Hp pavilion dv7 notebook pc caslexec stop working

hp pavilion dv7 notebook pc caslexec stop working & stop updating..
Please email me at {Personal Information Removed}

Hi,
Please download and run it on your machine to fix:
   ftp://15.193.112.23/pub/softpaq/sp5200-52500/sp52110.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Hp pavilion dv7 notebook numeric keypad not working

    The numeric keypad on my hp pavilion dv7 notebook does not work.  I can't get the num lock to work or any of the number keys to respond.

    Hi,
    While this could be a hardware issue, it's always worth trying the following.
    Open windows Control Panel, open Device Manager, expand Keyboards, right click the entry 'Standard PS/2 Keyboard' and select Uninstall.
    Shutdown the notebook.
    Then unplug the AC Adapter and then remove the battery.  Hold down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Note:  If the keyboard doesn't work when trying to access or navigate the Bios Menu, then this is probably a hardware fault.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Please Help.. HP Pavilion DV6 Notebook has totally stopped working

    Hi
    If anyone can help me I would be grateful. My computer just stopped working today and left me with a blank screen, when I try to turn on I just get the HP logo. I have run a hard disk and memory test and they both came back OK.
    I have my life on here and when I took it to the Geek Squad they said it was probably the hard drive and wanted tons of money to TRY and fix it.
    I have a blank black/blue page, I have removed the battery and tried a hard start, I replaced the battery, I do have a flashing caps lock light and my mouse pad is illuminated.
    I don't know what to do next and have my life on this computer including many family photos that cannot be replaced.
    Any help or ideas would be gratefully received
    Thanks

    Hello Nikki7,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. 
    Since you are facing a Boot issue on your HP Pavilion DV6 Notebook PC, please click on the web links given below should be able to help you to resolve the issue on your unit. 
    HP Notebook PCs - Use Hard Reset to Resolve Hardware and Software Issues
    HP Notebook PCs - Blank Screen LED Error Codes
    HP Notebook PCs - Troubleshooting No LED Lights Glow During Startup or Boot
    Let us know how it goes!
    *Although I am an HP employee, I am speaking for myself and not for HP.
    *Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    * Click on "Purple Thumbs up" button to the left side of my post to say thanks!
    Regards
    Ahmed

  • Hp Pavilion dv6 Notebook , Driver display stopped working and has recovered

    Hi, I have a problem with my driver display.... 
    I installed the Autocad program , and after 2 weeks, every time that I open the Autocad, after 4 or maybe 5 min. the screen goes black and after that a note shows up saying: Driver display stopped working and has recovered. I Try to update everything using the Hp support assistance and still i have the same issue. I don't know much about the computer and the driver so I will appreciate if  somebody give me a solution. Thank you!!!

    Hello @youleeus,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how the driver display has stopped working, that it has recovered, and I would be happy to assist you in this matter!
    To further diagnose this issue, I recommend following the steps in this document on "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista. This should help prevent the GPU on your computer from timing out.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • HP Pavilion dv7 Notebook PC won't play blu-ray anymore

    HP Pavilion dv7 Notebook PC used to play blu-ray discs. it had been a while since i have tried to play one and my computer has, no doubt, updated countless times since.
    when i load a blu-ray disc the HP DVD player starts, and there is a black screen which says 'loading' and to press play. pressing play does not start the disc. it used to ask me if i wanted to check for updates, but selecting 'yes' never seemed to find any, and selecting 'no' just brought you back to the same place.
    i have tried downloading the sp50935 DVD update to fix the problem, but when installing i get a message that says the 'install has been stopped due to an unsupported operating system' (to that effect), but i use Windows 7 Home Premium 64-bit Service Pack 1, the same that came installed when purchased.
    any ideas?

    Hi jim_douglas,
    Welcome to the HP Forums! Sorry to hear about the blu-ray issues. I will be happy to help but I will need your product number?
    Find your product number on a notebook:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00033108
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • HP Pavilion g6 Notebook PC - Keyboard not working

    HP Pavilion g6 Notebook PC - Keyboard not working
    My Windows 8 - 64 bit  laptop keyboard stopped working. I tried to uninstall and reinstall as explained in the support pages. but doesn't seem to work.  Is it dead?   what is the solution.  Please help
    Thank you

    Hi,
    While this could be a hardware issue, it's always worth trying the following.
    Open windows Control Panel, open Device Manager, expand Keyboards, right click the entry 'Standard PS/2 Keyboard' and select Uninstall.
    Shutdown the notebook.
    Then unplug the AC Adapter and then remove the battery.  Hold down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Note:  If the keyboard doesn't work when trying to access or navigate the Bios Menu, then this is probably a hardware fault.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP Pavilion dv7 Notebook starting with Blank White Screen--He​lp??

    I've had an HP Pavilion dv7 Notebook for a couple years now. Today I go to start it up (without the power cord plugged in), and a completely white screen appears. I'm thinking, maybe it's still starting up/working some kinks out. Then I hear the Windows 7 twinkling start up sound that usually happens when you get to your log in screen. So it seems the computer itself is working, but there is zero display on the screen. If anyone has any good advice/experience with this/knows how I can fix it or what I should do, PLEASE let me know! Computer problems are so distressing

    I had this problem with my father's pavillion.
    There was a broken pin in the screen socket on the motherboard so I guess it was always making poor contact until one day this pin must have broken off completely and the screen would only display completely white.
    I inserted a fine solid wire (not multi-strand) into the plug at the right point so that it only just stuck out enough to make contact with what was left of the pin in the socket, whilst being fully inserted into the plug.
    I then taped the plug/socket together to make sure it didn't loose contact by coming loose.
    Seems to have solve the problem in the short term (but the socket should need replacing for a long-term fix).

  • HP Pavilion dv7 Notebook PC graphics card issues

    I have a HP Pavilion dv7 Notebook PC (Product number: QG704EA#B1A) with an AMD radeon HD 6700M graphics card. Most of my games crash, im always given a graphical error, i experience freezes, lagging and general overheating. This only happens when playing games.
    I have done every update Intel, radeon and hp offers and nothing works including bios updates. All my research tells me its just a bad compatibility with the graphics card. Can that really be true? Have i wasted over a thousand euro on just bad hardware??
    My warrenty expired already, i had no idea this could happen with a laptop.

    hi , 
    welcome to HP support 
    your problem needs some effort to be solved
    i can understand your setuation so i will help you
    HW problems 
    >> you may have a cooling system problem check the cooling system 
    >> use cooling fan program to check the temps
    SW problems
    >> use a good OS version / i recommend Win 7 Enterprise x64 
    >> make sure you have no viruses / i recommend using NORMAN malware tool 
    >> make sure that the system partition (C) has a good free space 
    >> make sure you are using the latest drivers 
    >> make sure you have all the drivers available for you 
    >> VGA driver is very important use the one provided from HP drivers website not from any site even AMD.com
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the left to say “Thanks” for helping!
    Mark Th. Antonio
    Faculty Of Engineering Alexandria University

  • AMD Radeon Driver problem in Pavilion dv7 notebook

    I have a pavilion dv7 notebook and for the last couple months I have been experiencing problems with my graphics driver.
    It began with a notice that my driver was out of date, so I went to the AMD website and attempted to install the update. I ran the dxdiag tool to find that I have a AMD Radeon HD 6620G graphics card. I could not find my product on the list to manually install the update, so I tried the amd driver downloader tool and it had a problem recognizing my graphics card. I then tried to update it through the HP Support Assistance and that seemed to work for awhile.
    Yesterday my screen changed to the lowest resolution and a notice came up that it wasn't recognizing my graphics driver. I have again tried to manually update from the AMD website. When that didn't work I downloaded the AMD driver downloader and after installing all it told me is that "your computer does not contain a proper graphics adapter" and closed the program.
    I am uterally lost at this point, and any assistance would be greatly apreciated.
    This question was solved.
    View Solution.

    ***** Disclaimer*****
    This is NOT official HP Customer Support and I, as most other persons on this forum, do not work for HP. This is a peer-to-peer user supported forum for HP consumer class products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Any reply from a HP employee represents their own opinion and not that of HP's.
    AMD doesn't support the custom HP graphics system and will not provide drivers for it. Typically, HP doesn't provide "routine maintenance" updates and generally only releases updates to fix known issues. You could take the computer to a professional, however they will be capable of doing nothing more than I have suggested and maybe not even that much.
    If you have any further questions, please don't hesitate to ask.
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Hp c4280 photo-smart added to new hp pavilion dv7 notebook. printing custom sized paper won't center

    I recently bought an HP Pavilion dv7 notebook and added my HP C4280 printer. It prints normal things fine, but when I try to print with custom size paper (for instance, 5" by 10" notecards) and want my information centered in the middle of the page, the alignment prints it in the middle of an 8.5" by 11," way off center. I've read help on word and hp and can't find an answer. The only difference is an updated version of word.
    I did download the patch and had no luck with that. Any suggestions would be great! Thanks!

    Hi - It definitely sounds like the SW or printer driver isn't recognizing the paper size.  First thing I would do is make sure that the paper size in both the printer driver and in Word match.  For the printer driver, go into File, Print and you should see an option for Printing Options or Printing Properties.  Click there and verify that you've got the paper size set correctly.  In Word (not sure which version you're using) 2010, go into Page Layout and choose Size to make sure it matches the printer driver.  Try printing again.
    I'm assuming you're using the printer driver that came with the printer?  If not, you can download the latest Win7 driver from here.  Once downloaded, install it and follow the steps above.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • How do I enable TPM in the bios on Product name: HP Pavilion dv7 Notebook PC

    Hi,
    I have run into a problem trying to enable MS Bitlocker on Windows 8.1 on
    Product name: HP Pavilion dv7 Notebook PC
    BIOS version is: F.1C
    In the Windows UI, the TPM (Trusted Computing Module) management console says that I need to enable TPM in the BIOS.
    Issue:
    There does not appear to be any proverbial "on" switch in the BIOS for TPM versions 1.2 (or 2).
    Question:
    Anyone out there know how to resolve this?
    I know there may be a way to get around this using group policy on the machine or to buy a USB key solution. 
    Looking for the hardware solution in the laptop if possible please.
    Thanks in advance for any help.

    Hi:
    As far as I am aware, HP consumer notebooks do not have a Trusted Platform Module chip.
    Check the device manager...if there is a TPM chip, there will be a Security Devices category in the device manager, and you would see the TPM chip listed under that category.
    If not, then there isn't one.

  • On both my desktop and notebook, sync just stops working and needs to be set up again! Although my account is still there ?

    On both my desktop and notebook, sync just stops working and needs to be set up again! Although my account is still there ?
    I have windows 7 on both computers and I use the paid version of Roboform (which does not encounter any problems!) So, I really need my sync to work and keep working. Please help......

    Do you mean that after closing the browser your Sync set up is gone and you need to Set it up again?
    This is, generally, because your privacy settings are too restrictive and you are deleting the password of your Sync account.
    You can modify this in the Privacy tab of your Preferences/Options window. Select Remember History or Use Custom Settings in the drop down to configure the level that you want.

  • I have a hp pavilion dv7 notebook pc and i'm get and error message that my integrated camara is off

    i have a hp pavilion dv7 notebook pc and i'm get and error message that my integrated camara is off, and when I go into skype or cyberlink i can not see me

    Hey Sam55555,
    I see that you're having an issue with the webcam. 
    Could you provide me with a model and product number of your notebook.
    So that I may look into this further to try and provide you with more helpful instructions.
    Also, this Document should help you out. If it doesn't let me know the full model name and i will find a document for your notebook.
    What i consider doing is the section that says "Reinstalling the original webcam program that came with your computer".
    THX sam

  • Hp Pavilion dv7 notebook Beats Audio speakers on their way out.

    my beats audio speakers on my hp pavilion dv7 notebook computer  have lost much of their volume and i'm not getting clear sound.

    Get your Product Number by pressing Fn + Esc key or check the Service Tag attached to bottom, may be under battery.
     Go to the link below.Enter your Product Number .After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
    Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop. After Windows loads, install IDT audio using the downloaded file.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • HP Pavilion dv7 notebook, Windows 7: How do I disable an audio jack?

    My Pavilion dv7 notebook includes two audio jacks for headphones on its right side (my left when facing it.) Long story short, a hefty piece of an iPod headphone has dislodged and been stuck inside one of these two jacks; there's no way I'd be able to remove it without taking apart the notebook. I can still receive audio via headphones when I plug headphones into the other jack, but I can no longer receive audio from the internal speakers. 
    I'd like to diasble both headphone jacks manually when I'd like to hear the speakers --  but I can't figure out how. When I access my 'Speakers and Headphones Properties' (IDT High Definition Audio Codec, through Sounds --> Playback Devices) and attempt to disable the device, all sound is disabled. There appears to be no way to selectively disable either just the speakers or just the headphones. 
    Any ideas? 

    ...I'm still curious as to whether I can receive any assistance regarding this issue.

Maybe you are looking for

  • I can no longer render in FCP 6 after upgrading to an AMD Radeon HD 7970 3072 MB

    Hey, I purchased a AMD Radeon HD 7970 3072 MB that was modified to work on a Mac from MacVideoCards.com. I'm editing with FCP 6 and I find that I'm unable to render files anymore. I get the specific effect name followed by error. Would this be relate

  • Exportting a PDF with bookmarks

    How do I export report to PDF with bookmarks. The report has groups with each group needed as bookmark. This this avialable in JRC.

  • User Menus via Roles

    Hi All, We have Netweaver 2004s, Release 10.2. I have added some new menu roles to our IP roles. These menu roles were designed to allow users to save workbooks into a common area which all could access. This was done via S_USER_AGR, activities 01, 0

  • Purpose of  Enable connection pooling

    Hi Gurus, What is the purpose of Enable connection pooling in the connection pool of the physical layer.If we gave Enable connection pooling time out as 5 minutes and our report query is taking 1 hr time to execute a report what it will happens weath

  • Rate Routing Error

    Hi,    I am getting the following error while doing ShiftControlF1 (i.e. Checking the task list errors) The error is comes for the Inspection characteristics and it is as follows, "Message no. QP258 QM data: maintain time-related data" What should i