HP Pavilion dv7-3069wm touch controls not working

Above the keyboard, next to the power button there was a lit up mute, volume control, and wireless control. At one point the wireless and mute button stayed amber until I did a hard reset. Now they are completely gone. The volume control and DVD controls are lit up white, but don't work. The Quick Launch icon is also gone.
The HP Quick Launch software has been update, but still nothing. I've installed the latest BIOS, but that didn't help either.
Does anyone have any suggestions? The laptop is out of warranty.

I have a diferent problem but its also with a  Pavilion dv7-3079wm. I bought it in february 9 of 2010 and today when i check the warranty i discovered that was allready finished.
When i have like an hour or hour and a half using the internet or word or just listen music, suddenly the laptop stop working and the image on the screen gets frozen. Anything works and i have to shut down by the power button.
It takes like 15 minutes to restart again.
But if i just started to use it and open a videogame (age of empires) or a program which needs more graphic memory (archicad 12)  the computer stop working at 5 minutes.
Does anyone have the same problem???  Someone told me that the video card its damaged on this models, it's that true???
Atte: Zombi

Similar Messages

  • Help! Pavilion Dv7 Integrated mic array not working!

    Ok ive looked at many forums and couldnt find a solution i recently booted my laptop and didnt have a driver backup so i manually downloaded and installed all the correct drivers everything seems to be functioning correctly accept the mic. in the recording section of the sound control panel all i see is external mic, integrated mic, and stereo mix. my problem is that when i listen to my int. mic array all i hear is static, i turned down the levels and it still didnt work; i updated but the problem kept occuring. any help; i think its the idt codec idk but help please!

    Raddy_Srey
    The following steps were posted by @DavidPK. I am copying the steps I want you to try rather than just linking you the thread as it is quite long. I am also providing a link to the thread below.
    “Right click the speaker icon in the Taskbar and select Playback Devices. Click the Recording tab, right click the 'Integrated Microphone array' and select Properties. Click the Microphone Enhancements tab and put a tick in the box next to 'Disable microphone enhancements'. Click Apply and Ok to save this change and the restart the notebook - has this made any difference?”
    The thread named “ internal microphone not working on pavilion dv7” is linked below.
    http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and​-Audio/internal-microphone-not-working-on-pavilion​...
    If this does not resolve your issue please re-post so we can continue.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Hp pavilion dv7 notebook numeric keypad not working

    The numeric keypad on my hp pavilion dv7 notebook does not work.  I can't get the num lock to work or any of the number keys to respond.

    Hi,
    While this could be a hardware issue, it's always worth trying the following.
    Open windows Control Panel, open Device Manager, expand Keyboards, right click the entry 'Standard PS/2 Keyboard' and select Uninstall.
    Shutdown the notebook.
    Then unplug the AC Adapter and then remove the battery.  Hold down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Note:  If the keyboard doesn't work when trying to access or navigate the Bios Menu, then this is probably a hardware fault.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Pavilion 23tm Monitor touch screen not working

    Hi, We bought a Pavilion 23tm Monitor today and touchscreen is not working.
    Chat to one of your tech support and he remotely access my computer and tried to get it working but failed. So he told me to go to australia website. I tried to get contact through technical support but when I get to the page to find the product it can't find the product. I've put the Product name and even the Product number but no luck.
    Can someone please help me enable the touch screen on the monitor pls. 
    I am using a laptop and connected the laptop through HDMI.  
    I have installed the cd that came with it also.

    Hello Belle07,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you are having issues getting your new HP 23tm Monitor working and are looking for Technical Support in your area. I am providing you a link to thTechnical Support Contact Page for Australia.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • HP Pavilion 11 x360 - touch screen not working after upgrading to Windows 8.1 Pro

    I installed windows 8.1 pro and now my touch screen isnt working. i checked system screen and it says NO PEN OR TOUCH INPUT AVAILABLE  
    and i have 2 keys swoped on my keyboard. The @ and " i

    Hello theow,
    Welcome to the HP Forums!
    I understand the touch screen on your notebook is not detected after updating to Windows 8.1. 
    This would be the best place to start: Troubleshooting Touch Screen Issues in Windows 8. This is a great document that covers touchscreen issues from start to finish. Do not be alarmed that it states the document pertains to TouchSmart PC's, as the steps are the same.
    It would also help to know which product you are using so I can give you more detailed information, such as driver downloads.
    For information on finding your product and model numbers click here: How Do I Find My Model Number or Product Number?
    Hopefully this gets you going!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • HP Pavilion model DV6 Touch Panel not working

    Hi everyone , i recently experience my touch panel freezing again so i performed a hard reset to fix the problem but after doing that both the sound and wireless icon dont show at all to touch leaving only the volume icon which is visible to touch. Even with the volume visible when i touch to reduce or increase the volume it doesnt work at all. A picture here showing how it looks like in case you dont get exactly what am saying. Anyone with the solution kindly help me out. Would be grateful
    Kind Regards
    Max

    Hello quame,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number we can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • HP Pavilion Volume Touch-Pad NOT WORKING | NO SOUND HELP

    HP Pavilion Volume Touch-Pad NOT WORKING
    I have an HP Pavilion dv3t - 2000, Windows Vista computer. 
    SOMEONE DID ALREADY HELP ME HERE WITH THIS PROBLEM BUT THEY STOPPED RESPONDING | Please check that link out!
    The volume touchpad above the keyboard is not working properly (There is no sound coming out of the speakers or the headphone jack) , If you touch the megaphone part of the touchpad above the keyboard then it stays red, however the sound icon on the taskbar changes from mute to unmuted when you touch the red megaphone. The volume slider on the touchpad works suprisingly.
    I don't know if I uninstalled something or what but I need this problem fixed!
    Thanks!

    Hi,
    Shut down the notebook, unplug the AC Adapter and remove the battery.
    Follow the procedure detailed on Page 63 of your Maintenance & Service Guide to remove the RTC battery.  Hold down the power button for 30 seconds.
    Leave the notebook for 10 minutes and then re-insert the RTC battery, re-assemble and replace the cover, insert the battery, plug in the AC Adapter and start the notebook.  Tap away at f10 as soon as you start the notebook to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    If you still have no audio and the installer you downloaded previously still doesn't detect the Hardware, it would start to look like a Hardware failure, but to try and rule out any further software cause, try the following.
    Follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run.  The 'Try it' option runs the OS from the CD without the need to install on your HDD.  If this runs Ok ( it will be slow running from a CD ) and you still have no audio output, this would tend to confirm a Hardware issue.
    http://www.ubuntu.com/desktop/get-ubuntu/download
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP Pavilion Volume Touch-Pad NOT WORKING | NO SOUND

    HP Pavilion Volume Touch-Pad NOT WORKING
    I have an HP Pavilion dv3t - 2000, Windows Vista computer. 
    The volume touchpad above the keyboard is not working properly (There is no sound coming out of the speakers or the headphone jack) , If you touch the megaphone part of the touchpad above the keyboard then it stays red, however the sound icon on the taskbar changes from mute to unmuted when you touch the red megaphone. The volume slider on the touchpad works suprisingly.
    I don't know if I uninstalled something or what but I need this problem fixed!
    Thanks!
    This question was solved.
    View Solution.

    Hi,
    Shut down the notebook, unplug the AC Adapter and remove the battery.
    Follow the procedure detailed on Page 63 of your Maintenance & Service Guide to remove the RTC battery.  Hold down the power button for 30 seconds.
    Leave the notebook for 10 minutes and then re-insert the RTC battery, re-assemble and replace the cover, insert the battery, plug in the AC Adapter and start the notebook.  Tap away at f10 as soon as you start the notebook to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    If you still have no audio and the installer you downloaded previously still doesn't detect the Hardware, it would start to look like a Hardware failure, but to try and rule out any further software cause, try the following.
    Follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run.  The 'Try it' option runs the OS from the CD without the need to install on your HDD.  If this runs Ok ( it will be slow running from a CD ) and you still have no audio output, this would tend to confirm a Hardware issue.
    http://www.ubuntu.com/desktop/get-ubuntu/download
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • My iPod touch is not working in iTunes, but it is showing up on my "My Computer".

    My iPod touch is not working in iTunes, but it is showing up on my "My Computer". The instructions from Apple Support is NOT effective. Please help.

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Touch pad not working with HP G60 operating on Windows 7

    I have a HP G60 operating on Windows 7 (not sure bit) and have problems with touch pad not working.
    I was using touch pad and wireless mouse interchangeably for past year.
    No recent changes made to system. Suddenly not work one evening. Have tried shutting down and left overnight which has not resolve problems.  On one occasion, i was not even able to type and that resolved after re-starting computer.
    There is a button between space bar and top of touch pad which is white. Even when i press and turn red, it has not changed situation. Therefore I have to use my wireless mouse to operate for the moment. 
    Would appreciate any advice about what is the problem and ways to resolve it.
    Thanks a lot!
    Mo

    Hi,
    The numbers are fine
    Try the following.
    First, ensure the Touchpad is switched on ( the light between the Touchpad and the Spacebar should be white ), then download the latest Synaptics driver installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp44501-45000/sp44940.exe
    Next, open windows Control Panel, open Programs and Features, right click the entry 'Synaptics Pointing Device Driver' and select Uninstall.
    When this has completed, shut down the notebook, remove any external devices connected to the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    When windows has fully reloaded - it will automatically load a generic driver for the Touchpad, but just let it do this.  Then open your Downloads folder, right click the Synaptics installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP Pavilion g6 Notebook PC - Keyboard not working

    HP Pavilion g6 Notebook PC - Keyboard not working
    My Windows 8 - 64 bit  laptop keyboard stopped working. I tried to uninstall and reinstall as explained in the support pages. but doesn't seem to work.  Is it dead?   what is the solution.  Please help
    Thank you

    Hi,
    While this could be a hardware issue, it's always worth trying the following.
    Open windows Control Panel, open Device Manager, expand Keyboards, right click the entry 'Standard PS/2 Keyboard' and select Uninstall.
    Shutdown the notebook.
    Then unplug the AC Adapter and then remove the battery.  Hold down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Note:  If the keyboard doesn't work when trying to access or navigate the Bios Menu, then this is probably a hardware fault.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • IPhone 4 touch screen not working

    iPhone 4 touch screen not working properly. Sometimes it activates icon itself. After updating to iOS 6.12, it stop working totally.

    Good Morning S.GOPINADHAN,
    I understand your iPhone screen is black and you are not able to turn it on.  The article below will explain what to do when your iPhone is not responsive.  I'll also include instructions on how to back up your iPhone when you are able to turn it on.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    https://support.apple.com/en-us/HT201412
    iCloud: Back up your iOS device to iCloud
    https://support.apple.com/kb/PH12520?locale=en_US
    Regards,
    - Judy

  • My HP-Pavilion dv6 web cam is not working properly, fluctuating always

    My HP-Pavilion dv6 web cam is not working properly, it is fluctuating always

    re-install drivers and try again. ( also easy capture )

  • TS1398 Hello, my iPod touch is not working right. It says its connected but if I select App Store, safari and other apps that require wifi pops out a note saying either"error loading" or "cannot connect to iTunes Store" and would exit the app automaticall

    Hello, my iPod touch is not working right. It says its connected but if I select App Store, safari and other apps that require wifi pops out a note saying either"error loading" or "cannot connect to iTunes Store" and would exit the app automatically. Please help.
    Thank You.

    See:
    Can't connect to the iTunes Store

  • TS1398 the wi-fi tool on my ipod touch is not working.

    the wi-fi tool on my ipod touch is not working. i even can't turn it ON

    See here: iOS: Wi-Fi or Bluetooth settings grayed out or dim
    Note that if none of the suggestions resolve the issue, it's likely hardware related, meaning you'll need to have your iPod serviced or replaced.
    B-rock

Maybe you are looking for

  • EFI update for the mid-2010 15" MacBook Pro?

    Hi, I was wondering if Apple enabled the Lion Internet Recovery feature for the Mid-2010 MacBook Pros in the new round of EFI updates released yesterday. I know that they already did this for the 13-inch weeks ago but I wanted to make sure they expan

  • OAM WebLogic integration issue

    Hi I have integrated portal application hosted on WebLogic with OAM using SSPI. The integration is successful and the application is working fine but we see following Error message in the weblogic logs whenever user hits the Portal home page. <Dec 2,

  • Request for Trnxn code

    Hi Please let me know the transaction code used to configure timeout settings (eg: 10mins,15mins,.....) for a particular client. Thanks and Regards Vidya

  • Disappearing personal settings in Safari

    for like the 3rd time since i installed leopard, my personal safari settings, like user id/password for all websites it used to remember are suddenly gone! i did not even look at, nor do anything with the keychain app, nor purposely clear the cache!!

  • Conversion from 2013 to 2011

    Hi,     can you the attached file from 2013 to 2011 version. Thank you