HP Pavilion DV6 Sleep Mode Issue After Windows 10 Upgrade (Goes To Sleep After 2 Min Of Inactivity)

I recently upgraded my laptop from Windows 7 to Windows 10. The upgrade went smooth and everything appears to be running fine except for one anoying glitch. After approx. 2 min of inactivity my laptop atuomatically goes into sleep mode and logs me out. I have checked all my power settings/sleep settings/screen saver settings...etc and I have completed all the windows updates. I don't see any timers anywhere that require adjustment. Any help would be appreciated. Note: The laptop wakes up fine with no issues.

Hello Konacha, Thanks for posting on the HP Forums!I have read your thread regarding the computer entering sleep mode, upon Administrative prompts or a restart. There isn't a lot that could be done, but by the end of it, the issue should be resolved  Hopefully, the simple fix is creating a new power plan. Your current power plan may be incorrectly configured. This Microsoft website can help with all the details of this task: Change, create, or delete a power plan (scheme)  If that doesn't help, then personally, I would reinstall the operating system. This will fix it, as it will address any software conflict or virus that could be causing this. First, you should backup your data. I will provide information on how to do that: Backing Up Your Files (Windows 7) Once this is done, it is safe to do the System Recovery. Here is some information on how to do this: Performing an HP System Recovery (Windows 7) Please let me know if you have any other questions. Thanks again for posting, and have a great day! Mario

Similar Messages

  • GT70 BSOD or Stuck after Windows puts it to sleep mode of turns off monitor

    Hi Everyone!
    i have an  issue (or 2) with my laptop.
    both happens when:
    1) whenever i put the laptop into sleep mode or either windows does so automatically (inactive period), - the laptop will go to sleep just fine.
    2) windows turns off monitor after a period of inactivity. (sleep mode due to inactivity was disabled in this case)
    in both the cases i mentions above, if i wake the computer within lets say 5 minutes, it'll turn on just fine.
    but after a certain period of time passes it wont.
    with the sleep mode, the computer will wake and will then produce a BSOD STOP error 0x4 and restart.
    with monitor turned off it'll simply wont turn on, not responding to neither keyboard, mouse or power button. - i have to do a hard reboot
    any ideas?
    anything i can check?
    note the laptop just came back from a warranty repair, so all parts have been tested and been found ok!
    system specs:
    MSI GT70-0ND
    CPU: Intel Core i7-3630QM 2.4GHz (Intel GPU HD 4000 included)
    Memory: 16GB DDR3
    Storage: 750GB HDD 7200rpm
                   128GB SSD (Patriot Pyro SE) - OS installed on this.
    GPU: 4GB NVIDIA Geforce GTX 675MX
    OS: Windows 7 64bit
    Thanks in Advance!!

    i dont think i have the same problem as in the other thread.
    my bios:
    my laptop doesnt restart when my screen is turned off and i try to wake it. it would simply wont wake up.
    and my BSOD happens only after i wake the laptop from sleep mode and only if it been in sleep mode for a while. meaning i if i wake it up within a few mins of going to sleep it'll boot justfine.

  • My iPod nano will go into the sleep mode while a song is playing a second after the screen goes blank; the song will stop and I will then have to press the sleep/awake button to pick up where the song left off.  How do I fix this?

    My iPod nano will go into the sleep mode while a song is playing a second after the screen goes blank; the song will stop and I will then have to press the sleep/awake button to pick up where the song left off.  How do I fix this?

    Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback to save battery power when the screen dims. Here are the solutions:
    Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
    Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
    Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
    If none of the above works, you need to take it to the Apple store or wherever you purchased it. I think they are still under warranty.
    i

  • I'm new to the MAC world. I turned my computer on from 'sleep' mode, and a window was up stating that the IOS disk was full; asked me to force quit, then it just froze. It's been 2 hours. Help! I'm worried about losing photos/videos of my children. Thx!

    I'm new to the MAC world. I turned my computer on from 'sleep' mode, and a window was up stating that the IOS disk was full; asked me to force quit, then it just froze. It's been 2 hours. Help! I'm worried about losing photos/videos of my children. Im not sure if there's something special I need to do once I turn it back on; in the meantime, its still on... which I'm afraid the picture on the screen will burn into the screen. Does that happen on iMac's? Thx!

    Try a hard reset. ( holding Power til it restarts)
    Once to your desktop. Click the Apple icon >> About this mac >> More info>> Storage
    Once you see what you have the most of. Try to see what you can delete.
    Open up any folder>>all files>> or buy an external to store more data.
    Once deleting make sure you empty your trash.
    If you are new and its a new computer, you might need to bring it to a store for further assistence.
    Coast Guard Mechanic w/ an Apple Problem

  • Lose printer after macbook pro goes to sleep

    I have a wireless printer (Samsung CLX-3185FW) that I talk to through my time capsule/ariport.
    After my computer (or any of the ones on the network) go to sleep, it can no longer see the wireless printer.  The happens whether the printer is in active/ready mode, or is asleep.
    After the computer goes to sleep (and I wake it again, and it is connected to the wireless network), I can't print, wake the printer from sleep, or re-add the printer through preferences.
    If I restart the printer, the computer can see it again.
    There is no problem if using USB.
    Given the printer is still connected to the airport, I am presuming it is a problem with some settings on my computer or time capsule.
    Any ideas would be greatly appreciated!

    itrina wrote:
    I have a wireless printer (Samsung CLX-3185FW) that I talk to through my time capsule/ariport.
    After my computer (or any of the ones on the network) go to sleep, it can no longer see the wireless printer.  The happens whether the printer is in active/ready mode, or is asleep.
    After the computer goes to sleep (and I wake it again, and it is connected to the wireless network), I can't print, wake the printer from sleep, or re-add the printer through preferences.
    If I restart the printer, the computer can see it again.
    There is no problem if using USB.
    Given the printer is still connected to the airport, I am presuming it is a problem with some settings on my computer or time capsule.
    Any ideas would be greatly appreciated!
    Just to confirm.. you can open the airport utilty.. can you still see the TC/airport? And the printer is still there?
    Can you find the IP of the printer from the TC/airport? Wireless clients will be listed on the advanced log wireless clients page. Make sure the TC can still see it.
    From the computer open a terminal and ping the printer name.. (this is where the problem is I think the computer has lost the printer name from the arp table). If the ping fails to respond, ping by the ip address. See if that gets things going. Tell me your results.
    Also when you restart the printer.. and can print, in the terminal type arp -a and copy the output.. the printer should be identified on the network..
    After a computer goes to sleep and wakes.. cannot find the printer.. type arp -a again in the terminal and see if the reference to the printer has gone.
    Tell me your results.

  • Can't access old ver. 9, 11 & 13 clips after Windows upgrade

    In Sept. 2014 I downloaded PE 13 from B&H, worked fine and was able to access old PE9 & PE11 clips.  In Dec. 2014 had problems with Wind. 7 Home Ed. and had to upgrade to 8.1 (decided on Pro).  Installed 8.1 Pro end of Dec. 2014 and bought PE 13 DVD from B&H to reinstall after I backed up my hard drive.  Problem after install of 8/1 Pro and installing PE13 from DVD I can't access and restore old clips from 9, 11 & 13.  Tried everything I can think of....any suggestions PLEASE!

    Very good, I completely understand.  Please understand "I am not a computer geek!"
    With the old computer system, you have Premiere Elements 9, 11, and 13 projects. And, you import media into each and see thumbnails for each of your imports in the project media area of the program (in version 11 and 13, called Project Assets).  CORRECT!  Please as we go forward I have the PE 13 that was downloaded from B&H and worked perfectly with my previous assets in PE 9 & 11.
    When you go to open a project in one of these programs and go to the project media area, do the source media thumbnails still show as before with image in the thumbnail? Or does the thumbnail have a display of circular arrows? If the present as before, can you drag the file from the project media area to the Timeline? If you cannot, it that the problem? NO!  (First info is when I set up my new PE 13 after copying all data to a 1T desk drive and loaded Windows 8.1 Pro to replace my Windows 7 Home Edition, I set up the PE 13 and used 64 bit as suggested.)  NOW...When I locate my previous Project Assets on the 1T drive they show as "red blocks" with a play arrow in them where previously were thumbnails, but I can't retrieve them.  As such there is nothing to add to the timeline.  Last night I added to the NEW PE 13 a 22 min program I'm working on.  I have all those assets, thumbnails and everything is working as wonderfully as it did in 9, 11 and downloaded 13.
    Now in response to a previous question you asked:
    1. When you open Premiere Elements 13 Expert workspace, go to Publish+Share/Computer/QuickTime, do you see a list of presets when you explore
    the Presets" field there?  NO.... I can get to /Computer but there is no QuickTime there!  I did download QuickTime yesterday after your suggestion.
    2. You wrote
    Restarted PE13 and received the message "The selected file cannot be played becuse your system does not have the required compresser/decompresser (codec) installed.
    Where are you getting the selected file---- from Premiere Elements 13 Expert workspace Project Assets to where it was imported originally from a hard drive save location?
    Or other? What is the specific full name of one of these files that is giving the error message?
    With everything I've been trying, I'll have to recreate this series of events to answer directly.
    When you did the switch from Windows 7 Home to Windows 8.1, did you go 64 bit to 64 bit or 32 bit to 64 bit in operating system?  Help me with a way to determine what the bit was on 9 & 11!
    Were two separate computers involved or did you manage to change the operating all on one computer?  All on one Computer
    The major focus for me right now is to make sure I know what file triggers the ".....not have the required compressoer/decompressor (codec)"? And to know that
    you are in the Premiere Elements 13 Editor and not the Organizer 13 workspace.  Help me understand!!!!  I know the difference between "Add Media", "Project Assets", "Organizer", "Editor" and "Workspace".  But "Project Assets" and "Workspace" are part of "Editor", so I don't understand your question.
    WolcottVideo
        Can't access old ver. 9, 11 & 13 clips after Windows upgrade
        created by A.T. Romano in Premiere Elements - View the full discussion
    WolcottVideo (Mike Bruce)
    Thanks for the replies.
    My communications are in the threads or via Adobe Forums private message. The thread communication is preferred since then all share, and learn.
    Please try to reply to the post 4 questions or use the Adobe Forums private message system to send me a private message. To do the latter, click on my Adobe ID at the top of any of my replies in your thread. That should bring up my profile. Click on the orange envelope message icon to the right of what you see in order to set up and send your email to me directly. No one but you and I see the Adobe private message communications.
    Here is a basic description of where the details between us need to be confirmed...
    With the old computer system, you have Premiere Elements 9, 11, and 13 projects. And, you import media into each and see thumbnails for each of your imports in the project media area of the program (in version 11 and 13, called Project Assets).
    When you go to open a project in one of these programs and go to the project media area, do the source media thumbnails still show as before with image in the thumbnail? Or does the thumbnail have a display of circular arrows? If the present as before, can you drag the file from the project media area to the Timeline? If you cannot, it that the problem?
    We will be watching for your reply.
    ATR
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7087876#7087876 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7087876#7087876
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"      
    Start a new discussion in Premiere Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Why iPad mini battery drain so quickly in sleep mode? about 35% in 7 days sleep mode (100% to 65%). Compare with my iPad 2, 7 days in sleep mode, only 2%! (100 - 98%). is it because differences in iOS? iPad mini iOS 6.0.1, iPad 2 iOS 4.3.3. I'm really fru

    Why iPad mini battery drain so quickly in sleep mode? about 35% in 7 days sleep mode (100% to 65%). Compare with my iPad 2, 7 days in sleep mode, only 2%! (100 - 98%). is it because differences in iOS? iPad mini iOS 6.0.1, iPad 2 iOS 4.3.3. I'm really frustating because of this. thanks for help

    What kind of ipad mini / ipad 2 you got?
    AFAIK,
    1. ipads drain battery with 3g/4g on (regardless on wifi or not) 1% overnight.. so for 7 days .. 65 is about correct.
    2. Are your ipads setup to receive remote push notification? (more push = more battery drain.. as the screen lit up)
    3. With iOS 6 vs iOS 4 .. there are more stuff running in the background and more toggles.. that could also contribute to battery drain.

  • Sleep mode issue after Mountain Lion

    I am having an issue with the computer restarting after coming out of sleep mode.  It does this after sleeping for a few hours.  Below is the error code.  Any help with what might be causing this would be greatly appreciated.  Thanks!
    Interval Since Last Panic Report: 96685 sec
    Panics Since Last Report: 5
    Anonymous UUID: BCC2B2AD-9DD8-4F84-B47B-9BA7440CC2D0
    Wed Aug 8 08:31:00 2012
    panic(cpu 2 caller 0xffffff800dcb7b95): Kernel trap at 0x000000040012b44e, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x000000040012b44e, CR3: 0x000000000fea9000, CR4: 0x00000000000606e0
    RAX: 0xffffff8028e7f400, RBX: 0xffffff80189a1c00, RCX: 0x7fffffffffffffff, RDX: 0x0000000000000100
    RSP: 0xffffff8086ba3df8, RBP: 0xffffff8086ba3e40, RSI: 0xffffff801827f180, RDI: 0xffffff8028339d00
    R8: 0x0000000000000049, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
    R12: 0xffffff8028339d00, R13: 0xffffff80189a1c00, R14: 0xffffff8028339d00, R15: 0xffffff80189a1c00
    RFL: 0x0000000000010286, RIP: 0x000000040012b44e, CS: 0x0000000000000008, SS: 0x0000000000000010
    Fault CR2: 0x000000040012b44e, Error code: 0x0000000000000010, Fault CPU: 0x2
    Backtrace (CPU 2), Frame : Return Address
    0xffffff8086ba3a90 : 0xffffff800dc1d5f6
    0xffffff8086ba3b00 : 0xffffff800dcb7b95
    0xffffff8086ba3cd0 : 0xffffff800dcce4ad
    0xffffff8086ba3cf0 : 0x40012b44e
    0xffffff8086ba3e40 : 0xffffff800e03b4ac
    0xffffff8086ba3e60 : 0xffffff800e0364a8
    0xffffff8086ba3eb0 : 0xffffff800e0401d4
    0xffffff8086ba3ef0 : 0xffffff800e0402af
    0xffffff8086ba3f30 : 0xffffff800e045b8a
    0xffffff8086ba3f80 : 0xffffff800e045cb9
    0xffffff8086ba3fb0 : 0xffffff800dcb2677
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    12A269
    Kernel version:
    Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
    Kernel UUID: 8D5F8EF3-9D12-384B-8070-EF2A49C45D24
    Kernel slide: 0x000000000da00000
    Kernel text base: 0xffffff800dc00000
    System model name: MacBookAir4,2 (Mac-742912EFDBEE19B3)
    System uptime in nanoseconds: 31523577780770
    last loaded kext at 17403178371576: jp.plentycom.driver.SteerMouse     4.1.4 (addr 0xffffff7f8f93a000, size 45056)
    last unloaded kext at 17464555730602: jp.plentycom.driver.SteerMouse     4.1.4 (addr 0xffffff7f8f93a000, size 32768)
    loaded kexts:
    com.parallels.filesystems.prlufs     2010.12.28
    com.parallels.kext.prl_vnic     7.0 15104.778994
    com.parallels.kext.prl_netbridge     7.0 15104.778994
    com.parallels.kext.prl_hid_hook     7.0 15104.778994
    com.parallels.kext.prl_hypervisor     7.0 15104.778994
    com.parallels.kext.prl_usb_connect     7.0 15104.778994
    com.shapeservices.msm.driver.MSMFramebuffer     3.2.0
    com.shapeservices.msm.driver.MSMVideoDevice     3.2.0
    com.rim.driver.BlackBerryUSBDriverInt     0.0.68
    com.apple.driver.AppleBluetoothMultitouch     75.15
    com.apple.driver.AppleUSBEthernet     2.3.2
    com.apple.filesystems.udf     2.3
    com.apple.filesystems.smbfs     1.8
    com.apple.driver.AudioAUUC     1.60
    com.apple.driver.AppleHWSensor     1.9.5d0
    com.apple.filesystems.autofs     3.0
    com.apple.iokit.IOBluetoothSerialManager     4.0.9f8
    com.apple.driver.AGPM     100.12.69
    com.apple.driver.AppleMikeyHIDDriver     122
    com.apple.driver.ApplePlatformEnabler     2.0.5d4
    com.apple.driver.AppleHDA     2.3.0f2
    com.apple.driver.AppleUpstreamUserClient     3.5.10
    com.apple.iokit.IOUserEthernet     1.0.0d1
    com.apple.driver.AppleLPC     1.6.0
    com.apple.driver.AppleIntelHD3000Graphics     8.0.0
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBT ransport     4.0.9f8
    com.apple.driver.AppleMikeyDriver     2.3.0f2
    com.apple.Dont_Steal_Mac_OS_X     7.0.0
    com.apple.driver.AppleSMCLMU     2.0.2d0
    com.apple.driver.ApplePolicyControl     3.2.6
    com.apple.driver.ACPI_SMC_PlatformPlugin     1.0.0
    com.apple.driver.AppleBacklight     170.2.3
    com.apple.driver.AppleMCCSControl     1.0.33
    com.apple.driver.AppleIntelSNBGraphicsFB     8.0.0
    com.apple.driver.AppleSMCPDRC     1.0.0
    com.apple.driver.AppleUSBTCButtons     235.4
    com.apple.driver.AppleUSBTCKeyboard     235.4
    com.apple.driver.AppleUSBCardReader     3.1.0
    com.apple.AppleFSCompression.AppleFSCompressionTyp eDataless     1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTyp eZlib     1.0.0d1
    com.apple.BootCache     34
    com.apple.driver.XsanFilter     404
    com.apple.iokit.IOAHCIBlockStorage     2.2.0
    com.apple.driver.AppleUSBHub     5.1.6
    com.apple.driver.AirPort.Brcm4331     600.15.20
    com.apple.driver.AppleAHCIPort     2.4.0
    com.apple.driver.AppleUSBEHCI     5.1.5
    com.apple.driver.AppleEFINVRAM     1.6.1
    com.apple.driver.AppleRTC     1.5
    com.apple.driver.AppleSmartBatteryManager     161.0.0
    com.apple.driver.AppleACPIButtons     1.6
    com.apple.driver.AppleHPET     1.7
    com.apple.driver.AppleSMBIOS     1.9
    com.apple.driver.AppleACPIEC     1.6
    com.apple.driver.AppleAPIC     1.6
    com.apple.driver.AppleIntelCPUPowerManagementClien t     196.0.0
    com.apple.nke.applicationfirewall     4.0.39
    com.apple.security.quarantine     2
    com.apple.driver.AppleIntelCPUPowerManagement     196.0.0
    com.apple.driver.AppleMultitouchDriver     235.27
    Model: MacBookAir4,2, BootROM MBA41.0077.B0F, 2 processors, Intel Core i5, 1.7 GHz, 4 GB, SMC 1.73f65
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xE9), Broadcom BCM43xx 1.0 (5.106.98.81.20)
    Bluetooth: Version 4.0.9f8 10405, 2 service, 18 devices, 1 incoming serial ports
    Serial ATA Device: OWC Mercury Aura Pro Express 6G SSD, 240.06 GB
    USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x024c, 0xfa120000 / 5
    USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821f, 0xfa113000 / 6
    USB Device: FaceTime Camera (Built-in), apple_vendor_id, 0x850a, 0xfa200000 / 2
    USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8404, 0xfd110000 / 3

    I have the same issue with a MBP from mid 2011 and 500GB SSD drive.
    Thought maybe it was caused by dropbox, google drive, twitter, clocks or logmein, but even after clsoing all of these and putting it to sleep it still happens.
    Found this on another site so please let me know if this is useful.  I haven't tried any of this but will soon.
    http://displaylink.org/forum/showthread.php?t=1814

  • HP Pavilion dv6-6c57ea Entertainment Notebook PC windows 764 BitHome premium

    Tried everything but my HP Pavilion dv6-6c57ea Entertainment Notebook PC has a stereo mix there.. I see it but playing music in a chatroom I own is not possible. I disable Logitech headset and try to make stereo mix default but no joy. Confusing also as I have Control Beats Audio settings on talkbar. Frankly no idea whether I need audio drivers or what.
    Looking on HP Support and on sound card I have IDT High Def Audio... If anyone can assist I would be delighted. Have teamviewer too so would be be most greatful to even be remoted to sort this out
    Thanks in anticipation

    Hi david458:
    Thank you for your post.  I will be glad to help!
    I understand that you did not do a backup and you are now having an issue.  I am sending you a link to "Performing an HP System Recovery (Windows 7)"  click here. and "Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive (Windows 7)"  click here. You can also order a Recovery kit from the driver download page  click here.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Mac Pro Sleep/Wakeup Issue in Windows 7 x64

    I have experienced two issues related to sleep in Windows 7 x64 on my Mac Pro 3,1 with Bootcamp 3.2 for a while. From search results it seems several people also experienced similar issues, but no solution/workaround yet.
    The first issue is that sometimes the Mac Pro won't wake up from sleep. If I made it to enter sleep, then it (almost) always wake up. But if it enters sleep itself, then there's a chance (around 25%) that it won't wake up. The fans and HDDs are running, but the screen is black, mouse/keyboard no response and I can't ping it. After forcing it to shutdown and restart it, there will be an "HAL Error" in Eventlog ("The platform firmware has corrupted memory across the previous system power transition. Please check for updated firmware for your system"
    ). Some folks experienced the same issue in this thread: http://discussions.apple.com/thread.jspa?messageID=11839029
    The second issue is that if I disable Hybrid Sleep with the Apple Bluetooth Keyboard connected, the Mac Pro will not sleep with the HDDs shutdown but fans running at full speed. If I removed the batteries from the Apple Bluetooth Keyboard, it goes to sleep and wakes up normally. Whether the Magic Mouse is connected or not doesn't make a difference.
    I can't reproduce either issues in OS X.
    Would really appreciate if someone can share some insights or workarounds. Thanks!

    Yes, almost the same problem!
    Please someone help...

  • Pavilion dv6 QE CPU Issue

    Hello. After I recently ran HP Support Assisstant for the first time since I got this notebook, I noticed a peculiar issue with my computer. Occasionally after some usage of my notebook I would look at my All CPU Meter and see that a single core out of the 8 would just randomly jump up to 100% usage and just hang there for a while. Usually when this happens, it is when I'm about to switch programs. Also when this issue starts happening and I try to shut off my computer, it will not shut off by itself and I need to hold the power button down for it to power down all the way. I think that Bins might be messing around with my notebook but that doesn't seem to be the case because when I turn it off it still happens occasionally.

    Khaleal wrote:
    Hello,
    I have a HP Pavilion dv6-3010ej with Core i3 350M, And I am interested in upgrading the CPU.
    Is it possible to upgrade the CPU on this model? If possible, What are the options I have? I prefer Core i7
    Your help is appreciated.
    Please note that it has switchable graphics (ATI HD 5470 and Intel HD Graphics)
    Thanks
    Hi,
    Have a look at this manual: http://h10032.www1.hp.com/ctg/Manual/c02657339.pdf
    Your laptop (the motherboard) supports only dual core processors (Core i3 and i5..). Upgrade to a Core i7 processor means that you have to change the motherboard. 
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • Z77A-GD65 power led on sleep mode issue

    Hello,
    Just finished putting up my new gaming system. It's my second MSI mobo build. Everything works just fine except for one thing - power led won't blink on sleep mode, it stays lit up. I'm not sure if this is an OS issue. I've tried installing Win7 on two HDDs, one's IDE sata mode, and AHCI for the other one. Didn't make any difference. Computer will turn off and go to "sleep mode" but the power led will stay on. My MSI P67 mobo blinks when on sleep mode. Also, for the Z77 mobo, the ACPI setting on the BIOS has S3 mode, and it has "blinking" and "dual light" option for the sleep indicator, neither of these function properly. Even on BIOS v10.3, power led is still lit up on sleep mode. Flashed it to 10.5, still the same result. Overclocked or default, still the same result.
    I really need an expert to tell me what is wrong with it. Is it a BIOS glitch? Or a defect?
    Thanks in advance.
    Jon

    the power logix thing was really sad. apple changed so much after 10.4.8 that there wasn't a viable way to patch the software.
    That statement is precisely why I don't believe in blindly updating the OS, especially in a non-standard machine.
    We can't expect third parties to support us forever, and it is shameful to break something that works fine, except that we updated the OS....
    I think that any upgrade or modification to a machine or the OS greatly increases the risk of trouble or incompatibility with current configuration and "new" system files.
    After all, the component or software could only be tested as far as the current OS version when the component or software was released.
    Beyond that, we are all "beta testing".
    Following a beta tester protocol, and applying updates to a cloned system drive first, is a prudent way to approach updates, and not only for older, heavily modified machines.
    After 10.4.8 and moreso with Leopard, the focus is primarily on Intel architecture, not PPC architecture.
    Like it or not, we are all updating to the abyss of the extinction of our machines, unless we can be satisfied with the last stable version of OS that works well with our hardware and software.
    I wish they would include the latest pkgs at least with software update.
    Yes, having individual packages, rather than lump "OS X 10.x.x" updates would be nice.
    This way, one could update as one sees fit. That is to say, for example, fix the Quicktime, but leave my Network alone, etc., etc.
    In all fairness, Apple does provide for some breakdown of updates, but I believe there is much room for improvement, especially, as you point out, with regard to the core services portion of the OS.
    Until then, I'll leave Software Update disabled.......

  • Power Mac G4 sleep mode issue using 10.5.8

    Hello All,
    If this is posted in the wrong discussion room, let me know.
    I have a problem and I am not sure what to do at this point. For reference to understand the problem, I have a Power Mac G4 Dual 1.25Ghz MDD 2003(No FW 800) with an Apple Cinema Display. I also have a USB 2.0/FW 400 PCI card installed. I use this card to connect my external HD's.
    The problem I am having is that the machine does not fall asleep properly using Leopard. When I manually put the computer to sleep, the monitor and external HD's shut off, but the fan stays on. When I try to wake the computer by hitting keys on the keyboard or moving the mouse, the computer will not wake the monitor or the External HD's. Furthermore, it freezes the computer when it is in the mode and the only way for the computer to function again is if I restart.
    Until a month ago, I was running Tiger, 10.4.11, on my machine and had absolutely no problems with sleeping my Mac. I decided to go to Leopard, 10.5.8, and used the clean install option. I then used migration assistant to grab all my data and settings from a backup using Carbon Copy Cloner.
    Using 10.4.11, I would usually let the computer sleep after 15 minutes of idling. Now, under 10.5.8, the computer freezes after the sleep mode is attempted.
    At first I assumed that the computer was preparing itself to sleep and might take a while. I decided to wait it out to see if the computer would eventually fall asleep. I waited an hour but the computer maintained the same status with the fans blowing and the front power button light staying lit. And, of course, the keyboard and monitor were not responding.
    I read some forum discussions that suggested to people with similar problems to consider removing anything connected to the PCI card. It was suggested that the HD's were keeping the computer awake. I tried removing each HD one at a time to see if it was a particular HD causing the problem. With each configuration that I tried to put the computer to sleep, the same result occurred.
    At this point, I am at a loss. I love my PowerMac and don't feel the need to upgrade as my most of my needs are met with this machine. This problem is not a deal breaker for me, but it is an annoying to have to restart after leaving the computer for a while. I know the other option is to shutdown and startup each time I leave the computer for any timeframe longer than 30 minutes, but is annoying and I don't know how bad it is for the computer to be shutdown and started again so frequently. If there is a fix to take care of this problem, I am willing to try it.
    Any advice would be appreciated.
    Thanks in advance,
    Maverick

    the power logix thing was really sad. apple changed so much after 10.4.8 that there wasn't a viable way to patch the software.
    That statement is precisely why I don't believe in blindly updating the OS, especially in a non-standard machine.
    We can't expect third parties to support us forever, and it is shameful to break something that works fine, except that we updated the OS....
    I think that any upgrade or modification to a machine or the OS greatly increases the risk of trouble or incompatibility with current configuration and "new" system files.
    After all, the component or software could only be tested as far as the current OS version when the component or software was released.
    Beyond that, we are all "beta testing".
    Following a beta tester protocol, and applying updates to a cloned system drive first, is a prudent way to approach updates, and not only for older, heavily modified machines.
    After 10.4.8 and moreso with Leopard, the focus is primarily on Intel architecture, not PPC architecture.
    Like it or not, we are all updating to the abyss of the extinction of our machines, unless we can be satisfied with the last stable version of OS that works well with our hardware and software.
    I wish they would include the latest pkgs at least with software update.
    Yes, having individual packages, rather than lump "OS X 10.x.x" updates would be nice.
    This way, one could update as one sees fit. That is to say, for example, fix the Quicktime, but leave my Network alone, etc., etc.
    In all fairness, Apple does provide for some breakdown of updates, but I believe there is much room for improvement, especially, as you point out, with regard to the core services portion of the OS.
    Until then, I'll leave Software Update disabled.......

  • Adobe PDF Preview Handler Issue in WIndows 8 64 Bit Machine - After installing Adobe Pro 11.0.10

    Hi Guys ,
    We are facing a serious issue with Windows 8 and Adobe PDF Preview Handler . We are using the PDFPrevHndlr.dll from Adobe to show PDF Previews in our application. It is working fine in Windows 7 and Vista and for some reason it is not working in Windows 8.1 64 bit machines after upgrading to Adobe Pro 10.0.10 .  Please help us figure out what is the root cause of this issue .
    During a close analysis we have found that the PrevHost.exe( Windows component ) is failing soon after it is being invoked . Any help in this is much appreciated.
    Regards
    Sree

    Hi Sree,
    According to your description, your case related to Adobe PDF Preview Handler. This is third-party product. I am afraid this is out of our support. Please ask in their special forum
    https://forums.adobe.com/community/adobe_reader_forums
    By the way, after do some search, it seems not working for 64bit machine,
    >> It is working fine in Windows 7 and Vista
    Also work fine in win7/vista 64bit????
    If your scenario is not working in 64bit machine, try to put "adobe pdf preview handler 64-bit fix" in search engine. Good luck.
    Have a nice day!
    Kristin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Hp pavilion dv6, I have to keep resetting my playback tone contols after sart up

    When I start my hp pavilion dv6, i have to reset my playback tone contols and the "apply" option is greyed out. How can I keep my tone setting as the default setting for my speakers?

    You guys probably resolved this by now but just in case you haven't I have been having the problem for about a week now. I bought a customized dv6t Entertainment notebook in July but recently didn't want the Beats audio manager on at startup so i went to msconfig and disable IDT audio from the startup menu. That's when everytime I turned on my computer the tone controls went crazy, with the bass all the way down and the treble all the way up. So after some testing I found out how to fix me. Even though it has been 8 months since you asked about this, here is my SOLUTION.
    1. Using the Sound Manager set your tone controls to the desired levels or just click reset to zero.
    2. Click the start button and type msconfig in the search bar. Hit enter.
    3. The System Configuration box will appear. Click on the third tab that says Services.
    4. Click the bar that says Service to arrange the programs alphabetically.
    5. You should see Audio Service with the manufacturer being IDT, Inc.  if not then scroll down til you see it.
    6. Uncheck Audio Service. Click the Apply button at the bottom of the page then the OK button.
    7. You will be prompted to restart your computer and then do so.
    8. That's it! Once your computer restarts the tone control levels should be where you left them.
    If you are having problems with this, it may be because you don't have IDT PC Audio disabled at startup which can also be done in msconfig one tab over from Services. This launches the Beats Audio Manager at startup but just disabling the Audio Service may do this in one fell swoop. Hope this helps, even after all these months!

Maybe you are looking for