HP Pavilion DV7-6190ED Windows 7 64-Bit Recovery not working

Hello,
I just bought a new (used as showmodel) laptop at a local store.
But I'm having a problem with the recovery now.
What happened:
When I first booted my laptop and after it started windows, I saw some flickering pixels on the screen. I did some research on that and looked at the computer, and found out that the drivers were conflicting with eachother. After that problem I tried a factory restore and removing and installing some drivers, this didn't work. After that I tried restoring with a minimalistic image (sorry if I misspelled), but when the restoring was complete it said that the restoring wasn't finished. My problem now is that it won't boot Windows anymore, but directly boots into recovery manager. I'm sure that the recovery partition exists and I don't have a recovery DVD.
I would be happy if someone is able to help me.

Hi:
From what you wrote it appears you will either have to purchase a recovery DVD set by reading the info at the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&dlc=en&lc=en
Or....make your own plain Windows 7 installation disk by following the instructions below (or do it temporarily until your recovery disks arrive).
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Paul

Similar Messages

Pavilion DV7-4087CL ATI Graphic card is not working on games! and on windows.Only Intel HD

Hello to all, i have problem on my laptop (Pavilion DV7-4087CL_. I have windows 7 64 bit , and all drivers is update and special ATI from AMD RADEON LAST one. After too many installation i cannot play 3d games or whatever game with my ati.
Also DXdiags says INTEL HD not ati amd....
What solution have with this and how im taking all the power from the laptop because is very slow with intel
Regards
Arkadios
This question was solved.
View Solution.

Hi @arkas
Welcome to the HP Forums! I see that you are having some graphic problems. Did you install that ATI driver from the AMD website? If so that is the problem. You have switchable graphics meaning that you have two video cards. The Intel card is designed for your everyday basic graphics processing while the ATI card is designed to handle the heavy lifting. Switchable graphics drivers are configured by the manufacturer of the notebook not the manufacturer of the graphics card.
I would suggest that you install your AMD High-Definition Graphics Driver and your Intel High-Definition Graphics Driver. If you are looking for more information on switchable graphics this HP document Switchable Graphics on Notebooks Configured with Intel and ATI GPUs.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

HP Pavilion dv7-1240us volume control touch sensitive not working

vista 64bit
the touch controls for the volume, wireless on/off, and mediasmart are not working. i'm getting annoyed with contacting hp over this. does anyone have a similar issue and hopefully a fix? i'm about to use this laptop for target practice with my glock and ar15
This question was solved.
View Solution.

I have a dv7-1245dx and just started having the same problem......only had it for a few days....

Why are my 2 W S X keys only working intermittently on my HP Pavilion DV7 running windows 7?

Hello,
I'm experiencing a bit of trouble with my 2 W S X keys. They only seem to work when they want to and when one stops working, the other stop working too.
The laptop in question is a HP Pavilion dv7 running windows 7 64bit. I can't think of any changes that have occured before the change but was working fine this time last week. Not dropped it or anything.
A note i saw elsewhere said to check if the keys work works in the BIOS. I opened the BIOS and tried the keys in there upon startup. Didn't work. Logged in left it for a bit and then as if by magic it was then working again (enough so to enable me to write this).
Any ideas what this could be?
Thanks in advance of any help,
Adam

This is definitely from malware - it happened to me last night and I checked online and found 2 many guesses. I managed to resolve it moments ago - and I'm typing with the same computer / keyboard. It is hard to resolve but here is the link to the virus description (which does not mention the specific symptom of losing the 2 W S X keys). I lost the function immediately, and suspected malware right away: http://www.microsoft.com/security/portal/threat/encyclopedia/entry.aspx?name=TrojanDownloader%3aJava...
So this is how I solved it: I had Microsoft Security Essentials and it was up-to-date. However, it does not find it by itself. Spybot finds something but is unable to fix it - even upon a reboot. I installed Trend free atHome(?) virus scan - it does not find it. I installed AVG full Internet Protection - it does not find it. However, while AVG was running (a few hours) Security Essential found it - just like that! So, it appears that when the malware was adjusting itself to avoid being detected, that it was discovered by MS Security Essentials. I fixed it while AVG was running, and tested my keyboard right away. At first the x worked, then the other keys.
This is malware - not hardware, so please stop telling people to clean or replace their keyboards.

HP Pavilion dv7 6b57nr windows can not continue

after system recovery with hp recovery disc windows will not load completely After setup for first use the wecome screen loads to the point of says welcome then windows can not continute comes on.
HP Pavilion dv7 6b57nr windows 7

You can get some of the original software & drivers from your Support page HERE
If the copy of Windows you have is already activated on another machine you may need to install the version that matches your license key attached to bottom of laptop.
If you can read the 25 character Microsoft Windows 7 license key attached to your laptop ,download a Windows 7 ISO file to burn to a DVD for the version that is listed on the Microsoft COA sticker.
Link to the W7 ISO file downloads:
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Get ImgBurn to burn the iso image to cd
Or use the Windows 7 USB/DVD installation tool to convert the ISO file to a Windows installation on DVD or USB flash drive.
http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool
Use the 25 character product key on the PC to activate the installation.
Next go to your support and driver page to install the drivers you need.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Hp pavilion dv7 is plugged on 220v is not charging.

hp pavilion dv7 is plugged on 220v is not charging. With or without battery, the laptop is working, The power light is working at the power plug but the indication in front ( a ligthning sign) not.

Hello apri,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
The issue you are describing appears to be a physical issue and I think it would be best if you contacted HP technical support for repair options.
US support link to contact options for HP products purchased in the US.
Outside of US support link to contact options for HP products purchased outside the US.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Bluetooth Driver In Windows 8.1 is Not Working [Model Pavilion 15 E007TU]

Sir Where is Th Bluetooth Driver for Windows 8.1 for the Laptop of Model Pavilion g6 pavilion 1318ax
In Windows 8.1 Bluetooth Not Working

Hi @iamvinod34 ,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion g6-1318ax Notebook and needing help with Bluetooth. Here is a link to fixing Bluetooth issues.
If that does not help try looking at the section in this document Labeled: Make sure that wireless communication is turned on. Sometimes just turning on and off the Bluetooth helps.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system. If an updated is needed this could cause this issue.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)

Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
what cAN i do to make it work?please help

Hi:
If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

Lightroom 5.6 would not open. I only get a flash picture then I get an error message. See below message: [Window Title] Adobe Photoshop Lightroom 64-bit [Main Instruction] Adobe Photoshop Lightroom 64-bit does not work more [Content] there was a problem m

Lightroom 5.6 would not open. I only get a flash picture then I get an error message. See below message: [Window Title] Adobe Photoshop Lightroom 64-bit [Main Instruction] Adobe Photoshop Lightroom 64-bit does not work more [Content] there was a problem making the program no longer work properly. The program is closed and there is a notification if a solution is available.

I may have just solved my own problem. Right after posting this I googled bezel lightroom and found this: Flickr: Discussing The word 'bezel' appears in the taskbar. in Adobe Lightroom
I changed the setting in the view menu and now everything appears to be working fine. I cannot explain why it stopped working before because I hadn't made any previous changes to the view options.
Still am curious about the memory usage, though.

My lap top name is hp pavilion dv 600. and my micriophon is not working . i am using windows 7.

My lap top name is hp pavilion dv 600. and my micriophon is not working . i am using windows 7. before that i was using widows vista. in the cotorl panel in the hardware and sound section . in the sound section in the recording tab it is written that microphone is not plugged in while i have microphone in front of my screen . could any one help me.?????

Try to disable transparency in Windows, see:
*[[/questions/804050]]
Right click in a free space on your desktop. 
Left click on Personalization. 
There are four options at the bottom of the screen, choose "Window Color and Appearance". 
Select a border color 
Uncheck: "Enable transparency" 
Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

HT4796 I am having trouble completing the the migration assistant process. My PC (Vista windows, 64 bit), will not go to the step where I enter a passcode from my MAC. Any suggestions?

I am having trouble completing the the migration assistant process. My PC (Vista windows, 64 bit), will not go to the step where I enter a passcode from my MAC. Any suggestions?

Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.

Why can I not import pictures any more? Lightroom says "Your Lightroom 5 64-bit does not work correctly"

Why can I not import pictures any more?
Lightroom says "Your Lightroom 5 64-bit does not work correctly"
Technical informations:
PC with Windows 7 64-bit, Lightroom 5.7.1 64-bit installed.
What I have done:
I downloaded the newest LR 5.71 and installed it again - mode repair; without success
I checked my PC with Norton 360: full scanning and optimizing registry
I restarted the PC and than I installed the LR 5.7 again - repair
Trouble 1:
Two days ago I could work with my LR 5 and to import pictures from a SD was no problem. Now I can start LR 5 and I can watch/modify pictures, but as soon as I try to import new pictures LR 5 stops and gives the message "your LR 5 64-bit does not work correctly - searching for solution". I have not changed anything in my computer since lasttime LR 5 worked properly, only the registry was optimized by Norton 360.
Trouble 2:
I live in Switzerland and my language ist German. I dit not find a place where I can present my problem in German, e.g. a phone number oder email-address oder german-chat. My English is to week for a discussion for computer problems and do understand it.
Help:
I would very appreciate if anybody can help me, either to trouble 1 or to trouble 2. Thanks.

Sehen Sie diesen Beitrag:
Photoshop CS4 & Lightroom 2.6 X64 funktionieren nicht mehr
Wacom Tablet-Treiber-Problem?

Command R Recovery Not Working

Dear All, I'm a little stuck. There's something wrong with my OSX (Mavericks 10.9.5) that is stopping me from booting in the regular way ( I get stuck @ the grey screen), Booting and using Command R does nothing (tried many times for long periods), thankfully booting and holding just Option manages to get me in (via selecting my hard drive etc) and thus i've now been able to back everything up... good... So now i run Disc Utility / Verify and am told i have disc problems and i need to reboot / command R to get to the recovery centre... hmmmm nope as the command r step is the bit thats not working.... What please do i do ?? I read about internet recovery but that seems to be triggered from within command r... I really don't want to simply reformat my hard drive and "see what happens" when i then reboot as hoping i get redirected to internet recovery seems like a crazy option.... Any guidance please ???... Basically how do i get to the recovery area without rebooting using Command R ?

Genius !... Thank you Barney... Booted via the web, tried to repair, couldn't but let me erase my hard disc and reinstall a fresh version of OSX.... 8 minutes to go on the download then it will need a thorough update but looking good right now !... a painful day but many thanks !

Vista PDF Preview handler installed on Win 7 32 bit does not work.

There is no discoverable information regarding failure to preview Adobe PDF files on Win 7 32 bit. The advice for 64 bit does not work. Adobe continues to install the Vista preview handler on my Windows 7 computer, which I suspect is the issue. Is there any way to find and install the Windows 7 32 bit handler or is there a registry hack that permits 11 to access the vista version or what? This is a repeat post, as I cannot locate the first and assume that there have been no responses, as I have received no alerts.
If you have an answer I will name my first born for you. He is 41 and object loudly, but no price to great.....

I have fifteen minutes to mark this as a question, despite the fact that no question link or icon exists. Adobe?

Sharepoint 2010 windows authendication(NTLM) is not working properly in IPad safari browser

Hi Apple Team,
Sharepoint 2010 windows authendication(NTLM) is not working properly in IPad safari browser. When I enter the user name and password the page is keep on loading it never completes the page load. I installed chrome browser on my Ipad and opened my sharepoint windows authentication site it is working fine.
Device : IPad 2
OS : IOS 7.0.6
Thanks,
Baskar

Hi Suhasini,
Please refer below links for your issues. It seems you are having problem with 32 bit and 64 bit component in office and IE.
http://howididit-sharepoint.blogspot.in/2012/04/datasheet-view-not-working.html
http://alpesh.nakars.com/blog/datasheet-view-does-not-work-in-sharepoint-2010/http://support.microsoft.com/kb/2266203
Thanks and Regards, Shailesh B. Davara

HP Pavilion DV7-6190ED Windows 7 64-Bit Recovery not working

Similar Messages

Maybe you are looking for