HP Pavilion dv7-6b76eo SSD upgrade

Hi
I have the HP Pavilion dv7-6b76eo and I made a post here:
http://h30434.www3.hp.com/t5/Notebook-Hardware/HP-Pavilion-dv7-6b76eo-upgrade-HDD-SDD/td-p/3913164
but since no one replies I had to make a new post.
I have 2 slots on my motherboard, currently only the 1 being used of my HDD, which is slow and sux! I want to slot in an SSD next to my HDD and have my operating systems on the SSD and the HDD as storage... pretty straightforward, eh? It is!
Just wanna know now if it matter about the SSD's producer. The Service manual PDF from HP for my PC (found here - http://h10032.www1.hp.com/ctg/Manual/c03043778.pdf ) tells me only that my pc supports the HP 160 GB (665985-001) solid-state drive found here - http://partsurfer.hp.com/Search.aspx?SearchText=665985-001 and it does not look too promising, in my opinion.
What if I want something else? How do I know if it will be compatible or not? Are they all compatible? Would you recommend me any producer. Anything to stay away from or any specific producer of SSD that I should use for upgrading my HP Pavilion dv7-6b76eo?
PS
On my HP Pavilion dv7-6b76eo the processor and chipset are from Intel, not AMD, in case that is important to be mention in this context.

Hi,
My suggestion:
Clone existing HDD to new SSD (try Samsung, Crucial ...) then install new SSD on the primary slot, this will save a lot of hassles.
Format the old HDD, buy caddy & cable then install it on the second slot.
1. There are many clone software around, you can buy one or try the following free:
  http://www.techrepublic.com/blog/five-apps/five-free-and-reliable-cloning-tools/
  http://www.techsupportalert.com/best-free-drive-cloning-software.htm
  Some SSD vendors supply conling software for you too, normally you have to pay $10 to $15 more.
2. Caddy and cable:
   http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=379
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • HP Pavilion dv7-6b76eo GPU drivers don't work on Win8.1 and ones for Win7 are older than my grandma

    I got
    HP Pavilion dv7-6b76eo
    i7-2670QM 2.2 GHz
    8GB DDR3 1333Mhz
    1TB SATA 5400RPM
    AMD Radeon HD 6770M - 2 GB GDDR5 out of ~6GB dedicated
    Installed the latest version of Win 8.1 + all it's updates + the update 1. So it's as latest as possible. Even installed those Win Updates that MS threatened they will only offer to a certain point it time in May and not later than that. So it's all updated.
    However, the GPU drivers don't work. Tried different forums too and even tried those brightness registry fix files, but still to no avail. Will HP ever provide a meaningful GPU driver both for Win7 and Win8? I am saying Win7 too, cos the one offered currently for my HP Pavilion dv7-6b76eo is ridiculously old ....

    HP are quiet .. they know they've been lazy ...

  • HP Pavilion dv7 - 2012TX Hardware Upgrade

    Product: HP Pavilion dv7
    Model #: dv7 - 2012TX
    p/n: NW975PA#ABG
    OS: Windows 7 Ultimate 32 bit
    This product has never been tampered with and is totally stock apart from installing windows 7 onto it. It is fairly old now and id like to upgrade it if possible.
    It currently has the following Processor,
    Intel (R) Core (TM) 2 Duo CPU     P8600    @ 2.40GHz   2.40GHz
    It currently has the following Installed Memory (RAM),
    4096MB       4.00GB (3.00GB usable)
    My question is, is it possible to upgrade my processor to the,
    Intel Core™2 Duo T9600 2.80-GHz with
    6-MB L2 cache and 1066-MHz front side
    bus (FSB) ?
    Id also like to know if it is possible to upgrade my RAM and if so what is the maximum size?
    According to the hardware specifications the maximum memory is 8192 MB. Not sure what that means exactly.
    If all this is possible, id like to install a 64bit version of the latest Windows onto it.
    Would that make it run better?
    Thanks 

    As you might expect we get a lot of these questions and the first thing you are going to want to have is the Service Manual:
    Manual
    You have the ATI Radeon HD 4530 graphics. I believe you are limited to dual core processors, not Quad Core and the fastest you can install is a 
    Intel Core2 Duo T9800 2.93-GHz with 6-MB L2 cache and 1066-MHz FSB 507951-001
    The T9600 is not listed. I know the T9800 is about $75 on eBay so not too bad.
    http://www.ebay.com/itm/Intel-Core-2-Duo-Mobile-T9800-SLGES-2-93GHz-6M-1066MHz-Socket-P-Dual-Core-CP...
    Your maximum memory is 8 gigs; that is 2 x 4 gig modules. Unfortunately you are using the older DDR2 memory and it is quite a bit more expensive than the current DDR3 variety. 8 gigs of DDR2-800 laptop RAM is going to set you back over $200:
    http://www.crucial.com/store/partspecs.aspx?IMODULE=CT2KIT51264AC800
    I don't know if you are going to do the processor upgrade yourself but with your own labor you would be looking at almost $300 and if you have to pay a tech to install the CPU think in terms of $450 total.
    Your license for Windows 7 Ultimate 32 bit would include a right to run Windows 7 64 bit from the same Key Code and I think you should just reinstall a 64 bit version. As things are, you are not fully taking advantage of 4 gigs of RAM so upgrading to 8 gigs would be useless unless you also go to 64 bit Windows. This will require a complete wipe and reload, not an upgrade install. I would advise against Windows 8 on that machine. If you decide to go there figure another $60 for a copy of Windows 8 64 bit, at least.
    Let me offer another suggestion. Your laptop has space for 2 hard drives. Move your original 5400 rpm 500 gig drive to the seconday slot and purchase a 240 or 256 gig SSD for something like $150, or even a 128 gig for around $90. You could even forget the upgrade to 8 gigs RAM. 4 gigs is plenty, but I would upgrade to 64 bit Windows to unlock all of the 4 gigs. 
    Using an SSD as the main boot drive will make you think you have added 1 ghz + to the processor speed. 
    You will need a second hard drive caddy and cable here:
    http://www.newmodeus.com/shop/index.php?main_page=product_info&cPath=2_5&products_id=222
    Here is a good deal on an SSD:
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820148694
    Here is a download link for a fully legitimate copy of Windows 7 Ultimate 64 bit with SP1 included:
    http://msft.digitalrivercontent.net/win/X17-59465.iso
    Your Key Code used for the 32 bit install will activate this. 
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • How to know which hard drive contains the OS in Hp Pavilion dv7-4069wm? Upgrading.

    I'm thinking about upgrading one of my hard drives (320GB ea) in my HP Pavilion dv7-4069wm laptop for more storage.  I would like to keep the drive that contains the OS to avoid the hassle of making a copy, but I'm not sure which one that is. I haven't replaced a hard drive before, let alone a dual drive. I recently added more RAM and noticed both hard drives looked the same. Can anyone tell me how to know the difference? . 
    This question was solved.
    View Solution.

    Hi,
    The primary HDD with the operating system is shown on the diagram on Page 49 of your Maintenance & Service Guide.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP Pavilion dv7 2215sa memory upgrade to 8gb becomes unstable

    I have a HP DV7 2215sa laptop running Windows 7 Home Premium 64bit ed and it has 4GB of Ram.
    I wanted to upgrade the mem to 8GB to bought two 4GB mem from Crucial and experienced the following problems:
    1. Turned on the laptop after the upgrade and got 'Windows is loading file' message. After that, windows didn't load and saw the HP logo again (as you would do when you start the machine up). Then was presented with two options..... start windows normally or load windows repair (something like that, I can't remeber the exact message). With Either option selected, the machine just goes into the same bootup loop and you then presented with the same two options.
    >>>>> Did a system check on the machine, i.e. checked memory and hardisk and they passed successfully. (System check being the option you go to when see the HP logo and press F2 i think....??)
    2. Machine boots up after system check and......windows starts to load up, but crashes when I get to login prompt.
    3. Restart machine again, Windows doesn't load and I get those previous two options again.....selsct load windows normally and....windows loads up! I manage to log in! I casn browse the web, load applications...and its quite fast but notice something strange. The screen flashes (just the once) and my wireless connection dies for about 5 minutes, i.e. get crossed symbol in the wirless icon as if to say its been disbaled when its not. The blue light is still on for wirless though on the laptop.
    4. Wireless recovers. Run Go on to firefox, try to update it.....the update fails. Load itunes, it requires an update.....when it tries to download the update from apple, it gets a download rate that reminiscent of dialup...Kill, the download and acquire the latest file from Apple. Windows then tells me that the download in unverified and that it cant be trusted. **bleep**? Try this a number of times and then eventually it manages to accept the file somehow. But the drama doesn't end there, th install cycles about 5/6 times and then it eventually installs the application. (It was the 64bit version, 32bit couldn't be installed as advised by apple).
    5. Rebooted the machine about three times and managed to log in all three times but still seemed unstable (i.e. firefox still didn't update).
    6. Next day, started the machine.....BLUE SCREEN OF DEATH.....something about memory management. didn't get the error message recorded but knew it was to do with memory.
    I've got my laptop working again by re-installing my old memory.
    The modules that I bought were....... DDR310600 1.5V 4GB (x2)
    My current modules are Samsung PC3-10600 2GB
    I didn't try installing one module at a time to see which one was faulty because I was annoyed and just returned the memory back.
    Has anyone had a similar experience with the same if not similar laptop? And if so, how did you manage to upgrade your laptop to 8GB?
    Thanks,
    Dav

    I had the same issue with my dv7 2278 and was not able to fix my problem.
    i tried 2 differenst memory manufactured, and each of them did not work.
    My opinion HP portable is a piece of scr......

  • Pavilion dv7-4069wm Fingerprint upgrade

    I used the digital persona fingerprint reader upgrade from HP, and now I can't get into my computer.  I've used the fingerprint lock ever since I got the computer, but now it turns on and I need to either log in ("Log in not accepted") or scan my fingerprint ("Fingerprint not verified") to go any further.  I tried to go to tech support, but my warranty expired less than a week ago, and I can't seem to find any help that doesn't cost a lot.  There doesn't seem to be anybody at HP willing to hear that my computer was working just fine until I used the upgrade they sent me.  Any ideas? 

    Kindly go through below links where various members have posted solutions
    http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/Windows-Security-The-stub-received-bad-d...
    http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/Windows-7-Pavilion-dv6-Laptop-Log-in-Err...
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • Dv7-6b78us ssd upgrade

    I'm trying to determine if my new dv7-6b78us is a SATA-II or SATA-III, anyone know?

    KLFair194 wrote:
    I'm trying to determine if my new dv7-6b78us is a SATA-II or SATA-III, anyone know?
    Hi,
    The chipset supports SATA III but I have seen some posts that SATA III SSDs worked at SATA II speeds..
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • I would like to add a ssd to my pavilion DV7-3090ED

    Hallo,
    I own a pavilion DV7-3090ED, and I'm looking to add a ssd,but i do not know if my pc has Sata I or Sata II.
    Does anyone knows how can i find out?
    Thanks!
    This question was solved.
    View Solution.

    Yes. Your notebook does use a SATA hard disk, so you can upgrade it to an SSD disk.  
    reference source. Pavilion dv7 Maintenence & service Guide
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Hp pavilion dv7-6157cl upgrade questions

     I currently own an hp pavilion dv7-6157cl  and want to upgrade my memory to 8gb and the HD to at least 1 TB. I figure I will do it when I tear my laptop appart to replace the cooling fan ( strange though - I have a Compaq (which is supposedly a lower end  of the HP line but it is over 3 years older  and the fan is still going strong and an even a much older and  lower end Gateway with no fan problems - go figure!). I upgraded my Compaq wireless card from a G to an N and learned that HP/Compaq had white lists for certain parts that would only allow certain manufactures parts to be used. Is this true also for memory and hard drives?
      As far as the memory goes - what are the specs (I know they are DDR3) but what is the speed specs of the memory used. Being that it is 6 GB I presume there is a 4 and 2 GB  stick installed but I have  also gone by the standard that it is faster to  have both memory sticks the same capacity and speed. I also presume the extra memory would improve graphics also as the graphics share the sytem memory.
     I also am going to be replacing the 640 GB  HD with at least  a 1 TB drive - is there a good program to clone the internal drive to use a bigger one as a direct replacement without having to reinstall everything. The cloning process would be simplified as currently buying 2.5 inch external USB 3.0 drives is cheaper than buying barebones drives (a 2.5" 1 TB  Seagate drive can . I presume if I got a 2 TB external I would have to partition it into 2 1 TB partions but the way the 2 TB  2.5" external drives it would be worth the cost.
     Finally -  besides  the above questions are there certain makes for memory and HD's that are in the "whitelist" that can only be used. Any and all info would be appreciated.
    This question was solved.
    View Solution.

    Hi,
    You've got many questions, please allow me to make some suggestions (not in order):
    1. 1TB is the sweet point now in term of price/performance and no need to muck around due to some limitations. Many HSSD's (Hybrid SSD) now are very good. HP uses few suppliers and many laptops use Toshiba HDD's, you may want to play safe by using this brand.
    2. For memory: your machine support 8Gb max as mentioned in its specs. From 6Gb to 8Gb you can't see or feel the difference but if you wish, keep the existing 4Gb and buy a SAME specs/brand 4Gb stick to replace the 2Gb stick. The video card on your machine can take "Up to 3061MB" max this will give you plenty of RAM.
    3. Cloning existing HDD to new HDD is the best approach if you won't need to change anything (by the way, I use this many times to swap my HDD's around my test machines). Some vendors supply tool for you (or you can download from their sites) to clone. There are few good cloning software around:
      http://www.techrepublic.com/blog/five-apps/five-fr​ee-and-reliable-cloning-tools/
      http://www.techsupportalert.com/best-free-drive-cl​oning-software.htm
    All the best in 2014 and good luck for the upgrade.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Is it possible to upgrade/add a graphics card to a Pavilion dv7-7000 laptop?

    I've been doing a lot of research lately, to mostly no avail, about whether or not my HP Pavilion dv7-7025dx laptop can have a dedicated GPU added to it, as currently it only has the integrated Intel HD 4000 Mobile graphics card.
    Mostly I've come across the unfortunate agreement that most laptops cannot have their graphics cards upgraded/swapped out, since the graphics card is soldered on to the motherboard. However, after talking to an HP "support representative", they said they believed it was possible to add a graphics card, as long as it is compatible with the HM77 45W UMA Motherboard my computer has.
    Furthermore, after finding the maitenence and service manual online for my computer ( http://h10032.www1.hp.com/ctg/Manual/c03221579.pdf ) it says that it could have come with switchable graphics, specifically the Nvidia Geforce 630M or 650M. 
    So I am wondering, is it really at all possible to add a dedicated graphics card, either by having switchable graphics or something else? Or am I stuck with the integrated Intel HD graphics? 
    If I can upgrade/add a new card, where would I be able to find/buy a compatible one, and would I be able to install it myself or would I need to go to a local computer repair?
    My laptop is the HP Pavilion dv7-7025dx Entertainment Notebook.
    It has an Intel Core i7- 3610QM CPU @ 2.30 GHz, 8GB memory, 750GB hard drive (5400 rpm).
    I am currently running Windows 7 Home Premium SP1 (64-bit).
    Any other specifications can be found here:
     http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lang=en&lc=en&product=5263030
    This question was solved.
    View Solution.

    YoureInMySpot wrote:
    I've been doing a lot of research lately, to mostly no avail, about whether or not my HP Pavilion dv7-7025dx laptop can have a dedicated GPU added to it, as currently it only has the integrated Intel HD 4000 Mobile graphics card.
    Mostly I've come across the unfortunate agreement that most laptops cannot have their graphics cards upgraded/swapped out, since the graphics card is soldered on to the motherboard. However, after talking to an HP "support representative", they said they believed it was possible to add a graphics card, as long as it is compatible with the HM77 45W UMA Motherboard my computer has.
    Furthermore, after finding the maitenence and service manual online for my computer ( http://h10032.www1.hp.com/ctg/Manual/c03221579.pdf ) it says that it could have come with switchable graphics, specifically the Nvidia Geforce 630M or 650M. 
    So I am wondering, is it really at all possible to add a dedicated graphics card, either by having switchable graphics or something else? Or am I stuck with the integrated Intel HD graphics? 
    If I can upgrade/add a new card, where would I be able to find/buy a compatible one, and would I be able to install it myself or would I need to go to a local computer repair?
    My laptop is the HP Pavilion dv7-7025dx Entertainment Notebook.
    It has an Intel Core i7- 3610QM CPU @ 2.30 GHz, 8GB memory, 750GB hard drive (5400 rpm).
    I am currently running Windows 7 Home Premium SP1 (64-bit).
    Any other specifications can be found here:
     http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lang=en&lc=en&product=5263030
    Hi,
    You can't add a dedicated graphics card to the system like this. The vga is soldered to the board so no way you can just plug it in like on a desktop. However, you can buy a new motherboard with the dedicated graphics card on it. It also requires a new heat sink. 
    Manual: http://h10032.www1.hp.com/ctg/Manual/c03221579.pdf
    You need a 682040-001 board plus 682061-001 heat sink to have a dedicated graphics card on your laptop. Have a look on ebay for the part numbers. 
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • Can I upgrade my processor in my pavilion dv7 4179nr laptop?

    Can I upgrade my processor in my pavilion dv7 4179nr laptop from a 1.70 GHz to a 2.0+ GHz processor & if so, what kind & how much do they usually run?  I am running Windows 7 Home Premium 64 bit.

    Hi:
    Below is the link to the service manual for your notebook.
    http://h10032.www1.hp.com/ctg/Manual/c02642701.pdf
    Supported processors can be found in chapter 1, pages 1 & 2.
    Part numbers for processors can be found in chapter 3.
    Enter the part number in the box at the link below and you can see what HP charges for them.
    http://h20141.www2.hp.com/Hpparts/CountryChoice.aspx
    I would look on eBay and see what is for sale there.
    Paul

  • I would like to add a ssd to my pavilion dv7

    Hey
    I own a pavilion dv7 4050eb, and I'm looking to add a ssd.
    There are 2 compartments to place a hard drive in my notebook, one is currently used and the second one is empty.
    So I thought there wouldn't be a problem.
    But when I went to my local specialized computer store (where I bought this notebook), they told me I won't work if the bracket and connection cable for a second hard drive weren't included with my notebook (which is te case) because they can't get those from HP, no matter how hard they try.
    Is there realy no way HP can supply these simple parts (bracket and cable)?
    And if I could get those, would there be any problems whith installing a ssd in this specific notebook?
    Thanks in advance.
    This question was solved.
    View Solution.

    Hi,
    Yes you can add a second HDD or a SSD to the second slot/bay on your machine. You need a caddy cable to go with it. Please watch these videos:
      http://www.youtube.com/watch?v=5kZ4irwlyEY
      http://www.youtube.com/watch?v=EZgiX-pzdL8
    (and many more)
    And the caddy is something like this:
       http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=345
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Windows 8 HP Pavilion dv7-4285dx Upgrade results in black screen after intallation finalizes.

    I have a 2011 HP Pavilion dv7-4285dx with Windows 7 64 bit Home premium installed.  The notebook/laptop has a AMD Radeon HD 6300M series display adapter with driver version 9.2.2.0 dated 9/27/2012 and an ATI technologies Intel HD Graphics display adapter with driver version 8.7771.1.0.  The notebook/laptop has not had a hardware upgrade and contiains the orignal factory OS. BIOS is current to latest available.
    The issue I had while upgrading to Windows 8 is after the install finalizes (settings and preferences are entered) and the system boots to the tiles screen, the display works fine.  Clicking to the desktop works only for a few moments before the screen goes dark. Pressing the power button and/or closing/opening the lid results in at times a black screen (no power to the screen) or black screen (power to the screen) or a black screen where only the mouse pointer is visible and moves around the screen.  Restarting the computer results in a repeat of the issue at times while other times it will boot directly to what appears to be the windows desktop. You can interact with the file folder icon on the task bar as well as internet explorer, and you can get the charms bar and tile screen. Any attempt to open computer management or any control panel or task manager will open the window as an icon on the task bar.  You can mouseover the icon to "preview" a small version of the window but you can not click on it to maximize.
    I attempted the following workarounds:
    1) Clean install of Windows 8: Installs but fails with same result as above
    Refresh PC from windows 8 rescue media: Works slightly longer until AMD driver fails and then reverts to situation above. 
    2) Uninstalling all display adapters (via computer management) and then upgrading to Windows 8: Results in microsoft drivers getting installed, works much as refresh above until AMD driver fails and then reverts to above situation.
    3) In Scenarios 1 and 2,  I also tried to use windows update within Win8 to update the drivers there are updated MS drivers available ,(dated as late as 10/27/2012) but intalling those drivers also resulted in a failure of the adapter within a short period of time as did NOT updating the drivers.
    4) Disabling display adapters and then restarting:  Results in a BSOD (Blue Screen) IRQL_NOT_LESS_OR_EQUAL Stop: 0x0000000A error during boot as the OS runs into trouble with the driver before Windows 7 boots.  This happens if one or both drivers are disabled.
    5) Disabling display adapters before in-place upgrade to Windows 8 results in the Windows 8 equivalent of a BSOD and results in the system shutting down and then reverting to Windows 7.
    Through research, I determined some ppl had luck connecting another monitor/HD TV through VGA/HDMI and then using the function-screen button to switch, with my system this resulted in the same issue displayed on the TV/Monitor. There are also updates to ATI and Catalyst center available including drivers and installing these do not remedy the issue. Intel was checked and there are no drivers available as HP uses a "custom" driver for intel.  Attempting to install any of these Intel drivers will result in a fail with a compatiblity error.
    Windows 8 has no safe mode ability from the windows 8 rescue media disk, you cannot F-8 as you could in the preview. Safe mode must be reached via charms, settings, startup and then selecting safe mode as a boot option, which is not available as the display adapter malfunctions.  In those scenarios where I was able to get a windows desktop to boot up as in the first paragaph I can get to the restart settings via charms, but clicking to bring up the restart menu requires another window to open which is only visible as a "preview" on the windows task bar.
    if you are going to attempt to try any of these,
    1) Use a third party software to image your pre-win 8 upgrade system that you can boot into from USB or CD;
    2) Before starting the process, disable the UAC prompt and remove any passwords from logon, as those things will require you to interact with the OS and you will not be able to do this when the adapters fail.  The screen will shadow out as it usually does but the prompt will not be viewable.
    3) Create an ISO image of the Win8 install media and write down the product key. If you are able to get a successful boot, before the drivers fail, create a Windows 8 rescue media disk.
    I spoke with HP tech support this morning (10/29/2012) they are aware of the issues and they lie with the display adapters.  They are working toward a solutuion but there are none available at this time and no date when they will be available.  They recommend checking the support website and having the web page autoscan your PC as the drivers will show there when they are posted and they will be installable from Windows 7 so there will be no issue with upgrading to Windows 8.  Bottom line, do not upgrade to Windows 8 at this time.
    MS Tech support escalation tier reps also informed me there is no present workaround available.
    Hope this helps and saves somebody some time!
    JJ

     My laptop sat at BestBuy from Friday night until today (10-31-12)! They couldn't figure out how to fix the problem so I finally told them to revert my latop back to Windows 7! I hope HP reads these and will hurry up and make the updates needed so that I can run Windows 8 on my Laptop! I just bought mine in July of last year there is nothing wrong with it and after dropping about $1200.00 for my dv7-4285dx along with the Best Buy Geek Squad package I do not feel like having to drop more money into another laptop!! PLEASE HURRY AND FIX THIS I DIDN"T DROP $69.99 plus tx to not be able to use Windows 8! Even before I did the upgrade I had the GEEk Squad check to make sure I could make the upgrade and was told this laptop well surpasses the required minium to run Windows 8!!!!!!

  • Can i Upgrading the cpu in a HP Pavilion dv7 1285dx

    can i Upgrading the cpu in a HP Pavilion dv7 1285dx I have Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz
    This question was solved.
    View Solution.

    Hi:
    Below is the link to the service manual for your notebook.
    http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01918142/c01918142.pdf
    See Chapter 1, page 1 for the list of supported Intel processors.
    Paul

  • HP Pavilion dv7-6c95dx upgrade graphic /AMD & NVIDIA/

    HP Pavilion dv7-6c95dx upgrade graphic /AMD & NVIDIA/ 
    HP Pavilion dv7-6c95dx windows 8.1 support 
    Windows 8.1 fingerprint error 

    Hi s0ulLesS
    Here's the product specs: http://h10025.www1.hp.com/ewfrf/wc/document?cc=uk&lc=en&docname=c03220956
    Here is the link to service manual of your product: http://h10032.www1.hp.com/ctg/Manual/c03099448.pdf
    You can go through Page 4 Chapter 1 of service manual. As far as your graphics chip is concerned, your current Intel HD 3000 GPU is integrated into your Motherboard and as such, is not an upgradeable component.
    Although Models similar to yours come with a 'Dedicated Graphics Card', the 'Card' is still soldered to the Motherboard and can't be changed.
    Hope this resolves your concern.
    thanks,
    ***CLICK 'ACCEPT AS SOLUTION' TO HELP OTHERS WITH THE SAME PROBLEM ***
    ***CLICK KUDOS IF YOU APPRECIATE MY REPLY***
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

Maybe you are looking for

  • How to create a new user in IDM 8.1 with random generated password?

    Hi, i want create a new user using a modified tabbed user fom that cannot ask for password and confirm password to the administrator but randomly generate a new password (only when the form is opened in user creation) according to password policy and

  • Can I purchase and use iTunes gift certificates in my country?

    Someone told me that there is a loophole in the iTunes Store ... People living in countries where iTunes Store is not available (i.e. the entire Asia except Japan) can go on line to purchase Gift Certificates and then purchase music on iTunes Store.

  • Custom code as an exception handler not working.

    Hi, I worked on Custom Handler for unauthorized access to a taskflow following the link below and it worked. But a special case in this doesn't work. http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/taskflows_complex.htm#ADFFD22602 Scenar

  • Issue with EAN/UPC field in "BAPI_MATERIAL_SAVEDATA"

    Hello guys, I have a requirement where I am using the BAPI_MATERIAL_SAVEDATA to create a new material by using a reference material. The question is how can i pass EAN/UPC field into it? This field exists in Basic Data1 tab in MM01 screens. I am not

  • Problem using Time Machine with Seagate BackUp Plus Pls HELP!!

    I have a late 2006 iMac (running OS 10.5.8) & am trying to back up using Time Machine with a new Seagate BackUp Plus drive. When I select the Seagate drive in Time Machine it tells me I msut first erase the (Seagate) disk. When I hit ERASE, I get a T