyboard stopped working. I tried to uninstall and reinstall as explained in the support pages. but doesn't seem to work.  Is it dead?   what is the solution.  Please help
    Thank you

    Hi,
    While this could be a hardware issue, it's always worth trying the following.
    Open windows Control Panel, open Device Manager, expand Keyboards, right click the entry 'Standard PS/2 Keyboard' and select Uninstall.
    Shutdown the notebook.
    Then unplug the AC Adapter and then remove the battery.  Hold down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Note:  If the keyboard doesn't work when trying to access or navigate the Bios Menu, then this is probably a hardware fault.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • My HP Pavilion dv6-2153ee recovery is not working when i choose it from boot menu selection

    my HP Pavilion dv6-2153ee  recovery is not working when i choose it from boot menu selection . it's run but then the windows run without running recovery. help me please?

    Hello Tajamal, 
    Welcome to the HP Forums!
    I understand the webcam isn't working since upgrading to Windows 8.1. I would have to suggest returning to Windows 8 since there are no 8.1 drivers, as indicated here: HP Pavilion dv6-7043cl Entertainment Notebook PC Drivers
    Please let me know if you have any other questions.
    Have a wonderful day! 
    Mario
    I worked on behalf of HP.

  • Can I restore my system from install discs when DVD is not working?

    Can I restore my system from install discs when DVD is not working?
    There is a disc jammed in the drive and when I try to do an install in Target Firewire mode using a G5 Tower I get an error saying the software cannot be installed on this machine, before I can even select the iMac's drive. I'm using the grey software install discs that came with the iMac.
    Is my only option to open up the iMac and get the jammed disc out?
    Thanks

    Problem solved - I posted on the general Tiger Discussions as well.
    I had the wrong machine started in Target Firewire mode.
    http://discussions.apple.com/thread.jspa?threadID=2180754&tstart=0

  • HP Pavilion g4, reinstall Win7 64bit fm a DVD disc, not work

    I try to fix a problem for my friend's laptop. It is HP Pavilion G4
    running Win 7 64bit OS. The laptop can not start up the windows. I
    press ESC to pause the start up, and run system recovery, it shows BIOS
    setup, system recovery and others, I then press Fn + 11 key to run
    system recovery, but it never runs.
    I then remove the HDD, and connect to my computer to run testing. It
    seems it has something inside corrupted. It takes so long to recognize
    all partitions. I decide to format all partitions and then resize
    them. Afterwards, I run test and chkdsk. Everything is fine with the
    HDD now. I put the HDD back to Laptop, and insert a DVD disc of Win
    7, the laptop does not start from DVD. The screen shows as follows:
    Hard Disk Error
    Please run the Hard Disk Test in System Diagnostics.
    Hard Disk 1 (3F1)
    F2 System Diagnostics
    I visit the above link, I could not find relevant materials.
    If I press ESC to exit start up. I can hear the DVD ROM is running,
    but still not work. The screen shows as follows:
    Startup Menu
    F1 System Information
    F2 System Diagnostics
    F9 Boot Device Options
    F10 BIOS Setup
    F11 System Recovery
    Enter - Continue Start up
    Only F1 would respond when I press. Other Fn does not respond at all.
    Do you have clue and suggestion for me ?

    You do not use Fn + the key indicated.For instance to enter BIOS you simply tap F10. Recovery would have been F11, not Fn + F11.
    You can order Recovery Media from HP for a small fee>> Contact HP
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • DVD player not working in Pavilion DV6-6102sa

    The DVD player in my laptop won't play video DVDs.
    It works okay with data discs, but films etc cause a problem - the drive spins up, and it sounds as though it's trying to read the disc, but not succesfully.
    Depending on the player depends on what happens:
    Windows Media Player may begin showing a garbled and unwatchable version of the disc, whereas VLC won't play anything. After a delay of at least 15 minutes (highly variable), the disc begins playing normally in both.
    According to device manager, the drive is a HP DVDRAM GT31L. I'm running Windows 7 Home Premium 64bit. I've tried many different DVDs, all with the same result, and I've tried both Windows Media Player and VLC with equally useless results.

    To repair permissions go to Applications -> Utilities -> Disk utility -> select the hard disk in Disk Utility, and click on repair permissions in the First Aid section.
    Did you mean to mark my thing as helpful, or solved? I see you marked it solved suggesting the problem has gone away.
    A third party peripheral is any device which you hooked up to the computer that is not made by Apple.

  • DVD drive not working with win 8.1

    Hi. I have HP pavilion 15-e020TU notebook. My DVD drive worked with windows 7 and windows 8. After upgrading to windows 8.1 , the DVD drive is not working. Windows device manager can find the DVD drive but shows a yellow error mark. I selected "Update driver software" and then "Search automatically for updated driver software" . Then the name changed from "Mitsumi CD drive" to "hp DVD A DU8A5SH". And still not working. I installed the firmware update from http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv481en&cc=us&dlc=en&lc=en&jum... But a command prompt shows "Error: no mitsumi drives found." What can I do now ?
    This question was solved.
    View Solution.

    Hi:
    Try each of Resolution Steps 2, 3, 4 & 5 at the link below.
    One of them normally fixes the problem.
    http://support.microsoft.com/kb/314060

Maybe you are looking for

  • Fixed Asset Auditing Configuration

    Dear All, I need a help for doing Fixed Asset Audit Configuration. Any one kindly give me a guide line for how to do the step by step configuration for Fixed Asset Auditing and view the audit report Thanks & Regards, S. Umamageshwaran

  • How do I connect my Mac Book Pro to a Mitsubishi DLP projector?

    How do I connect my MacBook Pro to a Mitubishi DLP Projector?

  • Is there a consensus on how to solve security update issues?

    hi, i'm writing to you from a PPC G4 (AGP graphics) that will self-destruct by the time i switch off and (attempt) to re-start tomorrow. i will then need to do a re-install, just to see if i have gotten any replies (grinds teeth to the root). it will

  • Extract text data from dbc on the fly

    Hi All, I am currently setting up a testsystem for a CAN based project with LV7.1 and Teststand 4. I have my PXI8461 CAN card sending and receiving CAN messages fine but I wish to perform some work on all channel ( signal ) information before passing

  • Ok, so how do we determine if our E61 will work af...

    I have just got my E61 (Code 0530151, FW 1.0610.04.04) from ebay India and last 2 days I have been reading all over the internet about the problems people have faced in upgrading using NSU. I beg someone from Nokia to help me (and I am sure many othe