HP Pavilion dv6 1133-ea Windows Vista SP2

So after install windows vista sp2, I have noticed that the sound has disappeared...all the drivers are installed! AND I really cannot see why the sound would not be there because the drivers and everything are fine...is it some sort of compatability problem?

Hi,
Try the following.
First, uninstall Skype and when this has completed, restart the notebook.
When windows has reloaded, download and reinstall the Chipset driver Here.
When the installation has finished, restart the notebook again.
Let windows fully load, then download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45044.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery, plug in the AC Adapter and start the notebook.
Let Windows fully load, then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Reinstall Skype and see if the Mic now works Ok.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Hp pavilion dv6-1030us with windows vista 64 bit now upgraded to windows7 32 bit.

hp pavilion dv6-1030us originally with windows vista 64 bit now upgraded to windows7 32 bit. mic is unable to send sound in skype after upgradation.
This question was solved.
View Solution.

Hi,
Try the following.
First, uninstall Skype and when this has completed, restart the notebook.
When windows has reloaded, download and reinstall the Chipset driver Here.
When the installation has finished, restart the notebook again.
Let windows fully load, then download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45044.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery, plug in the AC Adapter and start the notebook.
Let Windows fully load, then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Reinstall Skype and see if the Mic now works Ok.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

No sound witnessed from my HP pavillion dv6 notebook pc, windows vista home premium

their is no sound from my hp pavillion dv6 notebook pc, windows vista home premium, trouble shooted online through microsoft, windows but no issues found, restored to an earlier date. yet it is not working.
core 2 duo cpu, T6500 @2.10 GHz
the message received is:
Windows Media Player encountered a problem while playing the file. For additional assistance, click Web Help.
but web help found no problems with the pc
Kindly help activate the sound system

Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop and install using the downloaded file.
```````````````````````````````````````
If still no sound,try a hard reset, works sometimes.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Windows Vista SP2 fails to install

When I install Vista SP2 on my Vista Ultimate X86 on my dell optiplex 745 I get the following error
Installation was not successful
error true_e_nosignature(0x800b0100)
I tried running the System Update Readiness and the standalone installer and didn't work. here is the log of the System Update Readiness.
Checking System Update Readiness.
Binary Version 6.0.6002.23186
Package Version 25.0
2014-11-28 10:08
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
(f)   CBS MUM Missing   0x00000002   servicing\Packages\Package_for_KB957321~31bf3856ad364e35~x86~~6.0.1.0.mum
Checking Component Store
Summary:
Seconds executed: 1353
Found 1 errors
CBS MUM Missing Total count: 1
Unavailable repair files:
   servicing\packages\Package_for_KB957321~31bf3856ad364e35~x86~~6.0.1.0.mum
   servicing\packages\Package_for_KB957321~31bf3856ad364e35~x86~~6.0.1.0.cat
Checking CoreOS key for repairing corruptions.
Winner version: 6.0.6001.18000.
Processor architecture: x86.
Check key to be repaired: wcm://Microsoft-Windows-CoreOS?version=6.0.6001.18000&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers\metadata\elements\ComputerName
Recreated value: @_type.
Recreated value: @dataOnly.
Recreated value: @default.
Recreated value: @description.
Recreated value: @displayName.
Recreated value: @handler.
Recreated value: @legacyName.
Recreated value: @legacyType.
Recreated value: @migrate.
Recreated value: @scope.
Recreated value: @xsd:type.
Also Microsoft Tinker, Dreamscene, Microsoft .NET framework 3.5 Service Pack 1 and .NET framework 3.5 Family update (KB951847) and others failed too.

Further examination showed, that the problem lies in the expired digital signatures
of the MSI-s that clickonce tries to download.
Please see attached image Capture.PNG.
I also reported this bug to the Microsoft Connect: https://connect.microsoft.com/VisualStudio/feedback/details/1082242/clickonce-unable-to-install-localdb-2012-on-windows-vista-sp2
The problematic MSI-s shoud be signed again. Can I expect from Microsoft to resolve
this?
Hello,
Based on your description, it seems that this issue only occurs on Windows Vista SP2, and I get that connect you shared and have helped to vote it.
I think that Microsoft engineers will evaluate them seriously and provide you better support. In addition, you can post the answer here once the issue is resolved.
Best regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HP Pavilion DV6 Notebook -VX070AV, Windows 7 64-bit- no sound

HP Pavilion DV6 Notebook -VX070AV, Windows 7 64-bit.
IDT High Definition Audio CODEC Enabled stwrt64.sys 6.10.6289.0
Intel (R) Display Audio Enabled IntcDAud.sys 6.12.0.3047
Speakers show sound coming from internal speakers.
Speakers and Headphones Properties show- No Tone Control installed–how do I get it?
I have updated, deleted, and reinstalled drivers, from HP support help, no luck.
Please Help!
Thanks
CJ

Hi,
Please use the following instructions to check and fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problems mounting ISOs on Windows Vista SP2

I've been trying for the last few days to try to mount and ISO through Daemon Tools and Magic Disc to try to run a setup of a game. However, whenever I get into the autorun of the disc and click the setup button, all I get is a command prompt line for a split second and then nothing. I've tried mounting this disc on my PC running Windows Vista and it installed perfectly, no trouble at all. It also seems like Daemon Tools on my Mac is breaking some of the files, because on my MBP I noticed that some of the pictures are corrupt, but when I run it on my PC those pictures are fine and it's the same ISO file!
Does anyone know a remedy for this? I'm running Windows Vista SP2 on a 17" MBP Unibody 2.8GHz. Thank you!

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

I have Dreamweaver CS3 on a PC with Windows Vista SP2. The program recently began to hang when opening previously created HTML files. How do I fix this?

I have Dreamweaver CS3 on a PC with Windows Vista SP2. The program recently began to hang when opening previously created HTML files. How do I fix this?

Hi rmarchione,
Can you try restoring preferences and let us know if it helps?
Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6
Thanks,
Preran

Poblem connecting CISCO anyconnect secure mobility client ver. 3.1.04 versus Windows VISTA SP2: Login denied

Hi,
Suddenly I have this error with my client cisco AnnyConnect ver. 3.1.04063 connecting with my computer:windows vista SP2.
Message appeared: "Login denied. "name_company" security policies have rejected your login" and nothing else.
I tried to uninstall and reinstall the client annyconect ver.3.1.04063 but not success, the same message, I think it's a problem with my computer because my user id with other computer colleagues runs ok and I can authenticate perfectly.
Few days ago and always I have worked without problems then I don't know what happens...perhaps an automatically update of windows vista¿?
Anyone of you with similar issue or problem?
Thanks in advance.

I have another computer with windows 8.1 and Cisco VPN Anyconnect version 3.1 works fine ! what is wrong with this computer. After a little bit of research I realised that this issue is from cisco hostscan. Interesting enough comp A(computer A) where vpn client works does not have cisco host csan folder in program files (x86). On this computer I did saw that folder and deleted it.
I found the following information
C:\Users\<user>\AppData\Local\Cisco\Cisco HostScan\lib has some sort of .libs for various antivirus.... I have AVG Antivirus 2015 and Spy Bot ...
I have attached log files, if anybody wants to investigate then you are more than happy to investigate. Happy to be of help in case if you need any further input.
Tired of breaking my head...

CS-15 and Windows Vista SP2

Hi,
I´m wondering if it is possible to connect to internet with the CS-15 usb modem when I´m using Windows Vista SP2? It hasn´t been any problem when installing the modem and it gets contact with the 3G net too.
The problem is that I can´t connect to internet. When I´m trying I get the message "No available connection profile". When I go to options/settings/connections in the Nokia Internet Modem software there is the same "No available connection profile" message too. If I try to create a new profile I get the message: "The name is invalid: (connection name)"
I have tried every possible solution I have thought of and that I have find on different forums on Internet with no result. When I tried the modem on my parents computer with Windows 7 it worked just fine!
Because of all this I think that the CS-15 modem isn´t compatible with Windows Vista SP2. Does someone now if this is the case, and is there any update available to get it working with Windows Vista SP2? I have to get a solution soon because i just trying the modem out, and if I don´t get it working within a few days I have to return the modem back to the seller.
Thanks,
Moffa

Thanks for the head's up Walter.
Do we have any idea when 7 will be released?
Secondly, is there any known workaround? I've found some of the web that extended the FileSystemView, but when I attempted one of them, it kept *.lnk files from appearing the Drop Down menu, but if I clicked on one in the window of the chooser, it broke with the same error.
The only reason I ask for a work around, is my employeer is not the fastest about updating the JRE allowed on the network/machines, so I may be stuck with 1.6.0_22(b02) for a while.
Again, thanks for the guidance.

Hp pavilion elite e9140f pc windows vista 64-bit media smart dvd definitation file lost error

I have a hp pavilion elite e9140f windows vista 64-bit
My computer will no longer play blu-ray dvd's. I have attempted to update with Cyberlink DVD.
When asked to remove Media Smart Dvd and error comes up, Media Smart DVD difinitation file lost.
Media Smart DVD can't be removed with with error,
any suggestions to get past this point?
Help and Thanks

Hello BRDGDD,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues using your Blu-Ray Player on your HP Pavilion Elite e9140f running Windows Vista. I am going to approach this from a couple different directions.
First, we are going to try to put back the original drivers that came with your computer using the HP Support document: Performing a Software Application or Driver Recovery (Windows Vista), which will walk you though using the HP Recovery Manager to restore the original drivers on your computer.
Second, if you are still not able to use the Blu-Ray Player we are going to try using the HP Support document: Using Microsoft System Restore (Windows Vista), which we will use to roll your system back to a point in time where your Blu-Ray player worked. This will not affect your personal files, but it will affect any applications you have installed between now and the date you choose and any settings you have changed during the same time. These will have to be re-installed and/or re-changed.
Lastly, if you are still not able to install the software or are still not able to use your Blu-Ray Player I am going to suggest you back up any personal files, bookmarks and such to a USB drive or something and then follow the HP Support document: Performing an HP System Recovery (Windows Vista), which will walk you through recoverying your computer back to factory settings.
***NOTE: Be warned you will loose everything so ensure you backup what you want to keep!
If none of the above work and your still having issues it appears to be a physical issue and I think it would be best if you contacted HP technical support for repair options.
US support link to contact options for HP products purchased in the US.
Outside of US support link to contact options for HP products purchased outside the US.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

3000Q 100 and Windows Vista SP2

Recently I installed Windows Vista SP2 on my 3000Q 100 desktop. However, after the installation there was an error at bootup.
0162 Configuration Error. Press F1 to change settings or F2 to use previous settings.
Pressing F2 allows me to enter into Vista, but the date will be reset to 1 January 2006 12.00 am. It is not pleasant having to change the date everytime I boot up.
I wanted to do a system restore, but I don't know how I managed to erase the system restore file before installing SP2. So system restore is not possible.
I uninstalled SP2, and now I have a new error:
098: Unauthorized change in BIOS detected. Press F1 to change settings or F2 to use previous settings.
Similarly, F2 allows me to go back to windows, but then the date resets again!
Anyone can help?

Thanks for the head's up Walter.
Do we have any idea when 7 will be released?
Secondly, is there any known workaround? I've found some of the web that extended the FileSystemView, but when I attempted one of them, it kept *.lnk files from appearing the Drop Down menu, but if I clicked on one in the window of the chooser, it broke with the same error.
The only reason I ask for a work around, is my employeer is not the fastest about updating the JRE allowed on the network/machines, so I may be stuck with 1.6.0_22(b02) for a while.
Again, thanks for the guidance.

No audio device installed after windows vista sp2 update

Ok I will try to be as thorough as possible because I want to fix this problem and I hope somebody can help me.
So A few days ago There was an update for my audio driver so I accepted.
But after this update my sound worked but on next use the sound was gone.
So......I used system restore but no help the same thing happened
I went to the hp website to look up my audio driver for my model which was conexant audio 221
After download the driver wouldnt let me install it. I go to check in device manger to install it manually and the sound section is gone literally so i cant reformat or reinstall or anything 0.0
Somebody told me I need to upgrade to windows vista x64 sp2 which was in windows update.
So i tried it and still the same crap
I cant install the sound driver because there is no place in the device manager to install it to
I just get a message saying device installation failed device not found
i dont know what to do
My laptop is a hp dv2700 special edition notebook
Ive had it for a year no problems and this is the first major problem I've had ..............HELP
Past audio driver was conexant : Conexant High-Definition SmartAudio 221 Driver
Ive tried reading through support forums but you have to understand THE SOUND VIDEO GAME CONTROLS SECTION IN DEVICE MANAGER IS GONE
when i go into the programs I find my audio devices which are conexant hd audio and conexant hd audio soft fax modem with smart cp but when I click on them nothing happens

hi, im also exp. the same <text deleted> problem! i also get that error message "quick touch on screen display has stopped working" , lower right corner(volume icon)says"no audio output device is installed", no "video,sound & controllers" on device manager, i had tried reformatting, multible virus\malware scanners, ive tried multible registry cleaners, DL updated drivers, bios, audio(can't install,no audio device),and ive tried all of these conbinations with or without the windows updates, besides the audio prob, the cd/dvd icon's gone frm My comp, cant use the mic, and or webcam, SMART is detecting a hard disk failure now(iminent 2 fail) <text deleted> !,lol... ps HP or Microsoft really needs 2 take this into consideration, im tired of this, i will never buy another HP ever!! or windows!, **bleep** it if i have 2 spent another thousand dollars on a Mac,atleast ill get a much decent,"working" pc, that wontstress the **bleep** out of my mind!
Message Edited by WendyM on 08-09-2009 07:35 PM

HP Pavilion dv6-6b56er and Windows 7 x64 Professional

Hello.
I've purchased Pavilion dv6-6b56er with pre-installed Win7 x64 Basic, which is not convenient for me, because of it's lack in functionality. So I've made a full backup of pavilion's hard drives and deleted all software from it. Then I've installed Win 7 x64 Pro and confronted with some difficulties regarding drivers for USB 3.0. Everything else is working fine. I know, that HP do not responsible for any experiments with non-pre-installed software, but still I have some questions.
First of all, which driver I should install for pavilion's USB 3.0 ports? At downloads page I've found three different options:
1. Renesas.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99763-1&cc=us&dlc=en&lc=en&...
2. NEC.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100224-1&cc=us&dlc=en&lc=en...
3. Fresco.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102204-1&cc=us&dlc=en&lc=en...
and
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100237-1&cc=us&dlc=en&lc=en...
The first two have been installed (I mean they CAN be installed), the third one - doesn't install at all. So what's the reason of putting it on download page?
The more the merrier. When you try to install package with NEC driver, installation master tells you, that it's Renesas driver. So there is no NEC driver on the download page at all. Why I've payed so much attention to it? I've installed Everest, so I can find out what driver is needed. It tells me that I have "NEC uPD720200 USB 3.0 Host Controller". So, there is no available driver on download page for NEC chipset and we have NEC chipset inside.
Meanwhile Windows' Support center offered some NEC driver for USB 3.0 (http://ftp.hp.com/pub/softpaq/sp47501-48000/sp47677.exe ).
So, who is right?
The second question. If try to connect to USB 3.0 port some compound device (usb hub for example), then in "devices and printers" appear strange devices with label "No data". If Renesas driver has been installed then "USB 2.0 hub" appeared, and if Windows' proposed NEC - then "NEC Electronics USB Hub". The count of strange devices depend on number of devices connected to this compound device. This is my main problem - these strange devices.
So I came to the deadlock. Any ideas to solve this problem?
Any replies will be much appreciated.
PS. Sorry for my bad English.
This question was solved.
View Solution.

Is the following image what you see when you start the recovery manager with the disk? This is for the CyberLink type Recovery Manager within Windows. The windows for the external recovery manager should be similar. I will use the external Recovery Manager on my loaner dv7 notebook and post an image later on today.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I need Ralink Motorola BC8 Bluetooth 3.0+HS Adapter(or Any other Bluetooth driver which is compatible with HP Pavilion DV6-6119tx) for Windows 8 Enterprise 64 bit.

It is my humble request to help me about below issue:
I have HP PAVILION DV6-6119tx Notebook PC with Windows 7 ultimate 64 bit but
now I have upgrade to Windwos 8 Enterprise 64 bit than my Ralink Motorola BC8 Bluetooth 3.0+HS Adapter did not work in Windows 8 Enterprise 64 bit.
I have tried many times with difference way to fix this problem but
still I am unable to get it. So please help me to solve my problem.
I really need Compatible Bluetooth driver for my Notebook PC to run on Windows 8 Enterprise 64 bit.
(or Any other Bluetooth driver which is compatible with HP Pavilion DV6-6119tx to run on Windows 8 64 bit)

Hi,
Did you mean this version?
Ralink Motorola BC8 Bluetooth HS Adapter
Version 3
http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductDetailsViewer?Type=Software&Name=Ralink+Motorola+BC8+Bluetooth+HS+Adapter&ModelOrVersion=3&Vendor=Motorola&Locale=1031%2C1033%2C1042%2C1043%2C1046%2C2057%2C3081%2C4105%2C16393&LastSearchTerm=Ralink%2BMotorola%2BBluetooth%2B%252bHS%2B%2BAdapter%2B&BreadcrumbPath=Ralink+Motorola+Bluetooth+%2BHS++Adapter+&TempOsid=Windows+8
According to this site, this version of Bluetooth adapter is compatible with Windows 8, so it's related to driver. Please try to remove the driver in device manager and restart the computer to reinstall to see what's going on.
Download this driver and install this in compatible mode:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?lang=en&cc=US&swItem=ob_92786_1
To known if this issue is caused by failing to load driver, i suggest we disable fast boot to check the results:
How to Turn "Fast Startup" On or Off for a Hybrid Boot in Windows 8 and 8.1
http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html
For further help, please upload the event log here for research.
Please understand that if we finally fail to get this done, we have to wait for the driver update from manufacturer.
Kate Li
TechNet Community Support

Windows Vista SP2 crashes Creative Console Launcher.

I've erased my harddisc and reinstalled Windows Vista Home Premium SP x64 and then upgrade it to the new SP2. After I've installed the updated driver to my Soundblaster X-fi Extrememusic and the updated softwares it crashes the Creative Console Launcher. This is what happens: I open the Creative Console Launcher and then I go to the Graphic Equalizer to change the EQ. After I have done that, I got a message like this: "Creative Console Launcher has stopped working and Windows must close it down". Is there any solutions for my problem
hockey

I had a similar problem when installing Vista sp 2. What I did was remove all creative drivers and programs and reinstalled Daniel K.'s X-FI 2.0 package. My console launcher did the exact same thing, but I was using Creative's newest Console Launcher. When I reinstalled everything (which is included in the package) everything worked really well.
I sometimes switch between drivers included in Dan K.'s pack and the package with a final overlay of the newest Creative Labs driver.
here is a link: Dan K 2.0 X-FI inclusi've driver pack/update
Cheers,
jmacguire

HP Pavilion dv6 1133-ea Windows Vista SP2

Similar Messages

Maybe you are looking for