HP Pavilion Dv6 3125ej needs "hard reset" every time when turning on

I have an issue that each time after the compuer shuts down, the first startup stucks on black screen. I have to do hard reset and only after the windows comes up.any ideas how to solve it? I've already checked my BIOS version and it's the latest one (F.29)

You need to do a clean install of Windows on it. The hdd has drivers for completely different hardware. Too bad you didn't make your Recovery disc set. It would restore the hdd to HP with all drivers/software installed. That would depend on if the hdd is at least the same capacity or larger than the original. Recovery Discs balk at a smaller capacity hdd. You can order Recovery Medai for about $16: https://h10025.www1.hp.com/ewfrf/wc/mediaOrder?cc=us&lc=en&productOid=5173064&softwareitem=656000-002 ================================== If you can read the 25 character Microsoft Windows 7 license key, you can download a Windows 7 ISO file to burn to a DVD or USB flash drive. The version must match version that came installed on your PC as listed on the Microsoft COA sticker attached to bottom of laptop. Such as Windows Home Premium. Link to the Windows 7 ISO file downloads: http://getintopc.com/softwares/operating-systems/page/9/ You can use the Windows 7 USB/DVD installation tool to convert the ISO file you download. Link and instructions below. You need a DVD+R or DVD -R . Or a 4 GB flash drive to use the USB method. http://www.microsoftstore.com/store/msusa/html/pbPage.Help_Win7_usbdvd_dwnTool#installation

Similar Messages

Need to reset every time I turn iPod on

For the past day every time my standard 20GB click-wheel iPod has turned off, both from me manually doing it and inactivity, I need to reset it to get it to come back to life (that is, hold the menu and select buttons). It's almost as if it is freezing every time it is off. Has anyone else come across this problem before and would be able to assist me in this matter? It's pretty frustrating. Thanks very much.
-Robert

For the past day every time my standard 20GB
click-wheel iPod has turned off, both from me
manually doing it and inactivity, I need to reset it
to get it to come back to life (that is, hold the
menu and select buttons). It's almost as if it is
freezing every time it is off. Has anyone else come
across this problem before and would be able to
assist me in this matter? It's pretty frustrating.
Thanks very much.
-Robert
Mine has done the same thing for about 2 months and there dosent seem to Be ANY help from Apple OR Ipod at all on any thing it seems that once thay have our money then thay dont want anything to do with us at all so it seems that the only thing we can do is to NEVER buy A another apple product I hve been trying to get some help with this since I bought my I pod New and I cant. ALL I WANT IS THE THING TO WORK LIKE IT IS SUPOSED TO IM Tired of the poor support....
hi end lapto Windows XP

WIndows 10 Not recovering from Sleep mode. Hard resetting every time.

I have a HP Pavilion g6-2320tx Notebook PC with WIndows 10. Everytime I put the Notebook on Sleep mode, it gets hard reset next time i open the lid. I have tried upgrading the Graphics driver from Device settings and have looked for updates for all other driver suing HP support assistant. Problem still exists. Anyone with a solution? Please help.

Hello ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your and issues with a BSOD and the error message is CRITICAL_PROCESS_DIED on your HP Pavilion g6-1b60us Notebook. I recommend to restore the BIOS defaults.You could restore the BIOS with this document selecting the reloading the BIOS default settings.You could try using the Windows Update Troubleshooting tool to fix the problem. Here is a document that shows how to update drivers that are not working correctly with Windows 10. I hope this fixes thing for you, please let me know. Thanks.

Yosemite keeps hanging and needs hard reset every night

Problem description:
System keeps locking up from sleep. At least daily system grinds to a halt and does not respond (other than mouse) and I have to do a hard reset (power recycle) to get it back up and running. I have done a clean install of Mac OS and have had this problem regardless of what else has been installed. Tried both a firmware and SMC/PRAM reset, and still no change. Getting really tired of this!!!!
EtreCheck version: 2.1.2 (105)
Report generated December 15, 2014 at 3:37:57 PM PST
Hardware Information: ℹ️
iMac (27-inch, Late 2012) (Verified)
iMac - model: iMac13,2
1 3.4 GHz Intel Core i7 CPU: 4-core
32 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
BANK 0/DIMM1
8 GB DDR3 1600 MHz ok
BANK 1/DIMM1
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce GTX 680MX - VRAM: 2048 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 6:14:23
Disk Information: ℹ️
APPLE HDD ST3000DM001 disk1 : (3 TB)
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
BOOTCAMP (disk1s2) /Volumes/BOOTCAMP : 350.00 GB (282.42 GB free)
Recovery HD (disk1s4) <not mounted> [Recovery]: 650 MB
MAC_Drive (disk2) / : 2.76 TB (1.33 TB free)
Core Storage: disk0s2 120.99 GB Online
Core Storage: disk1s3 2.65 TB Online
APPLE SSD SM128E disk0 : (121.33 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Boot OS X (disk0s3) <not mounted> : 134 MB
MAC_Drive (disk2) / : 2.76 TB (1.33 TB free)
Core Storage: disk0s2 120.99 GB Online
Core Storage: disk1s3 2.65 TB Online
USB Information: ℹ️
Generic USB3.0 DEVICE
KODAK i1220 SCANNER
Apple Inc. FaceTime HD Camera (Built-in)
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Drobo 5D
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hypervisor (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.netbridge (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.usbconnect (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.vnic (10.1.1 28614 - SDK 10.7) [Support]
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Support]
/Applications/Toast 11 Titanium/Toast Titanium.app
[not loaded] com.roxio.TDIXController (2.0) [Support]
/Library/Extensions
[loaded] com.TrustedData.driver.VendorSpecificType00 (1.7.0 - SDK 10.7) [Support]
/System/Library/Extensions
[loaded] com.drobo.SCSI.ThunderBolt (1.1 [70504] - SDK 10.8) [Support]
[not loaded] com.dymo.usbprinterclassdriver.kext (1.1 - SDK 10.9) [Support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[running] com.adobe.AdobeCreativeCloud.plist [Support]
Launch Daemons: ℹ️
[running] com.datarobotics.ddservice64d.plist [Support]
[running] com.datarobotics.ddserviced.plist [Support]
[invalid?] com.dymo.pnpd.plist [Support]
[running] com.insynchq.insync.daemon.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[failed] com.lastpass.LastPassHelper.plist [Support] [Details]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
Insync Application (/Applications/Insync.app)
BetterSnapTool Application (/Applications/BetterSnapTool.app)
Path Finder Application (/Applications/Path Finder.app)
Internet Plug-ins: ℹ️
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
DYMO NPAPI Addin: Version: 1.0 - SDK 10.9 [Support]
QuickTime Plugin: Version: 7.7.3
nplastpass: Version: 3.1.61 [Support]
DYMO Safari Addin: Version: Unknown - SDK 10.9 [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
Safari Extensions: ℹ️
LastPass
Open in Internet Explorer
3rd Party Preference Panes: ℹ️
None
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      3% WindowServer
      2% AddressBookSourceSync
      2% Google Chrome
      1% fontd
      0% Insync
Top Processes by Memory: ℹ️
344 MB Google Chrome
309 MB mds_stores
172 MB spindump
137 MB Finder
103 MB ocspd
Virtual Memory Information: ℹ️
26.38 GB Free RAM
4.54 GB Active RAM
1.37 GB Inactive RAM
2.06 GB Wired RAM
31.05 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 15, 2014, 09:24:09 AM Self test - passed
Dec 13, 2014, 09:46:37 PM LastPassHelper_2014-12-13-214637_shenpa.crash
Dec 15, 2014, 09:24:41 AM LastPassHelper_2014-12-15-092441_shenpa.crash

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the BOOT_TIME log message that corresponds to the last boot time when you had the problem. Now clear the search box to reveal all messages. Select the ones logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

IPhone 3G resets every time when plugged into computer through a hub

Every time I plug my iPhone 3G into my computer through my powered USB hub, it resets. Bear in mind, I have been using this hub to charge my phone with for over a year without problem. Since the recent software update, I have seen this issue as well as a dramatic decrease in overall battery life and responsiveness. The biggest issue here, however, is the constant resetting.
If kept plugged in, the phone will remain on the apple logo until I disconnect it. Give it a minute, and it is back up, but as soon as I need to charge it or sync it, it resets again.

Greetings,
You are going to get your best charge using the charger that came with the phone, and the next best solution is to use a USB port directly on your computer, as long as it is USB 2.0. If you lost the original charger, buy a new one - they are cheap. It sounds like your USB hub may be out of sorts, as I have seen iPhones reboot plugging them in to a faulty hub, where it seems to work for most things but not all. Sometimes there isn't enough power to go around - the power source for the hub may be on the blink.
The recent software update won't cause your phone to discharge faster - you have a rogue app, or the phone is way out of sync with the meter. You could have a third party app that worked well before the update, but it doesn't now - that's the way it is with some third party apps, check for an update for your apps. Third party apps are the most likely to cause issues - be very careful with 3rd party apps. If one seems to be acting odd, check for an update.
That's what the update was all about, making the meter and battery work more accurately with each other, but you may need to calibrate it. I have had several people, locally do this and it has worked perfectly. You should recalibrate every couple of months. I do mine every two months.
Cheers,
M.

IPhone 4 turning off randomly once in day. Need to hard reset every time.

Hi,
My iPhone 4 is about 2.5 years old. Few days back it turned off suddenly while i was calling. It was not turning on from power button so I reset it by pressing home+power key. It starts and work normally. After few days it again turned off and i again reset it. Now this behaviour is continueing. I have tried reseting it but issue not resolve. Please help to fix this

Sounds like you need to take it back to the Apple store and tell them the replacement isn't working.

I recently updated my MacBook Pro and now it says I need to restart every time I turn the computer on. It is on a grey screen.

I have not used my MacBook Pro for a few months and when I started it up did all the microsoft and system updates. Now it will not turn on and it goes to a grey page that state "You need to restart you computer. Hold down the Power button untilmitmturns off, then press the Power button again." I have done this several times and keep arriving at the same page.

OK, then there is little else to do other than to reinstall OS X.
Make sure you removed everything connected to the MBP including any USB devices.
If your Mac came with a System Install DVD, then insert it and hold the c key while starting your Mac. This will boot from the DVD instead of your internal disk.
If you find the grey screen reappears then it may not have restarted from the disc, so try again. You have to get past this step to do anything. If you can't, the problem may be a dirty or damaged DVD or an inoperative optical drive.
When it gets to the Mac OS C Utilities screen, select Disk Utility and repair your hard disk. Record any errors that it finds, since your problem may be due to a failed hard disk. If that is the case, the failure will probably arise again.
Then, reinstall OS X. Reinstalling is non-destructive to your user accounts or data.
If your Mac is running Lion, or Mountain Lion, you can boot OS X Recovery and perform all the above without a disc.
Read about OS X Recovery here: http://support.apple.com/kb/HT4718

My Mac running Yosemite 10.1.1 does a hard install every time I turn it on? Suggestions?

My Mac is running Yosemite 10.1.1 and was working fine until recently. Now it does a hard install overtime I turn it on. Any suggestions?

I guess you meant to say 10.10.1? Not sure what you mean by a "hard install"?

UC520 Resets every time when making a SIP trunk Call.

I have a UC520 and i just upgraded to the 8.0.2 software pack. I also added SIP for Skype SIP trunk - when i make a call the router resets. When i do a show ver is see this line - System returned to ROM by error - a SegV exception.

never heard of that...thats not cool...open a case asap.

My Ipad3 is very slow after installing 8.02 and needs a hard reset every 2 minutes.

Hello Community,
I had a wonderful running Ipad3 32gb running on IOS7, now after installing IOS8.02 this device is slow (e.g. Safari) and needs a restart (hard reset) every to minutes because it freezed up. I´m quite unhappy. I tried to stop processes and have a enough free space on the disk. Nothing helped.
I can´t imagine that you beta-tested IOS8 on the IPAD3?
Any solution by Apple?

(A) Try reset all settings
Settings>General>Reset>Reset All Settings
(B) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings

HT1414 why does my iPhone 5s shut down unpredictably and needs to be reset every time to start back up?

why does my iPhone 5s shut down unpredictably and needs to be reset every time to start back up?

Hi Cyprus11,
Thanks for visiting Apple Support Communities.
If your iPhone is shutting down unexpectedly, I recommend going through these troubleshooting steps:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best,
Jeremy

Hp pavilion dv6 6180 help me for this error when I am using my recovery disk

hp pavilion dv6 6180 help me for this error when I am using my recovery disk
The destination drive is not connected

Hello Mohammadshamlou. I understand that you're having some issues using your Recovery Disc. It is giving you the error that the drive is not connected. Is this correct? How long have you had the notebook?
What issue originally led you to want to try a recovery?
The error seems to imply that it is not detecting the hard drive as this would be the most logical destination drive. So, I feel the best thing to try first is verify that the hard drive is in proper working order. Follow these steps and please post the result.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Hard reset 30 times to get my Digitizer working would like to get answer

I bought Palm TX which worked very good for six days, once I had pulled the SD card out the palm froze so I did soft reset with no results. Then I did hard reset when it comes to digitiser screen it goes on and on endless in a loop. I tried hard reset 30 times to get my palm working properly. Can any one explain what the cause would be to avoid this happening next time. I am using the palm with the only one external software "Hand D Base v4.0" . No other software is loaded. Need help
Post relates to: Palm TX

If you hard reset the TX, according to the directions in the link I provided, It will erase all data and 3rd party programs. After the hard reset it sets the device back to factory defaults and would not have any 3rd party programs on the device, thus if it is looping immediately after the hard reset, there is another cause of the looping.
There may be some kind of debris on the screen between the screen and the case of the device. Take a business card or folded piece of paper, insert it between the edge of the screen and the case. Move it around the perimeter of the screen and see if you can get out any debris. If there is no debris, it is probably the digitizer on the screen and the device will need to be replaced.
The powerdigi program must be installed on the TX. If it won't get past the calibration screen, you will not be able to sync the program to the device.
If you just bought the TX, it is still under warranty for 1 year from date of purchase. You can call Palm handheld support at 813-313-4913 and setup a replacement or take it back to the store where you purchased the TX.
Post relates to: Palm i705
Message Edited by cygnusX1 on 09-17-2008 08:21 AM

Hi I just got my iPad 2 and updated it to ios7 . Here is my problem: my Chinese input doesn't work , I need to restart every time . Is it the problem of the iPad? Or iOS 7??

Hi I just got my iPad 2 and updated it to ios7 . Here is my problem: my Chinese input doesn't work , I need to restart every time . Is it the problem of the iPad? Or iOS 7??

Hi Eric Ferguson,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Best of luck,
Mario

After having to reset my Zen Vision M, it now rebuilds the library every time I turn it

My Vision M froze on me about a month ago, and I had to reset it to get it to turn off and back on. When I reset it, it went through the whole Rebuilding process, and then was on again. But half of my music was missing. And now every time I turn it off and turn it back on, it goes through the rebuilding process.
Is there a way to make it stop this. I use it in my car, and every time I get in, I listen to the radio while it's rebuilding. And then I end up forgetting that I even have it with me. Having to wait a few minutes to listen to my music, when I usually only have a little more than a few minutes to listen to music when I use it on my way to and from work, makes it nearly useless.
If I format it back to factory settings, will it fix this issue? Or am I just going to need a new MP3 player? Those Zen Vision W's sure do look really nice. But I don't have the money for that. I'd prefer to just find a fix for this.
Thank you for your help.

MonkeyPeaches,
It could help to update the firmware, and try the Clean Up option in the Recovery Mode menu:
http://forums.creative.com/creativel...p&message.id=3
Hopefully that Clean Up option should clear that problem for you. If it doesn't, it might help to do a full format of the unit before you transfer music back to it. That will remove everything on the player though, so back your music up if you haven't done so already.
CatMessage Edited by Catherina-CL on 0-28-2008 2:26 PM

HP Pavilion Dv6 3125ej needs "hard reset" every time when turning on

Similar Messages

Maybe you are looking for