HP Pavilion dv6 7007tx. How to restore HP startup logo with windows 7 professional.

HI
I bought HP Pavilion dv6 7007tx noteboook two days back and installed Windows 7 Professional.
I've noticed that while booting up, its HP start up logo does not appear, it staright away loads with Windows 7.
How can i restore its original HP logo before Windows 7 starts up.
Thanks
AftabFarid

Hello
Thanks for your prompt response. I have tried to solve the matter by following the steps given in the first link but i was unable to find BOOT SECTION and also BOOT SECTION DIAGNOSTIC SCREEN. All i could find in the BIOS setup were MAIN, SECURITY, DIAGNOSTIC, SYSTEM, CONFIGURATION & EXIT Menues, therefore the matter is still unsolved. Will i need to reinstall Windows 7 again to fix this?
Secondly, there is another issue with my newly bought machine HP Pavilion dv6 7007tx is that, my sound often will not work particularily for multimedia or videos when i am using it on battery or even if it is booted on battery. It works perfectly (so far) when i am powering it with adaptor. While using on battery, the windows normal sound would work fine but multimedia songs or videos sometimes work and most of the time do not work. i've tried to fix this while gone through all possible options. Even the F11 mute botton does'nt lit indicaing that sound for multimedia will not work now.
Please advise to overcome both the issues.
Thanks.
AftabFarid

Similar Messages

  • HP Pavilion dv6-6c29wm will not restore from disc that was made with HP recovery Manager

    My HP Pavilion dv6-6c29wm will not restore from disc that was made with HP recovery Manager
    Running Windows 7 64-bit on 650gb drive.
    Error: "The system media does not support this computer. You are not able to restore this system with the media."
    I'm about to order the recovery discs from HP and with any luck be able to bring this laptop back to factory conditionn with all the correct partitions and sizes after I format the hard drive.
    This question was solved.
    View Solution.

    Yes our recovery disks will return your unit to the factory state. All the software that came with the unit will be reinstalled. Whatever you added you will have to reinstall.
    I work for HP.
    Please click the White Kudos star on the left to say thanks.
    Please mark Accept As Solution if this resolves your issue.

  • How to restore a single Photo with time machine in Aperture 3 / iphoto?

    How to restore a single Photo with time machine in Aperture 3 / iphoto?

    Its been awhile since I used iPhoto, but I have done it.
    If I recall correctly this is how.
    In iPhoto open event that you need to restore the photo to ( the event that originally contained it )
    Then open TM it should show that same event and then go back in time until you find the missing shot
    Highlight the one you need to restore and tell TM to restore it.
    Good luck

  • Pavilion dv6 - the search for WLAN doesnt exist after installing windows 7 ultimate

    pavilion dv6 - the search for WLAN doesnt exist after installing windows 7 ultimate
    after installing windows 7 my computer only displays the LAN on my quicklaunch bar and I can even search for open WLAN networks =(

    Hi:
    You probably need to install the wireless card driver.

  • HT1339 how to restore an ipod classic with error 1415

    how to restore an ipod classic with error 1415 latest operating system

    Hey there beaver17
    How are you?
    Well, I have an iPod Classic, it gave me the error -1436 error and would not restore on iTunes.
    I did the following:
    My Boss (@work) has a fairly old iBook but it has OS-X, so I decided to give it a try and connected my iPod to it.
    The system showed a window telling me that the disk is not MAC formated and needs to be validated prior further action. Snce it is a Mac product, I thought "yeah, go ahead".
    It then opens the disk manager utility for the Mac and showed the disk. It's window has some tabs, one is to verify the disk, so I verified it. Guess what, it had some invalid clusters.
    Then I formatted the iPod to OS-X Plus file system (next tab to the right). After formating the iPod, I "ejected" the iPod and reconnected to my PC. The Windows iTunes found an iPod with Mac file system and asked me to restore it. As I clicked on the "restore" button, I crossed my fingers as this was the last resource I have.
    Finally, after the file extraction was done, it began to restore the iPod!!
    I'm so happy about being able to restore the iPod that I decided to share with all you guys this solution as it is the most usefull, in my opinion.
    Hope you can find someone with an iBook or a desktop Mac, so you can fix yours.
    If it works for you, make sure to share the tip!!
    Kind regards
    Salvador Rivera

  • How to make SAP B1 connection with Windows Sharepoint Service 3.0

    how to make SAP B1 connection with Windows Sharepoint Service 3.0 through asp.net web part code.. I get the security error when i run that web part......
    public bool ConnectToCompany()
                oCompany = new SAPbobsCOM.Company();
                oCompany.Server = "192.168.1.58";
                oCompany.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005;
                oCompany.CompanyDB = "SBODemoUS";
                oCompany.DbUserName = "sa";
                oCompany.DbPassword = "abc";
                //oCompany.UseTrusted = true;
                oCompany.UserName = "manager";
                oCompany.Password = "manager";
                oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English;
                oCompany.LicenseServer = "192.168.1.58:30000";
                int i = oCompany.Connect();
                if (i != 0)
                    return false;
                return true;
    protected override void RenderContents(HtmlTextWriter writer)
                if (conn.ConnectToCompany() == true)
                    writer.Write("Hello" + this.Context.User.Identity.Name);
    Edited by: bikalg on Nov 28, 2010 9:43 AM

    Hi.......
    Welcome to SAP Business One Forum.....
    Unfortunately this is the wrong forum you posted here.
    I would suggest you post it in SDK or System Administration Forum and definitely you get the solution and close this thread from here......
    Regards,
    Rahul

  • How to defrag & cleanup Satellite C650 with Windows 7

    How to defrag & cleanup Satellite C650 with Windows 7?

    Hello,
    Moreover I can suggest you to:
    1) Perform a regular disk error-checking (check this as an instruction http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors)
    2) Perform a virus scanning with an antivirus e.g. Microsoft Security Essentials
    3) Check you computer for performance issues and resolve them (go to Start => type 'Performance Information and Tools' hit Enter, in a new window on the left side click 'Advanced tools' and review the performance issues enlisted (if any).
    Good Luck!

  • I have take pictures from my ipad 4. How to download to my computer with windows operating system conneted through USB cable with out using internet

    I have take pictures from my ipad 4. How to download to my computer with windows operating system conneted through USB cable with out using internet

    Plug your iPad into your computer. THere may be a delay while it installs drivers but if you can see your iPad in windows explorer, use that to get to your photos.
    Click on your iPad and you should see a DCIM folder. Click thorugh that to find your photos.
    Windows explorer will see your iPad as nothing more than a digital camera, and that's the part you're trying to access.

  • In need of your assistance please, for HP pavilion DV6 7007tx

    Hello,
    I previously updated my bios into Insyde F.24 (see attached images) which was ok at first, but when i decided to update my graphics drivers to its manufacturers driver (Nvidia), I started to experience my HP Pavilion DV6 heating up whenever i play games.
    I often check and put my graphics setting to balanced in hopes to lessen the heat up a bit.  However as soon as i play or open up a game (Fable 3, mass effect 3 and others) the fans starts to spin wildly.  To prevent my notebook from overheating i decide to exit my game after 30 minutes of playing and let it cool down first and start again.
    I read some points that the update in Bios i made previously possibly has something to do with it, and am now asking your assistance if i can downgrade or roll back into my previous or original Bios.
    Would it possible to downgrade?   My current Bios version is Insyde F.24.  I also searched for a Bios update at HP website and found out the current version i should be running is F.0A.  Should i run this?  
    Any kind suggestion i must do?
    Kindly check my notebook info on below images.
    Thank you alll in advance.
    Regards,
    Edgar Duenas
    learning and adapting.......

    Hello,
    Is there not anyone whose kind enough to assist me on this?   Please do help for anyone who knows a countermeasure.  Thank you all in advance.
    Regards,
    edgarduenas
    learning and adapting.......

  • [pavilion g7-2116sr] How can I use amd driver with only integrated graphic?

     Radeon hd 7670m is disabled coz it's broken. Amd driver don't work. Windows use vgasave driver. How can i use amd driver with radeon hd7660g?
    P.S.  Sorry, my english isn't good(

    Hi @Leys 
    I see you are stilll unsuccessful installing the drivers as you get the blue screen.
    Here is a link to Computer Does not Start (Windows 7, Vista, XP) that may help.
    Here is a link to Testing for Hardware Failures (Windows 7, Vista) to determine if your graphic card is defective.
    If the graphic card fails, here is a link to the HP Pavilion g7 Notebook PC Maintenance and Service Guide. Please note page 9 or chapter 1 page 9 for a list of recommended replacement graphic cards.
    If the graphic card passes you may wish to consider doing a restore back to a known good time or a full recovery back to factory.
    Using Microsoft System Restore (Windows 7)
    Performing an HP system recovery (Windows 7)
    During the recovery process there is an option to backup your personal files to prevent data loss.  If you have not done one yet I suggest you do one now.
    Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
    At any time you may wish to contact HP support for assistance.
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • How can I  restore 2nd gen shuffle with windows 7

    How do I restore a 2nd generation ipod shuffle with windows 7?

    Never mind - somehow I got it to work.

  • My ipod touch is disabled, i installed the latest version of itunes, but cant figure out how to restore, can anyone help with this?

    My ipod touch is disabled, i installed the latest version of itunes, but cant figure out how to restore the ipod, can anyone help?

    If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
    First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
    At the command prompt:
    Type %windir%\system32\msiexec.exe /unregister and hit enter.
    Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
    Type %windir%\system32\msiexec.exe /regserver and hit enter.
    Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
    Restart the PC and try another reinstalll.

  • HT201250 How to Restore files on timemachine to windows pc?

    How to restore folders or files to a windows pc?

    Yes we can.
    Just restored my files from an external timemachine drive to my windows xp pc using macdrive 9 standard. Its free for 5 days trial.
    Could get all incremental backups since the last full backup in timemachine.
    Could not get the files in this full back up. But was not necessary for me.

  • How to restore Snow Leopard Mail with Time Machine?

    Is there a place that shows how to restore e-mail? Maybe to get an old e-mail and then to come back to the present - or to merge yesterday's e-mail and today's?

    That's exactly what I am saying. You do it just as I described in my first message.
    I am assuming you have Time Machine in your Dock or in the Menu Bar (or both). With Mail as the active application -- It says "Mail" in the Menu Bar next to the Apple menu -- and a Mail message list visible as the front window, click Time Machine. You should get message lists going back in time. Step back in time until you find whatever it was you want to recover.

  • How to restore deleted web clip with Time Machine

    I had a couple of nice web clips in my dashboard that I had to close to install new software. Now I want to restore them with time machine. How can I do that? Where are the files that contain the web clips? Which files to restore? I know it can be done because I once restored the entire system with time machine and got the web clips back as expected.

    restore the files homedirectory/library/preferences/widget-com.apple.widget.web-clip.plist AND
    homedirectory/library/preferences/com.apple.dock.plist and restart Dock by entering the following in terminal
    killall Dock

Maybe you are looking for

  • Unable to change component children properties in flex

    Hi, I have a component named PatientCanvas derived from Canvas <mx:Canvas xmlns:mx="http://www.adobe.com/2006/mxml" creationComplete="Alert.show(getChildren().length.toString())"> <mx:Script> <![CDATA[      public function showChildren():void{       

  • Add columns to EXCEL exported from ALV

    Hi, I'm using the function module REUSE_ALV_GRID_DISPLAY, to display an ALV report. This report shows a standard text when users click on one column. I wanna know if its possible to add the standard text as a column into the EXCEL exported from this

  • PHP Forums in DW Templates

    I have a client that needs a discussion Forum within its site. I am familiar with phpBB3 and I like it, but it does not integrate into site pages very well. Does anyone know of any other options that could perhaps have the forum pages put into a DW T

  • How to cancel inspection lot with REL status

    Hi Guru's,                  I am not able to close old process orders becuase of active inspection lots in the system, Error message is  "inspection lot doesnot have necessary data" . I could see there are lot many old inspection lots which are in RE

  • Creating Web Services from Forms Application

    I have a commercial system based on Oracle Forms 6. I would like to expose the functionality of this application as Web Services. This would permit us to integrate these applications using XML technology. I think the best approach would be to look fo