Hp pavilion dv6 recovery system with win 7 dvd image not found

Hello everyone, I have a hp pavilion dv6 I going to restore the operating system win 7 that I previously saved in an image of the system in 2 DVDs. I need to restore the entire computer because I do not want to lose all installations made within a year , including software installations regularly purchased online which do not have the original CDs . I tried to go in :
1 - "Backup and Restore Computer"
2 - Control Panel and select the " Restore system settings or your computer "
3 - then " advanced recovery methods "
4 - next page select " Use a system image you created earlier to recover your computer "
5 - At this point it asks me to do a backup, but I do not care because the computer is pretty much with the factory settings as has just returned from assistance hp and after ignoring the message I restart the computer in recovery mode expecting to reinstall the system with the image .
After a series of steps at the time to reload the image from the second DVD that I had previously saved , the computer can not find even one image to be restored where am I wrong?
Thanks Acitano

Hi Acitano,
I understand you are having issue with restoring your computer. Here is a document on how to do that when windows 7 will not start normally.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01835735&lc=en&product=5218386&tmp...
Hope this helps.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

Hp pavilion dv6 recovery fails

hey everyone first post on the forum
i have an hp pavilion dv6 that came with 64 bit windows 7 home premium installed. i tried to dual boot Ubuntu with it and ended up overwriting windows. lots more story but i ended up calling hp and ordering recovery discs for my laptop. i then zeroed my hard drive and ran the 3 recovery discs. it prompted my supplemental disc which I inserted. all went well until the "setting up for first use"screen appeared. hp software began installing stuff the during the drivers part it comes up with recovery failed. i ran without the supplemental disc and it did the same thing. someone please help

Hi,
Before trying the following, make sure you can still read the 25 character Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
Assuming that this is just a problem with the Recovery process, there is a straight forward work around.
Create a retail installation disc yourself - just download the correct Disc Image ( this must be the exact same as the version you currently have ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found starting Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

LG - 1000W 5.1-Ch. Home Theater System with Upconvert DVD/CD Player

I have a question about the LG - 1000W 5.1-Ch. Home Theater System with Upconvert DVD/CD Player. Model: LHT854 | SKU: 8713859.
I plan on purchasing this here soon. i was wondering how long the wires are to the satellite speakers.the front 2 and center will not matter cause they will be right by tv. but the rear speakers i plan on concealing through part of my wall. i need to know how long the wires are so i can make this possible. is there anybody that can help me? its not in the specs

Unfortunately I do not know for sure but usually they provide anywhere from 25ft or 50 Ft per speaker. My JBL system came with 50ft of wire. You should be able to splice additional cable from the front and center to make them long enough if they are not already or pickup some extra speaker wire.

Backend System with Release 701 are not supported

SRM 5.0
Extended Classic Scenario
CCM 2.0
When updating the vendors in SRM system using TC - BBPUPDVD getting the below error message :-
Backend System with Release 701 are not supported
Have checked in table - BBP_BACKEND_DEST, the backend entry is properly maintained.
Can any one advice.
Regards,
Jayoti
Edited by: SAP jayoti on Dec 7, 2010 1:11 PM

The problem is resolved for vendor relication after applying the below notes 1313972 and 1372175.
ECC sandbox seems to be in 701 release. When the backend system ECC is in release 701, vendor replication fails with the error message that 'Backend system release 701 not supported'. We need to apply notes 1313972 and 1372175 to fix this issue. I have applied them in Sandbox and the issue is resolved now.

BBPGETVD - error:backend systems with release 700 are not supported

Hi,
When I am trying to replicate vendor data from EEC to crm 4.0 via BBPGETVD.
I get the error message"backend systems with release 700 are not supported"
Is anyone have Idea what is wrong? and how can fix it?
Thanks,
Rachel

Yossi,
I believe that standard transaction does not work with ECC 6.0. The standard response would be to upgrade your CRM system to 5.0 so that you can download vendors from ECC 6.0.
Bascially the vendor replication programs in CRM below 5.0 aren't really that reliable for delta downloads(one error will cause an entire load to fail). So you probably at best should copy the SAP standards to generate custom load programs as a starting point.
It is not too difficult and overcomes some of the restrictions that SAP puts in place(i.e. you can only use one number range for vendors downloaded, etc.). This is definitely one of the weak points of CRM 4.0 that was fixed in CRM 5.0.
If you have more questions on this let me know.
Take care,
Stephen

'Backend systems with Release 701 are not supported'

while BBPGETVD transaction is run below error is seen,
'Backend systems with Release 701 are not supported'
Please help to resolve it.

Hi
What is your backend system ECC version?
What is the configuaration in Define back end system?
Note 1313972 - BBPGETVD: Backend system latest release not supported
br
muthu

"Backend systems with Release 701 are not supported " - ECC 6.0 to SRM 5.0

Hi ,
I have 2 doubts .
1. We are getting Error "Backend systems with Release 701 are not supported " while replicating vendors from ECC 6.0 backend system to SRM 5.0 system.
There are some notes on simillar topic but are not for SRM 5.0 ,suggested on SDN. an anyone please suggest what need to be done for the same.
2. Can we replicate Vendor Master Data with Contact Person from SRM to ECC system ? if yes, How ?
Regards
Narendra

answer 1:-
Note 1372175 - BBP_VENDOR_GET_DATA_JOB "Back-End Systems Not Supported"
On recent upgrade of the ECC back-end system to release '701' the program BBP_VENDOR_GET_DATA_JOB is getting errored out. If you are using SRM 5.0 , SRM_SERVER 550 with ECC backend Release 701 you encounter the above reported problem
Other terms
Vendor Replication Job, Release 701, Backend not supported, BBP_VENDOR_GET_DATA_JOB
Reason and Prerequisites
The program does not consider the release 701
remote_release EQ '700' OR remote_release EQ '701'.
OR
bbp_vendor_get_data - DEBUG what ois the remote_release 700 or 701?
Muhtu

BBPGETVD throwing an error -Backend system with release 701 are not support

Experts,
After changing the Backend connection from R3 4.6c to ECC6 sysem in our BBPCRM4.0,
the transaction "BBPGETVD" is not working, which is throwing an error as
"Backend system with release 701 are not supported".
Already we have applied some of the notes (822883 &862290)
Thanks
Ahamed

Are you able to replicate other data like plants, product categories from the same backend system or are you facing the same error?
Also please check the logical system and see if they are assigned to the client correctly. (in SPRO settings)
Thanks,
Prashanth

System Error Message CR082-Work center with ID 10000005 was not found

Hi SAP Gurus,
We are getting the error message 'Work center with ID 10000005 was not found' while our finance guys trying to do costing run for our two plants together. But when they run the costing for two plants seperately then it is working fine. Because of the business needs they have to do the costing run for both plants together.
"The description of the error is as follows:
System error: Work center with ID 10000005 was not found
Message no. CR082
Diagnosis
Internal error.
Procedure
Repeat the transaction.
If the error occurs and you have a CRM System connected to your ERP System, the document may have been archived in the CRM System.
If the error occurs again, inform your system administrator. If the error cannot be corrected, call the SAP Hotline directly. Describe which steps preceeded the error"
Any idea how to solve this issue.
Thanks.
Sachin

Hi,
Kindly check with following SAP note for Message No. CR082 :
[Note 157682 - Message CR082: Work center not found|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=157682]
Try with implementing this note which may resolve your problem.
Hope this helps.
Regards,
Tejas

Windows 7 install stops at "CD/DVD driver not found"

When trying to install Windows 7 with boot camp, all goes well until it stops and gives me the "CD/DVD driver not found". I have a mid 2010 Mac Pro with a 500 GB SSD drive. I have burned a DVD at 1X from a iso file.
Thanks

Can you verify the MD5/SHA1 of the DVD with the ISO using OS X 'openssl md5' or the M$ FCIV tool? The source of your ISO should be able to provide MD5/SHA1.
OS X Example
openssl md5 ~/Desktop/GRMCPRXVOL_EN_DVD.cdr
MD5(/Users/MyName/Desktop/GRMCPRXVOL_EN_DVD.cdr)= 977f4f0f1400be91855789213e07b031
Windows FCIV example
D:\>C:\"Program Files (x86)"\FCIV\fciv
// File Checksum Integrity Verifier version 2.05.
Usage: fciv.exe [Commands] <Options>
Commands: ( Default -add )
        -add    <file | dir> : Compute hash and send to output (default screen).
                dir options:
                -r       : recursive.
                -type    : ex: -type *.exe.
                -exc file: list of directories that should not be computed.
                -wp      : Without full path name. ( Default store full path)
                -bp      : specify base path to remove from full path name
        -list            : List entries in the database.
        -v               : Verify hashes.
                         : Option: -bp basepath.
        -? -h -help      : Extended Help.
Options:
        -md5 | -sha1 | -both    : Specify hashtype, default md5.
        -xml db                 : Specify database format and name.
To display the MD5 hash of a file, type fciv.exe filename
D:\>C:\"Program Files (x86)"\FCIV\fciv -add Windows8.1-64bit.cdr
// File Checksum Integrity Verifier version 2.05.
f104b78019e86e74b149ae5e510f7be9 windows8.1-64bit.cdr

The request failed with HTTP status 404: Not Found

Hi
BPC version we are using is : 5.0.502
When we Publish all reports using the steps below:
a. Log into BPC Web
b. Click on Available Interfaces> Select BPC for Administration
c. Under Web Admin Task Click Publish Reports
d. Select all of the reports and click the green check mark to publish the
reports.
I am getting following message 'System.Exception: The request failed with HTTP Status 404: Not Found. Event log relation to this error is given below.
Event Type:     Error
Event Source:     OutlookSoft log
Event Category:     None
Event ID:     0
Date:          12/8/2008
Time:          11:26:42 AM
User:          N/A
Computer:     BPCAPP
Description:
==============[System Error Tracing]==============
[System Name] : OSoftCPM
[Message Type] : ErrorMessage
[Job Name]     : AuditMgrService/SetAuditReportFiles
[DateTime]     : 12/8/2008 11:26:42 AM
[UserId]       : MMPlanning
[Exception]
    DetailMsg : {The request failed with HTTP status 404: Not Found.}
==============[System Error Tracing End ]==============
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.
We tried ' Publish all reports' as the resolution of error 'object variable or with block variable not set' on modifying an application as per sap note Note 1131320
If anyone knows the resolution for the above issue, please help me.
Thanks in advance
Sajeev Abraham

Hi
Thanks for the response.
Below are the full contents of the error message pop-up.
( System.Expection: the reguest failed with HTTP status 404:Not found at
Microsoft.Visualbasic.CompierServices.lateBinding.LateGet(Object o, Type,String name, Object
[]args,sTRING[]paramnames, Boolen[]CopyBack)
at OSoft.Services.WebServices.ReportmanageProxy.ReportManageProxy.SetPubishReport(String strAppSet,string
strApp,string strFiter)
url is given below
http://<HostName>/osoft/Admin/WebAdminMain.aspx
BPC Deployment is Multiple server ( Two servers) Database and Application deployed seperately.
Sql Reporting server is working.. I could connect using sql management studio.
Thanks

Error: on clicking Registry menu item in ESM Management Portal. The request failed with HTTP status 404: Not Found.

Hi,
I have installed ESB Management Portal successfully after following all the steps. everything is working fine except when I click the Registry menu in the portal. I get an unhandled exception. The event viewer shows the below error "The request failed
with HTTP status 404: Not Found."
================================================
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 1/27/2015 5:56:10 PM
Event time (UTC): 1/27/2015 5:56:10 PM
Event ID: f7aedd39118845b79c17d3442a0d15a7
Event sequence: 54
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/ESB.Portal-1-130668549484455107
Trust level: Full
Application Virtual Path: /ESB.Portal
Application Path: C:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\
Machine name: <Machine Name>
Process information:
Process ID: 4712
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
Exception type: TargetInvocationException
Exception message: Exception has been thrown by the target of an invocation.
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
The request failed with HTTP status 404: Not Found.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Practices.ESB.Portal.UDDIService.UDDIService.GetCategoryByName(String UDDIServerUrl, String tModelName) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Web References\UDDIService\Reference.cs:line
575
at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.getBTEndpoints(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
553
at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.GetEndpointsByApplication(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
46
Request information:
Request URL: http://localhost/ESB.Portal/uddi/uddi.aspx
Request path: /ESB.Portal/uddi/uddi.aspx
User host address: ::1
User: <domain>\<user>
Is authenticated: True
Authentication Type: Negotiate
Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
Thread ID: 19
Thread account name: NT AUTHORITY\NETWORK SERVICE
Is impersonating: False
Stack trace: at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
=================================
Any idea why this is happening and what needs to be done ?
PLEASE HELP
Thanks & Regards
Vikram

Snippet from the link below:
If you get a “404: Not Found” error, it ‘s because by default there is no script map for .svc file with default IIS 7.0 installation, so you need to register .svc extension in IIS:
You need to update IIS script maps to register .svc extension In a command prompt (ran as administrator), execute the following command:
“%windir%\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe” -r -y"
Refer:
https://dgoins.wordpress.com/2010/05/01/esb-toolkit-management-portal-installation-notes-from-the-field-2/
Sarvanan's blog around this with detailed explanation:
Configuring Exception Management Portal
As mentioned above also
Check Portal Configuration Settings
Rachit
Please mark as answer or vote as helpful if my reply does

System property 'primavera.bootstrap.home' not found error while starting P6 application via managed server

Hi All,
I had installed P6 8.3 with weblogic 10.3.6.
My Adminserver is running.
But when i am starting my managed server P6, P6 server is getting started but P6 application is failing to start and giving above error.
but my p6help web application is showing Active state.
I added below line in startWeblogic.cmd and setDomainEnv.cmd file but no use.
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dprimavera.bootstrap.home=C:\P6EPPM_1\p6\
I tried by redeploying p6 application but still same error.
Please help.

Hi,
I has set the classpath as well same as above.
If i start managed server manually or using start_primavera.bat, P6 application is becomeing acive and working.
But if i start managed server using windows service, Managed server is get started, p6help is also becoming active but only p6 is failing to start.
If i chek the log it is showing same log below,
[Wed Oct 30 16:08:53 2013] [I] [RunJavaApp] Locating method "public static void main([]String)" in main class
[Wed Oct 30 16:08:53 2013] [I] [RunJavaApp] Building arguments for main class
[Wed Oct 30 16:08:53 2013] [I] [RunJavaApp] Invoking main class
<Oct 30, 2013 4:08:54 PM IST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Oct 30, 2013 4:08:54 PM IST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Oct 30, 2013 4:08:54 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.45-b01 from Sun Microsystems Inc.>
<Oct 30, 2013 4:08:55 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<Oct 30, 2013 4:08:56 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Oct 30, 2013 4:08:56 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Oct 30, 2013 4:08:56 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\Primavera\servers\P6\logs\P6.log is opened. All server side log events will be written to this file.>
<Oct 30, 2013 4:08:57 PM IST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Oct 30, 2013 4:08:59 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Oct 30, 2013 4:08:59 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Oct 30, 2013 4:09:00 PM IST> <Warning> <HTTP> <BEA-101377> <Filtering class loader configuration ignored for web module p6.war of application p6>
Oct 30, 2013 4:09:03 PM com.sun.faces.config.ConfigureListener contextInitialized
INFO: Initializing JavaServer Faces implementation (1_2_07-b03-FCS) for context '/p6'
- Refreshing com.primavera.bre.SystemApplicationContext@7fc4fe21: display name [com.primavera.bre.SystemApplicationContext@7fc4fe21]; startup date [Wed Oct 30 16:09:05 IST 2013]; root of context hierarchy
- Loading XML bean definitions from class path resource [/com/primavera/pvweb/servlet/webconf.xml]
- Bean factory for application context [com.primavera.bre.SystemApplicationContext@7fc4fe21]: org.springframework.beans.factory.support.DefaultListableBeanFactory@35f5e42b
- Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@35f5e42b: defining beans [metaConfigProvider,settingsManager,adminManager,LogMgr,performanceManager,threadPool,remoteQManager,subSystemInitializer,sqlConnectionPoolManager,registryService,tracer,mailService,configDumpHelper,autoConfigCollectionTask,proxiedUrlOpener,systemFacade,autoStarterService]; root of factory hierarchy
System property 'primavera.bootstrap.home' not found
<Oct 30, 2013 4:09:07 PM IST> <Warning> <HTTP> <BEA-101162> <User defined listener com.primavera.pvweb.listeners.PVContextListener failed: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'registryService' defined in class path resource [/com/primavera/pvweb/servlet/webconf.xml]: Invocation of init method failed; nested exception is com.primavera.common.exceptions.InvalidBootstrapException: System property 'primavera.bootstrap.home' not found.
org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'registryService' defined in class path resource [/com/primavera/pvweb/servlet/webconf.xml]: Invocation of init method failed; nested exception is com.primavera.common.exceptions.InvalidBootstrapException: System property 'primavera.bootstrap.home' not found
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1338)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:473)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
at java.security.AccessController.doPrivileged(Native Method)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
Truncated. see log file for complete stacktrace
Caused By: com.primavera.common.exceptions.InvalidBootstrapException: System property 'primavera.bootstrap.home' not found
at com.primavera.common.BootstrapHome.get(Unknown Source)
at com.primavera.infr.admin.MetaCfg.a(Unknown Source)
at com.primavera.infr.admin.MetaCfg.getMetaJDBCURL(Unknown Source)
at com.primavera.infr.srvcs.RegistryServiceImpl.init(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace

When I am trying to burn my playlist, there is an error message that says "cd/dvd software not found" How do I fix this?

When I am trying to burn my playlist, there is an error message that says "cd/dvd software not found" I can burn in windows media but not itunes. I have tried to uninstall and reinstall itunes but it still does not work. Please help!!

I ran the diagnostics check and this is the message:
Microsoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002)
Dell Inc. Inspiron 1525
iTunes 10.7.0.21
QuickTime 7.7.3
FairPlay 2.2.19
Apple Application Support 2.3
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.0.59
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00C4AB4403487290
Current user is not an administrator.
The current local date and time is 2012-12-05 23:52:38.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
The driver AFS.SYS is installed on the system.
iPodService 10.7.0.21 is currently running.
iTunesHelper 10.7.0.21 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.

"workflow.asmx" method The request failed with HTTP status 404: Not Found.

When consuming workflow.asmx webservice from , I am getting an error on below line number 3.
1.POC.SPasmxWF.Workflow objSPasmxWF = new POC.SPasmxWF.Workflow();
2.objSPasmxWF.Credentials = System.Net.CredentialCache.DefaultCredentials;
3. XmlNode dataNode = objSPasmxWF.GetWorkflowDataForItem("http://in-mum01:7000/sites/PPP/2014-0002/PPPLibrary/GBL-IQ00120140008.doc");
Error details: {"The request failed with HTTP status 404: Not Found."} " at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean
asyncCall)\r\n at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)\r\n at POC.SPasmxWF.Workflow.GetWorkflowDataForItem(String item) in E:\ERT\\Web References\\SPasmxWF\\Reference.cs:line 234\r\n
at POC.Program.Main(String[] args) in E:\\POC\\POC\\Program.cs:line 27\r\n at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args)\r\n at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()\r\n at System.Threading.ExecutionContext.Run(ExecutionContext
executionContext, ContextCallback callback, Object state)\r\n at System.Threading.ThreadHelper.ThreadStart()"

Hi,
For a better troubleshooting, I suggest you to do as follows:
1. On server side you can access the Workflow.asmx from IE to make sure there are no problems in code logic.
2. On client side you can also access Workflow.asmx from IE to see if it returns error.
3. Check the link below:
http://www.mail-archive.com/[email protected]/msg02092.html
If you want to operate the workflow in Client-Side, we can use Client Object Model in SharePoint 2010 to achieve it.
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.client.workflow(v=office.14).ASPX
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Hp pavilion dv6 recovery system with win 7 dvd image not found

Similar Messages

Maybe you are looking for