HP Pavilion dv6 2670qm - Windows 7 - USB ports do not power iPAD mini

All of my USB ports work fine with media drives and to connect to my Android phone.
My problem is that they don't provide power to my iPAD mini. i spent 45 minutes at the Apple store uninstalling the Apple mobile drivers and iTunes and re-installing them.  The Apple tech recommended that course of action. Unfortunately it made no difference, still no power to the iPAD mini. My iPAD mini and cable work with other laptops but not my dv6 2670qm.
My iPAD mini has never worked on my laptop.
Any Suggestions?

Hi Super Mario,
Thank you for your quick reply.  In the second paragraph of my post, I noted that the iPad mini and cable work with other laptops, both x86 and Apple (tested at home and the Apple store).  It works for charging and iTunes on all of the other computers we have tried.  Neither of those functions work on the HP dv6, in fact be iPad doesn’t even indicate that there is not enough power or that it is an incompatible port (the error messages referenced in the article).  It does nothing at all when plugged into the dv6’s USB ports.
The Apple article you referenced indicates that the USB port must be at a certain power level.  Can you confirm the power level for the USB ports on the dv6 Intel 2670qm?  It seems like a lot of people have trouble with the USB ports on the dv6 based on the posts.  Can you think of any other explanation for in the non-recognition of the iPad mini?
Thanks again.

Similar Messages

  • Why can I charge me iphone with my car's usb port but not my ipad?

    Why can I charge my Iphone in my car using USB connection but not my Ipad?

    Because the iPad requires a lot more power to charge than your iPhone, and typically car and computer USB ports simply don't proivide that much.
    Its the same reason your iPhone comes with a 5Watt charger (and even then the iPhone only uses part of that) while the iPads come with the 10 or 12 watt charger.
    They just need more power.

  • HP Pavilion dv6 All 4 USB ports stopped working

    Hello,
    I recently bought a Pavilion dv6-6c11sa laptop. Windows 7 Home Premium 64-bit
    Everything was working fine for about a week, and then yesterday all of the USB ports stopped working. I have 4 USB ports in total, two 2.0 and two 3.0. No matter what peripheral device I plug in, mouse or flash drive etc, they're not recognized by the laptop. The lights don't even light up on the devices, regardless of the port. I've tried uninstalling and reinstalling the drivers in device manager, taking out the battery and rebooting, installing the chipset drivers (AMD), nothing works. No programs had been installed 3 days prior to the occurence, although I had rebooted several times in that time frame. I simply booted up the laptop yesterday, and nothing worked.
    Could anyone offer a solution or suggestion, please?

    Hello,
    I recently bought a Pavilion dv6-6c11sa laptop. Windows 7 Home Premium 64-bit
    Everything was working fine for about a week, and then yesterday all of the USB ports stopped working. I have 4 USB ports in total, two 2.0 and two 3.0. No matter what peripheral device I plug in, mouse or flash drive etc, they're not recognized by the laptop. The lights don't even light up on the devices, regardless of the port. I've tried uninstalling and reinstalling the drivers in device manager, taking out the battery and rebooting, installing the chipset drivers (AMD), nothing works. No programs had been installed 3 days prior to the occurence, although I had rebooted several times in that time frame. I simply booted up the laptop yesterday, and nothing worked.

  • Hp pavilion dv6 disables all usb ports when put to sleep mode. hibernate will enable them again.

    Im using an HP pavilion dv6 - 6b56el with Windows 7 Home Premium.
    First install on 15-DEC-2011
    When I put the PC to sleep it will disable all USB ports.
    When I restart the box or put it to hibernate (and wake it again) the USB ports wil work again.
    This happens when running on battery or connected to a power supply.
    As far as I can see I checked all power settings that could possibly disable the USB ports.
    I think the latest changes to the system made before this happens were automatic windows updates on 18-DEC-2011 and 19-DEC-2011.

    Hi,
    There are some computers on the market which have special USB port(s) stay awake during the computer in sleep mode. In your case, you can change this using Device Manager under power management  tab (un-tick "Allow the Computer to turn off this device to save power").
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Pavilion dv6 2190us esata/usb port and Dual HDD Dock

    When I connect  a dual HDD dock (BlacX Duet) to the esata/usb port only one drive is recognized.  Can this esata/usb port support dual sata drives?  How do I make it work?
    Windows 7  64-bit
    Core i7 Q 720 1.6Ghz

    I have the exact same question with my DV6T I bought Nov 2009.  Did you ever get an answer?  I want to buy a dock that supports 2 sata drives and connects via 1 eSata cable to the laptop.  But before investing need to know if the eSata port is multi port aware as the docks require the laptop chipset be able to support. I emailed HP help desk without success so far.  Any info is appreciated...thanks.

  • My usb port does not work on all user accounts

    My usb port does not power my iPhone or Apple keyboard on my main account, but if I switch users it begins to work
    Spring 2011 macbook air with the latest OSX as of Jan 2012.
    Thoughts
    THANKS
    Stan

    Try Resetting the System Management Controller (SMC)

  • HP Pavilion dv6-6b10tx two of the usb ports are not working

    I have recently bought a HP Pavilion dv6-6b10tx....and had it fixed by hp for a problem with the beeping noise.
    After sending my laptop for repairs( replacing the system board), I received my laptop but two of my usb ports are not functioning...
    I did a bios update and did the hp update to see if it actually fix anything but not luck.  So I went device manager and found a exclamation mark on the renesas electronics usb 3.0 host controller with a device status 'This device cannot start. (Code 10)'.  What do i do??

    The question is why is the port not working?  Is something in the port that you can see?  If not, then there isn't much you can do but take the computer in to the genius bar and have the techs see if it is a circuit problem that can be fixed.

  • PavillionG​7-2315nr windows 7(64 bit) USB serial control or usb ports are not working. Please help!

    Hi I downgraded the laptop from windows 8 to windows 7 64 bit. Two of my USB ports are not working and cant find the right drivers for it. Can you please direct me, where I can download and update the drivers? Thanks in advance.
    Shawe

    Hi:
    Download and instal both of these drivers and reboot.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?s​p4ts.oid=5229463&swItemId=ob_125616_1&swEnvOid=405​...
    http://h20565.www2.hp.com/hpsc/swd/public/detail?s​p4ts.oid=5229463&swItemId=ob_123787_1&swEnvOid=405​...

  • ITunes said my iPod Nano 4G is corrupted when it's in one USB port, but not in the other.

    iTunes said my iPod Nano 4G is corrupted when it's in one USB port, but not in the other. Is the port faulty? Windows 7 PC

    Could just be a loose connection or that the cable itself is going bad.  There are a number of factors that could play into this scenario.
    B-rock

  • T420 USB Ports do not work after installing XP

    Hello my office has  been using Lenovo's for some time now but we recently purchased a T420 and installed Windows XP SP3 on it.  The issue we are having is that the uSB ports do not work.  I have tried every driver I can find but still no luck, can anyone help?

    hey chris0277,
    could you check in Device Manager and see if there is any ? or ! symbol on the USB area.
    If there is, i do recommend uninstalling the drivers from it and then visit http://support.lenovo.com and update your unit
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • One of my usb ports in not working

    On  my compaq presario v5000, os xp media center, the bottom usb port is not working. When i plug a thumb drive in, it does not reconize it. The mouse lights up but does not work. It shows up in device manager and says it is working properly. The other port works fine. Just reinstalled windows and the computer is completely up to date with all the service packs etc. Have tried unpluging and restarting to no avail. Have tried updating but says it cannot find a better driver. Please Help. Thank you.

    Could you please give me the exact model number of your notebook?
    You can use the following document if you need assistance in finding it.
    http://goo.gl/GDeRb
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • USB ports does not work

    Hi I have problems with not working USB ports. It used to work. I downloaded actual drivers at msi.com for my gaming notebook GX 60 Destroyer and now my USB ports does not work. What should I do?

    What driver have you updated?
    Try to do an EC firmware reset by removing the battery and the AC adapter then put the battery back with AC adapter attached.
    Same questions like Pegasus asked, does all ports not working? which one exactly? What OS are you using?
    Have you done any changes to the system? (for example: self-install OS or changing OS)

  • My USB Port does not Find my I POD

    My USB port does not find my I POD. I have Installed all th elatest software.

    Welcome to Apple Discussions!
    Does the iPod show Do Not Disconnect? You may want to try resetting your iPod while it is connected...
    http://docs.info.apple.com/article.html?artnum=61705
    See if this link helps too...
    http://docs.info.apple.com/article.html?artnum=61711
    Finally, more details on the issue such as what your computer (if anything) does and what the iPod does.
    btabz

  • I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

  • Audio output and left USB port is not working!

    Hi! I have MacBook Air 13" late 2010, Audio output and left USB port is not working!
    What happened?
    Part No.: Z0JH000TE RS

    If the left USB port doesnt work with an external mouse its seems to be a hardware malfunction of this USB port.
    The newest BIOS is already installed?
    Have you removed all USB ports from device manager and restarted your notebook?
    If you have already tried this, contact an authorized service provider. The guys can try to fix this issue and it should be covered by warranty, if you still have warranty on this notebook. :)

Maybe you are looking for

  • Site won't display in IE, need help BAD...

    Heya, My website http://www.firetree.us is not displaying at all in IE7 (possibly IE6 too) but unfortunately I don't have a machine I can test it in. I'm really in need of some help because it works perfectly in Safari, FF PC & Mac but IE doesn't dis

  • JDBC URL problem

    hello to all! Im a newbie in database programming using JDBC. I would like to ask for the format of URL of Sun's JDBC. I would also would like to know if it is possible to create a database from native java code. that would be my questions for now. j

  • PB and CS SDK

    Hello, I've posted this question in the Creative Suite SDK but I haven't got any answer yet, so I'm going to try here... :-) Is it possible with CS SDK to embed a PixelBender kernel into a Ps extension, in order to apply it to the active Ps document?

  • Realplayer Download Addon is not working with Latest Firefox 5.0? Please assist.

    After updating firefox 5.0, real player download addon is not working with it. Have any fix available for this or any solution available. Because of real player addon is very easy to use to download video contents from any website. Thanks,

  • PP BOM

    Question: SD order SD01,SD02 Product : P1 ,P2 P1's component : A1 , B1 P2's component : A1 , B2 A1 is a semifinished prod(HALB) , it has many boms. Product Order :     PP01 produce A1 (the total amount of P1 & P2)     PP02 produce P1     PP02 produce