HP Pavilion dv6-1355dx not turning on using AC power supply.

1. Product Name and Number:
    VM222UA#ABA "HP Pavilion dv6-1355dx"
2. Operating System installed (if applicable):
     Windows 7 64bit
3. Error message (if any):
     Dose not turn-on  on AC power or charge the battery
4. Any changes made to your system before the issue occurred:
    None
Summary of the poroblem:
Facts:
1) The laptop works perfectly fine using the battery.
2) The battery dose not charge using the AC adapter that came with the laptop.
3) The battery dose not charge when the laptop is turned on or off.
4) No chaging light turns on when pluged into AC.
5) When the battery is pluged into the battery slot on the laptop, the white AC power led on the dc jack turns off.
6)The very second I remove the battery from the computer, the white AC power led on the dc jack turns back on!
7) With the battery removed and the AC power supply pluged into the laptop, the laptop won't turn on, and the white AC power led on the dc jack remains on.
Tests done:
1) Used another adapter with the laptop, but had the same problem.
2) Used different battery, but had the same problem.
Interesting fact:
When the battery is completly drained out, the white AC power led on the dc jack turns on, but I still cannot turn on the laptop on AC power supply.
Note:
I Have a multimeter that I want to use to test the power supply and charging circuit on the motherboard, but I don't have a schamatics of the mother board, so I am stuck.
Any suggestions from the HP community would be appriciated. Thanks.

The laptop has a modular DC jack that plugs into the motherboard with a cable and does not require soldering. The first thing to try is a replacement of that jack. Here is the Service Manual:
Manual
You need this part:
Power connector cable 533465-001
http://www.ebay.com/itm/DC-Power-Jack-w-CABLE-HP-PAVILION-DV6-1355DX-DV6-1030US-/140598729337?pt=Lap...
$7 on eBay, shipped.

Similar Messages

  • SOLVED: HP Pavilion dv6-1355dx Windows 7 Recovery Partition Failed, Windows Partition Formatted

    Hello everyone. I just joined the community, so I apologize in advance if I am in the wrong place or if I do not supply all the needed information about my computer and problem in this first post.
    I have an HP Pavilion dv6-1355dx Entertainment Notebook PC, which came with Windows 7 Home Edition, and an HP Recovery Partition. Today, I decided I wanted to start from scratch, as the system was getting pretty slow, and the User folders were becoming very unorganized. So I followed the instructions found at the HP website and used the program HP Recovery Manager. However, after the Recovery Partition formatted the Windows Partition, and had three minutes left to copy the files into the new partition, a message popped up declaring the recovery failed, and the computer had to be rebooted. So now I have a computer with no operating system on it at all, and the Recovery Partition continues to fail. I have used the Recovery Partition before, and this has never happened.
    Has anyone encountered or know of a similar issue? Does anyone know a solution? Am I out of luck, or is there someway to ask HP for a copy of the installation media?
    Thank you in advance.
    EDIT: Never mind. I found a forum post with my answer. Sorry to anyone who spent the time to read this post.

    how did yiu fix this problem 

  • I have pavilion dv6 sound not working hp provide new update idt stil not working

    HI .
    i have pavilion dv6 sound  not working hp provide new update idt stil not working

    Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
    Go to Control Panel,Programs & Features-Uninstall IDT software and restart the laptop.Next install using the downloaded file.
    ```````````````````````````````````````
    If still no sound,try a hard reset, works sometimes.Disconnect all external devices first.
    1-remove power cord and battery
    2-press power button for 30 seconds
    3-reinstall only power cord for first startup.
    4-power on
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Why is my built in webcam and mic on my hp pavilion dv6-6113cl not working?

    why is my  built in webcam and mic on my hp pavilion dv6-6113cl not working?

    Enter the device manager and verify that the webcam is present and has a driver installed.
    1) Test your webcam by using the YouCam software that was delivered with your notebook. (you should also be able to test it with MSN or Skype setup). You may have to uninstall it and then reinstall the software. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Apple iPAD 2.  Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment.  Can you help please?

    Apple iPAD 2.  Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment.  Can you help please?

    Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.  See if that clears the glitch.

  • HP pavilion dv6 microphone not working . help please . . .

    HP pavilion dv6 microphone not working . help please . . .

    Hi,
    DV6 is a series of hundreads of models, what is yours ? To help us answer question quicker, please read this:
       http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
    You may wat to try this first:
    1. Right click speaker icon (right hand corner)
    2. Select Microphone devices
    3. Right click Microphone
    4. Enable it
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hp pavilion dv6-1355dx USB Problem.

    Hello,
    I have an hp pavilion dv6-1355dx laptop computer. Recently my HDD crashed and i replaced it with a new one reinstalling Windows 7 64bit. Everything works great, besides my USB's. None of my USB ports work, and in my System devices > Universal Serial Bus Controllers it shows the yellow exclamation point under the multiple "Intel(R) ICH9 Family USB Universal Host Controller -####". I understand the USB support is based in the Chipset software and I have reinstalled this multiple times. This computer is running a T6600 Intel Core 2 Duo with Intel Series 4 Express Chipset. I have also tried to update driver software within device manager and it tells me my driver software is up to date. Does anyone have any insight about this? Below is a screencap of device manager.
    Thanks in advance.

    Hi, all! I might be bringing up a pretty old topic, but I've registered on this forum, because I've encountered similar problem. I googled and found quite a few people with the same question, some of them on this very forum as well.
    The solution provided here didnt work for me, and it took me a few hours to figure out why my controllers kept returning code 37. All usb ports were working fine up until i started updating windows 7 x64 drivers for the dv6-1326ss, downloading them from the official page. The reason why the problem occured was the accidantly installed AMD USB filter driver, so i followed the steps described here, manually deleted all the troubled lines in the divice manager, and rebooted. After the reboot, all of the drivers have succesfully installed from the windows update center, but something tells me, that reinstalling chipset driver would work just as well. Hope that helps somebody.

  • IPod will not turn off using click wheel

    My 30G iPod won't turn off unless I put it in the universal dock and use the remote. It will not turn off using the click wheel. I've tried resetting the iPod, and also changed the "Settings" back to the factory default, and that didn't make any difference. Is anyone else having this problem?

    Welcome to Apple Discussions!
    Does the iPod sucessfully reset?
    Try resetting the iPod...
    Resetting iPod
    After it resets, wait about a minute. Now try turning it off.
    Also, try activating the sleep timer on the iPod. Does that turn it off? (Go to extras-->clock-->[select a clock]-->sleep)
    btabz

  • Using ThinkPad Power Supply

    I have an S10 (and really like it a lot). The input states 20v 2.0A. I have a mess of power supplies lying around for TP R51 which output 16v 4.5A. Would it be ill-advised to use said power supply?
    Thanks.
    Solved!
    Go to Solution.

    Hi, not only have the S10e, ive own an TP X32 too , i try the psu it works  16V x 4,5 72W , 20V x 2A 40W
    ...when you accidently change the psu plugs...it cant be damaged your S10 is the quintessence...
     takes only the power that S10 needs...not what psu possible gaves output.....
    Greets KalvinKlein
    Message Edited by KalvinKlein on 02-27-2009 10:23 PM
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • Can I use the power supply of 4507R into 4507R+E?

    Can I use the power supply of 4507R into 4507R+E?
    I have two old 4507R with 1300W power supply,now I want to upgrade to 4507R+E,Can I use the power supply of 4507R into 4507R+E?

    According to this Q&A you can:
    Q.    Can I use the existing Cisco Catalyst 4500 power supplies in the E-Series chassis?
    A.     Yes.
    Link:
    http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/prod_qas0900aecd806d8b06.html
    HTH

  • Pavilion dv6 Webcam not working?

    I have a Pavilion dv6-1030ca notebook, and for the past few weeks, I've been having trouble with my webcam. When I open HP MediaSmart Webcam, I get the following error message: "No video device detected. Please plug a video device into your computer. If you are using an integrated camera please make sure it is turned on." I have an integrated camera, and it (usually) turns on when the webcam application opens. I am running Windows Vista with SP1, and have tried many things to fix it, to no avail. The webcam does not appear in Device Manager, under Imaging Devices nor any of the USB Root Hubs. So far, I have attempted to:
    - Reinstalled the USB Root Hub Drivers
    - Tried to fix the solution in BIOS (as another thread suggested)
    - Attempted to use Recovery Manager to reinstall the driver (was not in the list)
    - Created Recovery Disks to solve the problem (it didn't)
    - Upgraded the MediaSmart Webcam software
    I am in school right now, and I really can't afford to give my laptop away to get repaired for three weeks since I have exams coming up. Any help would be appreciated! Thanks!
    Message Edited by annabelle89 on 07-27-2009 08:30 PM
    Message Edited by annabelle89 on 07-27-2009 08:31 PM
    This question was solved.
    View Solution.

    I am in the exact boat as you.
    Couldn't understand why all of a sudden, after about 3 months, the webcam 'device not found' in Win7 Device Manager, Google Chat, Skype, etc.
    Called HP support, and they made us do a hard reset of the entire notebook, removing the battery, ac cord, and holding down the power button for 1 minute.
    Webcam came back for 1 day, but I'm not about to unplug and reset everytime I am in the middle of a skype call?!
    Sadly, HP or Costco (where it was purchased) doesn't seem to care or are willing to provide a solution.
    Instead of recalling the computers, like automobile and other industries, they just wait and hope that the warranty runs out before it becomes a big deal.
    They didn't stop selling them either, even with this known problem.
    So now they have the G series of notebooks, and so the dv6 and its headaches can fade away for HP.
    I have probably been involved with over 100 HP product purchases in my job the past 5 years, but this will be the last for the forseeable future.

  • HP pavilion dv6 fan not working

    My HP PAVILIONDV6T-6100 laptop (Product no. LM720AV) is having problems with the cooling fan and overheating. I have started getting the cooling fan not functioning error at startup. When I use the laptop-the cooling fan runs almost all the time. It turns-off when I have only one application running on the laptop.
    I understand that since the fan is running perfectly fine, the fan motor is still functional. Could it be dust accumulation that is causing the error and fan running continuously? Where can I get the insturctions for opening the cooling fan assembly and cleaning it? Also will I need to replace the thermal insulation after cleaning?
    Thanks
    Sunny

    I paid $30,000 for my car but I trust the dealer to work on it because I know their mechanics do it every day. I could watch youtube videos and figure out how to do a tuneup but they will do it better. I will change my own air filter however since it is not too hard and will save money. Replacing a cooling fan is more like a tuneup than replacing an air filter. Still, you can do it if you follow the Manual and are careful. Here is the Manual:
    Manual
    This is the part number for your fan and heatsink:
    641477-001
    $63 from HP:
    http://h20141.www2.hp.com/Hpparts/Search_Results.aspx?mscssid=11C544B95DEB4BC6A0D99C14917258C7&Searc...
    $20 on eBay:
    http://www.ebay.com/itm/New-OEM-HP-Pavilion-DV6-6000-DV7-6000-CPU-Fan-650797-001-641477-001-665309-0...
    I would go ahead and run all the diagnostic tests you can access by tapping F2 and entering UEFI Diagnostics. Other than the fan what other problems are you having?
    If this is "the Answer" please click "Accept as Solution" to help others find it.  

  • Hp pavilion dv6 audio not working

    product name: HP Pavilion dv6 Notebook PC
    Product number: A3L69EA#ABU
    no audio is working at all, not even when i use headphones, i have tried turning all volumes up and i have checked that the audio is enabled on the device manager, please help, thankyou

    Go to the link below.Enter your Product Number as listed on Service Tag. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&​lc=en
    Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop and install using the downloaded file.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Hp pavilion touchsmart will not turn on

    Hi, I have a hp pavilion touchsmart laptop. I used my computer the other day to save a file onto a flash drive and It was working fine. I haven't touched it since then yesterday morning I noticed it was off and wouldn't cut on so I figured it died and I plugged it up and let it sit on the couch to charger. When I went to pick it up and turn it on about an hour later it was very hot and wouldn't cut on. The light next to the charger port is orange when you first plug it in then turns white after a few mins. No other lights are on and nothing happens when I press the power button. I'm still under warranty but I would like to try and fix myself before I go through that long process. Please help thanks in advance.

    Hi @SKS_Paviliondv6 
    Welcome to the HP Support Forums!
    I understand that your notebook is stuck in a type of error loop, asking for a startup repair. I am happy to assist.
    Have you ever backed up whatever data there is on this notebook, or is there anything of value on it? If there is nothing of value, you can try restoring the factory image, assuming it will function.
    Performing an HP System Recovery (Windows 7)
    Troubleshooting HP System Recovery Problems (Windows 7)
    If on the other hand there is some data on there that you want to back up, then I would do that first. To assist with that you can use the service manual to help with removing the hard drive, and then you can use a compatible external drive bay, and connect that to another device to make a copy of the things you do not want to lose.
    HP Pavilion dv6 Entertainment PC - Maintenance and Service Guide
    Also you can refer to this page on various ways to back up that data.
    How to Recover Data from the Hard Drive of a Dead Laptop -wikihow.com
    If the recovery process fails as well, then it is likely a hardware issue of some sort. You can try looking at this page which offers some options for hardware testing, if you can access them.
    Testing for Hardware Failures (Windows 7, Vista)
    In my opinion, if the notebook is as old as you say, and if it comes down to a hardware problem, it is probably not worth fixing; but that also depends on the type of hardware failure. If it is something comparatively minor, and easily replaceable, then it may be worth doing; but if it involves a board or processor, then it is probably not worth doing at this point.
    I hope this helps.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Hp pavilion dv6-6c65sx not able to do recovery

    I have hp pavilion dv6-6c65sx A7P80EA#A2N . I decided to format my c drive and changed my active drive since then I can't do recovery for my laptop. other partitions of the drive are fine and I have preload folder with 17.6gb size and I dont know how to restore it. I tried to do recovery from the bios but there is an error with recovery path not able to restore it..
    Also I lost my recovery tools after I formatted my C drive.
    This question was solved.
    View Solution.

    Please mark the HP Recovery partition "Active" by selecting "Mark Partition as Active" using the Windows Disk Management Console. See HP - Partitioning and Naming Hard Drives (Windows 7) for information about using the Windows Disk Management Console.
    If the above instructions didn't work and you didn't create your HP Recovery Media when you first setup your computer, please contact official HP support in your region / country, via the HP Worldwide Support Portal, to see if HP Recovery Media is available for your computer.
    Alternatively, if you can still read the 25-digit Windows product key on the Microsoft COA affixed to your computer, you can install Windows 7 Home Premium using this key. Please see "How to Install Windows 7 Without the Disc" for instructions on how to download Windows 7, create the installation media, and install Windows 7 using the 25-digit product key from the Microsoft COA on your computer. This method will not install any HP customizations or value-added software and you will have to manually install all needed drivers from the HP Pavilion dv6-6c65sx Entertainment Notebook PC Drivers page.
    Links to Windows 7 SP1 can be found HERE and HERE.
    Direct link to Windows 7 USB/DVD Download tool.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Maybe you are looking for

  • Error during creation of database

    I am running oracle 8i on solaris 7.I already had a database up and running.Now i was trying to create another one.I created password file,Parameter file and also set the ORACLE_SID and connected with server manager and try to start the instance in n

  • How To Search For a Specific File name?

    Hello Everybody How To Search For a File Like NewFile.txt in a Root Like C:\\ And If The File Is Found Open It And Write In It?

  • Missing images and CSS styles! [subject edited by moderator]

    I edited a template in dreamweaver and uploaded it to my new website yet it only shows plain text? All of the pretty layout and pictures are missing? How do I upload all of the files the way that it looks in dreamweaver? Because there it looks perfec

  • Picking the records from IT2011.....

    Hi All, I am writing the report as per the clients requirement. for this i am using the IT 0007, 2010, 2011. Here i am using the LDB PNP for this report. i have declared  as below. INFOTYPES: 0007, 2010,2011. The infotypes are filling with the record

  • Function Groups of different package in ECC 6

    Hi, I am facing a very peculiar problem with using an Include in two different function groups in different packages. We are moving from R/3 4.6C to ECC 6. Now FG1 in PKG1 has an Include1 which uses a <b>parameter defined in a function module</b> in