HP Pavilion dv6700 CTO Notebook PC and I hook to HDMI cable and connect to tv and get no sound
i have a HP Pavilion dv6700 CTO Entertainment Notebook PC and I hook to HDMI cable and connect to tv and get no sound when attached to tv. I attach the cable get the video but no sound. I check sound and do not see anything other than the altec lansing speckers and realtek. Th altec lansings are the default. Help
Hello gman0700.
Welcome to the HP Forums. I understand you are unable to produce audio through an HDMI connection. I apologize for the late response, but I will do my best to assist you. Before anything else, please answer these questions:
1. What is the current computer's operating system? Does the same behaviour occur on multiple operating systems?
2. The title seems to imply that there is no audio when connected to a television, using HDMI. Does this only occur when you connect to a television? Will it occur if you connect to something else using HDMI?
3. Have you tried connecting to a television using VGA or DVI? If so, what are the results?
As an additional suggestion, for now, I would review the television's manual to confirm that everything is correct from the television's standpoint.
Please post this information as soon as you can. Thank you posting on the HP Forums. Have a great day!
Mario
I worked on behalf of HP.
Similar Messages
-
Upgrade for HP Pavilion HDX9300 CTO Notebook PC
Good morning people!
I have one HP Pavilion HDX9300 CTO Notebook PC and have some questions:
I am wanting to upgrade my HD drive for a SSD model and increase my DDR memory.
I know my memory operates at a frequency of 667 MHz but need to know if my notebook includes an upgrade to 8GB and what would be the ideal brand of memory card to do this.
I also need models of HD 480GB SSD compatible with my notebook.
Thank you all and sorry for english, I'm brazilian.I checked out you service manual and it says the maximum amount of memory it can take is 4 GB or two 2 GB sticks.
I also went to Crucial and there memory advisor does confirm this.
http://h10032.www1.hp.com/ctg/Manual/c01279508.pdf
http://www.crucial.com/store/listparts.aspx?model=Pavilion%20HDX9300%20CTO&Cat=RAM
Crucial also gives you a bunch of different options for an SSD as well. It says that the 512 GB SSD will work, but it is expensive. Stick with a quality brand name like Crucial or Kingston. Avoid buying from e-bay.
When it comes to memory though just because the manual says the max is 4 GB does not mean that it can take more.
You can try installing two 4 GB sticks and it may work, it won't hurt the laptop to try, but there is no guarantee that it will work.
Keep in mind too that if you're running a 32 bit operating system it won't recognise a little more then 3 GB of memory anyway. -
HP Pavilion dv6700 Entertainment Notebook PC
HP Pavilion dv6700 Entertainment Notebook PC (year 2007)
(not sure if it's running Windows Vista or Windows 7?)
QUESTION: HOW DO I MANUALLY RESET THE LAPTOP TO ITS ORIGINAL FACTORY SETTING?
I never set up any type of recovery disc, etc. when I originally bought it. MUCH THANKS!!johnsmith,
Go through these links:
http://windows.microsoft.com/en-IN/windows/which-operating-system
Windows 7:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01867418
Windows Vista:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00809678
If you are not able to do recovery from the Recovery partition that's present in your hard drive already or if recovery partition is deleted or corrupted, you can order the recovery discs/USB:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&dlc=en&lc=en&product=3636595
Contact HP:
https://h22207.www2.hp.com/us-en/contact-hp/product/HP-Pavilion-dv6700-CTO-Entertainment-Notebook-PC...
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP** -
I have an older Macbook pro with a dvi output and I want to watch movies on my tv. I have a dvi to hdmi cable but the only image I get on my TV is my desktop background. None of my movie players with appear on the TV screen. What am I doing wrong?
Hi Maryan,
Open System Preferences > Displays > select the window for you external monitor > click on the Arrangement tab and check the box next to Mirror Displays. It may be slightly different in Lion, but the idea is the same. -
I will be using a HDMI cable to connect an Apple TV box and a Comcast cable TV box to my TV. My TV has only one HDMI port.
To do this I will need a 2x1 HDMI splitter or a 2x1 HDMI auto switch (preferred).
?Is there any Apple TV HDMI port voltage?
When using a HDMI auto switch to connect two devices to a HDMI TV, the
Auto switch cable box only works for components that do not output continuous voltage over HDMI port when turned off.
Do you know of any other solutions? Componets? Actual expierances?
Full text below.
Cable : HDMI switches expand the number of available HDMI ports on a high definition television allowing connection of cable boxes, Blu-ray players, and game consoles. A side benefit is that cable clutter is also eliminated by running a single HDMI cable to your HDTV from a switch and relocating the HDMI ports to a concealed location. The problem with most HDMI switches is that you have to either get up to push a button, or hunt for the remote control, to switch sources. The true mark of any great switching component is an ability to perform its function and remain transparent in its operation. This automatic HDMI switch is a plug-and-play away from offering everything you are looking for in an HDMI switch. Select a single output from up to three devices for signal delivery to your HDTV. Smart operation provides complete control for connect-and-forget operation. Powering on a device gives it output priority over the other devices. By powering down the device in use, output priority is returned to the last powered on device. Note: Auto switch function only works for components that do not output continuous voltage over HDMI port when turned off.
Here is a typical HDMI 3-in 1-Out HDMI Auto Switch
http://www.google.com/products/catalog?q=hdmi+auto+splitter&rls=com.microsoft:en -us&oe=UTF-8&startIndex=&startPage=1&rlz=1I7GGLF_en&um=1&ie=UTF-8&tbm=shop&cid=1 0340892278237558532&sa=X&ei=fTPmTtOiHuXq0gGc3sHfBQ&ved=0CHsQ8wIwAA#
Thanks for any help. Sincerely,
HDMI auto switch?Hi Erico,
I tried what you said again but without success. I even updated the driver so that that audio driver is the same as the graphics driver i.e.. NVIDIA but this has not helped either:
Do you have any other ideas?
Many many thanks,
Louise -
How can I connect my Ipad Air to my PC to see the Ipad screen on the PC?
I have connected them via the Ipad to a LIGHTNING DIGITAL AV ADAPTER-ZML connected to a APPLE HDMI TO HDMI CABLE (1.8 M)-ZML, and to the HDMI port on the PC. But now I don't know how to show the Ipad screen on the PC, as if it was a monitor / screen, so that I can then use Lync and share my PC screen with people virtually.
Thanks for any help! RegardsHi Rob - thanks so much for your help! Could you tell me what "air sever or reflector apps." are? and where can I look for information about them?
Do you use them on the Ipad or on the PC?
Do I need a cable too and which one?
Sorry... I am not very technical as you can see, thanks for your help.
Regards -
I connected my iphone 4 to itunes and it automatically updated, now I am connected to icloud and all my pics are gone. Also, I have all my sons contacts on my phohe. How do I get my content back to the prior state?
Hey kaylactm,
Thanks for the question. I understand how frustrating this may be. To resolve your issue, it may be necessary to restore your device in recovery-mode:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
Im Trying to re-Activate my ipod touch cause i have just restored it and on my ipod screen it has connect to itunes and on itunes i get a message "We are unable to activate at the moment please try again later" somthing like that please help :(((
HELP!!!!Zoom in to read pleasebut can not be unlocked
If the phone was NOT unlocked, it can't work or be activated with any other carrier than AT&T. It CAN'T be used with Tigo or Movistar.
Your post makes very little sense. Maybe you can get some help with English. -
I have a problem with the external sound of my iPod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?
- Try insering and removing the headphone plug a dozen times or so.
- Try cleaning out the headphone jack in the iPod.
- Resett he iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restoe to factory defaults/new iPod
If yu still have the problem that indicates a hardware problem, likely a bad headphone jack. Yu can make an appointment at the Genius Bar of an Apple store to confirm.
If not underwarranty Apple will only exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
A third-party place like the following is less expensive. Here is one. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
On 01/22/2013, facetime will not connect to my husband's phone. We talked this morning at approximately 8am PST and since then it just goes to connecting...and stalls...whats the problem?
Nobody here would know what the problem is.
-
My Macbook doesn't have an HDMI port, so I bought a converter. So I now I have my HDMI connected to my Mac and my TV. The problem is, I can't figure out how to make my computer screen show up on my TV. Do I need to download different software or update something? Or is it as easy as changing a setting?
When I go to my display settings, my computer screen shows up as an option, but my TV does not. I don't think my computer is reading it is connected. Please help me.
I will openly admit that I don't know very much about computers, so if you can help me, please break your explaination down for me. This is the info for my Mac:
I have a Macbook Pro 13-inch,
Mid 2010 OS X
Version 10.9.3
Processor 2.4 GHz Intel Core 2 Duo
Memory 4GB 1067 MHz DDR3
Graphics NVIDIA GeForce 320M 256MBI am assuming that you are using a Mini Display to HDMI converter and then a HDMI cable.
Have you opened System Preferences>Displays and selected Detect Displays?
Ciao. -
I have a Sony Camcorder DCR-TRV33 and have hooked the firewire cable to my iMac. However, it doesn'
I have a Sony DCR-TRV33 camcorder and it hooked to my iMac with the firewire cable but the iMac doesn't seem to recognize the camera. The camera is set to VCR. This particular model is not included in the supported camera list for ilife but seems to be compatible from everything else I have read. Anyone have any ideas as to what to do??
To import from this camera, you need a Firewire cable.
Sony's name for FireWire is i.Link, so that is where you need to plug in.
If you have a relatively new Mac, it will have Firewire 800. You will need a 9 pin to 4 pin Firewire Cable. You can find them inexpensively at www.monoprice.com. If you have an older iMac, it may have Firewire 400 (or it may have both). In this case, you need the 6 pin to 4 pin Firewire cable. Some companies sell adapters that will convert a 6 pin to 4 pin cable to 9 pins. Avoid these. They do not work. -
My apple TV is not working. It is showing the Itunes log with the white sync cable. it has been like that for days.
That means you have to hook it up to your Mac/win PC and restore it from within iTunes using a micro-USB cable.
-
Which Firewire Cable to connect an iMac and a Mac mini ???
Hi guys
What Firewire cable should I buy to connect an iMac G5 and a Mac mini G4 and use a partition on the mini as a Target Disk?
I've read something about 4 pin, 6 pin, 9 pin... 400, 800
I have no idea what type of cable I have to buy and if it makes different about performance...
Cheers!No, you need a FW400 6-pin to 6-pin cable and they are all the same. FW800 has an entirely different connector and neither the iMac nor the mini have it. It might be called IEEE1394 or iLink on the package, but it is all FireWire 400 in stores generally. I have never seen a FW800 cable in a regular retail store.
-
I am using a 17inch macbooj pro that i bought in Jan 2012. Runs Lion 10.7.3. I used a second non apple screen and used a thunderbolt (DVI to thunderbolt) adaptor to used my screen. However everytime i do this my macbook pro loses its internet connectivity. I also use the firewire for my audio external soundcard but dont think this makes any difference.
Any help please?When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
Maybe you are looking for
-
Exchange rate and PO printing form
Hi Experts I hale problem with PO printing form. I have to add one field to layout. Itu2019s exchange rate. We have price condition defined in inforecord in USD. This price is change to local currency, and based on this system calculated value of t
-
I have been receiving the error "We could not complete your iTunes Store request. An unknown error occurred (11111). There was an error in the iTunes Store. Please try again later." This has been happening for 3 days. I cannot find mention of the (11
-
Hi: I have a ipad 2 and when taking are blurry photos in low image quality. I have to do something to improve the image quality? I wait your comments...Thanks.
-
Printer not connected error in 10.10.3
I'm getting "Printer not connected" now since I've upgraded to 10.10.3 on my Epson WF-3540 on my MBPr. My two other Macs are not having this issue, one of which is also 10.10.3 and the other 10.10.2 (a MacPro and MBP respectfully). I have tried the f
-
Lists of client install error codes
SCCM2012, Primary site, trying to push out clients. Anyone know where a complete list of "Last Installation Error" exists? I've come across the ones below, but I'm having many others that I cannot determine what the installation error refers to. Jus