HP Pavilion DV6-6165tx Upgrade Advice Needed

Hi, I purchased HP Pavilion Dv6-6165tx and now I have to upgrade my laptop RAM.
Here are the two models i have selected and i'l like to know if these both models are supported by HP DV6 6165tx.
1. http://www.snapdeal.com/product/transcend-jetram-ddr3-4-gb/1430631
2. http://www.snapdeal.com/product/transcend-jetram-ddr3-8-gb/1430575
Please reply ASAP

In your laptop, a pair of either would be supported. Since you have an Intel processor your laptop can handle up to 16 gigs of memory, 2 x 8 gig DDR3-1333mhz SO-DIMM. 
Your Service Manual
See Pages 5-6. 
You are better off running two identical size and speed modules so it will be dual channel
If this is "the Answer" please click "Accept as Solution" to help others find it. 

Similar Messages

  • Pavilion dv6 WLAN upgrade

    Hello, I have a dv6 product number A1U57AV.  BIOS F.19  Win7 64
    After many chats with support, I wanted to put my findings out, and ask if anyone has found any solutions to this issue.  I was trying to upgrade my Intel Centrino Wireless N 1030 WLAN card with the Intel 6230 Advanced N card.  It states in the manual that my motherboard and chipset should support this card.  I ordered the 6230 from Amazon.com, and it didn't work.  I figured I had a non-genuine part, and returned it.  I was rooked into ordering the same card for nearly 4x the price from HP Parts.  I did so, and found that the same WLAN hardware configuration error 702 came up before the win7 boot page even came up.
    I found through investigation that the part numbers of the hardware are on a whitelist in the BIOS, and if the configuration fits the restrictions, the hardware will work.  Unfortunately, I found that there was a mistake in the recording of the part numbers for the WLAN hardware. The 6230 is listed instead with a duplicate 1030 part number.  The correct part numbers are as follows:
    Intel Centrino Wireless N 1030 WLAN module 631956-001
    Intel Centrino Advanced-N 6230 WLAN module 636672-001
    The 1030 card is not cutting it for me, and is ruining what is otherwise, an outstanding laptop.  It's like having training wheels on a Cadillac.  All that would be needed is to insert the correct part number into the BIOS program code, and I am off to the races!
    Can anyone help me?  Anyone have anything better to tell me than support did?  How do I get this problem to the engineering/programmer level of support?  So many questions.
    Thanks in advance!

    Hi,
    Please do not post same question many times. Thanks you. Try another one:
      http://h30434.www3.hp.com/t5/Wireless-Internet-Home/Pavilion-DV6-WLAN-upgrade/m-p/1605525
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • USB ports not working Pavilion DV6-6165tx

    hi all,
               i bought pavilion dv6-6165tx 2 years back and ibought a new internal hdd as my old one became corrupt  , i installed os win 7 pro (licensed )  and drivers from HP online.
     now the problem is that my left side usb ports are not working  , and also my finger print reader
    when i checked in device manager  i have 2 errors
    1.)Universal Serial Bus (USB) controller
    2.)Unknown device
    and the hardware id's are as follows
    PCI\VEN_1033&DEV_0194&SUBSYS_3388103C&REV_04
    PCI\VEN_1033&DEV_0194&SUBSYS_3388103C
    PCI\VEN_1033&DEV_0194&CC_0C0330
    PCI\VEN_1033&DEV_0194&CC_0C03
    USB\VID_138A&PID_0018&REV_0078
    USB\VID_138A&PID_0018
    i dont know what to do ,please someone guide me how to get rid of these problems and also some link of updated drivers .
    help ,much appreciated
    thanks
    This question was solved.
    View Solution.

    Please Click Here to download the drivers for PCI\VEN_1033&DEV_0194&SUBSYS_3388103C&REV_04
    And for USB Click on the below shown link
    http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_132256_1&sp4ts.oid=6431933
    or
    https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3467&DwnldID=23734&keyword=USB+3.0&la...
    Hope this helps, for any further queries reply to the post and feel free to join us again
     **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • HP Pavilion dv6-6170ee upgrade

    Can i upgrade HP Pavilion dv6-6170ee to 16 GB RAM?
    This question was solved.
    View Solution.

    Hi,
    The following link shows its specs:
       http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c02982007
    8GB is the max. BUT Crucial says for a similar machine:
        http://www.crucial.com/upgrade/HP-memory/Pavilion+​DV6+Series/Pavilion+dv6-6170us-upgrades.html
    but not the following:
        http://www.crucial.com/upgrade/HP-memory/Pavilion+​DV6+Series/Pavilion+dv6-6172nr-upgrades.html
    Confusion isn't it. To be at the safe side, I would follow the specs.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Pavilion DV6 Graphics Upgrade

    Hello ladies & gentlemen,
    I'm the proud owner of a HP Pavilion DV6 Notebook. The only flaw I've found is that it doesn't have a good video performance (which is a shame for a having an 720p HD display). The graphics device installed is a Mobile Intel 4 Series Express Chipset Family.
    How can I upgrade my Notebook graphics and video processing?
    If you need any more information in order to answer my question, please tell me.
    Thanking beforehand,
    karu_nto
    {Personal Info Removed}
    This question was solved.
    View Solution.

    Hi,
    For all practical purposes, it's not possible to upgrade your graphics device as the graphics chip is physically soldered to the Motherboard of your notebook.
    Best wishes,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Pavilion DV6-6130ec- Upgrade to FULL HD Display

    Hello, I own an HP Pavilion DV6-6130ec, there is PN:LS354EA.
    I want upgrade the notebook with FULL HD Dispaly- SPARE:665335-001 
    But I need a FHD supported cable for that notebook,  because when I connect FHD display to my laptop it works but there are stripes on all the displays..  my cable is LVDS G AB610 A   HPMH:B2995050G00004   
    In manual I found that this cable supports FHD 656805-001 but service center here can not order it.. 
    Can you help me with this upgrade problem?   
    Original post in my main language: Zdravím, vedeli by ste mi poradiť ohľadom LCD káblika?
    Mám ntb HP DV6-6130ec  PN:LS354EA
    V ntb je LCD displej s rozlíšením 1366x768  SPARE: 667896-001 a chcemsi tam dat FULL HD SPARE:665335-001.
    Len neviem či môj LCD kábel podporuje FHD rozlíšenie, ked nan zapojímFULL HD displej tak je obraz čiarkavý a taký do zelena ale inak ho zoberie- je na nom označenie: LVDS G AB610 A   HPMH:B2995050G00004, Spare neviem lebo som nerozoberal palm rest. iba displej
    Viete mi poradit prosím Vás,  či káblik s FHD podporou.. podla manualusom našiel tento že má podporu FHD:  656805-001 a čislo 644362-001mám asi v ntb ja.
    Vďaka. 
    This question was solved.
    View Solution.

    Lukitech wrote:
    Hello, I own an HP Pavilion DV6-6130ec, there is PN:LS354EA.
    I want upgrade the notebook with FULL HD Dispaly- SPARE:665335-001 
    But I need a FHD supported cable for that notebook,  because when I connect FHD display to my laptop it works but there are stripes on all the displays..  my cable is LVDS G AB610 A   HPMH:B2995050G00004   
    In manual I found that this cable supports FHD 656805-001 but service center here can not order it.. 
    Can you help me with this upgrade problem?   
    Original post in my main language: Zdravím, vedeli by ste mi poradiť ohľadom LCD káblika?
    Mám ntb HP DV6-6130ec  PN:LS354EA
    V ntb je LCD displej s rozlíšením 1366x768  SPARE: 667896-001 a chcemsi tam dat FULL HD SPARE:665335-001.
    Len neviem či môj LCD kábel podporuje FHD rozlíšenie, ked nan zapojímFULL HD displej tak je obraz čiarkavý a taký do zelena ale inak ho zoberie- je na nom označenie: LVDS G AB610 A   HPMH:B2995050G00004, Spare neviem lebo som nerozoberal palm rest. iba displej
    Viete mi poradit prosím Vás,  či káblik s FHD podporou.. podla manualusom našiel tento že má podporu FHD:  656805-001 a čislo 644362-001mám asi v ntb ja.
    Vďaka. 
    Hi,
    I have ordered a FHD cable from China for a Dv6-7000 but it uses a different part number and the product number (50.XY...) is also different. You have to look for a LCD cable 50.4RN10.022.
    http://www.ebay.com/itm/LCD-LVDS-Cable-for-HP-Pavilion-DV6-6000-FHD-656805-001-50-4RN10-022-/1813516...
    The thing is that most of the suppliers use the LVDS 50.... product numbers and not part numbers like HP. It took me hours to find the right product number for my Dv6. 
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • Pavilion dv6-7090el Upgrade?

    Hello,
    sorry for my broken English ...
    I would like to upgrade my netbook Pavilion dv6-7090el.
    Someone please tell me which components can be replaced?
    Hard disk? GPU? RAM?
    I would like to install an SSD: should I choose a particular model, or are
    all compatible?
    Thank you!
    fp1959
    This question was solved.
    View Solution.

    It comes with 8 gb of RAM which is maxed. The CPU is fast already and an upgrade would not be worth it. The video cannot be changed. The hard drive could be replaced by an SSD and that is going to be a very noticeable upgrade. I personally have had great luck with Samsung 840 SSDs, either the Evo or the Pro series. The Evo is mainstream and the Pro is kind of pricey. But there are a lot of very good SSDs out there. If you need any more help post back.

  • Hp pavilion dv6 6165tx sound not working at all???

    i have  strange problem with my dv6 6165tx.that its sound is not working at all.sound is showing in speaker setting & equilizers but not coming in speakers & headphones also..pls help me..........

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55094.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, restart the notebook and let Windows fully load.  Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    If you still have no audio, open windows Control Panel, open Administrative Tools and open Services.  Check that the following services are all showing as Status= Started and Start-up Type= Automatic
    Audio Service
    Multimedia Class Scheduler
    Windows Audio
    Windows Audio Endpoint Builder
    If you need to make a change to any of the above, just right click the service and select Properties, then in the dropdown box next to 'Start-up type',  select Automatic and click Apply to save the change.  Then click the Start button.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Pavilion dv6 - 2090er - upgrade wireless card "b/g" to "n".

    I have HP Pavilion dv6 - 2090er and I 'd like to upgrade my wireless card "b/g" to "n". What a model of wireless card is compatible to my system

    Hi:
    Below is the link to the service manual for your notebook.
    http://h10032.www1.hp.com/ctg/Manual/c01860375.pdf
    Supported wireless cards can be found in Chapter 3, starting on page 3-6.
    If I were you, I would get the Broadcom 4322AGN 802.11a/b/g/n WiFi Adapter with the applicable HP part # depending on what country you live in.
    That is a dual band (2.5/5.0 GHz card).
    You must get the card with the HP part # on it, or it will not work.
    I like to get used but tested and working cards on eBay. So a search by the part number.
    Or you can order new from HP at the link below.
    http://h20141.www2.hp.com/Hpparts/Default.aspx?mscssid=1D1B095404B64D8B80E1ACB9DD38E76D
    Paul

  • Pavilion dv6-3250US UPGRADE to USB 3.0 Ports

    Can I upgrade a Pavilion dv6-3250US to USB 3.0 and if so, how do I do this?

    Hi Dkellyco,
    I am sorry to inform you the only way to upgrade to USB 3.0 is to install a new motherboard.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Pavilion dv6-1455ev upgrading memory

    Hello,
    I just purchased an 8GB memory module DDR3L (L for low voltage I think), installed it in my pavilion dv6-1455ev but the computer fails to boot.  When I turned it on, a blank screen comes up and numlock and caps lock flash.  This indicates memory failure I think.  I had to install back the 2 modules that came with the laptop in order to boot it. 
    The question is what kind of memory does the pavilion dv6-1455ev support? Is it high or low voltage?  I beileve DDR3 is the correct option, I am not sure about the voltage.  And what configuration? Ie, 1 module, 2 modules, etc.  I tried to locate this information on the hp support page of the  dv6-1455ev but it seems that this information is not available.
    Thanks for any help
    Chris

    Hi,
    The following link shows its specs:
       http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02066926&cc=lb&dlc=en&lc=fr
    It uses normal RAM, not low voltage. You can find all information for it on the following link:
       http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&l​c=en&product=4146860
    Regards.
    ps You may want to bookmark the above link for future references.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Pavilion DV6-3110er Upgrading Wi Fi

    Hello!
    I wanted to replace the laptop HP Pavilion DV6-3110er Broadcom 4313 WiFi module 802.11b/g/n at Ralink RT3592 802.11 b / g / n WiFi, but the bios gives me an error 702, apparently it's hardware is not included in the white list, but my privybore notebook drivers are available there for Broadcom 4313 802.11b/g/n what could be the problem? And what WiFi modules are available for this laptop? Bios updated to F.29.

    Hello zadonec,
    You want to change the Wi-Fi adapter in your notebook.
    I don't think that the Ralink RT 3592 is supported by you notebook.
    Here is a link to your service manual with parts for your notebook.
    Clicking the White Kudos star on the left is a way to say Thanks!
    Let me know how everything goes.
    Have a good day.

  • HP Pavilion dv6-1460er upgrade ram problem

    Hi,
    in my Pavilion dv6-1460er laptop I have Samsung M471B5673EH1-CH9 2gb memory (2GB, 1333MHz, DDR3-1333 PC3-10600).
    I want to add Kingston KVR13S9S8/4 4gb module.  Looks like they have the same specifications. But when I add Kingston module I have black screen and my laptop wont load. I tried removing my old ram and starting the laptop only with kingston module but still got black scrreen. 
    What might the problem be?
    Thanks for your help.
    This question was solved.
    View Solution.

    But why when I add Kingston 99U5428-046.A00LF 4GB (its 1333 if I am not mistaken) everything works fine? 

  • New mac pro upgrade advice needed or keep the old clunker

    I have a 2008 mac pro with only 8gb ram
    I am use the  computer for FCP and Logic as well
    as photo editing.  It is not my livelihood I am just a serious hobbiest.
    My option is to go with a new Mac Pro probably 8 core with 1 TB
    I would have to get an enclosure for my 4  thunderbolt internal drives.
    I also have 2 firewire 800 2T external drives.
    My monitor is a 30 inch cinema display
    so an 8 core with 64gb plus 4k monitor and upped graphics card is $11,600 add my buisness discount i am probably
    looking at around $11,000
    My other option is to keep the clunker add a 1TB SSD PCIe card form owc and add 8gb ram this will
    cost me $1,400. I am really only throwing away the $200 for increasing the ram as
    the PCIe ssd drive can be salveged and used in the new mac pro if I bought an pcie/ thunderbolt  enclosure.
    Tha advantage of going this route is I could use the clunker for another year allowing time
    for the kinks in the new mac pro to be ironed out as well as the advantage of faster chips in next years model.
    The other issue I have is a use a Universal Audio PCI card with 4 sharc processors to run specific plugins that need that
    card in logic.  That card will no be compatible with the new Mac pro and the replacement cards are over $1000 that are compatibe
    Just looking for some advice do you think the SSD PCI card and ram will keep me happy with the performance to hold off upgrading for
    a year or shoul I just put the clumker out of its misery?

    radman wrote:
    Just looking for some advice do you think the SSD PCI card and ram will keep me happy with the performance to hold off upgrading for
    a year or shoul I just put the clumker out of its misery?
    On this page Apple compares the 2012 Mac Pro (12-core) to a 2013 Mac Pro (12-core). The new Mac Pro performs about 3x faster at rendering. You didn't say how many cores your Mac Pro has but you could expect about a 4-5x faster performance increase.
    I would have some questions for you:
    How much time do you spend waiting on your current Mac Pro?
    How much money are you willing to spend for a 4-5x increase?
    I have a 2010 Mac Pro with a 960 GB OWC Mercury Accelsior E2 PCIe SSD, program launches and computer restarts are much faster. Compressing video takes the same amount of time as it did when I booted from a hard drive. I can't read or type email any faster, iTunes plays music just as fast as it always has with a hard drive.
    I would use Activity Monitor to monitor your computer's memory use while you work with FCP and Logic to see if you are maxing out your memory then adding more may be the way to go.
    I use my Mac Pro for recording over-the-air TV and compressing that video into an Apple TV usable format. I've found that having a dedicated drive for capture works well. Also, when I compress the video my capture drive becomes a dedicated source drive for Compressor and I write the output file to a separate dedicated drive. This ensures I maximize data flow and keep all my cores nearly fully utilized. I tend to do the processor intensive tasks (compressing video which can take hours) at the end of the day when I know I won't be using the computer (or only doing light work on it such as email or web surfing).

  • Upgrade advice needed

    Hi,
    I currently use logic express on an emac G4 with 1 gig Ram and only a 40gig harddrive.
    I want to upgrade to logic pro and have a bit of money spare but I was wondering which would be the most cost efficient way to do it.
    Do I:
    1) Sell the emac (ebay?) and reinvest in an imac G5 with logic pro
    2) Upgrade to logic pro and somehow improve the performance of the emac to cope with running it (external hard drive and things)
    Any advice would be much appreciated.

    Pete,
    The answer depends on what you plan to do with Logic Pro that you are not now doing with Express. (Do you really need pro?) For the basic things, Pro is not going to be much different performance-wise, and audio will use the same amount of disk space. However, if you're upgrading to use the fancier plugins, then the higher performance machine makes sense.
    In my opinion, you will want and external hard drive either way. Performance is better and you don't clutter your startup disk with tons of audio files.
    Eric

Maybe you are looking for