HP pavilion dv7 microphone won't stay muted on reboot

I have a HP Pavilion DV7 P/N-A1L97AV with Windows 7 Ultimate 64-bit.  I am having a problem with both the integrated microphone array and external microphone not staying muted when I reboot the computer.  I can mute system sounds and reboot that is still muted when I reboot, but not the microphones.  The only way to keep them muted is to mute all.  The reason this is a problem is that when I reboot, if I forgot to turn sound down I get feedback until I can mute the microphone.  I have not been able to figure out what has caused this but it is quite annoying, especially since I use the laptop with events for playback.  I do use the microphone for recording classes forweb-based classroom for elementary schools so I need it operational.

Have you tried starting it without battery?
Have you reseated memory.
Try removing 1 stick of memory and see if it will start. If no joy,switch the memory sticks and try the other one.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

  • Hp pavilion dv7-4285dx won't turn on

    hp pavilion dv7-4285dx won't turn on 
    it's was working fine then stop.. next day worked and stop... now it's not working
    battery light flashing...
    trid hard reset like everyone saying that hp has a problem and we have to hard reset by holding power without cable or battery.
    http://www.youtube.com/watch?v=8sRQclCLRL0
    http://www.youtube.com/watch?v=nVULC7MRPQM
    http://www.youtube.com/watch?v=sQgu1lpK_cM
    what to do

    Have you tried starting it without battery?
    Have you reseated memory.
    Try removing 1 stick of memory and see if it will start. If no joy,switch the memory sticks and try the other one.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Pavilion dv7 Microphone works, but not when setting up Wima Blackboard Webinar

    Can't get microphone to install for Wimba setup for my Blackboard class webinars. Mic works otherwise. Pavilion dv7 user.

    Here is a link to a document regarding batteries and testing the battery in HP Support Assistant.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00821429&tmp_task=solveCategory&cc=us&dlc=en&la...
    If you don't have HP Support Assistant on your system follow the instructions below to download it:
    Where do I get HP Battery Check?
    You can download the latest version of the HP Battery Check for Windows XP as a single program. Or you can do one of the following download and install it as part of the HP Support Assistant for Vista or Windows 7 for your model; or see HP Support Assistant (English Only) .
    Make sure you have had your ac adapter plugged in to charge the battery for at least 30 min before running the test from Support Assistant to get an accurate result.
    Hope this helps
    I work for HP.

  • HP Pavilion dv7 Microphone delay, Windows 7 64-bit

    I bought this notebook HP Pavilion dv7 a few weeks ago, so I tried recording with the external microphone and there is a very annoying delay which doesn't allow me to record audio properly. I haven't changed anything, it just doesn't work. How can I fix this?

    Hi,
    Please use the following instructions to check and fix:
       http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us​...
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Pavilion dv7-4087cl won't start-up

    Hi, I have an HP Pavilion dv7-4087cl with Windows 7 Home Prem OA. There have been no installations or upgrades made. Everytime I turn on my computer it becomes a black screen then it says "Boot Device Not Found Please install an operating disk. Hard Disk (3FO)" I don't know what any of this means. It also allows me to view system diagnostics so I can run a start-up and run-in test. My memory is 100% fine but the start-up is a failure. Please help.

    Sounds like the hard drive has died, not uncommon in laptops. You can replace it with a retail laptop hard drive, but will need Recovery Disks to install Windows-hope you burned your set? If not you can >> order from HP for a small fee.
    If you need help selecting a new hard drive post back. Just be sure to purchase one of at least as large a capacity as you have now (640GB) in order to use Recovery Disks. Can be>> larger capacity, but not smaller. Your>> Service Manual has instructions for replacing hard drive.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Blue Yeti microphone being activated by OS - won't stay muted!

    I upgraded to Yosemite last night and I love it but for one very annoying bug: I use a Blue Yeti USB microphone as my input device, but since it has such an active diaphragm I keep it muted using the front mute button (turning the input to zero doesn't quite do it) to prevent feedback. Since upgrading, there are a huge number of applications that "un-mute" the mic without my input. Anything, it seems, that might potentially use a microphone activates it. As a result, if I have music playing I will suddenly have the mic feeding back without my consent - very annoying! Is there a fix to this? Any ideas?

    It seems that any time a system sound of any kind is played it trips the mute switch. Very annoying.

  • Pavilion dv7 3079wm won't power up with/without battery or ac cord

    Tried to power up with a.c. cord or battery. Leads flash once attempts to start, then goes out.

    I hope you folks won't mind my piggy-backing on this thread.  I have a very similar problem with a dv7 (belongs to my grandmother).
    When I plug in the AC adapter, the small LED next to the socket usually does not light up, but will flash briefly when the power cable is removed.  The AC adapter is fine, because I've used it to charge and run my dv5 with no problems.  If I unplug and then plug the AC adapter into the socket repeatedly, eventually at some random point the LED will stay on.
    However...
    The battery light is slowly flashing.  It flashes anytime the AC adapter is plugged in (whether or not the LED next to the jack lights up).
    The computer won't power up.  It tries to for a second or two, then shuts down... as if the battery was critically low.
    Now the thing that puzzles me -- The computer won't start up on AC power without the battery installed.  I can do this on my dv5 with no problem.  It does not require the battery to be installed.  I figured if the battery is completely dead in the dv7, that it may be confusing the system and not allow it to start at all.  But, trying to start up the dv7 without a battery does absolutely nothing at all.
    I'm hoping that the dv7 is designed to always work with a battery and that all I need to do is just install a new one.  Does that seem sensible?  I just don't want to buy one (they cost a whopping $140 from HP!) only to find that the computer is suffering from a more serious problem.
    "If you keep an open mind, life will give you more possibilities."

  • Internal speakers won't stay muted

    Help! Can anyone provide a clue why the internal speakers on my 20" iMac are turning themselves back on whenever I restart my system, even after I muted them prior to the last shutdown?
    Whenever it happens, I get a fairly thunderous startup chime. Plus, the chime is coming from the internal speakers even though I have a set of external speakers plugged into the iMac.
    Any suggestions or troubleshooting tips would be greatly appreciated!

    Hi, after the last update did you Repair Permissions? (usually it's a good idea to RP before & after updates) after RP I would reboot then reset your Sounds to your requirements. Also try resetting the Midi settings...L

  • The DRIVERS on my HP Pavilion dv7-6c95dx WON'T INSTALL DEVICES.

    Please if anyone knows how to fix this i will appriciate all the help,  a few months back I did a a hard reset on the laptop and since then the drivers always acted weird when i tried plugging in my ipod or phone but i didnt pay it any mind now the drivers will not install any of my devices not my phone my printer ipods ETC 
    When i go into device manager and try to update driver software manually  
    i click on "SEARCH AUTOMATICALLY FOR UPDATED DRIVER SOFTWARE"
    THEN  I GET AN ERROR MESSAGE THAT SAYS 
    "WINDOWS ENCOUNTERED A PROBLEM INSTALLING THE DRIVER SOFTWARE FOR YOUR DEVICE"
    "ACCESS DENIED"
    This happenes with every device i plug into the ports.
    PLEASE HELP ME!!!!!!
    THANK YOU IN ADVANCE!!! 

    Hi @KaayHpBeast ,
    Welcome to the HP Forums!
    It is a terrific place to find answers.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that you are unable to update the drivers manually that you receive an error " "WINDOWS ENCOUNTERED A PROBLEM INSTALLING THE DRIVER SOFTWARE FOR YOUR DEVICE"
    "ACCESS DENIED"  ".
    You could also try a restore back to when it was working  properly.  HP and Compaq PCs - Restoring Windows to a Previous Point (Windows 7)
    If that is not possible or does not work I would try installing the original drivers from the recovery manager and then run the HP Support Assistant   to obtain the HP updates.
    Using Recovery Manager to Restore Software and Drivers (Windows 7)
    If the issue remains, I suggest you do a full recovery back to factory.
    Performing an HP system recovery (Windows 7)
    During this process you will receive an opportunity to backup your personal files to prevent data loss.
    Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
    At any time you may choose to contact HP support for assistance as they can remotely access your system to aid in resolving issues.
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • HP Pavilion dv7-1175eo Won't launch windows

    When i start the computer up i get to a screen telling me that windows had a problem being launched, and it gives me the option to start in fail-safe mode or start it normally. Neither options works. It's goes as far as showing the initial windows loading screen, but then the screen just goes black and nothing happens. I tried doing a harddrive test but it wouldn't go past 0% and gave an error message. 
    Could this be fixed by doing a system recovery?
    This question was solved.
    View Solution.

    If you have received an error(303/301/3F0/Immenient HDD Failure/Smart DST Error) during Hard Drive Self Test, that confirms a hard drive failure, if covered under Warranty, you may contact HP and have the drive replaced, or purchase a new one.
    The issue cannot be fixed by a System Recovery.

  • Workgroup setting won't stay after system reboot

    Even though this issue was reported in 10.7, the issue still remains in 10.8.
    Background:
    I have a home network consisting of a iMac (2011) and two Windows 7 PCS connected to a Netgear Gigabit switch. I on occasion transfer files to and from my Mac and my Windows PCs.
    Pre OSX Lion, This situation worked fine. But since Lion and now Mountain Lion I am no longer able to copy files to my Mac from my Windows Pcs. Copying files from my Mac to my Windows Pcs work fine. In troubleshooting this issue, I found out in the Network system preference option after selecting ethernet and then the advanced button, then clicking on the Wins tab, that the Netbois and Workgroup fields are blank. After providing a Netbois name and the workgroup name the same as the Windows Pcs, then selecting the OK button generally works. Sometimes I have to go in multiple times before it takes the information but once it does everything works as it suppose until I reboot or shutdown and startup. If I do either when I go back into the Network in the System Preferences the fields are blank again.
    I've followed some of the suggestions from the other support documents but they did not work for me:
    1. Deleting the com.apple.systemperference.plist file and .lockfile
    2. Create a duplicate ethernet service add the necessary changes then make that ethernet service the active one after disabling the original one.
    None of these worked. I submitted on Apple Feedback this issue when I was still running OSX 10.7.2 but it never was fixed and now Mountain Lion behaves the same way. I will be submitting once again in hopes someone at Apple pays attention.
    It seems this issue has to do with the Apple inhouse developed SMB share implementation. When they was using the SAMBA software I had no issues.
    I even did a clean install of Mountain Lion to make sure the problem would not be transferred from Lion. Didn't make a difference.
    Any help would be appreciated.

    Thanks,
    That work around is great. A lot easier that typing in the info repeated before it takes just to have to do it again after the next reboot. If anyone has access to the Apple Bug Reporter, please add this bug for all of our sakes.
    Two things.
    1. After the initial ML install, the word workgroup was in the workgroup field. And that did not disappear after each reboot. Only when changing it to something else is when the problem manifests.
    2. I wonder if the Macbook Air and The new Retina Macbook Pro has this same issue being that they too come with SSD styled storage. If anyone have these macs please reply with your findings.
    Thanks
    p.s. Again would really appreciate someone with Apple Bug Reporter access to log this issue. Thanks again

  • HP DV7 6135 bottom cover and battery won't stay in

    For the past few months, when I picked up my laptop, sometimes the battery and/or the panel popped off. It was annoying and I even made sure the slider was in proper position but I noticed that the battery would pop out with just a gentle touch.  It gets really annoying when the battery pops out unexpectedly while I was just moving such as to change position on a chair or to walk to use the restroom.  Once the 12-cells pack missed my toe and left a half-inch deep dent in the wood floor, battery has never worked since and had to be replaced, thanks HP!
    Today the bottom panel has popped out yet again and this time a few little black pieces came down with it, and the panel won't stay in anymore. Looking under bright flash light, it seems the plastic slider that normally locked or released both the battery and the panel has several broken pegs and cracks.  Looking in Google, it seems to be a common problem with 6000 series DV7?  Is there anything I can do short of buying an used 6000 series cheap off eBay and swapping the bottom shell?  Gluing the panel is one option but not the battery as I switch between 2 if I'm away from power source a long time.
    Replacing it outright with a non-HP brand laptop is also an option but it gets costly when one factors in getting a new battery or 2 for long power on time in the field. Batteries are generally not cross-brand compatible (ie HP battery won't work in Dell model)

    I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
    I worked on behalf of HP.

  • Microphone not working on Pavilion dv7

    I have an HP Pavilion dv7 with Windows 7.  I have had it for over 2 years and am just now attempting to get the microphone to work and having no luck.  I have done the Audio Troubleshooter which could not identify the problem.  If I go into the Control Panel > Sound and the Recording tab it lists External Mic (Currently unavailable), Integrated Microphone Array (Default Device), and Stereo Mix (Ready).  I assume this means there is a mic built in, but am not sure if this is correct.  I have never used a microphone before and don't know what the problem might be.  Any advice would be appreciated.

    Hi i have the same computer with the same problem if i use a external microphone it work but due to the fact i hate the external microphone i don't understand why i cann't just talk...if some know please let us know thanks

  • Built-in microphone in HP Pavilion dv7-6b77 dx Entertainment PC.?

    I have a pavilion dv7-6b77 dx entertainment pc.  does this model have a built-in microphone or not?  Shouldn't it have one since it's an entertainment PC?  Thanks.

    Hi,
    Please enable Microphone in Recording devices as follows:
    1. Right click speaker icon (right hand corner)
    2. Select Microphone devices
    3. Right click Microphone
    4. Enable it
    5. Click Apply/Ok
    Regards.
    ps. For Windows 7 & Vista
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Microphone issue with pavilion dv7

    I got a Pavilion dv7 for Xmas (don't ask me which model, as I can't find it using any of HP's help info!!!). I used a microphone with it, no problems. Recorded great, everything went smooth as pie. After the system auto-updated (it's the only possible cause i can find, as no other changes were made), now my external mic will not work worth poop. The recording levels are extremely low, tons of noise. I know it's not the mic, as it works OK on other machines. I can find no documentation to help me work with the Beats Audio system. Can anyone please help before I throw the computer or myself out a window!!!!!

    I bought this HP Pavilioh dv7 w/Windows 7 Pro on it around November 30, 2012.  I never bothered trying to do anything with the microphone until this month.  I find that if there is no attached mic it will not record at all, although after spending 5 hours on support with HP they could not come up with a solution.  If I attach an external mic it will barely record anything.  I haven't been able to find any way to adjust mic settings and am at a loss.  Earlier in this string it was suggested to go to device manager and revert to the previous driver.  However, when I go there there is no previous driver to revert to.  An external microphone will record a little if I yell in to it.  I don't want this to be my first experience with HP, that a simple device fails and the whole unit will have to be shipped in for hardware replacement.  Any information you can advise I will be glad to try.  I am a fairly skilled user, therefore I am likely to be able to execute whatever is needed.  Bill Harpe.

Maybe you are looking for

  • No video on podcasts

    I have several video podcasts thAt play on my apple tv, but with no video. They are playing as audio only podcasts. The same videos play fine in iTunse on my iMac and on my iPad. Any idea why? bob ATV 2.0 the black hockey puck, running OS 5.1.1

  • How to parse multiple xml documents from single buffer

    Hello, I am trying to use jaxb 2.0 to parse a buffer which contains multiple xml documents. However, it seems that it is meant to only parse a single document at a time and throws an exception when it gets to the 2nd document. Is there a way I can te

  • OSB project deployment problem with MFL file

    Hi, I have created a OSB project to transform a xml message into a text file. For this I have created a mfl and the necessary proxy/business service. I can generate the sbconfig.jar from OEPE tool. But while trying to deploy the sbconfig.jar (generat

  • Set-up tax Calculation procedure for Morocco

    Where can I found information to set-up the tax Calculation procedure for Morocco and the VAT codes

  • WLC 5508 and CAP-1552E

    Hi , I am trying register external Wireless AP CAP-1552E  , with controller 5508 ( version 7.4.100). I have a couple of issues and I am bit confused. AP does not want to register to the controller , on layer 2 or layer 3 , even if I use DHCP option 4