HP Pavilion dv7 Microphone delay, Windows 7 64-bit

I bought this notebook HP Pavilion dv7 a few weeks ago, so I tried recording with the external microphone and there is a very annoying delay which doesn't allow me to record audio properly. I haven't changed anything, it just doesn't work. How can I fix this?

Hi,
Please use the following instructions to check and fix:
   http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us​...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • No audio on hp Pavilion dv7-6157 cl notebook, Window7 64 bit

    HP Pavilion dv7-6157 cl, Windows 7 64 bit.
    The only sound is a sound at startup.  After running several fixit suggestions I now receive a notice from:
    " HP Connection Manager.exe  Cannot load assembly  
    CaslShared, Version=3.5.1.1, Culture=neutral,
    PublicKeyToken=9c6f83d5b7f3d097  
    The application will now exit.  "
    When the audio wentout I also lost use of Microsoft Office Starter. I have gone to Sound and everything says it is working and installed.  But when test, nothing.   I've fought this for over a month now, and really miss audio, someone please help.

    Hi
    Please find the link given below might help you to fix your issue.
    Resolving No Sound or Audio Problems in Windows 7
    Tips for fixing common sound problems Microsoft
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Touch pad light doesn't respond to fn spacebar on Pavilion dv7-7012nr with Windows 7 Home premium 64

    Touch pad light doesn't respond to fn spacebar on Pavilion dv7-7012nr with Windows 7 Home premium 64.  Bought it new from HP.com in October and it has never worked.

    Hi,
    I belive that action OR f5 is for the backlit keyboard, not the touchpad. For the touchpad (my machine is also a dv7-70xx) you need to touch the switch (rapidly twice) which is on the left corner of the touchpad. The following image shows where is the light (yellow circle) and where is the swich (red rectangular):
    Hope this helps.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Pavilion DV6 Notebook -VX070AV, Windows 7 64-bit- no sound

    HP Pavilion DV6 Notebook -VX070AV, Windows 7 64-bit.
    IDT High Definition Audio CODEC Enabled stwrt64.sys 6.10.6289.0
    Intel (R) Display Audio Enabled IntcDAud.sys 6.12.0.3047
    Speakers show sound coming from internal speakers.
    Speakers and Headphones Properties show- No Tone Control installed–how do I get it?
    I have updated, deleted, and reinstalled drivers, from HP support help, no luck.
    Please Help!
    Thanks
    CJ

    Hi,
    Please use the following instructions to check and fix:
       http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us​...
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • System fan 90B issues HP Pavilion g7 Notebook PC Windows 8 64-bit

    My computer HP Pavilion g7 Notebook PC Windows 8 64-bit is less than a year old and everytime I turn it on the message flashes the the System fan 90B isn't working properly. This started the first time I used it and stopped for a few months and started again. The fan isn't dirty so I'm not sure of the issue.

    Hi,
    Please use the following link to fix:
       http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03620929
    Hpe this helps.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Pavilion dv7 Microphone works, but not when setting up Wima Blackboard Webinar

    Can't get microphone to install for Wimba setup for my Blackboard class webinars. Mic works otherwise. Pavilion dv7 user.

    Here is a link to a document regarding batteries and testing the battery in HP Support Assistant.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00821429&tmp_task=solveCategory&cc=us&dlc=en&la...
    If you don't have HP Support Assistant on your system follow the instructions below to download it:
    Where do I get HP Battery Check?
    You can download the latest version of the HP Battery Check for Windows XP as a single program. Or you can do one of the following download and install it as part of the HP Support Assistant for Vista or Windows 7 for your model; or see HP Support Assistant (English Only) .
    Make sure you have had your ac adapter plugged in to charge the battery for at least 30 min before running the test from Support Assistant to get an accurate result.
    Hope this helps
    I work for HP.

  • HP pavilion dv7 microphone won't stay muted on reboot

    I have a HP Pavilion DV7 P/N-A1L97AV with Windows 7 Ultimate 64-bit.  I am having a problem with both the integrated microphone array and external microphone not staying muted when I reboot the computer.  I can mute system sounds and reboot that is still muted when I reboot, but not the microphones.  The only way to keep them muted is to mute all.  The reason this is a problem is that when I reboot, if I forgot to turn sound down I get feedback until I can mute the microphone.  I have not been able to figure out what has caused this but it is quite annoying, especially since I use the laptop with events for playback.  I do use the microphone for recording classes forweb-based classroom for elementary schools so I need it operational.

    Have you tried starting it without battery?
    Have you reseated memory.
    Try removing 1 stick of memory and see if it will start. If no joy,switch the memory sticks and try the other one.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Problem on HP Pavilion dv7-6c90el with Windows 8 Pro x64 on Video Card

    good evening,
    I just finished installing Windows 8 x64 from Win7 Pro, I was able to find all drivers for my notebook, but I have problems with the video card settings.
    My laptop is a HP Pavilion dv7-6c90el with two video cards, one run by the processor because it seems to me to be a part, and the other normally installed on the PC.
    The cards are read by Windows as:
    device 1: Intel HD Graphics 3000
    device 2: AMD Radeon HD 6700m Series (Microsoft Corporation - WDDM v1.20)
    the problem resides in the fact that the device should be only one support per second, or deactivated, as it will not. The video card AMD should be set to 1, and the intel 2. Only if I go to the "Device Manager" to disable the intel card, Windows works as if it were not present any video card, also installed driver is not correct because the card is an AMD Radeon HD7690M XT, the problem is that even if I uninstall this driver then always comes back. I also tried to download AMD Catalyst in the latest version, but can not find the card. It 's like the Windows is imposed only use the device 1, which, however, I can not disable the BIOS, because there is no voice. I note that under Windows 7 had no problem.
    I ask you to help me because I need the performance of the video card for my work.
    This question was solved.
    View Solution.

    Hello systemgvp,
    Your notebook is a Business model. Your issue would be best answered on the HP Enterprise Business Community Forums
    Good luck,
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • HP Pavilion dv7-6c66nr - Win 7 HP 64 bits - Boot manager missing

    I have a HP Pavilion dv7 with Win 7 Home Premium edition pre-installed, it is a 3.5 years old computer, seldom used by me.  As my previous computer with XP was close to the end of is life I decided to investigate if it was possible to use the Pavilion.
    I intend to have the Pavilion with the windows 7 sp1 and HP drivers, so at startup I pressed f11 to enter HP Recover Manager, chose  “Minimized Image Recover” and the software installed the intended image
    With windows 7 sp1 installed I install all windows updates till two days ago and also an handful of HP drivers updates
    Then I made 1 bootable CD windows recover disk with windows, and 1 system image windows also, that I save to a usb hd drive
    Everything was going ok but the cyberlink software could not connect with the computer embedded camera. I took several steps to solve the problem and it seems that the camera was not connected (hard disconnected).
    I was not sure if before the minimized installation the webcam was operating well and once more I used HP “Recover Manager” to return to the full installation
    As the web camera was not operating even with the full installation, I decided to return to the streamlined installation.
    I tried a short cut to the original process, and instead of going to the HP Recover Manager and a once more update of windows and HP drivers I tried to use my previous produced system image with windows, so I went to Control Panel and used windows recover from the image, copying all to the same place (I was prompt to replace a lot of existing files). At the end of the process a received a message about same errors generated by the process but I do not investigated at that time.
    When I reboot the PC I have a “BOOTMGR is missing/ Press Ctrl+Alt+Del” message and a blinking prompt
    Now if I attempt Recover Manager to do a “minimized image recover” I receive an 0xEFFFFF08 error code and if I tried the full image after a rather short time it announces that the 1st stage is finished and it goes boot to proceed with the second half of the process, it goes off and reboot with the “BOOTMGR is missing/ Press Ctrl+Alt+Del” message and a blinking prompt
    Can anyone helps me? I have no HP recover disks (it seems that HP do not sell rescue disks anymore for pavilion dv7 and Win7)
    Happy 2015 for all

    Create a System Repair Disk on another Windows 7 computer to use your computer if it fixes anything.
    If you live in the USA/Canada, call HP at this number 1-800-334-5144, and see if you can still get a set of recovery disks otherwise the WorldWide site:
    http://welcome.hp.com/country/w1/en/support.html
    If the recovery disks are not available through HP, they have them at Computer Surgeons:
    http://www.computersurgeons.com/p-20621-recovery-kit-679228-002-for-hp-pavilion-entertainment-notebo...
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • Pavilion DV9008NR BIOS problem Windows 8 32-bit

    I have an older Pavilion DV9008NR notebook:
    RAM - 2 GB RAM
    CPU - Athlon Turion 64 x2 1.6 GHz TL-50
    Motherboard - Quanta 30B9
    Chipset - NVDIA GeForce 6150
    Southbridge - NVIDIA NForce 410/430 MCP
    BIOS HP F.43 3/22/2010
    Nvidia GPU - GeForce Go 6150 (UMA)  (display adapter MS Bsic Disply Adapter C52 A.2
    This was previously loaded with WinXP SP3 and slipstreamed with nLite 1.42 to load SATA drivers.  It had previously had the BIOS flashed to F.43 (latest version).
    It was "clean" upgraded with Windows 8 Pro Upgrade after passing all tests.
    Upon rebooting, I got the  standard HP/Phoenix BIOS screen with the usual prompts for <F10> BIOS Setup and <Esc> Boot Order.
    Every time after that, the <F10> and <Esc> prompts are gone, and Win8 loads *faster* than usual.
    Win 8 functionality appears fine, and the need Ricoh 5-in-1 and NVIDIA coprocesser drivers loaded without difficulty.
    I went back to my old WinXP image, and BIOS loaded several times normally with <F10> and <Esc> prompts.
    After reloading Win8, back to problem of no prompts after first reboot.
    Trying <F10> or <Esc> during the BIOS load does *not* get you into BIOS Setup or Boot Order.
    It appears that somewhere that Win8 is "pre-empting" the normal "flow" of the BIOS.
    I do understand that Win8 does have some feature to take control to keep  Boot Sector malware from taking control.
    Is this what is happening?  (Which becomes a real problem with <F10> and <Esc> maybe needed),
    Is this a BIOS bug, or
    Is there something else.
    Thanks~

    I'm sorry but this was very difficult to read. If I understand you are having an issue installing Windows 8 32-bit. Is this right?
    If so this is not supported as per http://support.apple.com/kb/HT5628. Specifically: "If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp."

  • Hp pavilion elite e9140f pc windows vista 64-bit media smart dvd definitation file lost error

    I have a hp pavilion elite e9140f windows vista 64-bit
    My computer will no longer play blu-ray dvd's.  I have attempted to update with Cyberlink DVD.
    When asked to remove Media Smart Dvd and error comes up, Media Smart DVD difinitation file lost.
    Media Smart DVD can't be removed with with error,
    any suggestions to get past this point?
    Help and Thanks 

    Hello BRDGDD,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues using your Blu-Ray Player on your HP Pavilion Elite e9140f running Windows Vista. I am going to approach this from a couple different directions.
    First, we are going to try to put back the original drivers that came with your computer using the HP Support document: Performing a Software Application or Driver Recovery (Windows Vista), which will walk you though using the HP Recovery Manager to restore the original drivers on your computer.
    Second, if you are still not able to use the Blu-Ray Player we are going to try using the HP Support document: Using Microsoft System Restore (Windows Vista), which we will use to roll your system back to a point in time where your Blu-Ray player worked. This will not affect your personal files, but it will affect any applications you have installed between now and the date you choose and any settings you have changed during the same time.  These will have to be re-installed and/or re-changed.
    Lastly, if you are still not able to install the software or are still not able to use your Blu-Ray Player I am going to suggest you back up any personal files, bookmarks and such to a USB drive or something and then follow the HP Support document: Performing an HP System Recovery (Windows Vista), which will walk you through recoverying your computer back to factory settings.
    ***NOTE: Be warned you will loose everything so ensure you backup what you want to keep!
    If none of the above work and your still having issues it appears to be a physical issue and I think it would be best if you contacted HP technical support for repair options.
    US support link to contact options for HP products purchased in the US.
    Outside of US support link to contact options for HP products purchased outside the US.
    I would like to thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Hp pavilion dv6-1030us with windows vista 64 bit now upgraded to windows7 32 bit.

    hp pavilion dv6-1030us originally with windows vista 64 bit now upgraded to windows7 32 bit. mic is unable to send sound in skype after upgradation.
    This question was solved.
    View Solution.

    Hi,
    Try the following.
    First, uninstall Skype and when this has completed, restart the notebook.
    When windows has reloaded, download and reinstall the Chipset driver Here.
    When the installation has finished, restart the notebook again.
    Let windows fully load, then download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45044.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery, plug in the AC Adapter and start the notebook.
    Let Windows fully load, then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again.
    Reinstall Skype and see if the Mic now works Ok.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Hp pavilion dv6500 upgrade to windows 8 64 bits

    hi guys i have an hp pavilion dv6500 laptop with 64 bit processor and i want to upgrade it to windows 8 64 bit but during the installation am asked to select file or insert cd containing the drivers before proceeding with the installation. can anyone help me with a link to download these particular drivers please.....

    Have you run the Windows 8 compatibility checker?
    http://windows.microsoft.com/en-us/windows-8/upgrade-from-windows-vista-xp-tutorial
    Open the Device Manager and see which devices are installed. That is important and will save a lot of time. Verify the wireless and wired network interface devices. Otherwise we will have to find out what they are the more difficult way.
    You can install and run CPU-z  to find out which chipset and graphics device is installed. Use the tabs.  Once we know those, then finding the drivers is a possibility. The notebook may be a bit far back in generations for Windows 8, but Windows 8,1 does have a large builtin driverstore so it is a possibility.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Will a pavilion a1737c work with windows 7 64 bit

    The HP Pavilion a1737c came with OS Windows Vista Home Premium SP2 32 Bit,   AMD Athlon 64x2 Dual Core processor 4200+  2.20GHz,  2GB Ram,    Nvidia GeForce 6150 LE Graphics  and  320GB HD. Will this computer run Windows 7 64 Bit well.

    Here are the specs for your HP Pavilion a1737c Desktop Computer. I have a HP Pavilion Media Center a1632x Desktop Computer that has very similar specs as your computer. Same chipset, though yours is socket AM2 and mine is socket 939... yours is a couple of months newer with a slightly faster CPU and slightly faster DDR2 memory. I installed 4GB of memory... upgraded from the factory 1GB. Mine runs Windows 7 64-bit in this configuration without any issues and it does it surprisingly well.
    Only thing you may want to change later... is a new video graphics card, which may require a new power supply.
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • I have a Pavilion dv7-1050ea with windows vista home premium 32bit.Windows will not start

    Windows will not start in safe mode just back to blue screen error. HP recovory disks not working even in external drive. no access to command prompt. unable to install or run programs or copy any files to the hard drive. ran start up tests Memorypassed Primery hard disc passed Hard disk passed smart hard disc passed.

    I would recommend performing a system recovery.
    Here is a link with the information that is needed to perform this: http://goo.gl/bbxlv
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Maybe you are looking for

  • Carry out modification comparison for FUNC J_1I7_USEREXIT_CALC_EXC_BASE

    Dear all,                i have a concern,i have to implement a user exit in tcode j1iin in the FM J_1I7_USEREXIT_CALC_EXC_BASE .now when i try to bring in change mode it says Carry out modification comparison for FUNC J_1I7_USEREXIT_CALC_EXC_BASE fi

  • Where will Skype for Web be in Skype Community ?

    I cant login on my Mac  and my collaborators are all on Skype.   How to get invited for Skype Web Beta ?

  • How to make a custom table?

    Ok, so an assignment is due today. I am up to the last part and what you need to do it make a custom graph, I have an iMac (OS X Yosemite) and I need to make a table like the one showed on the image I attached. If you look on the right hand side of t

  • Hiding entry pages from the viewer in a Podcast page

    I have a podcast page displaying a series with 4 episodes. I want the viewer only to use the "subscribe" button. I do not want them to go anywhere else by clicking on the links on the page that take them to the entry pages. If they click on "more" it

  • Relationship between campaign code and BP Address

    Hi all, I am new to CRM. I want to know the relationship between campaign code and BP Address. Or how it links with GUID. Small query but full points. Thanks Sanket