HP PAVILION DV6 6154FAN NOT WORKING CORRECTLY

MY LAPTOP FAN IS NOT WORKING CORRECTLY A STARTUP MESSAGE COMES FAN NOT WORKING CORRECTLY GO TO SUPPORT FORUM.
MY PRODUCT WARRANTY IS OVER.
PLEASE ADVICE ME WHAT TO DO.
SEEKING FOR KIND SOLUTION.

Try cleaning up the cooling module. Blow compressed air into the fan grill. Test the laptop after the fan and heatsink is clean.
If cleaning the cooling module doesn't help, you'll have to replace the fan. This requires complete laptop disassembly.
In order to replace the fan you'll have to remove the motherboard.
Here's the official service manual which could be useful.
By the way, there are two different types or cooling modules. One for AMD processors and another one for Intel processors (page 93 in the service manual).
If you decide to replace the fan, it's not necessary to replace the entire cooling module assembly (heatsink and fan). It's possible to replace just the fan which can be purchased on eBay.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Similar Messages

PAvilion dv6, fan not working correctly?

Was on my laptop, it shut down randomly, notification popped up saying fan was not working correctly. Is there a way to fix this? Or will it have to be sent away?

Try a can of compressed air in the reverse direction of the normal air flow. You may just have a massive amount of dust on the inside of the heatsink near the fan blades.
Here is a youtube video and about 15min in you can see the fan clearly:
http://www.youtube.com/watch?v=5VMqrudLhJA&feature=player_detailpage#t=1s
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

I have pavilion dv6 sound not working hp provide new update idt stil not working

HI .
i have pavilion dv6 sound not working hp provide new update idt stil not working

Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
Go to Control Panel,Programs & Features-Uninstall IDT software and restart the laptop.Next install using the downloaded file.
```````````````````````````````````````
If still no sound,try a hard reset, works sometimes.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

HP pavilion dv6 microphone not working . help please . . .

HP pavilion dv6 microphone not working . help please . . .

Hi,
DV6 is a series of hundreads of models, what is yours ? To help us answer question quicker, please read this:
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
You may wat to try this first:
1. Right click speaker icon (right hand corner)
2. Select Microphone devices
3. Right click Microphone
4. Enable it
5. Click Apply/Ok
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Why is my built in webcam and mic on my hp pavilion dv6-6113cl not working?

why is my built in webcam and mic on my hp pavilion dv6-6113cl not working?

Enter the device manager and verify that the webcam is present and has a driver installed.
1) Test your webcam by using the YouCam software that was delivered with your notebook. (you should also be able to test it with MSN or Skype setup). You may have to uninstall it and then reinstall the software.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

HP pavilion dv6 fan not working

My HP PAVILIONDV6T-6100 laptop (Product no. LM720AV) is having problems with the cooling fan and overheating. I have started getting the cooling fan not functioning error at startup. When I use the laptop-the cooling fan runs almost all the time. It turns-off when I have only one application running on the laptop.
I understand that since the fan is running perfectly fine, the fan motor is still functional. Could it be dust accumulation that is causing the error and fan running continuously? Where can I get the insturctions for opening the cooling fan assembly and cleaning it? Also will I need to replace the thermal insulation after cleaning?
Thanks
Sunny

I paid $30,000 for my car but I trust the dealer to work on it because I know their mechanics do it every day. I could watch youtube videos and figure out how to do a tuneup but they will do it better. I will change my own air filter however since it is not too hard and will save money. Replacing a cooling fan is more like a tuneup than replacing an air filter. Still, you can do it if you follow the Manual and are careful. Here is the Manual:
Manual
This is the part number for your fan and heatsink:
641477-001
$63 from HP:
http://h20141.www2.hp.com/Hpparts/Search_Results.aspx?mscssid=11C544B95DEB4BC6A0D99C14917258C7&Searc...
$20 on eBay:
http://www.ebay.com/itm/New-OEM-HP-Pavilion-DV6-6000-DV7-6000-CPU-Fan-650797-001-641477-001-665309-0...
I would go ahead and run all the diagnostic tests you can access by tapping F2 and entering UEFI Diagnostics. Other than the fan what other problems are you having?
If this is "the Answer" please click "Accept as Solution" to help others find it.

Hp pavilion dv6 audio not working

product name: HP Pavilion dv6 Notebook PC
Product number: A3L69EA#ABU
no audio is working at all, not even when i use headphones, i have tried turning all volumes up and i have checked that the audio is enabled on the device manager, please help, thankyou

Go to the link below.Enter your Product Number as listed on Service Tag. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop and install using the downloaded file.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Pavilion dv6 mousepad not working

My laptop operates on windows 7, 64 bit.
The mousepad has stopped working and there are no lights displaying on the pad.
I tried installing the driver from HP & it says that Ihave a later driver installed.
I am unable to find that driver. I use a USB mouse but have always done so without a problem until now.
Any ideas?
Thanks in advance

Hi curlyclan,
Welcome to the HP Forums!
Thank you for your post, I will do my best to help.
I hope you enjoy your experience, to help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I grasp that the Touchpad has stopped responding and it is not lit. Here is a link to Using and Configuring the TouchPad (Windows 7 and Vista) that may help. Was it perhaps, accidently disabled?
You can run diagnostics to test the Touchpad for failure. On startup press F2 approximately once every second to display the diagnostic screen. About UEFI and the Startup Menu.
You can also run MS Fix It to help resolve issues. The HP Support Assistant can also help to fix issues and look for updates.
If you would like further assistance, would you please provide the exact model of pavilion dv6 you have? How Do I Find My Model Number or Product Number?
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Pavilion dv6 Webcam not working?

I have a Pavilion dv6-1030ca notebook, and for the past few weeks, I've been having trouble with my webcam. When I open HP MediaSmart Webcam, I get the following error message: "No video device detected. Please plug a video device into your computer. If you are using an integrated camera please make sure it is turned on." I have an integrated camera, and it (usually) turns on when the webcam application opens. I am running Windows Vista with SP1, and have tried many things to fix it, to no avail. The webcam does not appear in Device Manager, under Imaging Devices nor any of the USB Root Hubs. So far, I have attempted to:
- Reinstalled the USB Root Hub Drivers
- Tried to fix the solution in BIOS (as another thread suggested)
- Attempted to use Recovery Manager to reinstall the driver (was not in the list)
- Created Recovery Disks to solve the problem (it didn't)
- Upgraded the MediaSmart Webcam software
I am in school right now, and I really can't afford to give my laptop away to get repaired for three weeks since I have exams coming up. Any help would be appreciated! Thanks!
Message Edited by annabelle89 on 07-27-2009 08:30 PM
Message Edited by annabelle89 on 07-27-2009 08:31 PM
This question was solved.
View Solution.

I am in the exact boat as you.
Couldn't understand why all of a sudden, after about 3 months, the webcam 'device not found' in Win7 Device Manager, Google Chat, Skype, etc.
Called HP support, and they made us do a hard reset of the entire notebook, removing the battery, ac cord, and holding down the power button for 1 minute.
Webcam came back for 1 day, but I'm not about to unplug and reset everytime I am in the middle of a skype call?!
Sadly, HP or Costco (where it was purchased) doesn't seem to care or are willing to provide a solution.
Instead of recalling the computers, like automobile and other industries, they just wait and hope that the warranty runs out before it becomes a big deal.
They didn't stop selling them either, even with this known problem.
So now they have the G series of notebooks, and so the dv6 and its headaches can fade away for HP.
I have probably been involved with over 100 HP product purchases in my job the past 5 years, but this will be the last for the forseeable future.

Audio driver HP Pavilion dv6 is not working, help!!

Hi HP Support Forums.
I'm writting from Perú.
I have a hp dv6-6b03es laptop with beats audio and the original software was Windows 7 Home Ultimate 64 bits. However, I just formatted my laptop with Windows 7 Professional 32 bits. Now i have audio problems, Every time I turn my laptop audio is not heard and I have to reinstall the audio again. Every day! and some time never works
In the webiste support i can't find my operating system(Windows 7 - 32 bits)
Please help me

Hi,
Try the following.
Download the following IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55094.exe
When done,

My laptop sound is not working correctly what to do?

HP Pavilion DV6-3031tx os is windows 7 64 bit and i have taken my laptop in dubai can i get the warrant in india.?

Hi,
Please do NOT post many threads for same problem. What do you mean "not working correctly" ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Some time tech pad not working correctly

I am buy a HP Pavilion laptop from awok.com. Some time mouse teach pad not working correctly some time open windows 8.1 time bar and some time i am using mouse teach pad then automaticly come right click popup menu coming some time i am try to scrol the page using mouse pad then automaticly Select all from the page so please help me

Hello @BABUMON ,
Thank you for visiting the HP Support Forums and Welcome. I have read about your HP Notebook and mouse freezing. Here is a document on how to troubleshoot the mouse and Touchpad sensitivities.
If you will go to the section on Adjusting TouchPad or ClickPad pointing sensitivities it should help resolve the issue.
I would be happy to assist if needed as there are many models of HP Notebooks, I would need the model number.
How Do I Find My Model Number or Product Number?
Please respond with which Operating System you are running:
Which Windows Operating System am I running?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Sorting not working correctly for date field in alv report

Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.

The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work

If statement within a view is not working correctly ?

Hi all,
maybe i am wrong but i think the if statement within a view is not working correctly. See code down below.
I would like to use the Hallo World depending on the page attribute isFrame with or without all the neccessary html tags. Therefore i have embedded the htmlb tags in an if statement. But for any reason if isframe is initial it isn't working. It would be great if anybody could help me.
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if not isframe is initial. %>
<htmlb:content design="design2003">
     <htmlb:page title = "Top Level Navigation view">
<% endif. %>
hallo world
<% if not isframe is initial. %>
     </htmlb:page>
</htmlb:content>
<% endif. %>
thanks in advance and best regards
Matthias Hlubek

Matthias,
The short answer: your example is <b>NOT</b> going to work. The long answer will probably 5 pages to describe. So first let me rewrite the example so that it could work, and then give a short version of the long answer. Do not be disappointed if it is not totally clear. It is rather complicated. (See the nice form of IF statements that are possible since 620.)
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if isframe is <b>NOT</b> initial. %>
<htmlb:content design="design2003">
<htmlb:page title = "Top Level Navigation view">
    hallo world
</htmlb:page>
</htmlb:content>
<% else. %>
hallo world
<% endif. %>
So why does your example not work? Let us start with a simple tag:
<htmlb:page title = "Top Level Navigation view">
</htmlb:page>
Now, for each tag, we have effectively the opening part (<htmlb:page>), an optional body, and then the closing part (</htmlb:page>). We are now at the level of the BSP runtime processing one tag. What the runtime does not know, is whether the tag wants to process its body or not. Each tag can decide dynamically at runtime whether the body should be processed. So the BSP compiler generates the following code:
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
ENDIF.
tag->DO_AT_END( ).
You should actually just debug your BSP code at ABAP level, and then you will immediately see all of this. Now, let us mix in your example with our code generation. First you simplified example:
<% if isframe is NOT initial. %>
<htmlb:page title = "Top Level Navigation view">
<% endif. %>
<% if isframe is NOT initial. %>
</htmlb:page>
<% endif. %>
And then with our generated code. Look specifically at how the IF/ENDIF blocks suddenly match!
if isframe is NOT initial.
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
endif.
if isframe is NOT initial.
ENDIF.
tag->DO_AT_END( ).
endif.
You can see that your ENDIF statements are closing IF blocks generated by the BSP compiler. Such a nesting will not work. This is a very short form of the problem, there are a number of variations, and different types of the same problem.
The only way to solve this problem, is probably to put the body into a page fragment and include it like I did above with the duplicate HelloWorld strings. But this duplicates source code. Better is to put body onto a view, that can be processed as required.
brian

** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)

Hi Friends,
We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY.
We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
lw_fieldcat-lzero = space.
lw_fieldcat-no_zero = 'X'.
After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
We are using SAP ECC 6.0.
Friends, can you clarify the about doubts. It is surprising for me.
Kind regards,
Jegathees P.
Our customer is asked to remove the leading zeros for the numeric field

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

HP PAVILION DV6 6154FAN NOT WORKING CORRECTLY

Similar Messages

Maybe you are looking for