HP Pavilion dv6 1334us won't start after windows update, stuck in Error Recovery

My computer is an HP Pavilion dv6 1334us with 32bit-windows 7. The computer did automatic updates and when it started up said there was another one avaliable through WIndows Updater. I installed the update and it said the computer needed to restart for the update to take effect. I choose to restart and the computer wouldn't boot back up, it boots to the 'Windows Error Recovery' screen where my options are 'Launch Startup Repair (recommended)' and 'Start Windows Normally'. When I select the repair, it says it loads windows files, then goes back to the error recovery screen. When I choose to start normally, it freezes the second it trys to start, flashes a blue screen and then returns to the Error Recovery page again.

Please follow the steps in the following document to troubleshoot and fix the boot issue that you are facing.
Overview of Troubleshooting Startup Problems (Windows 7, Vista, XP): http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443371&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Please let me know the results so that I can try helping you further. Thank you.
!-------------------Please click the white star in the blue box to give KUDOS if this answer was helpful or clarified your question or issue.
If my answer solved the issue, then please click on the Accept as solution button. Thank you-----------------------------------------------------------------!
I am an HP Employee but I am not speaking on behalf of HP. The opinions and views that I express here are my own.

Similar Messages

Firefox won't start after windows update

After windows Updated my computer Firefox won't start. I tried a clean reinstall two times, won't work. When I tried to start the firefox the first time after booting my computer it comes with the following message.
XML Parsing Error: undefined entity
Location: chrome://mozapps/content/extensions/update.xul
Line Number 14, Column 1:
<wizard id="updateWizard"
^
Any Help would be greatly appreciated. I like firefox and I'm using it the last 7 Years.
Thanks
DK

I cheated a little bit and put the issue url in a working version of firefox:
chrome://mozapps/content/extensions/update.xul
What I got was a page that looked like this below and console:
blah blah parser:
<pre><nowiki> xml-stylesheet
xml-stylesheet
<wizard id="updateWizard" xmlns="http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul" title="Firefox Update" windowtype="Addons:Compatibility" branded="true" onload="gUpdateWizard.init();" onwizardfinish="gUpdateWizard.onWizardFinish();" onwizardcancel="return gUpdateWizard.onWizardCancel();" onclose="return gUpdateWizard.onWizardClose(event);" buttons="accept,cancel" pagestep="1" currentpageid="dummy" firstpage="true" lastpage="true">
<script type="application/javascript" src="chrome://mozapps/content/extensions/update.js"></script>
<stringbundleset id="updateSet">
<stringbundle id="brandStrings" src="chrome://branding/locale/brand.properties"></stringbundle>
<stringbundle id="updateStrings" src="chrome://mozapps/locale/extensions/update.properties"></stringbundle>
</stringbundleset>
<wizardpage id="dummy" pageid="dummy"></wizardpage>
<wizardpage id="offline" pageid="offline" next="versioninfo" label="Firefox is working offline" onpageadvanced="return gOfflinePage.onPageAdvanced();">
<description></description>
<checkbox id="toggleOffline" checked="true" label="Go online now." accesskey="G" oncommand="gOfflinePage.toggleOffline();"></checkbox>
</wizardpage>
<wizardpage id="versioninfo" pageid="versioninfo" next="mismatch" label="Checking Compatibility of Add-ons" onpageshow="gVersionInfoPage.onPageShow();">
<label>
Checking your add-ons for compatibility with this
</label>
<separator class="thin"></separator>
<progressmeter id="versioninfo.progress" mode="undetermined"></progressmeter>
<hbox align="center">
<image id="versioninfo.throbber" class="throbber"></image>
<label id="versioninfo.status" flex="1" crop="right"></label>
</hbox>
<separator></separator>
</wizardpage>
<wizardpage id="mismatch" pageid="mismatch" next="checking" label="Incompatible Add-ons" onpageshow="gMismatchPage.onPageShow();">
<label></label>
<separator class="thin"></separator>
<listbox id="mismatch.incompatible" flex="1"></listbox>
<separator class="thin"></separator>
<label>
Firefox can check if there are compatible versions…
</label>
</wizardpage>
<wizardpage id="checking" pageid="checking" next="noupdates" label="Checking for Compatible Add-ons" onpageshow="gUpdatePage.onPageShow();">
<label></label>
<separator class="thin"></separator>
<progressmeter id="checking.progress"></progressmeter>
<hbox align="center"></hbox>
</wizardpage>
<wizardpage id="noupdates" pageid="noupdates" label="No Compatible Add-ons Found" onpageshow="gNoUpdatesPage.onPageShow();">
<description></description>
<separator class="thin"></separator>
<hbox id="updateCheckErrorNotFound" class="alertBox" hidden="true" align="top"></hbox>
<separator class="thin"></separator>
<description id="noupdatesCheckEnabled" hidden="true"></description>
<vbox id="noupdatesCheckDisabled" hidden="true"></vbox>
<separator flex="1"></separator>
<label></label>
<separator class="thin"></separator>
</wizardpage>
</nowiki></pre>
I do not see much about coloum 14, but I am guessing this file is stored somewhere and its corrupt. Update.xul suggests that it is the update file. Do you still have this in your downloads folder? There are two places for update and for a clean reinstall:
[http://www.mozilla.org/en-US/firefox/new/] in a private window will give you a new install or you can choose from here: [https://www.mozilla.org/en-US/firefox/all/]
This is what the file should look like; [http://hg.mozilla.org/mozilla-central/log/7a2edc5171e6/toolkit/mozapps/extensions/content/update.xul] If you can copy and paste that file from a working browser we can see the issue, but it will just look the same as the error.
if you can replace the contents of the file locally with what it should look like it will fix the error, but who knows if there are other errors. May be best to delete the updater and save all the profile folder contents.

Firefox won't start after an update. Firefox help says check virtualization settings. What is virtualization settings and where do you check them and for what? I have Windows XP

Firefox won't start after downloading update. I've reinstalled Firefox, still won't start. Help says check virtualization settings. What and where are virtualization settings? I have Windows XP.

This might be Zone Alarm since it provides virtualization. Please try the instructions to turn off virtualization in the following support question
http://support.mozilla.com/en-US/questions/880170

Blackberry 9220 won't start after os update

My blackberry 9220 was perfectly working for the past 8months, after finding out that there's a new update for os, i tried updating mine. I fell asleep while updating my os thy i didnt notice if the os was successfully updated bt wen i woke up at the middle of the night, my phobe won't start. When i tried charging it, the red led light lights up then the initial screen where you see the blackberry word and load bar below it starts bt only flashes and turns off. It keeps repeating. I tried going to a phone technician but they said they cannot reformat my phone because it doesn't turn on or completely turn on in the first place.. What should i do? Please help me.

Hi and Welcome to the Community!
You may need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Apps won't start after latest update?

Hello,
I'm on an older 2006 iMac (the one without the black border) and I installed the latest update last night. Now I can't get Firefox, Safari, Mail or apps working properly. When I try to start an app it bounces up and down and then I can't remember what it says but it won't start. Any ideas how to fix this? I'm thinking of downloading Firefox and Safari on my sister's computer and then transferring them via my memory stick.
I also tried a restart. Last night I just shut it down and walked away and figured I'd deal with it when I get home from work today.

Hi, first I hope you have your important stuff backed up!!?
I would & always do Repair Permissions Before & after Updates, so I would try the RP ..
Then I would go the SMC route, specific for your model..
If after that you still have "issues" You may need to go the Archive & Install route..
Links:-
http://kb.iu.edu/data/aoxn.html
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1710
Hope this Helps.....L

Macbook won't start after recent update

Hi Guys,
Got a problem with a month old Macbook. Clicked for the recent updates and after it restarting the Macbook won't start up past the Apple logo and the rotating symbol beneath it.
Any ideas ? Thanks in advance
Nick

Hi Nick,
Check out these two articles:
http://support.apple.com/kb/TS1541 (Mac OS X 10.5: Troubleshooting installation, startup, and login issues)
http://support.apple.com/kb/HT2956 (Troubleshooting Mac OS X installation from CD or DVD)
Running Disk Utility and trying to verify the startup volume or starting up in Safe Mode would probably be the next best course of action.

X301 won't start after BIOS update

Hi all:
Well I've had my new x301 for about 2 months and it's given me nothing but troubles....Recently I found out my laptop won't come back on from hibernation (when you close the screen and open it up). So I downloaded and installed the lastest updates from Lenovo (including the recent BIOS update), restart computer, only to find out it doesn't start up anymore...black screen, thinkadvantage blue botton doesn't light up, no harddrive activity, only light on is battery and power...
I'm thinking maybe something went wrong with the BIOS update. Is there anything I can do to fix it (besides shipping this thing to a repair center which is a big hassle, or paying $200 for an on-site tech that might or might not solve the problem).
Any help is appreciated.

Hello all
I just updated my X301 (2776LEG) with the 3.12-1.05 bios. Now my laptop won't start up when running on battery, it powers on for a short while and powers off again. This cycling keeps on going (after 30min I switched it off!) but as soon as i connect the power adapter it boots fine. Seems like this bios update f****ed up the battery power part of the computer....
I tried the bios battery trick but it only worked on the first boot and after that the same problem is present.
I have added 2gigs extra memory and a ultrabay battery and it has been working 100% for about a year now. This error started right after the bios update...
Thought that a reflash of the bios would solve the problem but i cannot reflash the bios with the same bios version...
Any ideas ?
Kind regards
Tommy

MBP won't start after failed update

my mbp wont start after shutting down during the latest RAW photo update. the update completely failed and now the computer won't boot anything. i could hear the hard drive try to start over and over but never get anywhere, so i inserted the leopard cd. the computer wont even boot from the disk at this point; all i hear is the optical drive making the same, start-up, squeaking sound again and again until i finally hold power for 5 seconds and shut it off.
i have a mbp from summer 2007.

Press the Power Button and immediately press and hold down the Command and the S keys as the machine starts up. This boots you into Single-user mode and you should see white text appear on the screen.
When you see the # Command prompt, type /sbin/fsck-fy and hit the Return.
Now sit back & let your computer do its thing. This should take approximately 15 minutes or so. Depending on how messed up your computer is. Just be patient.
If and when you see the message File System was modified repeat the steps above again & again until you hopefully see the message no problems were found." When that happens type reboot and hit Return again.
If these steps do not work then boot from your install disc to repair disk. I believe you already tried this.
To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Your random question, only Apple can answer that for you. Ask them and back up before you bring in your computer to the Apple store just in case.

My MacBook won't start after iTunes update. I keep getting the spinning wheel. Any suggestions?

While trying to back up my iPhone 4S to iTunes, I received a message that iTunes had to be upgraded. I did the upgrade, but my computer won't start now. I get a white screen with the spinning wheel. (Like the computer is trying to boot). Any fixes?

AppleStar wrote:
Please verify you got this screen as well:
I had the same after updating fronm 10.7.1 to 10.7.2 tonight. Not even a re-install of the OS X 10.7 and Combo update to 10.7.2 helped. I think this time Apple messed up big time with the 10.7.2 update and some Mac Books (my case: MacBook 15" Mid 2009 = MacBookPro5,3)
If any Apple Support person reads this: Please get in contact with me. This is highly unusual!!
I think the best thing would be to call AppleCare 1-800-MY-APPLE.

Nokia 700 - won't start after FP1 update (112.some...

Just checked for updates today and I had a new OTA update available, yay! So I thought, "Finally, FP1 is here!" Here's what happened afterwards:
I charged my 700, created a back-up (never forget this step chaps), restarted it, took a deep breath, enabled Wi-Fi and let it update itself.
So first step went fine, it downloaded the update. Second, it rebooted and started loading the update files while displaying "Updating..." Next, it switched the label to a coups of gears and continued filling the progress bar. And then - the moment of truth - reboot.
Started initialising normally, then showed NOKIA logo, started the "Loading" animation with the five dots and... that was it. It keeps resetting while at the dots animation. After several tries it just gave up and remained blank. Waited some time and decided to wake it up - same scenario: starts init, several reboots, goes back to off.
Is it that the OTA SW updated screwed up my device? Really hope not!
Any words of advice from the community here before I go yell at somebody at one of my carrier's offices tomorrow morning?
Cheers!

Brief update - turns the phone is not "bricked" at all, problem is my SIM card.
It's ancient honestly but should that render the phone useless?
In short - tried booting without SIM at all - works OK. Tried with relatively recent SIM - OK. When tried with my old SIM (think I got it as a replacement to an even older price back in 1999 or 2000) - boom! Won't power up (keeps rebooting till it gives up at some point).
Although I'll easily remedy it by getting a new chip in the morning, I was wondering - is Belle FP1 not supporting old SIM cards?

Hp compaq 6510b won't start after BIOS update

hello
when I power on my laptop HP compaq 6510b it DISPLAYS this message :your bios failed to complete the update 6510b.after flashing the bios the laptop won't start .it displays the same message (your bios failed to complete the update 6510b) and turns off.I can't access the bios by pressing F10.the bios version was F16 and flash it by F20 .need help thank u very much.
This question was solved.
View Solution.

I extracted BIOS softpaq sp55553. It is BIOS version F.20. It had the .SIG file inside when extracted using WinZip. You do not need to make a bootable usb flashdrive. Just put the files at the root of a FAT32 formatted usb thumbdrive, plug it into a usb 2.0 port. Hold the Win + B keys down and press the power button. Continue holding the keys down until the notebook reacts. It usually takes a bit longer than 15 seconds to respond and begin the BIOS recovery.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

MOVED: Comp won't start after BIOS Update

This topic has been moved to BIOS.
https://forum-en.msi.com/index.php?topic=118639.0

Hello all
I just updated my X301 (2776LEG) with the 3.12-1.05 bios. Now my laptop won't start up when running on battery, it powers on for a short while and powers off again. This cycling keeps on going (after 30min I switched it off!) but as soon as i connect the power adapter it boots fine. Seems like this bios update f****ed up the battery power part of the computer....
I tried the bios battery trick but it only worked on the first boot and after that the same problem is present.
I have added 2gigs extra memory and a ultrabay battery and it has been working 100% for about a year now. This error started right after the bios update...
Thought that a reflash of the bios would solve the problem but i cannot reflash the bios with the same bios version...
Any ideas ?
Kind regards
Tommy

VMware player won't start after kernel update

Hi,
today I've updated to 3.9.6-1 kernel and all went good. So I wanted to start my vmware player to start a vm. Of course I've done the needed steps in the vmplayer wiki page to setup the new headers and stuff after kernel update for vmplayer. Also I've ran "vmware-patch -f" and ran trough. But still get an error when I wanted to start the player in the "/tmp/vmware-root/vmware-modconfig-11986.log":
2013-06-16T13:03:51.680+01:00| vthread-3| I120: Log for VMware Workstation pid=11986 version=9.0.2 build=build-1031769 option=Release
2013-06-16T13:03:51.680+01:00| vthread-3| I120: The process is 64-bit.
2013-06-16T13:03:51.680+01:00| vthread-3| I120: Host codepage=UTF-8 encoding=UTF-8
2013-06-16T13:03:51.680+01:00| vthread-3| I120: Host is Linux 3.9.6-1-ARCH 2013.04.01
2013-06-16T13:03:51.680+01:00| vthread-3| I120: Msg_Reset:
2013-06-16T13:03:51.680+01:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": No such file or directory.
2013-06-16T13:03:51.680+01:00| vthread-3| I120: ----------------------------------------
2013-06-16T13:03:51.680+01:00| vthread-3| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
2013-06-16T13:03:51.680+01:00| vthread-3| I120: Msg_Reset:
2013-06-16T13:03:51.680+01:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/config": No such file or directory.
2013-06-16T13:03:51.680+01:00| vthread-3| I120: ----------------------------------------
2013-06-16T13:03:51.680+01:00| vthread-3| I120: PREF Optional preferences file not found at /root/.vmware/config. Using default values.
2013-06-16T13:03:51.680+01:00| vthread-3| I120: Msg_Reset:
2013-06-16T13:03:51.680+01:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/preferences": No such file or directory.
2013-06-16T13:03:51.680+01:00| vthread-3| I120: ----------------------------------------
2013-06-16T13:03:51.680+01:00| vthread-3| I120: PREF Failed to load user preferences.
2013-06-16T13:03:51.680+01:00| vthread-3| W110: Logging to /tmp/vmware-root/vmware-modconfig-11986.log
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Reading in info for the vmmon module.
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Reading in info for the vmnet module.
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Reading in info for the vmblock module.
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Reading in info for the vmci module.
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Reading in info for the vsock module.
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Setting vsock to depend on vmci.
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Created new pathsHash.
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Invoking modinfo on "vmmon".
2013-06-16T13:03:51.689+01:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2013-06-16T13:03:51.689+01:00| vthread-3| I120: Invoking modinfo on "vmnet".
2013-06-16T13:03:51.690+01:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2013-06-16T13:03:51.690+01:00| vthread-3| I120: Invoking modinfo on "vmblock".
2013-06-16T13:03:51.691+01:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2013-06-16T13:03:51.691+01:00| vthread-3| I120: Invoking modinfo on "vmci".
2013-06-16T13:03:51.693+01:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2013-06-16T13:03:51.693+01:00| vthread-3| I120: Invoking modinfo on "vsock".
2013-06-16T13:03:51.696+01:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
Maybe it has something to do with the last filesystem update?
But I don't know what to do really and couldn't found anything on that.
thanks

sorry, found something now in another thread here. this fix works just fyi:
kokoko3k wrote:
Quick and dirty workaround to fully update your system
sudo pacman -Suy #update everything
sudo mkdir -p /usr/local/lib/gtkmm && cd /usr/local/lib/gtkmm
sudo wget http://arm.konnichi.com/2013/01/05/extra/os/x86_64/gtkmm-2.24.2-2-x86_64.pkg.tar.xz
#sudo wget http://arm.konnichi.com/2013/01/05/extra/os/i686/gtkmm-2.24.2-2-i686.pkg.tar.xz #The bug affects i686 too.
sudo tar -xvf ./gtkmm-2.24.2-2-x86_64.pkg.tar.xz
#sudo tar -xvf ./gtkmm-2.24.2-2-i686.pkg.tar.xz #The bug affects i686 too.
LD_LIBRARY_PATH=/usr/local/lib/gtkmm/usr/lib/ vmplayer #start it with old libraries

Lenovo s500 ideapad won't start after windows 8.1 upgrade

Hello, our school is lending us a lenovo notebook to use in school for work.
I tried to upgrade the computer from windows 8 to windows 8.1.
After the update the computer it gives me a blackscreen on startup and after a restart it restores to windows 8.

I have the same problem with my S500
Lenovo and Microsoft both have no idea how to fix this.
Both said we just have to use 8 . But i really like to use 8 to the fullest, so I want to upgrade to 8.1

HP Pavilion 15-n268sa will not boot after windows update (windows 8.1)

After a series of windows update (windows 8.1) my HP Pavilion 15-n268sa will not boot up, no fan noises, no lights no nothing.
I have tried a "hard reset" a number of times with no success.
When the battery is present the white LED flashes 3 times when the power button is pressed.
Please please help.

Hello Cuffy,
Welcome to the HP Forums!
I understand you notebook will not boot after a series of Windows updates.
Can you tell me if you are able to access the HP Recovery Manager by repeatedly tapping the F11 key while the notebook turns on? If you can access this, try doing a system restore to before you installed the updates. If not I would suggest you go through this document: Computer Does Not Start and the LEDs Blink or the Computer Beeps.
If it's the Caps Lock light that is blinking this document will tell you exactly what the error is (spoiler: 3 beeps is a memory failure). This could also explain the failed updates. The updates are stored in the RAM before being applied to the operating system.
You can try reseating the RAM, or using only 1 of the RAM cards, as you have 2x4GB cards. If it still doesn't work with 1 card, try the other card to confirm it has failed.
You can replace defective cards via HP Phone Support if covered under warranty or at the HP Part Store if not covered. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
Hopefully this information helps!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

HP Pavilion dv6 1334us won't start after windows update, stuck in Error Recovery

Similar Messages

Maybe you are looking for