HP Pavilion dv6500 Entertainment Notebook PC series Operating system not found

Hello to all how are you doing guys doing today I'm having a problem and need the help from the tech world. So i have a Hp Pavilion dv6500 cto notebook. I started it up and got a black screen stating "Operating System Not Found". I couldnt get into safe mode to recover back to a safe point, i was able to get into the bios system to do a memory and Hard drive test, my memory test came back as a Pass but my Hard drive came back as a fail and stated "Replace Hard Drive".
Now i went out bought a new WD 500GB 5400rpm hard drive for the laptop, i installed it and did a Hard Drive test to make sure it was good and the test came back as a Pass.  Now i had this laptop for years since 2007 and it broke just a few months ago, i just got the new hard drive yestarday and was playing doctor last night. When i got the laptop as a gift i was only given a recovery disk which did boot up and gave me the install now option and repair computer option. I chose the install now option and it was starting to install but then got this error message "Windows cannot open the required file D:\Sources\Install.wim. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070002." I read that you cant install windows from a recovery disk so now im back to square one. 
So current status is I got a new hard drive that pass the bios test, memory test was a pass. I have no windows disk other then the windows vista recovery disk i tried but failed to install windows. I also tried a windows 7 disk from work but the disk wouldnt boot up came back with a message stating that disk couldnt be read there may be problem with the cd dvd drive or hard drive, but when i put in the windows vista recovery disk that boot up no problem. i just cant install window with it. So Im stuck with a black screen stating no operating system is not found. Note that i havent change the boot up line up back to hard drive to see if it would boot up the new hard drive but i dought it would change anything since its a brand new hard drive with nothing on it.
If someone could help me with step by step like how to get an operating system on my new hard drive. My wife has a laptop but with no cd drive so i would need instruction to boot get it on the usb. Hope i was helpful with my problem.

You have only tried questionable disks. You could order a recovery disk from HP but I am not even sure they still have Vista recovery disks. You could also buy a Windows 7 OEM disk and try that. it will cost you a bit but will be legal. What version of Vista is it? You can also try to find a Vista install disk and use the Key Code on the bottom of the laptop if it is still legible. Here is a link to downloadable .iso files you can use to make a Vista install disk that will activate with your Key Code:
http://downloadsnfix.blogspot.com/2012/08/microsoft-windows-vista-official-iso.html

Similar Messages

  • HP DV6700 Operating System Not Found- How Can I Access & Back Up Files?

    1. HP Pavillon DV6700 -> old yes, I know
    2. Operating System: Vista
    3. Black Screen -> Err2Err3 Operating System Not Found
    I ran the Primary Hard Drive Self Test > Hard Disk Self Test and it was a quick test. After it finished it came back with "#10009- Replace Hard Disk"
    My question is: I've been tring to make this laptop last for as long as possible (obviously considering I was still using Vista). I plan to trash this laptop, but I need to know somehow, some way to access my files. There are pictures and essays that I absolutely need and I didn't do any back up in the last 2 months.
    Please any suggestions!

    Yes use a usb to SATA adapter:
    http://www.amazon.com/Patuoxun-Converter-Adapter-C​able-Drive/dp/B008ASF5MC/ref=sr_1_3?ie=UTF8&qid=13​...
    That one is very inexpensive on amazon.com. Connect the SATA hard drive to the adapter (after removing the drive from the laptop) and plug the usb connectors into two usb ports on any other computer running XP or greater. The laptop drive will (if you are lucky) mount as a lettered drive on the host computer and you can copy and paste files off the drive with Windows Explorer file browser.

  • Operation System not found

    I've been following the beginners' guide and I keep running into this "Operation System not found" error.
    I'm using a dell xps l502x, and trying to install x86_64 arch. I've tried using syslinux and grub both with the same error on reboot
    During a syslinux install I use fdisk to partition the drive. The tutorial says this is to create an mbr, but it gives me a gpt from some reason:
    Disk /dev/sda: 120.0 GB, 120034123776 bytes, 234441648 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk label type: gpt **this I don't understand, as I'm following the guide for the mbr**
    # start end size type name
    1 2048 31459327 15G Linux filesystem
    2 31459328 234441614 96.8G Linux filesystem
    and my fstab is:
    # <file system> <dir> <type> <options> <dump> <pass>
    #/dev/sda1
    UUID=0ec7dc20-1ea3-4f1c-810b-4fded8550744 / ext4 rw,relatime,data=ordered 0 1
    #/dev/sda2
    UUID=9d6efd2f-8a18-4968-b251-7e09983ef539 /home ext4 rw,relatime,data=ordered 0 2
    So I have no errors at this point other then fdisk creating gpt instead of mbr.
    I install syslinux, no errors:
    Syslinux install successful
    attribute legacy bios bootable set - /dev/sda1
    installed MBR (usr/lib/syslinux/gptmbr.bin) to /dev/sda
    I edit the syslinux config to point to /dev/sda1.
    exit, umount /mnt/home, reboot, operation system not found!. The strange thing is when i go to the install disk and click Boot existing OS, I am able to find my install through syslinux and select Arch Linux, and it is functional.
    I'm not really sure where to go from here as I've tried both syslinux and grub with the same result. When using grub I make sure to create the 1007kb boot partition marking it as EF02, and i still get operation system not found.
    Last edited by soote (2013-08-31 20:36:12)

    WonderWoofy wrote:This sounds not like a problem with Arch or your bootloader installation at all.  Rather it sounds as though you need to make an adjustment to your bios to tell it to correctly try to boot the disk with syslinux on it.
    Thank you for the advice. I followed the steps listed here, and ran everything except for the last command (# syslinux-install_update -i -m). On reboot I was still faced with the Operation system not found error. I then ran # syslinux-install_update -i -m and got the following:
    Syslinux install successful
    ABORT! MBR installation to partition (/dev/mapper/arch_root-image)!
    I'm unsure of what this error means, but it lead me to this blog entry.
    This blog looks promising.
    roentgen wrote:
    Same Dell here. It seems to be a compatibility problem between BIOS and GPT.
    I couldn't find any other way than to use MBR.
    How do you create the partition table? In fdisk 'o' is used to create a DOS (MBR) partition table.
    I followed the beginners' guide to create it. I will try creating the partitions with o instead of p, i didn't know about that option. I really don't need a GPT partition.
    Last edited by soote (2013-08-31 21:07:22)

  • Startup trouble, won't update and says "operating system not found"

    So when I tried updating to the new thunderbolt update thingy (yes I know, VERY late but I kept forgetting to update it and I didnt have time) it didnt start up because it said "operating system not found" after 30 mins of looking around for tips to reboot they didnt work,
    I troed rebooting and it worked, and I followed the instructions to "download Mac OS X Lion" again. But it wont redownload because this reason:
    "You can't upgrade this version of Mac OS X because a newer version is installed."
    I have tried everything and since I downloaded the thunderbolt REALLY late I dont think anyone else had had this problem.
    Help me please?

    Hi, pimmerik. 
    Thank you for visiting Apple Support Communities. 
    Sorry to hear that you are experiencing this issue.  I would go through the steps in the article I have included below as they may help resolve this error. 
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    Regards,
    Jason H. 

  • Operating System Not Found VPCSE15FL

    Operating System Not Found VPCSE15FL

    Hi ACCONNITT,
    Welcome to Sony Community!
    Do you still remember what has change prior to the error message? What is the current operating system of your laptop?
    TheSonyFanGirl1 is correct, in addition to this, please follow the instructions carefully to make sure that you can isolate the issue. 
    Please keep us posted. Thanks.
    -Jen
    If my post answers your question, please mark it as "Accept as Solution"

  • Operating system not found & no IDE device

    My hp pavillion dv9000 has had a bunch of problems since I bought it about six years ago but it has always come through though. Now I haven't had a chance starting the laptop because of an error message right after the HP start screen that says &quot;operating system not found&quot;.. Seems like it can't detect any hard drive as it says &quot;no ide device&quot; when running a hard drive test in bios. I've tried everything, I think, reseating the hard drives, load default configuration (bios), hard reset, and simple things. This gives me the idea that the hard drive is completely broken <br>Would it be possible to get an external hard drive and start it in that way?<br><br>Regards Nossin

    The hard drive is probably competely dead and needs replacement

  • T43 operating system not found

    My laptop is thinkpad T43, recently the problem with Operating system not found happen, and the light for hard disk can not flash. But sometimes it will disappear, the laptop can start normally, who can tell me the exact reason??????
    Message Edited by evan_ares on 05-20-2008 07:17 AM

    Welcome to the forum!
    Posting the 7-character model number of the T43 in question would be a good start...
    Downloading and burning a PC-Doctor disk and booting from it would be the next step:
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-56222
    Good luck and keep us posted.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • T43-"Operating System not found" woes

    Hey all first time post long time listener, got a t43 thinkpad that will not boot and gets the message,
    PXE-E61 - Media test failure, check cable
    PXE-M0F - Exiting Broadcom
    Operating System not found
    First I checked BIOS and found that it was not recognizing hard drive, turned off broadcom, switched around startup hardware,etc etc and nothing still "operating system not found". Set everything to default, again same thing. Then I took out hard drive, and re inserted...again nothing. So I took apart laptop to look at connection on mother board, cleaned everything with dust-off, no visible problem on MB, took off CMOS battery, because I was in the neighborhood and figured it couldn't hurt,and reset CMOS info, put it all together and voila it starts up..midway through transferring files off, the hard drive (I assume) froze up and I had to do a hard reset. On the new boot, same problem as before.
    In the interest of price, I heard that the CMOS can drop below a certain voltage and screw with BIOS boot, (although there is no visible change in date/time and lenovo tech assured me it isn't the case),is this a possibility? Or is it a hard drive and/or MB issue? Hope you guys can help me out, thanks!

    Welcome to the forum!
    Posting the 7-character model number of the T43 in question would be a good start...
    Downloading and burning a PC-Doctor disk and booting from it would be the next step:
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-56222
    Good luck and keep us posted.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Using the Dvd recovery disks results in "operating system not found"

    I recently bought the DVD recovery disks for Windows 8 from HP. After following the procedure using the 3 recovery disks plus the supplemental "Application and Driver recovery" disk. Immediately after installing the supplemental disk I receive a message that says "contact HP support and "in most cases recovering the hard drive will fix the problem".
    When I try to reboot another message appears saying "the operating system is missing". I repeated the procedure several times (also skipping the supplemental disk) and the message is the same.

    Hi:
    I can't help you with that problem but if you want to try making your own plain W8 installation media, you can use this file and it should work with the embedded product key in your notebook's BIOS.
    https://docs.google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?pli=1
    Then use this tool to transfer the file to a 4 GB USB flash drive or DVD.
    The tool will also make the media bootable.
    http://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool
    Then go to the g6z-2200 download page and get the drivers and available software you need.
    http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lc=en&product=5328122
    You will also need to install the AMD Chipset Drivers from the link below.
    http://support.amd.com/en-us/download/chipset?os=Windows%208%20-%2064
    If it works, see if you can get your money refunded from HP for the disks.

  • Operating system not found when deploying to machines with two hard drives using MDT 2013.

    Computers with two hard drives will not boot after the install OS step in the task sequence.  I get the "An operating system wasn't found.  Try removing drives that don't contain an operating system" error.  I am able to get the
    machine to boot by swapping the hard drives' boot order, but the  task sequence won't complete after this.  The deployment works fine on machines with one hard drive, and I'm not getting any errors from the task sequence.  I'm deploying windows7
    enterprise x64 using MDT2013.  This is a new custom image and task sequence generated using MDT2013.  I can't remove the second hard drive because there are scripts that run on the second hard drive during deployment and also because I don't desire
    to remove and re-install 250 hard drives.  I've not experienced this problem with earlier versions of MDT.

    The bdd.log file you sent does not show two internal drives, it shows only one.
    Console > Please wait while DiskPart scans your configuration... ZTIDiskpart 12/16/2013 9:57:04 AM 0 (0x0000)
    Console > DiskPart has finished scanning your configuration. ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
    Console > DISKPART> ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
    Console > Disk ### Status Size Free Dyn Gpt ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
    Console > -------- ------------- ------- ------- --- --- ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
    Console > Disk 0 Online 60 GB 60 GB ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
    Console > DISKPART> ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
    Console > Volume ### Ltr Label Fs Type Size Status Info ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
    Console > ---------- --- ----------- ----- ---------- ------- --------- -------- ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
    Console > Volume 0 D DVD-ROM 0 B No Media ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
    Is this the problem?
    Keith Garner - keithga.wordpress.com

  • Windows deployment services in windows server 2012 : operating system not found

    Hello,
    In order of learning WDS in Windows Server 2012, I created a simple test environment composed of :
    A Domain controler running WS 2K12 and hosting both DHCP and WDS services. (with the option of not listening port 67 checked while installing WDS)
    A test computer, with no operating system
    I also added a Windows Server 2012 Standard WIM file and added also (located in [DVD]\sources\install.wim), boot file image (located in [DVD]\sources\boot.wim)
    But now, when i start the client, it gives the following error:
    While i don't find any reliable solution on Internet, Im looking for your help if ever, anyone faced this problem and found a solution for it or not
    Thanks in advance!
    Lotfi BOUCHERIT

    I find it strange that client and server IP are the same. Is there any sort of DHCP relay agent running on your WDS server ?

  • Operating system not found

    I received notice to update my bios on my Qosmio 530.  I followed the directions and this morning I got a message that the operating system was not found.  I went into bios - changed a couple of items that I thought should be enabled and then I accepted system defaults to save. 
    Now I don't know if the bios worked.  I'm doing my emails right now and when I'm done I will shutdown and start up again and see if I have the same problem.  I hope not.
    Ballina

    try unplugging the power cord and removing the battery then hold the power button for at least 30 seconds. reinstall the battery and try to start and see if it happens again. if this doesnt help try the same as before but this time just connect the power cord and try again. if still nothing try again and replace the battery and the power cord.
    there is no one on here from toshiba. this is just a user's forum. just people like you giving the best information they have.
    hope that helps
    -civicman4-
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

  • Operating system not found. No hard drive detected.

    I sent them a message and they told me they don't carry any Sony recovery CDs. Their going to charge me a large amount also.

     
    Hi Dantheman, 
    Welcome to Sony Community! 
    You may try Derp-Derpinson's suggestion first. If you'll get the same result then we can say that it a hardware issue. Yes, possibly the motherboard or the connection of the hard disk drive to the board. I will send you a private message for more information regarding this matter. 
    Thanks,
    Vincent 
    If my post answers your question, please mark it as "Accept as Solution"
     

  • What kind of hard drive do I need for my HP Pavilion dx6650us entertainment notebook PC?

    I have a HP Pavilion dx6650us entertainment notebook PC that has the BSOD. Even when I run it in SafeMode I have absolutly NO desktop. I've tried EVERYTHING. I have lost hope. So im just going to buy a new hard drive. Does anybody have ANY idea what type of hard drive I need and aprox. how much it might cost? Please let me know(: Thank you.

    It is a standard laptop 2.5 inch wide SATA hard drive like shown in this picture:
    Look at Page 9 of this Manual:
    Drive Manual
    This will show how to replace it. Do you have the recovery disks that you could have made when the laptop was new? If not you are going to have to get a Windows disk or some HP recovery disks.
    Here is a drive that would work for you.
    160 gig 7200 rpm drive for $45
    This drive will be faster than what you had and is a bit larger. A very good deal for the price. You perhaps already have a second hard drive in the system. See the manual on page 9 for the location of both hard drive bays. You could move the secondary drive (if there is one) over into the primary position without spending a nickel. In fact, that is a great idea. If you do that and still get the BSOD, then it might well be something else going on other than the hard drive. The hard drive is a likely issue but it could also be the memory and other things, too. However, I think the second drive is only found in the dx9000 models so do not be shocked if you do not have a secondary hard drive bay in your machine. I have never seen a dx6000 series but am pretty sure it is a lot like the dv6000 series of which I have seen more than my share. They have a lot of issues and I am concerned you will be spending money on a new hard drive that will not fix anything.
    Feel free to post back with issues or questions.

  • Product name: HP Pavilion dv2911us Entertainment Notebook PC Laptop failed to start up

    Product name: 
    HP Pavilion dv2911us Entertainment Notebook PC
    Problem:
    Failure to start up. Upon trying opening the laptop, the following lines, in quotations,  were displayed.
    “ Windows Resume Loader
    The last attempt to resume the system from its previous location failed. Attempt to resume again?
    (use the arrow keys to highlight your choice)
    -          Continue with system resume
    -          Delete restoration data and proceed to system boot menu “
    Surely, I have chosen the option “Continue with system resume”; however the display remained black but the laptop acted as if it was on because about 5 minutes later, the side of the laptop was warm as if it was working regularly.
    Can you please diagnose the problem and tell me what to do? 
    Ps. operating system :windows 7

    Welcome RD13.
    Try booting into SAFE MODE.
    Then shutdown.
    Then try to reboot.
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

Maybe you are looking for

  • Gather_database_stats_job_proc / gather auto

    Hi, I am trying to understand exactly what gather_database_stats_job_proc does, and how it uses the "gather auto" option. I've read article :http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14211/stats.htm#sthref1429 The GATHER_DATABASE_ST

  • Unicode type not convertible

    Hi, Need some help in modifying the code ... I am working on a mass download of data into a texr file from the tables. Few of these tables have fields in decimal or currency and I  need to read them into character string. I know the structure of the

  • Program Units or Call to DB Procedure ?

    Hi This is a general query - Which method is better - to write db procedures in the program units itself or write the procedure in the DB (SQL *PLUS), and then add the call to the procedure in the forms. Since, both method can be adopted, which is th

  • Unreachable Agent

    I'm new to the tool and have OEM installed on 1 server. The status of the 1 host I have an agent is "Agent Unreachable". I have ensured that an agent is running on the server. The agent appears to be running on port 1831. When doing emctl status agen

  • Installing Application Express

    hi all, I followed the instructions of installing Oracle Application Express on Oracle DB 10g R2 for Windows 2003. When I reached to the following step: @htmldbins password sysaux sysaux temp /i/ it prompted me the following on the command line: ente