HP Pavilion dv6-7080se where download recovery disk

Hello
After repair at center was missing recovery disk at hard disk
where I can download recovery disk for HP Pavilion dv6-7080se?
thanks

Hi durani,
You're best option would be to order a complete replacement set of Recovery Discs using the link below.
Order HP Recovery Discs.
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • HP Pavilion dv6-7080se recovery error

    when i  run recovery a message apper to me and say :
    windows faild to start  a recent hardware or software change might be the cause to fix the problem :
    1 - insert ur windows instllation disc and restart ur computer
    2 - chosse ur language settings and then click next
    3 - click repair ur computer
    if you dont have this disk contact ur system adminstrator or computer manufacturer for assistance
    file : \boot\bcd
    status :0xc000000f
    info : an error occurred while attempting to read the boot configuration data
    to ur aknwolage
    the drive ot the recovery i see the data in it
    an the hidden drive hp tools i see it
    and i but a recovery in a flash memory and i cant boot from it and i see it as files not a revovery disk
    my operating system is windows 7 64 home prem my laptop HP Pavilion dv6-7080se
    what i can do to make my recovery work

    Hi durani,
    You're best option would be to order a complete replacement set of Recovery Discs using the link below.
    Order HP Recovery Discs.
    If you have any problem with this link, order them directly from HP.
    If you live in the US, contact HP Here.
    If you are in another part of the world, start Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Can I burn a copy of the downloaded recovery disk?

    can I burn a copy of the downloaded recovery disk?

    Yes, but it's better to burn the InstallESD.dmg that comes with the Install Mac OS X Lion.app. To burn the Recovery HD requires using Disk Utility to mount it. If DU can't see it, quit DU, run this command in the Terminal app:
    defaults write com.apple.diskutility DUDebugMenuEnabled 1
    then launch DU and select Show every partition from the Debug menu.

  • HP Pavilion dv6-6181TX. System Recovery is not working From HP Recovery Manager.

    HP Pavilion dv6-6181TX
    Product No. A3U49PA
    Genuine Windows 7 Home Premium 64
    (but i upgraded it to windows 7 ultimate)
    System Recovery is not working From HP Recovery Manager. so i cant restore my laptop to its original factory condition. (Genuine Windows 7 Home Premium).
    so when i restart my computer and press Esc and then choose F11 i get this message :
    "Windows failed to start. A recent hardware or software change might be the
    cause. To fix the problem:
    1. Insert your Windows installation disc and restart your computer.
    2. Choose your language settings, and then click "Next."
    3. Click "Repair your computer."
    If you do not have this disc, contact your system administrator or computer
    manufacturer for assistance.
    File: \Boot\BCD
    Status: 0xc0000225
    Info: An error occured while attempting to read the boot configuration data."
    i saw this from the forum
    http://h30434.www3.hp.com/t5/Notebook-Recovery/Hp-recovery-manager-problems/m-p/2395473/highlight/tr...
    Had the C partition been split/shrunk to form a new partition previously?
    Does disk management show the HDD as basic or dynamic? (Start>Right-click Computer>Manage>disk management on the left).
    If it has been switched to dynamic (Windows does this automatically when more than 4 partitions are present on the disk), then the F11 recovery partition won't function until it is restored to basic, but I would like to confirm that is the scenario before providing those steps.
    The Disk management shows that my HDD as Dynamic, what should i do then if this is the case and the possible solution to my problem?
    please help me & Thank you for your time,
    This question was solved.
    View Solution.

    If you have more than 4 partitions you will need to delete the extra partition/partitions, then convert the hdd back to Basic.
    Older versions of Partiton Wizard Free work: 
    http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Hp pavilion g6-2004tx.cant create recovery disk...plz help????

    i have purchased pavilion g6-2004tx  yesterday and today i was backing up the windows & got that it was saying"disk verification failed"....i cant even partition my drive please help as soon as possible....or please send me a set of recovery disk.

    Hi,
    I would recommend calling HP ( the telephone number can be found on the relevant link below ) and explain that the Recovery Media Creator is unable to create a viable set of Recovery Discs and request that they send you a free replacement set.
    If you live in the US, contact HP Here.
    If you are in another part of the world, start Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • SOLVED: HP Pavilion dv6-1355dx Windows 7 Recovery Partition Failed, Windows Partition Formatted

    Hello everyone. I just joined the community, so I apologize in advance if I am in the wrong place or if I do not supply all the needed information about my computer and problem in this first post.
    I have an HP Pavilion dv6-1355dx Entertainment Notebook PC, which came with Windows 7 Home Edition, and an HP Recovery Partition. Today, I decided I wanted to start from scratch, as the system was getting pretty slow, and the User folders were becoming very unorganized. So I followed the instructions found at the HP website and used the program HP Recovery Manager. However, after the Recovery Partition formatted the Windows Partition, and had three minutes left to copy the files into the new partition, a message popped up declaring the recovery failed, and the computer had to be rebooted. So now I have a computer with no operating system on it at all, and the Recovery Partition continues to fail. I have used the Recovery Partition before, and this has never happened.
    Has anyone encountered or know of a similar issue? Does anyone know a solution? Am I out of luck, or is there someway to ask HP for a copy of the installation media?
    Thank you in advance.
    EDIT: Never mind. I found a forum post with my answer. Sorry to anyone who spent the time to read this post.

    how did yiu fix this problem 

  • HP Pavilion dv6-7173er (Bootloade​r recovery)

    Greetings!
    I happened a problem with the recovery partition (F11 at startup click and nothing happens) .
    So, restored backup (Partition Recovery) created in Nero BackItUp, when you press the F11 recovery system booted from C:\Windows.
    Recovered from the boot loader, but not that which is necessary !
    Now when you press F11 on the target operating system launches .
    How to recover a record store(MBR) BCD and BOOTMGR?
    Another problem with the HP Recovery Manager (writes recovery disk removed and roll back to the original system is no longer available).
    But this has been changed ! Section Recovery and HP_TOOLS active and created.
    Translated using Google translator since I Russian .
    Приветствую!
    У меня приключилась проблема с разделом восстановления (при запуске нажимаю F11 и ничего не происходит).
    Так вот, восстановил бекап (раздел Recovery) созданный в Nero BackItUp, при нажатии на кнопку F11 загрузилось восстановление системы из C:\Windows.
    Восстановился загрузчик системы, но не тот который нужен!
    Теперь при нажатии на F11 запускаеся целевая операционная система.
    Как восстановить хранилище записей(MBR) BCD и BOOTMGR?
    Ещё одна проблема связана с HP Recovery Manager (пишет диск восстановления удалён и откат к изначальной системе больше недоступен).
    Но это нетак! Раздел Recovery и HP_TOOLS активен и создан.
    Перевёл с помощью переводчика Google так как я Русский.
    This question was solved.
    View Solution.

    Hi Agregat,
    I can certainly understand how frustrating this must be for you. 
    Alright, let's tackle this another way. Follow the steps in this document for Create a system repair disc and see if we can create this disc.
    Once you have the disc created, then follow the steps in this document for Use Bootrec.exe in the Windows RE to troubleshoot startup issues to fix your Master Boot Record.
    I truly hope this works for you, I will be waiting for your reply.
    Good luck,
    I worked on behalf of HP.

  • HP Pavilion DV6 - problem with HP recovery - error 1005

    I'm trying to format the computer and reinstall windows.
    The laptop does not have a hard disk partition for the recovery. I'm using the DVD's that where made when I got the computer.
    I can open the HP recovery system and get about 36% in, before i get the message: "error 1005"
    I have tried several options that i could find on google like: cleaning the disc's, setting the BIOS to default, checking the disc's are DVD+R.
    Someone suggested that Wireless has to be turned on when using the recovery. Mine is turned off. I can't turn on the computer and switch it on, and the keyboard button (touch button) don't respond.
    Any suggestion on how to turn Wireless on, or how to fix the recovery?

    Hi,
    There may be a work around if you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
    If you have access to this, use the retail disc to perform the installation, enter the activation key found on the underside of your notebook when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this is fully supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software normally bundled with OEM installations.
    http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
    Any additional driver can be found starting Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Pavilion dv7-5003tx replace hdd recovery disks error code OxeOefoooe please help.

    have tried both recoveries hangs at 45% and goes no where

    Hi,
    One factor that can cause this error is replacing the original HDD with a drive of smaller capacity - if this is the case, recovery discs almost always fail to work correctly, however there isAssuming this is an alternative option you could try.
    Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
    An example of a COA Label can be seen Here.
    You can create a Windows 7 installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.  These Images are clean and from a well-respected source, however there are only limited versions available.
    Windows-7 sp1-iso-official-32-bit-and-64-bit
    Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
    http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
    Any additional drivers and software you may need can be found Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Cannot restore Pavilion dm4 using HP provided recovery disk

    I have a DM4 Pavilion that got virus infected. After evaluation, an HP technician suggested me on phone to restore system using restore dvd. HP sent me a set of 3 restore dvds along with instructions to turn on laptop, put in dvd 1 and then shut down laptop. then restart while pressing F11 so that i get the option to run recovery manager and use dvd to boot the laptop.
    But as i do these steps, nothing happens. the screen stays black and on bottom right hand side i see "f11.... system recovery" written. no recovery option starts for me to choose the dvd option even though i continue to press f11. i also tried pressing function key and f11 but no ersult. can someone please guide me on how to restore my laptop to factory settings?

    Hi,
    Try the following method.
    Shut down the notebook.  Tap away at the esc key as you soon as you press the power button to access the Start-up Menu.  Insert you 1st Recovery DVD.  Select the boot manager option ( usually f9 ).  Next, use the arrow keys to select the CD/DVD drive and hit enter.  You may also need to press 'any key' to confirm booting from the CD/DVD drive.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP Pavilion dv6 1328sl, bios says : hard disk not exist !

    Good morning,
    the bios says that the hard disk not exist. Still, if I boot the PC from CD with Linux, the files on the disk c can be seen .. I deleted the partition but the problem remains!
    does anyone know how to access the advanced menu of the bios? It's an "Insyde"  f36. I want to see if there is something wrong option ...
    Thanx

    Try a hard reset, works sometimes.Disconnect all external devices first.
    1-remove power cord and battery
    2-press power button for 30 seconds
    3-reinstall only power cord for first startup.
    4-power on
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • NB100 - Where can I download the recovery disk?

    Where can i download RECOVERY DISK FOR A nb100?

    Hello
    The recovery disk cant be downloaded!!!
    If you want a new recovery disk you should order a new one from Toshiba directly. If you check the user manual, you can find the direct link to the shop.
    Anyway, here you can order it: https://backupmedia.toshiba.eu/
    Greets

  • HP Pavilion dv6-1030 recovery

    I bought a recovery disc set 1 and 2 for a HP Pavilion dv6-1030us. After recovery, my windows vista keeps asking me to enter the product code and a message that says that my copy of windows is not genuine.

    The recovery set checks the PC for various hardware that was supposed to be part of that model.  If it finds something different than the preassigned configuration, it will not finish.  If the PC is really a dv6-1030us, you could use the product key from the sticker on the bottom of the laptop.
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • Product number: B1N25EA#ABV I need recovery disk

    please I need recovery disk because I lost my recovery disk

    This is NOT official HP Customer Support and I, as most other persons on this forum, do not work for HP. This is a peer-to-peer user supported forum for HP consumer class products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Any reply from a HP employee represents their own opinion and not that of HP's.
    Here are the specs for your HP Pavilion dv6-7080se Entertainment Notebook Computer. Here is the HP Pavilion dv6-7080se Entertainment Notebook PC Drivers page for your computer. Please contact official HP support in your region / country via the HP Worldwide Support Portal to see if HP Recovery Discs are available for your computer.
    If you have any further questions, please don't hesitate to ask.
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Blue screen with error code and I have no recovery disks for HP Pavilion dv6-1260se

    I have a HP Pavilion dv6-1260se with factory installed operating system of Vista. When booting up the computer, I receive a blue screen with this error message: STOP:  c000021a {Fatal System Error}.
                                                                The verification of a KnownDLL failed.  system process terminated unexpectedly with
                                                                 a status of 0x0000221  (0x007fb9c0  0x00000000).
                                                                 The system has been shut down.
    I do not have recovery disks for this computer.  I tried to order them but them seem to not be available.  This is my daughter's computer.  She says she started to have trouble after downloading Frost Wire (music share) and then she removed it.  We tried going back to an earlier time and that didn't help and then the blue screen with error message appeared. What do I do now?
    This question was solved.
    View Solution.

    Hi,
    Assuming your in the US, recovery discs are available to order for that model here.  That may be the best option.
    You should also be able to do a recovery without the discs as well.  Take a look at this document: Recover Windows Vista Operating System Using HP Recovery, and look for the section Restore the PC to its original condition with the HP Recovery Manager if Windows Vista is not accessible.  This should allow you to recover the PC.
    R
    Although I am an HP Employee, I am speaking for myself and not for HP.

Maybe you are looking for

  • Error Code 39

    I have a computer with a code 39 error and need some help. The CD and DVD rom was not working in my computer when the os starts the device manager sees drives but is unable to access it. Can anyone help me?

  • My iPod keeps freezing during the middle of songs etc.?

    My iPod keeps freezing in the middle of songs and even when i plug it into the computer to charge. I've tried to restore it but iTunes rejects it, saying that it has an error. what can I do?

  • How to hold the government's stock under our location

    Hi All, We have a scenario where in we need to hold the stock of some government's material in our plant /warehouse. The government agrees to pay for the storage for whatever period of time we need to . What I want to know is 1. Though the stock is a

  • 1230AG non-root bridge not associating

    Hello everyone, I am new at setting up root and non-root bridges. I am trying to set-up three 1230ag devices. One as the root and the othe two as non-root, I copied the config txt from the root and copied that into the two I am going to use for the n

  • How do I put a Halo on someone in Imovie

    How do I put a Halo on someone in Imovie?