HP Pavilion dv7-6010ev Amd-Drivers for Windows 8

The Radeon 6700m is not working properly in windows 8. Need drivers!

Hey TheoKaz,
Here is a tool that should help you locate a driver if one is available. http://goo.gl/M6Ud
Currently HP is still testing the Notebook to see if it will support 8. Once they are finished I'm sure they will release the drivers as soon as possible.
Please bare with them.
Now, knowing you have switchable graphics which will be a hit or miss with your upgrading to Windows 8.
THX

Similar Messages

HP Pavilion dv7-1250en Audio Driver problem for Windows XP SP3 x86

Hi. I have installed Windows XP SP3 in HP Pavilion dv7-1250en and has found all drivers except Audio Driver for Windows XP SP3 32-bit.
Everest found 2 Audio device
1) IDT 92HD71B7 @ Intel 82801IB ICH9 - High Definition Audio Controller (A-3) PCI
2) nVIDIA HDMI @ Intel 82801IB ICH9 - High Definition Audio Controller (A-3) PCI
Please help.
Thanks in advance.

Try sp41693
IDT High-Definition Audio CODEC Driver,
sp41693, vista driver, reported work in XP here
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

HP Pavilion DV7 2206TX - DVD drive reads DVDs but not CD's

My HP Pavilion DV7 2206TX - DVD drive reads DVDs but not CD's.
When I insert a CD, the drive tries very hard to read the CD but gives up after about a minute.
I get no error message. I do not see the Auto play message.
Windows Explorer does not recognize the DVD drive.
When I insert a DVD, I get the Autoplay menu, Windows Explorer recognize the drive and the DVD. I can play the DVD using any number of Video players.
I would welcome advice relating this problem.

your HP Pavilion needs a new DVD driver. I ran into many problems such as this when troubleshooting computers in school.
A DVD drive should play CD at any time: While a CD driver will not play a DVD disc. Do not think there is a problem with sofware because it will only throw your troubleshooting skills out the window and it will confuse you.

HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit

Hello,
For some time now I have been unable to scan or print from my desktop (Windows 7 Professional 64bit) and I have exhausted too much effort and am now bringing it to the masses.
The problem:
Printing: Currently receiving an "Error - Offline" message in my printer queue at all times.
Scanning: Scanning has never fully worked on this desktop. I am always unable to communicate with the printer. (Though webscan works through accessing the printers IP address)
Things I have tried:
Ran HPPSDr, followed directions (Unpluged power to printer, turn back on, restart computer) brings me to this website after it cannot fix. (Note that while the HPPSDr is running it always notions that there is a driver problem)
Uninstalled Drivers from CD-ROM, re-installed, countless times
Installed "Windows 7 Pro 64 bit drivers" from the HP website and uninstalled, countless times.
Attempted to set a static IP and use "Update IP Address" to point specifically at the printers IP.
Installed Drivers and finding the printer myself through it's own static IP address.
Turned off firewall and attempted to print (after reboot), same errors
Setting up the printer on all of my laptops (3) wirelessly to attempt to find if there is a problem with the printer or static IP. (1 is Windows VISTA 32bit and the other 2 are Ubuntu 32bit). All laptops are able to use the printer wirelessly without any problems.
Read all of the forums about this issue and attempted all of the 'solutions'. Although I mostly don't see that anyone with this same problem is resolved, unless I'm missing the perfect post.
Things I have not tried:
Plugging the USB directly into the desktop. (This seems self defeating as the purpose for this printer was to be able to print wirelessly to it from across the room)
Re-installed Windows 7 Pro 64bit (Trying to avoid this, would rather just print from laptops)
You tell me
Curiosities:
I have noticed strange things that make me believe the driver is somehow incomptable with my OS. Here is a shot of the properties of the printer:
Weird that it is not recognizing the model number.
Also in the Printer Settings when I go to the port tab, there is no port selected, if I try and tab away it forces me to select a port, yet when I do and 'apply' and then re-open the Printer Settings in the ports tab; it has again unselected the previously selected port.
Theories:
I feel like my OS is just refusing to notice the IP address for the wireless printer, no matter what I have it set to, even if it's dynamic. It's like the driver for Windows 7 Pro 64bit is actually not the correct driver for my system.
Anyways, another thing to mention is that I am not currently willing to wipe my operating system and re-install Windows 7 Pro in order to resolve this just yet. I want to see if anyone else has any other avenues I can try before even beginning to consider that.
Anyways, thanks in advance for taking the time to read my ramblings and hopefully someone who has resolved this issue can help me.

Hi Zerosouls,
I understand you are having an issue with HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit.
First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
Restart the computer after this step and try installing Hp Officejet 6600 again.
Please let me know what happens
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Portal drive software for Windows 7 (64-bit)

Hi...Experts
We could not find the portal drive software for Windows 7 (64-bit) OS on service market place. The one which is available on market place is working fine for Windows 7 (32-bit ) but it does not work for 64-bit.
Can any one help us to get the 64-Bit Portal Drive
Rgds
PR

1- Set BasicAuthLevel's value to "2" by expand HKEY_LOCAL_MACHINE >> SYSTEM>>CurrentControlSet>>Services>>webClient>>Parameters
2- Restart your computer.
3- Right click "Computer" and click "Map network drive..."
To Letter Field: Set a free drive letter.
To Folder Field: Assume that your webDav address is http://abc.com:50000/irj/go/km/docs/ change it to
abc.com:50000irjgokmdocs
4- Enter your ID an Password
thats all...
Note: The mapping is as follows:
0 - Basic authentication disabled
1 - Basic authentication enabled for SSL shares only
2 or greater - Basic authentication enabled for SSL shares and for non-SSL shares

SCCM Driver Packs for Windows 8

We have several SCCM driver packs for Windows 8 available now...
ThinkPad L430, L530
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_l430-l530_w832_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_l430-l530_w832_201210.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_l430-l530_w864_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_l430-l530_w864_201210.exe
ThinkPad T430(s,i), T530(i), W530
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_t430x-t530x-w530x_w832_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_t430x-t530x-w530x_w832_201210.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_t430x-t530x-w530x_w864_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_t430x-t530x-w530x_w864_201210.exe
ThinkPad X1 Carbon
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x1carbon_w832_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x1carbon_w832_201210.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x1carbon_w864_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x1carbon_w864_201210.exe
ThinkPad X131e
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x131e_w832_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x131e_w832_201210.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x131e_w864_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x131e_w864_201210.exe

Adding X230
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x230x_tablet_w832_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x230x_tablet_w832_201210.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x230x_tablet_w864_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x230x_tablet_w864_201210.exe

Model 15-d006TU all driver link for windows 7

plz plz plz
model 15-d006TU all driver link for windows 7

Hi:
I have already answered your question yesterday.
http://h30434.www3.hp.com/t5/Other-Desktop-PC-Questions/32-bit-driver-for-windows-7/m-p/3481621
Your notebook is not supported by HP for windows 7 32 bit.
You have to use drivers from other notebooks and manufacturers websites.
If those drivers don't work, then you need to install W7 64 bit.
Asking the same question every day will get you absolutely nowhere.

Pavilion Dv7 4165dx Hard drive failure and performance issues?

I have a pavilion dv7 4165dx notebook that was working great until a couple of months when the performance of my machine started to decrease rapidly. I have performance issues with the machine because it takes 1 to 2 minutes to get from the welcome screen to the actual desktop and another 3 to 4 minutes for it to be ready to use. I already upgrade the memory from 4gb to 8gb but instead of going faster it goes slower and i also did a clean install of windows but it didn't help. Before i have problems it took maybe 30 to 50 seconds to go from the welcome screen to the actual desktop and 1 minute and 30 seconds to be ready to use and by the way i use soluto to tell me when the machine is ready for use.Then last week i notice that the headphone jack wasn't working properly so i contact hp and they told me to send them the laptop so i did, they replace the motherboard and they send it back to me and i just got it today it got a little better but it still lags on the welcome screen and to open programs. I check the memory using memtest 86 and the memory it's fine, but i check the hard drive with HDD Regenerator 2011 and it show i have one delayed sector. Then i check on hd tune pro and it show me some WARNING on section Calibration retry count( as you can see on the picture below) so my question is should i be worry and send it back to hp or what can i do to fix the problem i am having with this notebook?

I have the same laptop and have had issues with it since the day i brought it home. I have had it for a year now and am now replacing the hard drive for the 3rd time. My guess would be its your hard drive because most of the issues you seem to be having ar the same ones ive been dealing with for a while. I can say I'm very mad about the quality of this laptop and am in the process of battling with HP over this issue. If you have a chance go online and look at all the hard drive issues that this laptop has had and even look at the HP forums for this issue it will irritate you and make you wonder why this hasn't been fixed yet!

HP Pavilion DV7-7008tx Laptop - Raid 1 for two 1TB HDDs?

HP Pavilion DV7-7008tx Laptop
B3K25PA#ABG
Windows 7 Home Premium
Hi,
I have a Pavilion DV7 with two 1TB HDDs and a 32GB m-sata cache/ssd.
I would like to put the two HDDs into a RAID 1 (mirror) array.
When I enable RAID I loses the ability to boot into Windows.
I have verified that the Laptop will run the two HDDs in RAID 1 as I can run a Linux Boot disk ahd then boot into Windows 7 succesfully.
Something in the Raid /Boot configuration is not allowing the Laptop to boot directly into Windows.
Any ideas or instruction would be helpful please?
Regards
Gazman

Hello @Micro-Motive ,
Welcome to the HP Forums!
I understand you're having issues booting after setting up RAID 1 on your DV7-7008tx notebook.
When setting up RAID 1 mirrors you need to enable the feature and then format the drives. After they have been formatted Windows must be reinstalled. If you have not already done this, please try it now and let me know if you still have the problem.
Why: Enabling the Raid 1 feature does not automatically mirror the drives. The Boot MGR is looking for the content on both drives but is only finding it on 1 and thus fails to load.
I think it's also important to explain that setting up RAID 1 with a 32GB SSD flash along with a 1TB mechanical drive is going to drastically reduce your storage space. RAID 1 mirrors the content on both drives so it can read from both at the same time, increasing read and write speeds. The downside to this is that the mirror only works to the extent of the smallest drive. Thus, your turning your 1TB drive into a 32GB drive.
See here for more information: Chapter 19. GEOM: Modular Disk Transformation Framework This article is for FreeBSD users, an open source Unix-like operating system but the same rules apply as RAID support occurs at the BIOS level.
What you may want to do is install a hybrid drive. A hybrid drive will allow you to use the speeds of SSD at a fraction of the price. You can read about this here: Hybrid hard drives: How they work and why they matter.
Let me know if you need any more information or if installing Windows after enabling RAID 1 does not work.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

How can I transfer files off an external hard drive formatted for windows?

I just bought my first mac (yay!) and am trying to transfer my files off of my old pc. The problem is that I stored all my personal files on an external hard drive, which is of course formatted for windows. My mac will open it, but it is "read only." I tried plugging it back into my pc and using the Migration Assistant to transfer my files over, but it was not detected (rest of the pc was).
However, the second time I tried plugging it in to my pc, it told me it would need to be formatted first. Obviously my mac has changed something on it, and now all my personal files are on a hard drive that is unusable by either my old pc or my new mac!
Any suggestions would be appreciated! Heads up though, I am not especially computer literate, and my pc needs to stay intact as the husband needs it and some of the programs on it for school. Also, I have a second external hard drive that is brand new with nothing on it, if that will come in handy.
Thanks!

Format the extra HDD to EXFAT as previously indicated. There are two ways that can use to transferr the data.
1. Connect both drives to the PC and the copy the files to the newly formatted (EXFAT) drive from the HDD with the data . Then connect the EXFAT drive to the MBP and transfer the data to same.
2. Connect both drives to the MBP and open DISK UTILITY>RESTORE. Drag the drive with the data on it to the 'Source' field. Drag the EXFAT drive to the 'Destination' field. Click on the 'Restore' butt is on. After the transfer has been completed, close DISK UTILITY and place the data on the MBP where you want it.
Ciao.

Nvidia Geforce 650m driver problem for windows 8.1 on macbook pro

Hey guys. I installed windows 8.1 on my macbook pro (mid2012, Intel core i7, retina, Geforce 650m) of course only for game, but I have a disappointing problem with the graphics driver. First I tried to instal graphics card driver by bootcamp (not the last version, the one before the last) .It started to install drivers one by one starting with graphics card, but suddenly the screen got black and remained black forever! I restarted the windows and guess what! after windows logo it got black and nothing more! Then I installed windows again and tried to install driver from windows update. It checked for update and found the driver for it and downloaded it and started to install, but again the black screen !!! Please help me thanks.

DemetriAA wrote:
no this does not work. bootcamp drivers are broken for windows 8.1 on an efi install. apple is withholding the discreet gpu drivers from microsoft to trick people into thinking osx is more stable/efficient and thus windows cannot detect which gpu it is supposed to use when it can see both. the discreet gpu is hidden in the fake bios setup that bootcamp wants you to install with. the problem with doing this is that the more powerful gpu is all you can use in windows so the computer runs more hot and is louder which is annoying and hard on the battery life.
thanks apple, if i knew that when i bought the laptop i would have gone with something else.
This is not correct. If you force an EFI installation on a preUEFI Mac, you will see GPU and Audio errors. A non-EFI Hybrid MBR installation works correctly. Does Windows have the ability to switch GPUs? OS X, using external monitors, uses the non-Intel discreet GPU and the machine does not run hot. If Windows can provide dual-GPU support (which they have) and also provide GPU-switching (missing), this can be done. Can it be done for older hardware, highly unlikely. MacRumors has threads with PCI Register changes to expose the Intel GPU and the machine still runs hotter.
From Bootcamp Info.plist...
       <key>PreUEFIModels</key>
        <array>
                <string>MacBook7</string>
                <string>MacBookAir5</string>
                <string>MacBookPro10</string>
                <string>MacPro5</string>
                <string>Macmini6</string>
                <string>iMac13</string>
        </array>
You can verify your Model Identifier from How to identify MacBook Pro models - Apple Support. The 2012 MBPs are 9,x models.

External Hard drive partitioning for Windows

Hi I have a MacBook Pro and I am trying to download Windows via a Seagate 1 TB external Hard Drive. I have already used this external hard drive for backups and have it partitioned as an MSDOS with 500 GB and OSEJ also with 500 GB. When I use Boot Camp Assistant to install Windows 8 it says I need a single drive as FAT partition. How do I keep the memory on my OSEJ while still installing Windows 8. Thank you!
John

I don't know what OSEF is, but as far as Boot Camp is concerned only two partitions may exist - the original OS X partition and the Windows partition made by Boot Camp.
I don't know what you are downloading to the external drive. If it is the Windows drivers for Windows on Boot Camp then those you can put on an external drive. But the driver disk can only be used after Windows has been installed and running.

PnP Driver, NVIDIA, for Windows 8

In need of some serious assistance. I did a clean install of Windows 8 Professional on an HP Compaq Presario CQ60-215DX. Everything went smoothly except there was one driver that didn't download with it labeled "Coprocessor". Despite the
driver being missing the device runs it superbly HOWEVER I keep getting 2 Important updates; Update for Windows 8 (KB2770917) and Update for Windows 8 (KB2779768). They download with no problem but after the installation process things
turn red and say their are Errors found, code 800073718, as well as giving a link to "Get help with this error"
When I click this link it takes me to the link "Troubleshoot problems with installing updates," and from there "Tap or click to open the Windows Update troubleshooter." After running this it gives two possible errors and states them fixed. I go back
to install updates and hit try again and it says I no longer need the updates but when I check for new updates there are the same two all over again.
If I try to update the driver from the device properties it says it can not find one. The Action Center, however, says it has a solution to my problem and links me to NVIDIA's web site after telling me the problem is:
Description
Windows detected a new device attached to your computer, but could not find the driver software it needs to make the device usable. Each device manufacturer typically includes driver software of a CD that comes with the device, or as a download from its website.
The hardware ID of your device is PCI\VEN_10DE&DEV_0753&SUBSYS_360A103C&REV_A2.
Problem signature
Problem Event Name: PnPDriverNotFound
Architecture: x86
Hardware Id: PCI\VEN_10DE&DEV_0753&SUBSYS_360A103C&REV_A2
OS Version: 6.2.9200.2.0.0.256.48
Locale ID: 1033
Extra information about the problem
Bucket ID: 9703ab1535101f90f74cebd9d44e234e (1705665006)
So I, of course, go there in attempt to get the driver I need for the chipset. I download to install what I discover is for Windows 7, 15.56-nforce-winvista-win7-32bit-international-whql.exe. Of course
this is not compatible.
That is why I am now here. Can anyone help me figure this out please.

To fix the Windows Update issue, I suggest you try the 'Fix it' first.
http://support.microsoft.com/mats/windows_update/en
I noticed that HP does not release Windows 8 compatible drivers for your computer. I suspect that the computer is not compatible with Windows 8. I suggest you contact HP support for more information.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Photosmart 7760 driver compatibility for Windows 7?

I want to migrate from Vista to Windows 7, with a Photosmart 7760 as my primary printer. This model number is not listed in the HP Driver Compatibility Table for Windows 7. Does that mean there is no compatible driver, or is it included in another "family"?

Hi,
Download and run HP Printer Install Wizard from link below,
www.hp.com/go/tools
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

ForA1354477: problem with realtek sound driver download for windows 7

I recently did a clean install of windows 7 enterprise and I lost the option on the sound recording page for stereo mix. I found a driver update on the toshiba website for my machines realtek sound driver for windows 7 so I tried it and it worked (sort of). Now I have the stereo mix option set as default but I also cannot make any changes in the sound recording page (the tabs are nor functioning and my cursor spins it's little processing circle when it is over the page). I can't even close the page without using the option from the task bar and sometimes that fails so I have to use the task manager to close the page. Anyone else have this problem?

Satellite A135-S4477
These two drivers should work for your Windows 7. Although they carry the same version and date, they are different files with different sizes. Try them both.
Realtek Audio Driver for Windows 7 (32/64) (Version 6.0.1.5904 - Released 09/04/09)
Realtek Audio Driver for Windows 7 (32/64) (Version 6.0.1.5904 - Released 09/04/09)
-Jerry

HP Pavilion dv7-6010ev Amd-Driver​s for Windows 8

Similar Messages

Maybe you are looking for

HP Pavilion dv7-6010ev Amd-Drivers for Windows 8