Hp pavilion dv6 backspace and enter keys are not responding

In my hp pavilion dv6 2158ee system backspace and enter keys are not responding.

Hello pvz,
Please take a look at this document and let me know if the troubleshooting steps help resolve your issue of certain keys not functioning correctly.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

Backspace and enter keys are not working

I have a Pavilion DM4 1200 CTO lapotop running on Win 7, 64 bit OS. Suddenly I see backspace, Enter, slash,up and down keys have become dead. Tried reinstalling keyboard drivers and BIOS update, but no luck. Any help will be appreciated.

I have a Pavilion DM4 1200 CTO lapotop running on Win 7, 64 bit OS. Suddenly I see backspace, Enter, slash,up and down keys have become dead. Tried reinstalling keyboard drivers and BIOS update, but no luck. Any help will be appreciated.

"backspace", "g" and "h" keys are not working.

hello,
my laptop is HP 450 and windows 7.it is one years old. i haven't spilled anyting on it or damaed it in anyway i can think of.
suddenly the "backspace" , "g" and " h " keys are not working.
please help me, because i have to complete my university assignment as soon as possible.
tank you,
shehara

Hi,
While this could be a hardware issue, it's always worth trying the following.
Open windows Control Panel, open Device Manager, expand Keyboards, right click the entry 'Standard PS/2 Keyboard' and select Uninstall.
Shutdown the notebook.
Then unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f9 to load the defaults ( this is sometimes f5, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Hello, my backspace and enter keys suddenly stopped working. I have done a PRAM reset and used the keyboard viewer to see if the buttons work and they don't. The PRAM reset didn't work either

Dear All, the backspace and enter keys on my wireless keyboard suddenly stopped working. Im using OS 10.7.5 and have tried a PRAM reset which didn't work. I also used the keyboard viewer to see if the keys worked on that but they don't. This is driving me mad, can anyone please tell me what to do? It happened just after an update but this could be a coincidence. Thank you for your time

For my computers, though some of them support BlueTooth devices and accessories,
my preference and economy of standard, is to have wired USB and also use powered
USB hubs for accessories.
I've used USB wired keyboards and mouse products; and some I've bought from the
original owners who had upgraded to BT, and never used the new Apple USB model;
so I have spares of these on-hand since they seldom fail, but do work when BT won't.
{A SMC reset should not cause a problem, or seldom has; but can solve some.}
In my opinion, the wired USB keyboard is an essential accessory, if not a necessary
primary means of user access on a continuous basis. At least until the wires fail...!

Dv6 2190us - some keyboard keys are not working

Hi there all,
My sis bought me Dv6 2190us laptop last Feb 2010 and I just got it now. The problem now is, some of the keys like the letters - W, S, and X are not working so I am not able to log-in to Window 7. The laptop is brandnew, the keys are not sticking but the only unusual thing is that , the battery was attached to the laptop for one year.... Couldnt this be the reason and what should I do to resolve this? Appreciate your kind help!
Thanks in advance,..

also having this issue with 6 month old dv6 3031 but my entire line beginning with a to enter key will not respond so i cannot do any tests or what not. i was advised to do bios setup by clicking F10 when notebook is booting up, arrow across to Diagnostic menu and perform PRIMARY HARD DISK SELF TEST. of course i was unable to do this as my enter key does not work but maybe you could give it a go and have more luck
cheers

LEDs on caps lock, sound and wireless keys are not blinking any more

I have Pavilion g6 2103 tu notebook with windows 8 OS. The LED s on the caps lock , wireless and sound keys are not blinking for few days. can any one have the solution please?? thanks

Hi @rajiv29
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I saw your post regarding the LEDs not blinking on your Pavilion. Is there something else wrong with your Pavilion or just that those lights do not come on?
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

HT4818 my zero and nine key are not working

my zero and nine key are not working and also //////// symbol sometimes keeps repeating

Try an external keyboard. If it works, you need a new internal keyboard.

My "caps lock" key and "P" key do not respond on my 2009 macbook pro unibody

I recently bought a used macbook pro for university. When I bought it the guy who had it before me was running windows 7 on the machine. (why ruin a mac with windows software? I have no idea) I love macs and everything about them so I decided to wipe the hard drive clean and run OSX like any other normal mac user... well now the "caps lock" and "P" keys do not respond at all!!! I've checked my keyboard settings and keyboard and character viewer and its only those keys that do not respond!! Any ideas how I could reset the hardware? (I have a feeling he had to configure the keys to windows software) And yes, I did see the keys work when I bought it!! Does anybody know apples policy on applecare? like what would I need to bring in to redeem it? (I know this computer is warrantied until 2013)

I got the exact same roblem- you can see that, "p" missing in the word problem.
And Caps lock doesn't work either.
A few hours ago, I had problem with Shift keys. They were stuck, I don't know which one but everything would be capatalized and minimizing windows would be very slow. Then the repairman at a Mac Support center (authorized reseller, no Apple stores here) took off the back cover and cleaned a small chord or something and the Shift problem vanished and this one appeared. The guy thinks it's related to keyboard- must be!- and I need to change it. Could there be any other option?
ps: I copied and pasted all the 'p's in this piece.
MacBook Pro, Mac OS X (10.6.8)

While notes, reminders and calendar are working fine, keynote (beta) and pages (beta) are not responding, they are sticking. What should I do? I would appreciate help. Thank you.

while notes, reminders and calendar are working fine, keynote (beta) and pages (beta) are not responding, they are sticking. What should I do? I would appreciate help. Thank you.

Unfortunately, most of my advice is in the "hindsight is 20-20" category.
First off, I would never have purchased the peripheral accessories until the 14 day return period had expired. Second, you learned the hard way what the "14 days" really means.
Too bad you didn't do any homework, reading this and other forums and tech sites. Even word of mouth from others. That, more than anything could have steered you towards different phone choices from the get-go and I will leave that there with no further comment other than to say most of the issues you described have been discussed in this forum, ad nauseam.
Once you got into the refurbished phone exchanges, that is where things really went haywire. What someone tells you over the phone is a sketchy proposition, and when it comes down to it, it's your word against theirs.
I think Verizon tried to make it right, though. Remember, they don't make the phones. Don't throw the baby out with the bathwater.
You stated yourself you were a satisfied Verizon customer before this. Had the first two phones performed as they should, you would still be a satisfied Verizon customer.
Doubt any of that will make you any happier, but after you went through the effort of writing such a long post, I thought I'd try.

Satellite C50-A-15Q - arrow, question mark key and z key are not working

I have a Satellite Pro, C50-A-15Q. All keys were working fine yesterday, today I turn the laptop on and the arrow keys, question mark key and z key are all not responding. Any idea how I can fix this?
I have tried turning the laptop off and on, hoping (naively) that this would fix, but to no avail.

As Tom already wrote, it is not easy to say for sure if this malfunction is result of defective keyboard or maybe keyboard controller. In my opinion troublemaker is the keyboard itself.
Have you maybe updated BIOS or done anything that could be responsible for this?
I presume your notebook is pretty new model with valid warranty so best option for you is to contact nearest Toshiba service provider and ask for help.

My O, L, and '.' keys are not working!

I have a question. I have a PowerBook G4, 1.5 GHz, Aluminum. Recently, my "o", "l", and "." keys are working intermittently. Half the time, they do not work. This is not a software problem as I have an external keyboard. Does anybody know what's going on??? I don't.

Sounds like a cracked trace on the keyboard PWB. Best to just replace the keyboard. You might get more information at this link:
http://www.powerbookmedic.com/Powerbook-Keyboard---G4-Aluminum-p-16506.html
Replacement can be a bit involved:
http://www.ifixit.com/Guide/Installing-PowerBook-G4-Aluminum-15-Inch-1-1-5-GHz-K eyboard/223/1
In this case, the Titanium models have the Aluminum models beat, as replacing a Titanium keyboard is a 2-3 minute process, tops.

Qosmio G40 hangs and some programs are not responding

Hello and happy holidays to all.
Please could i get some help with my G40?
The pc is hanging and refusing to work.
Ccreens lock and i get constant messages that the program(s)are not responding.
I have run all checks i could find, chkdsk in cmd prompt, defrag etc. There are no problems reported.
I have used system mechanic professional to check registry and everything else, again nothing that is not to be expected was reported.
I have run every virus and malcious software test.
I think i would like to restore the pc to factory settings but cannot find any option to do so.
Any ideas
stafford

Hi!
If you want to restore the notebook to factory settings and you have Vista, you must boot from the recovery disks or press F8 at startup and then choose Repair my Computer and follow the menu instructions.
If you have Windows XP, you need the recovery disks.
Before you do this, backup your data first. The HDD will completely erase.
I think also its the best way to reinstall Windows but you should also check if you have the newest BIOS:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Bye

Safari is repeatedly crashing and web pages are not responding

So, my safari is constantly freezing (the spinning wheel of death shows up) and then I'm told that the web-pages are not responding and I need to force reload them all. And this can repeat a number of times; a full system re-start is the only fix.
Any fixes, solutions would be appreciated.
I'm using Safari 5.1.9; and Mac OS X 10.6.8

MIght be third party plugins causing Safari to freeze.
Try the troubleshooting help here > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
And see if you can do this before Safari freezes.
Launch Safari and immediately press Command , (comma) to open the Safari Preferences pane then select the Extentions tab.
If there are any extensions installed, turn that OFF, quit and relaunch Safari to test. If Safari doesn't freeze, uninstall one extension at a time, quit and relaunch Safari to test again.

My keyboard and track pad are not responding

My keyboard and track pad are not responding

Hello apecchia,
Thanks for using Apple Support Communities.
In attempt to resolve this issue, please try and reset your SMC by following the article below.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Take care,
Alex H.

Lost my iPad and when I attempt to use the "LOST" feature in icloud, the NEXT and CANCEL buttons are not responding. I have tried this on 3 different windows based computers. Any ideas???

When using icloud because I lost my ipad...when i attempt to use the "LOST" feature the "next" and "cancel" buttons do not respond. I have attempted this on 3 different windows based computers on 3 different networks. Any ideas?

Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
 Cheers, Tom

Hp pavilion dv6 backspace and enter keys are not responding

Similar Messages

Maybe you are looking for