HP Pavilion DV6 - problem with HP recovery - error 1005

I'm trying to format the computer and reinstall windows.
The laptop does not have a hard disk partition for the recovery. I'm using the DVD's that where made when I got the computer.
I can open the HP recovery system and get about 36% in, before i get the message: "error 1005"
I have tried several options that i could find on google like: cleaning the disc's, setting the BIOS to default, checking the disc's are DVD+R.
Someone suggested that Wireless has to be turned on when using the recovery. Mine is turned off. I can't turn on the computer and switch it on, and the keyboard button (touch button) don't respond.
Any suggestion on how to turn Wireless on, or how to fix the recovery?

Hi,
There may be a work around if you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you have access to this, use the retail disc to perform the installation, enter the activation key found on the underside of your notebook when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this is fully supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional driver can be found starting Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

No tuner hardware detectet- HP Pavilion dv6-1244tx with Integrated TV Tuner

i bought HP Pavilion dv6-1244tx with Integrated TV Tuner.
When i go to Windows Media Center->TV+Movies->set up tv receive the folowing message:
"The TV signal cannot be configured because no tuner hardware was detected..."
Same think with HP Media Smart-when clicking on the tv icon the message is: " No TV Tuner Device.
No TV Tuner card detected. Please check your TV tuner card or add one to use this program."
My questions are:
1.Sinnce the model HP Pavilion dv6-1244tx comes with Integrated TV Tuner Is it normal to receive the above messages when trying to set up tv?
2. Do i need to install additional drivers or to buy additional hardware to be abble to to set up tv?

the message no tuner detected is a problem with windows media center. If you try other software you will see that the tuner is working!
I am currently on with Microsoft tech support level 2 ? they are now on their second day trying to fix my computer
my computer is a pavillion m8187c and after 6 months of supurb service the "no tuner" message appeared. I have done everthing suggested on the HP help site but to no avail. downloaded drivers for the tuner card from everywhere including toe original drivers from drive D. I also went to services and restarted the services which are windows media center. I then saw that windows 7 has more controls available to the user in wmc. so I upgraded to windows 7 which gave more drivers and software. BUT WMC still indicated no tuner. So then I went out and bought a new tuner, no it didn't work either
Over the last two days I have watched the Microsoft technician retry everything that I had tried and it is still not working.
we may try to use the more extream upgrade. I just upgraded my system with windows 7, so we may have to do the install where the Drive C is formated and the clean operating system is installed. who knows the technician from microsoft is still researching
by the way HP stopped any support when I upgraded to Windows 7 because I did not buy the upgrade from them, I got it at wallmart
so if you want it to work call microsoft support at 800-642-7676 plan on spending some time

Problem with Rescue & Recovery

Hi!
I have a X61 running on Vista Business. I am facing 2 problems with Rescue & Recovery:
1. RR tries to run a backup on every bootup even when I schedule it to run Monthly or Never. The program appears not to register the changes to the backup schedule. I upgraded to the latest version of RR, but it didn't help. (Note: Another user posted about the same problem (http://forums.lenovo.com/lnv/board/message?board.id=Special_Interest_Utilities&thread.id=604) some months back, but his problem hasn't been solved.)
2. Whenever RR tries to perform a backup, I get this error message: "R2R.exe has encountered a problem and needs to close." I downloaded the patch KB917422 but got the following message when I ran the installation pgm: "Could not find any previously installed compliant products on the machine for installing the product."
Will greatly appreciate any advice!
Puckers

First you should try to fix the bad sectors, you can use the following command:
chkdsk c: /f /r

Problem with DMGs and error: "No Mountable File Systems"

Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaia

Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

Hello chae84swangin,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

HP Pavilion dv6-7173er (Bootloader recovery)

Greetings!
I happened a problem with the recovery partition (F11 at startup click and nothing happens) .
So, restored backup (Partition Recovery) created in Nero BackItUp, when you press the F11 recovery system booted from C:\Windows.
Recovered from the boot loader, but not that which is necessary !
Now when you press F11 on the target operating system launches .
How to recover a record store(MBR) BCD and BOOTMGR?
Another problem with the HP Recovery Manager (writes recovery disk removed and roll back to the original system is no longer available).
But this has been changed ! Section Recovery and HP_TOOLS active and created.
Translated using Google translator since I Russian .
Приветствую!
У меня приключилась проблема с разделом восстановления (при запуске нажимаю F11 и ничего не происходит).
Так вот, восстановил бекап (раздел Recovery) созданный в Nero BackItUp, при нажатии на кнопку F11 загрузилось восстановление системы из C:\Windows.
Восстановился загрузчик системы, но не тот который нужен!
Теперь при нажатии на F11 запускаеся целевая операционная система.
Как восстановить хранилище записей(MBR) BCD и BOOTMGR?
Ещё одна проблема связана с HP Recovery Manager (пишет диск восстановления удалён и откат к изначальной системе больше недоступен).
Но это нетак! Раздел Recovery и HP_TOOLS активен и создан.
Перевёл с помощью переводчика Google так как я Русский.
This question was solved.
View Solution.

Hi Agregat,
I can certainly understand how frustrating this must be for you.
Alright, let's tackle this another way. Follow the steps in this document for Create a system repair disc and see if we can create this disc.
Once you have the disc created, then follow the steps in this document for Use Bootrec.exe in the Windows RE to troubleshoot startup issues to fix your Master Boot Record.
I truly hope this works for you, I will be waiting for your reply.
Good luck,
I worked on behalf of HP.

"problem with shortcut/fatal error during installation" on other user accts

I-tunes installed and works with no problem in original user, but when another user account attempts to open Itunes, program attempts to install/configure again, then results in a "problem with shortcut / fatal error during installation" message. Setting the other users to administrators doesn't help, nor does un-installing/re-installing, etc. I am at least the 4th person with this problem (see Burthomp earlier today,Jan. 17 and Richard 1018 on Dec. 29). This problem started with Itunes 7.5, and is still a problem on Itunes 7.6. I have a standard Dell setup, Model E510. There must be a lot of people with this problem. Apple, are you working on this? Anyone else have a suggestion?

I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you.

I am having a problem with my itouch error 3194 is displaying

I am having a problem with my itouch error 3194 is displaying

Hello there, spidermatt1.
The following Knowledge Base article offers up some troubleshooting recommendations for the very issue you're describing:
Error 3194, Error 17, or "This device isn't eligible for the requested build"
http://support.apple.com/kb/ts4451
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I am trying to get the free trial to cc but it said there seems to be a problem with the files (Error code: 205)

I am trying to get the free trial to cc but it said there seems to be a problem with the files (Error code: 205) please help

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

HP Pavilion dv6-7080se where download recovery disk

Hello
After repair at center was missing recovery disk at hard disk
where I can download recovery disk for HP Pavilion dv6-7080se?
thanks

Hi durani,
You're best option would be to order a complete replacement set of Recovery Discs using the link below.
Order HP Recovery Discs.
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP Pavilion dv6-6181TX. System Recovery is not working From HP Recovery Manager.

HP Pavilion dv6-6181TX
Product No. A3U49PA
Genuine Windows 7 Home Premium 64
(but i upgraded it to windows 7 ultimate)
System Recovery is not working From HP Recovery Manager. so i cant restore my laptop to its original factory condition. (Genuine Windows 7 Home Premium).
so when i restart my computer and press Esc and then choose F11 i get this message :
"Windows failed to start. A recent hardware or software change might be the
cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer
manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000225
Info: An error occured while attempting to read the boot configuration data."
i saw this from the forum
http://h30434.www3.hp.com/t5/Notebook-Recovery/Hp-recovery-manager-problems/m-p/2395473/highlight/tr...
Had the C partition been split/shrunk to form a new partition previously?
Does disk management show the HDD as basic or dynamic? (Start>Right-click Computer>Manage>disk management on the left).
If it has been switched to dynamic (Windows does this automatically when more than 4 partitions are present on the disk), then the F11 recovery partition won't function until it is restored to basic, but I would like to confirm that is the scenario before providing those steps.
The Disk management shows that my HDD as Dynamic, what should i do then if this is the case and the possible solution to my problem?
please help me & Thank you for your time,
This question was solved.
View Solution.

If you have more than 4 partitions you will need to delete the extra partition/partitions, then convert the hdd back to Basic.
Older versions of Partiton Wizard Free work:
http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

SOLVED: HP Pavilion dv6-1355dx Windows 7 Recovery Partition Failed, Windows Partition Formatted

Hello everyone. I just joined the community, so I apologize in advance if I am in the wrong place or if I do not supply all the needed information about my computer and problem in this first post.
I have an HP Pavilion dv6-1355dx Entertainment Notebook PC, which came with Windows 7 Home Edition, and an HP Recovery Partition. Today, I decided I wanted to start from scratch, as the system was getting pretty slow, and the User folders were becoming very unorganized. So I followed the instructions found at the HP website and used the program HP Recovery Manager. However, after the Recovery Partition formatted the Windows Partition, and had three minutes left to copy the files into the new partition, a message popped up declaring the recovery failed, and the computer had to be rebooted. So now I have a computer with no operating system on it at all, and the Recovery Partition continues to fail. I have used the Recovery Partition before, and this has never happened.
Has anyone encountered or know of a similar issue? Does anyone know a solution? Am I out of luck, or is there someway to ask HP for a copy of the installation media?
Thank you in advance.
EDIT: Never mind. I found a forum post with my answer. Sorry to anyone who spent the time to read this post.

how did yiu fix this problem

HP Pavilion dv6 problems

About a year and a half a go, I got a brand new HP Pavilion dv6. When I unboxed it, I found out the webcam and mic were fualty, the battery was fualty and so was the fan. I had it replaced free of charge. about a month later. Now, I am having problems with the moniter (the hinges on the left side are broken) the battery does not have the right capibilty (or something like that) for what it should be. The hard drive also had to be replaced. All I want is a working webcam and mic, but the laptop does not detect the webcam at all, and the mic sometimes works and sometimes doesn't. Any help to get them working would be real;y nice. Thanks.

Hello,
I see that you're having an issue with the webcam and internal Microphone. This could be either a hardware issue or software issue.
I would suggest using the program called recovery manager to recovery the webcam software and drivers.
Please follow this document which should guide you through the recovery manager. Go down to the section that says "Reinstalling the original webcam program that came with your computer"
Now, you will need to select the option that is circled in the picture.
Then you will need to select Cyberlink YouCam Software.
Once you recovery this you will need to restart the notebook. After restart please test the webcam out and let me know the outcome.
Now for the microphone, you will need to follow this document.
This document will guide you through a couple of steps to test the microphone out in windows.
Once you troubleshoot the microphone let me know if either issue gets resolved. If you have any more questions let me know.
THX

Hp pavilion dv6-1030us with windows vista 64 bit now upgraded to windows7 32 bit.

hp pavilion dv6-1030us originally with windows vista 64 bit now upgraded to windows7 32 bit. mic is unable to send sound in skype after upgradation.
This question was solved.
View Solution.

Hi,
Try the following.
First, uninstall Skype and when this has completed, restart the notebook.
When windows has reloaded, download and reinstall the Chipset driver Here.
When the installation has finished, restart the notebook again.
Let windows fully load, then download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45044.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery, plug in the AC Adapter and start the notebook.
Let Windows fully load, then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Reinstall Skype and see if the Mic now works Ok.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Satellite C50-A-19T problem with TOSHIBA Recovery Media Creator

When i try to make Recovery dvd with TOSHIBA Recovery Media Creator the burning fails.
I have Satellite C50-A-19T with TSSTcorpCDDVDW_SU-208DB_T cd/dvd-rw unit.
During burning process i get an error that say that is impossible read the file D:\ZZImages\ZZImages\install29.swm (the .swm file in error change with different attempts).
I marked the option to verify dvd after burning.
I tried a few times: i try make a single dvd (requires 3 dvd for complete recovery).
i try 2 times with verbatim dvd+r the fist try failed, the second succeeded with the same kind of support.
i try make dvd numb. 2. for two time with dvd-r and dvd +r support and it failed again.
On windows error report i find this error:
and this alert:
+ODD Firmware Update to fix problems with the Toshiba Recovery CD creator+
I see this solution by upgrading firmware for different models of cd/dvd-rw units
http://aps2.toshiba-tro.de/kb0/TSB9C02RP0000R01.htm
but not about the model I have.
i have:
TOSHIBA Recovery Media Creator version: 3.1.02.55065006
windows 8.1 x64.
there is a solution?
is a known problem?
thanks
Elena

> I don't have a free usb drive to test the usb mode.
I would recommend you to purchase an separate USB memory stick and to create the such recovery USB flash memory media.
Please check also this different procedure described in this Toshiba HowTO
[How to create a USB recovery media flash drive from recovery ISO images- or discs (DVDs)|http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm]
Feedback is greatly appreaciated

HP Pavilion DV6 - problem with HP recovery - error 1005

Similar Messages

Maybe you are looking for