HP pavilion DV6 1030us shutdown and reboot spontaneously

I bought a HP pavilion DV6 1030us in June 2009, and the Bios was updated to the latest version F24A.
However, during the notebook running, it will sunddenly shutdown and restart again.
Such unexpected shutdown just looks like loss of power suddenly, and happens randomly, at least I can not find a rule.
For most cases, such shutdown comes  without blue screen, and it is operating system- independant.  I tried to install windows 7 64bit, windows 7 32bit, vista 64 bit, xp 32bit, all OS has such problem.
I dont know whether other users with this model has such problem. I tired everything I can do, still can not solve the problem.
I suspect the Bios has some problem. I hope HP will release a new one quite soon.
btw, if I update the BIOS, will it erase the old BIOS completely first, then write into the new one?
Thanks for all your attention!
This question was solved.
View Solution.

Same issue here

Similar Messages

  • Hp pavilion dv6-1030us with windows vista 64 bit now upgraded to windows7 32 bit.

    hp pavilion dv6-1030us originally with windows vista 64 bit now upgraded to windows7 32 bit. mic is unable to send sound in skype after upgradation.
    This question was solved.
    View Solution.

    Hi,
    Try the following.
    First, uninstall Skype and when this has completed, restart the notebook.
    When windows has reloaded, download and reinstall the Chipset driver Here.
    When the installation has finished, restart the notebook again.
    Let windows fully load, then download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45044.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery, plug in the AC Adapter and start the notebook.
    Let Windows fully load, then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again.
    Reinstall Skype and see if the Mic now works Ok.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • XFCE - Shutdown and Reboot buttons greyed-out (SOLVED)

    This issue cropped up for me a couple of weeks ago.  Just sat down to try and find a solution.  Followed several suggestions from several posts to no avail.
    Finally discovered that the syntax for achieving this in "/etc/sudoers" has evidently changed.
    This is what I got from the XFCE site: http://forum.xfce.org/viewtopic.php?pid=21331 and is very similar to what's in the Arch Wiki, https://wiki.archlinux.org/index.php/Al … o_Shutdown. So I had been using the following line in /etc/sudoers and it had been working:
    %users mylaptopname=NOPASSWD: /usr/lib/xfce4/xfsm-shutdown-helper
    At some point in an XFCE upgrade the path to "xfsm-shutdown-helper" changed to "/usr/lib/xfce4/session/xfsm-shutdown-helper"
    I changed the path to "xfsm-shutdown-helper" but that didn't solve the problem.
    Finally I tried this in /etc/sudoers:
    %users  ALL=(ALL)       NOPASSWD: /sbin/shutdown -h now,/sbin/reboot
    And all the usual options in the shutdown menu re-appeared.
    Hope this helps someone.
    (Edited to show the link to the the XFCE forums and the Wiki.)
    Last edited by whatshisname (2011-11-25 16:09:31)

    Replying to my own post because of what I've discovered since I first posted this.
    Most importantly, the fix which I thought had fixed this problem didn't really work.  I was snookered into thinking it had.  But I've found another solution which appears to be working now, thus this post.
    Here's what I've found.
    I had no login/display manager on my laptop.  I was auto-logging into my desktop with this setting in /etc/inittab:
    x:5:once:/bin/su myusername -l -c '/usr/bin/startx >/dev/null 2>&1'
    The snooker alluded to above was this:  If I booted to a command line and issued "startx" to start XFCE, I would have the shutdown and reboot buttons available on the logout dialog.
    But if I booted directly into the desktop, I didn't.  It's taken me a while to figure out that this is what was going on.
    Even though my old setup had worked for the almost 2 years I've been using Arch and XFCE, some upgrade somewhere in  recent months prevented it from working any longer.
    My final fix was to install a login manager, in my case, lxdm.  And set it to auto log me into my desktop.
    I now have the expected reboot and logout menus.
    Hope this helps someone.  This has been a bear to figure out.

  • Shutdown and reboot logging

    Is there any file that keeps shutdowns and reboots track? or
    i should use wtmpx?

    Unia wrote:
    Which one did you install? You have to run it before you can see the icon:
    $ gnome-power-manager
    or
    $ xfce4-power-manager
    Add it to whatever startup script you use to have it launch at boot.
    Note: a power manager won't give you a shutdown dialog AFAIK. At least gnome-power-manager doesn't.
    ...Y'know, I really should've actually tried adding it to my xinitrc! I stupidly assumed that because running it via gmrun or a shell didn't bring up an icon, that adding it to my xinitrc wouldn't make any difference! Thanks a lot Unia
    EDIT: Okay... so I jumped the gun a bit, I tried adding gnome-power-manager and xfce4-power-manager to my xinitrc and both did nothing
    Last edited by Starfall (2011-05-26 18:18:04)

  • Systemd - kdm - xfce session: shutdown and reboot disappears randomly

    I use systemd and kdm as login manager; my desktop is XFCE.
    Immediately after login, if I click the logout button applet in the xfce panel, I can access all the options (shutdown, reboot, etc).
    But sometimes, after a while during the session, the shutdown and reboot option simply disappear - only logout works. If I log out to KDM and then again log in, they reappear.
    Does anyone have a clue about this?

    Just FYI the wikis were updated:
    Note: slim is ConsoleKit capable since version 1.3.3. Unless you happen to run an old version, you must no longer include ck-launch-session in your .xinitrc or slim.conf login_cmd.
    https://wiki.archlinux.org/index.php/Sl … vironments
    SLiM is also ConsoleKit capable since version 1.3.3. Unless you happen to run an old version, you must not use --with-ck-launch from your .xinitrc or slim.conf login_cmd.
    https://wiki.archlinux.org/index.php/Xfce#Manually

  • HT5390 have a Mac mini server in the data center no physical access. Is it possible to configure a remote "console" that allows shutdown  and reboot remotely ?

    A mini mac used for building sits in the data center normally we access via VNC network connection.
    I want to have "console" access to shutdown and reboot system.
    Reason. Updated to Mountain Lion OS X from 10.7.x and lost VNC connections, now host is down with no physical access.
    Alternate is to call data center and see if someone can cycls the power ?

    As mentioned by Linc there is no 'lights out' management for the Mac mini (or any current Mac). If the Mac is still running you can initiate a reboot via the GUI or commandline. If however it is completely crashed then there is a solution you could consider which is to get a managed power distribution strip. With this the power strip has its own network connection and lets you remotely turn off (and on) individual power sockets. This would then let you 'hard reboot' the Mac mini even if crashed.
    See http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=ap7921& tab=features

  • Nano 7 auto shutdown and reboots after playing videos?

    Hello,my nano 7 is very new, and i just tried to sync videos into it today. when i tried to play them, it would automatically shutdown and reboot.Anyone know how to solve this or have similar problems?

    Okydoky a new fascinating bug has been found!
    I now relabeld all songs with no album with a "no album" tag. I thought I could handle that way the problem with the "no album bug", well I thought. Now all the songs are shown in the display but I can't play all songs through because the player hangs up. When I select just one album to play through it works fine.
    *thumbs up* great mp3 player Apple! *thumbs up*
    Windows XP Pro

  • [SOLVED] Run script on systemd shutdown and reboot

    Hello!
    I am trying to log uptime on shutdown and reboot with no success.
    I create the file /usr/lib/systemd/system/uptime.service:
    [Unit]
    Description=/etc/rc.local.shutdown Compatibility
    ConditionFileIsExecutable=/etc/rc.local.shutdown
    DefaultDependencies=no
    After=rc-local.service basic.target
    Before=shutdown.target
    [Service]
    Type=oneshot
    ExecStart=/etc/rc.local.shutdown
    StandardInput=tty
    RemainAfterExit=yes
    [Install]
    WantedBy=shutdown.target
    /etc/rc.local.shutdown:
    [jribeiro@arkosta ~]$ ls -l /etc/rc.local.shutdown
    -rwxr-xr-x 1 root root 107 Out 24 12:42 /etc/rc.local.shutdown
    [jribeiro@arkosta ~]$ cat /etc/rc.local.shutdown
    echo "$(date) - $(/usr/bin/uptime | sed 's/.*up \([^,]*\), .*/\1/')" >> /home/jribeiro/registo_de_uptime
    Any ideas?
    Last edited by joseribeiro (2014-10-25 19:57:59)

    I altered the uptime unit file:
    [jribeiro@arkosta ~]$ cat /usr/lib/systemd/system/uptime.service
    [Unit]
    Description=/etc/rc.local.shutdown Compatibility
    Before=shutdown.target
    [Service]
    ExecStart=/bin/true
    ExecStop=/etc/rc.local.shutdown
    RemainAfterExit=yes
    [Install]
    WantedBy=shutdown.target
    Then I started the uptime service manually:
    [jribeiro@arkosta ~]$ sudo systemctl start uptime
    I checked the 'registo_de_uptime' file:
    [jribeiro@arkosta ~]$ cat /home/jribeiro/registo_de_uptime
    Sáb Out 25 19:43:31 WEST 2014 - 2 min
    After that I rebooted my system.
    I checked the 'registo_de_uptime' file, again:
    [jribeiro@arkosta ~]$ cat /home/jribeiro/registo_de_uptime
    Sáb Out 25 19:43:31 WEST 2014 - 2 min
    Sáb Out 25 19:44:27 WEST 2014 - 3 min
    Everything seems to be alright. I wanted to make the ultimate test.
    With that in mind I rebooted the system.
    I checked the 'registo_de_uptime' file, once more:
    [jribeiro@arkosta ~]$ cat /home/jribeiro/registo_de_uptime
    Sáb Out 25 19:43:31 WEST 2014 - 2 min
    Sáb Out 25 19:44:27 WEST 2014 - 3 min
    No success...
    It works when I start the service manually and in the right next reboot, after that it won't work.
    Here is the journal's ouput:
    [jribeiro@arkosta ~]$ sudo journalctl -b -0 -u uptime
    -- Logs begin at Sex 2014-10-24 22:02:03 WEST, end at Sáb 2014-10-25 20:05:29 WEST. --
    By the way:
    [jribeiro@arkosta ~]$ sudo systemctl status uptime
    ● uptime.service - /etc/rc.local.shutdown Compatibility
    Loaded: loaded (/usr/lib/systemd/system/uptime.service; enabled)
    Active: inactive (dead)
    Last edited by joseribeiro (2014-10-25 19:07:32)

  • [SOLVED]Disable Shutdown and Reboot from XFCE

    Hi all
    I would like to disable the shutdown and reboot buttons from XFCE (4.10) or to do disable shutdown/reboot systemwide.
    I searched for specific xfce instructions and all i could find was using xfconf-query[1] and afaik it can only disable hibernate and suspend buttons
    [1]http://forum.xfce.org/viewtopic.php?id=4781
    Last edited by boriscougar (2012-09-11 21:51:22)

    @nadman10
    it had no change to remove my users from the power group
    @2ManyDogs
    Creating that file (/etc/xdg/xfce4/kiosk/kioskrc) and setting which users could shutdown solved the problem
    Thanks for your time

  • [SOLVED] XFCE shutdown and reboot buttons only dump out to prompt

    Recently, after an update, the XFCE shutdown and reboot buttons began not working as expected.  Both are present, and I can click them.   They seem to try to do what they should, XFCE does terminate, but I am dumped out to a shell prompt rather than the shutdown or reboot happening.   What might be a possible cause of this behaviour that I can check and correct?
    Thanks,
    Bill
    Last edited by wallenpb (2012-11-20 21:00:19)

    Are you running systemd or still a sysv/initscript setup?
    If it is the latter take into account that consolekit has been dropped. Therefore, as far as I understand it, you are not 'authenticated' and thus not allowed to either shutdown or reboot.
    Consider switching to systemd and a good start would be to comply with the 1st step of the systemd installation featured in the wiki to regain control of shutdown/reboot. Afterwards start investigating for the rest as initscripts support has ended.

  • Xfce shutdown and reboot disabled with startxfce4

    Hello.
    I try to fix twinview with my nvidia xorg.conf .And run over this kind of issue.
    From the beginning with xfce i only have a logout button no shutdown and reboot.(i can live with that)
    I start with startxfce4.
    In my xinitrc from wiki    exec ck-launch-session startxfce4  and i have dbus in /etc/rc.conf
    But when i start with startx instead all the buttons are there. I can live with that to .
    An explaination why startx working and startxfce4 not ?? Can it be a bug somewhere?
    Last edited by freddie (2011-02-20 10:01:23)

    lockheed  you could always shutdown like this from wiki, thats what i do.
    https://wiki.archlinux.org/index.php/Al … o_Shutdown
    I have all suggestions from from this thread. And i not use any display manager.
    That was more of a surprice that i got shutdown, restart, hibernate, sleep with startx instead of startxfce4. I dont know if more xfce users can do this.
    And for me i dont need to have shutdown, restart, hibernate, sleep in the panel.More curious why startx works and startxfce4 not like i say in my first post.
    Last edited by freddie (2011-02-20 12:36:17)

  • Shutdown and Reboot without going root

    Is there a way I can use the reboot or poweroff commands without using sudo or root?  Or is this a bad idea?
    Last edited by Falcata (2008-09-04 00:19:30)

    mcmillan wrote:
    My question:  What is the difference between 'chmod +s halt' and NOPASSWD for shutdown as you suggested?  I am not familiar with NOPASSWD.
    NOPASSWD is specified when you configure sudo, so some commands will be executed without asking for your users password. This is probably why it wasn't working for your menu, the computer was waiting for a password but there wasn't a way to display that request or enter it in.
    That makes sense, and is in line with what I figured was going on.  With NOPASSWD which commands would be executed w/out asking for a password?  How would this be more "secure" than using chmod +s on halt and reboot?  It seems that both ways accomplish the same thing in the end, I am just trying to understand why one is better than the other.
    moljac024 wrote:
    mcmillan wrote:
    My question:  What is the difference between 'chmod +s halt' and NOPASSWD for shutdown as you suggested?  I am not familiar with NOPASSWD.
    NOPASSWD is specified when you configure sudo, so some commands will be executed without asking for your users password. This is probably why it wasn't working for your menu, the computer was waiting for a password but there wasn't a way to display that request or enter it in.
    Exaclty. So you could specify the NOPASSWD parameter for the shutdown command and sudo will just do it without asking for the password. You should have an example of how to use that in your sudoers file. If not, then
    man sudo
    Please excuse my ignorance, but how is this better than chmod +s, which allows my user to use it w/out sudo?  It seems as though one lets ME use sudo w/out a password, the other lets ME use the command w/out sudo.  What is the benefit to using sudo without a password, other than not having to physically type the password?
    Last edited by monstermudder78 (2008-09-04 23:13:40)

  • HP Pavilion DV6-6c00tu Software And Drivers Required

    Hi everyone !!
    Guys i need your help... please help me and guide me ..
    i need hp pavilion dv6-6c00tu all softwares and drivers ..up to dated
    Required some Software and Driver Applications for Hp pavilion dv6-6c00tu... Windows-7 Professional 64-Bit
    1-HP Simplepass 2012 64-bit windows updated driver (Windows 7 Professional)
    2-HP Techcenter Startup for download "
    3-HP CoolSense Software "
    4-HP Pavilion dv6-6c00tu Intel Chipset Installation Utility and Driver 9.2.0.1030 for Windows 7: Professional
    5-HP Pavilion dv6-6c00tu IDT High-Definition (HD) Audio Driver 6.10.6345.0 for Windows 7: Professional
    6-HP Pavilion dv6-6c00tu Intel Management Engine Interface (MEI) Driver 7.0.0.1144 for Windows 7 Professional
    7-HP Pavilion dv6-6c00tu AMD High-Definition Graphics Driver 8.882.2.3000 for Windows 7: Professional
    8-HP Pavilion dv6-6c00tu Intel High-Definition (HD) Graphics Driver 8.15.10.2476 for Windows 7 Professional
    9-HP Pavilion dv6-6c00tu Intel Wireless Drivers, Intel PROSet, and Intel My WiFi for Windows 7: Professional
    10-HP Pavilion dv6-6c00tu Ralink 2011 802.11 b/g/n WiFi Adapter 3.2.7.0 for Windows 7 rofessional
    11-HP Pavilion dv6-6c00tu Realtek Local Area Network (LAN) Driver 7.41.216.2011 for Windows 7 rofessional
    12-HP Pavilion dv6-6c00tu Essential System Updates 4.00 for Windows 7 rofessional
    13-HP Pavilion dv6-6c00tu Intel Wireless Display Software 3.0.13.0 for Windows 7 rofessional
    14-HP Pavilion dv6-6c00tu Movie Store powered by RoxioNow Application 210B96A for Windows 7 rofessional
    15-HP Pavilion dv6-6c00tu Application Assistant Software 1.1.466.3970 for Windows 7 rofessional
    Hp power manager is not working
    Hp coolsense is not working
    Hp Techcenter startup software/driver required
    Hp Pavilion Dv6-6c00tu all HP games
    Guys i am waiting your reply.. please prompt quick.
    Thanks!!

    Try downloading the HP Support Assistant and running it. It should be able to detect any missing drivers for you.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Pavilion DV6, Black Screen and 3 Caps Lock Blink

    HI,
    I have an Hp Pavilion DV6 and I am getting the 3 blinks on the caps lock. When I turn on the PC it starts up, the caps lock blinks 3 times and the screen is just black. I have already tested the memory sticks, drain the battery, and hooking it up to an external monitor.  Nothing shows on the other monitor and it just remains black. Please help!

    Hi @shmurray,
    Welcome to the HP Support Forums!
    I understand you are getting a blink pattern on the Caps lock LED, when you turn on the notebook. I am happy to help you with this.
    I am including the page on the error codes for your reference: Blank Screen LED Error Codes
    From that document the pattern you are getting indicates a memory problem. You said that you have tested the memory. What exactly did you try?
    The document suggests reseating the RAM or trying a new set of RAM and then restarting the notebook. If you are still getting a memory problem after trying both of those things, ie a 3 blink code again, then it would likely suggest that there is a problem with the motherboard itself, either with the memory slot or one of the controllers related to memory.
    In that case I would suggest contacting the technical phone support number at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    If however reseating the memory or replacing it leads to a different error code or message please let me know, Although in that case the following may be helpful if you still have a blank screen.
    Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot
    Here are some other sources I found that may be helpful to you.
    Resolving Problems with Notebook Displays (Windows 7 and Windows 8)
    I hope that this is helpful to you.
    Regards,
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • I am using Mountain Lion on a Macbook Pro and for some stupid reason it decides to shutdown and reboot randomly. I have tried reinstalling it, thought it might be some software, so I uninstalled the software. There is no application or particulaerr task c

    Hi All.
    Mountain Lion for some stupid reason keeps shutting down and rebooting on me. It is random and not associated with any particular task or program/software. I tried reinstalling Mountain Lion but the f'n thing still keeps doing it. I am trying to write a thesis and I have lost work because of this. If I can't get this sorted I am going to go back to using Lion.
    Thanks for any help you can provide.
    Brett

    I'm having the same problem at least once a day! This is the latest panic log,  any help is appreciated, thanks!
    Wed Sep 12 08:59:28 2012
    panic(cpu 0 caller 0xffffff7f8fb9ec85): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xffffff80aeb35000 0x0a5480a2, D0, P2/4
    Backtrace (CPU 0), Frame : Return Address
    0xffffff808afa32d0 : 0xffffff800f41d5f6
    0xffffff808afa3340 : 0xffffff7f8fb9ec85
    0xffffff808afa33d0 : 0xffffff7f8fc985b7
    0xffffff808afa3430 : 0xffffff7f8fc9862b
    0xffffff808afa34a0 : 0xffffff7f8ffad883
    0xffffff808afa35e0 : 0xffffff7f8fcbe75d
    0xffffff808afa3610 : 0xffffff7f8fba89e6
    0xffffff808afa36c0 : 0xffffff7f8fba40b8
    0xffffff808afa38b0 : 0xffffff7f8fba5b4d
    0xffffff808afa3980 : 0xffffff7f90c2043c
    0xffffff808afa39b0 : 0xffffff7f90c2073c
    0xffffff808afa39d0 : 0xffffff7f90c213ae
    0xffffff808afa39f0 : 0xffffff7f90c1d5e6
    0xffffff808afa3a20 : 0xffffff7f90bfadc0
    0xffffff808afa3a50 : 0xffffff7f90be76f3
    0xffffff808afa3aa0 : 0xffffff7f90be76ab
    0xffffff808afa3af0 : 0xffffff7f90be60f1
    0xffffff808afa3b10 : 0xffffff7f90c09f80
    0xffffff808afa3b40 : 0xffffff800f863e8b
    0xffffff808afa3bc0 : 0xffffff800f865eb3
    0xffffff808afa3c20 : 0xffffff800f8638ef
    0xffffff808afa3d70 : 0xffffff800f4981a1
    0xffffff808afa3e80 : 0xffffff800f420abd
    0xffffff808afa3eb0 : 0xffffff800f410448
    0xffffff808afa3f00 : 0xffffff800f4195fb
    0xffffff808afa3f70 : 0xffffff800f4a5ad6
    0xffffff808afa3fb0 : 0xffffff800f4ced13
          Kernel Extensions in backtrace:
             com.apple.NVDAResman(8.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f8fb37 000->0xffffff7f8fe39fff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f8faac000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f8fb23000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f8fae0000
             com.apple.nvidia.nv50hal(8.0)[9CD95A4A-FD94-349E-A4B6-FC3B74E197F5]@0xffffff7f8 fe47000->0xffffff7f90169fff
                dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f8fb 37000
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f8faac000
             com.apple.GeForce(8.0)[4B9BE287-5251-398E-96B0-BB16C9BFB2D9]@0xffffff7f90bc6000 ->0xffffff7f90c88fff
                dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f8fb 37000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f8fb23000
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f8faac000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f8fae0000
    BSD process name corresponding to current thread: firefox
    Mac OS version:
    12B19
    Kernel version:
    Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
    Kernel UUID: 3005059E-270B-3B9F-940D-7A66C05DDC9D
    Kernel slide:     0x000000000f200000
    Kernel text base: 0xffffff800f400000
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 366852391265
    last loaded kext at 182698949955: com.apple.filesystems.smbfs          1.8 (addr 0xffffff7f8fa16000, size 229376)
    last unloaded kext at 221779684551: com.apple.driver.AppleUSBUHCI          5.1.5 (addr 0xffffff7f90429000, size 65536)
    loaded kexts:
    com.apple.filesystems.smbfs          1.8
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AGPM          100.12.69
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AppleHDA          2.3.0f2
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleMikeyDriver          2.3.0f2
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f8
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.driver.AppleSMCLMU          2.0.2d0
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleMuxControl          3.2.6
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.GeForce          8.0.0
    com.apple.driver.AppleIntelHDGraphics          8.0.0
    com.apple.driver.AppleIntelHDGraphicsFB          8.0.0
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager          4.0.9f8
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.ApplePolicyControl          3.2.6
    com.apple.driver.SMCMotionSensor          3.0.2d6
    com.apple.driver.AppleUSBTCButtons          235.4
    com.apple.driver.AppleUSBTCKeyboard          235.4
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.driver.AppleUSBCardReader          3.1.0
    com.apple.driver.AppleIRController          320.15
    com.apple.iokit.SCSITaskUserClient          3.5.1
    com.apple.driver.XsanFilter          404
    com.apple.driver.AppleUSBHub          5.1.6
    com.apple.iokit.IOAHCIBlockStorage          2.2.1
    com.apple.driver.AirPort.Brcm4331          601.15.21
    com.apple.driver.AppleFWOHCI          4.9.5
    com.apple.driver.AppleUSBEHCI          5.1.5
    com.apple.driver.AppleAHCIPort          2.4.0
    com.apple.iokit.AppleBCM5701Ethernet          3.2.5b3
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleACPIButtons          1.6
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.6
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2
    com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
    com.apple.kext.triggers          1.0
    com.apple.driver.DspFuncLib          2.3.0f2
    com.apple.iokit.IOAudioFamily          1.8.9fc9
    com.apple.kext.OSvKernDSPLib          1.6
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f8
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleHDAController          2.3.0f2
    com.apple.iokit.IOHDAFamily          2.3.0f2
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.2.0d16
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.nvidia.nv50hal          8.0.0
    com.apple.NVDAResman          8.0.0
    com.apple.iokit.IOSurface          86.0.2
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.iokit.IOBluetoothFamily          4.0.9f8
    com.apple.driver.AppleGraphicsControl          3.2.6
    com.apple.iokit.IONDRVSupport          2.3.4
    com.apple.iokit.IOGraphicsFamily          2.3.4
    com.apple.driver.AppleSMC          3.1.3d11
    com.apple.driver.AppleUSBMultitouch          235.7
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
    com.apple.iokit.IOUSBMassStorageClass          3.5.0
    com.apple.iokit.IOUSBHIDDriver          5.0.0
    com.apple.driver.AppleUSBMergeNub          5.1.5
    com.apple.driver.AppleUSBComposite          5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
    com.apple.iokit.IOUSBUserClient          5.0.0
    com.apple.iokit.IO80211Family          500.15
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOAHCIFamily          2.2.0
    com.apple.iokit.IOUSBFamily          5.1.6
    com.apple.iokit.IOEthernetAVBController          1.0.2b1
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.8.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          344
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.6
    com.apple.iokit.IOPCIFamily          2.7
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0

Maybe you are looking for

  • Problems Viewing Flash in Safari

    I posted this over three days ago, got 49 views, and exactly zero replies! So I am reposting in high hopes that someone can suggest something, anything that I can try. Thanks for viewing anyway... +I am trying to troubleshoot for my sister who has an

  • CS6 Encore - images not showing up in backgrounds

    I want to import my images to use as menu backgrounds. When I import the images they show up in the "diplay images" but not "display of backgrounds". In fact, I have no backgrounds showing up. Thanks for any help.

  • How to send a fax with eFax

    This is a video that shows how one can send an efax once they have set up the efax account.  The printers that this video addresses are the following printers. Photosmart 7510 Photosmart eStation C510 Envy 100 Envy 114 Officejets do not have free eFa

  • HT3702 How do I cancel an App Store purchase

    I was billed 150 dollars when my grandchild hit purchase how do I cancel the purchase

  • Data Migration - SAP EC - Environmental Compliance

    Hi, I'm in a Project here in Brazil and they will start to use the portal SAP EC and I have to do the data migration. I read in some manuals about the "Export Excel Template", but I don't know if this is the correct way to do the data migration for t