Hp Pavilion dv7 Sound goes in and out and makes clicking noise

Recently my laptop has been having wierd audio issues and I'm not sure the cause. The laptop will get about 10-15 minutes into a movie or any sound extensive activity and the sound starts cutting in and out and making a weird clicking noise every time it does. One think I found helped sometimes was to plug in headphones into the headphone jack, however the laptop would randomly switch between the headphones and the external speakers on the laptop even if left alone. Sometimes it will just play out of the external speakers perfectly fine if I had headphones plugged into the jack. I was thinking that it may be the sound card, but I honestly don't know. Could someone share some insight on my problem?

Hi ,
Welcome to the HP Forums! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. Thank you for posting. I have read your post, and I understand that you are experiencing issues with speakers and headphones. The sound switches between the devices. And if you do not use headphone, the speakers will not work in 10 -15 minutes, and it will not play the sound right. Please test your laptop along the steps on this document HP Notebook PCs - No Sound from Speakers (Windows 8) And let me know if it helps. Regards,

Similar Messages

HP Pavilion dv7-4083cl (w/ Intel Core i5 and ATI GPU): Which is its normal temperature?

Hello,
I have a question about HP Pavilion dv7-4083cl (w/ Intel Core i5 and ATI GPU):
Which is its normal temperature?
Environment: 24 °C (Celcius)
HWMonitor and Real Temp agrees with the numbers find below.
The two CPU Cores starts at 37 °C and in about an hour are at 53 °C, with CPU usage under 10%.
The GPU starts at 34 °C and easly goes to 57 °C, with some peaks at 72 °C
Regarding "Hewlett-Packard 144B": (under low/idle CPU usage)
TZ01: starts at 40 °C and very fast goes to 55 °C or 65 °C (and more, under CPU load)
PCH starts at 59 °C and very fast goes to 76 °C (and stays there)
GMCH: starts at 40 °C and very fast goes to 55 °C or 65 °C
ATI Mobility Radeon HD 5470 (TMPIN0): Starts at 34 °C and easily goes and stays at 57-58 °C
Note: I'm also using a cooler (two fans, under its base)
If I run Real Temp (v. 3.6) "Sensor Test", the cores goes up to 100 °C , and even a bit more.
Which is the normal / expected behavior / operational range?
Steady PCH at 76 °C is it normal?
TZ01, GMCH at 55 - 65 °C is it normal?
i5 Cores at 55 °C is it normal? (and easily going to 70 °C or more)
GPU (ATI) at 57 °C is it normal?
is it normal to climb up to 100-105 °C under a 5 minutes high CPU usage operation?
Thanks!

i roll back to bios F.25 which is the older version of bios that support my device but still suffering from same D90 system overheating error.
i can't contact hp support or send it to offical hp center currently coz i am from Egypt and i live in far town

HP Pavilion dv7 Sound

HP Pavilion dv7 - Sound locks up and howls, then plays again

Hello,
Please check this document, see if that helps, it contains all the basic TS steps.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&tmp_task=solveCategory&cc=us&dlc=en&la...=
Thanks,
I work for HP! Please remember to provide and if this helped click ON

After i plug in my iphone 5s, it always asks me to trust the laptop, i click trust and my laptop makes that noise as if I've pulled my phone out, but i haven't, so now my itunes doesn't recognize my phone, please please help me?

After i plug in my iphone 5s, it always asks me to trust the laptop, i click trust and my laptop makes that noise as if I've pulled my phone out, but i haven't, so now my itunes doesn't recognize my phone, please please help me?
THis also happened with my old iphone 4s
I need help!

Hi loist,
Thanks for visiting Apple Support Communities.
If your iPhone is not being recognized by your computer after you click "Trust," the troubleshooting steps found here can help:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jeremy

HT4623 Tried to update my iPhone 4 this morning and it's frozen. When I turn it off and on again I just get the apple sign fading in and out and cannot use the phone

Can anyone help. I tried to update my iPhone 4 this morning and it just got half way through the update and froze. I managed to turn it off eventually, but now all it will do is show the apple sign fading in and out and is un usable. It's not even being recognised as plugged into the laptop!!!!!!!

Hello, Spedellen.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H.

The photos imported are zooming in and out and are out and in focus-how to resolve this?

Hi all,
I just started creating a short film which will consist of photos and voice over. After importing the photos, each of them is being zoomed in and out and is once slightly blurry and once in focus- none of the effects are on and I am a bit stuck. Does anyone know how to get rid of this?
Any help would be appreciated.
Thanks!

The effect you are seeing is known as the Ken Burns effect, which shows panning and zooming on the images. This is iMovie's default setting for still photos. To change this setting, go to iMovie's Menu and select File>Project Properties. In the window that opens, for the item "Initial Photo Placement" choose Fit in Frame (click on the disclosure arrows). The other options are Crop and Ken Burns. You will need to do this for each Project that you start - change the setting before dragging photos to the Project.
For your current project you will also need to change the setting for each image already inserted, given that they have already been included in the project. To do this on an image, there are several options. One way is to click on the image (clip) then press the C key on the keyboard. In the viewer you will see selections for Fit, Crop and Ken Burns - select Fit, then click on Done. Now the photo will remain stationary, with no pan or zoom.
Another method is to click on the small gear icon at the left corner of the clip, then select Cropping, Ken Burns and Rotation from the pop-up menu. Again, the various selections will appear in the Viewer. Also, you can click on the Crop tool in the centre toolbar (directly to the right of the microphone icon).
To change the setting for a number of photos (rather than doing them individually), select them by clicking on the first photo then clicking on the last one while holding down the Shift key - that's assuming they are all grouped together (contiguous). If not grouped, then click on each one while holding down the Command key. Once all clips have been selected (highlighted with a yellow border), you can make your selections as to Fit, Crop and Ken Burns, as described earlier. All highlighted photos will then have their setting changed. Don't forget to click on Done after changing the setting!
John

Just downloaded LR 2015 from creative cloud and when I click icon to run it flashes in and out and will not open. I have a macbook pro 13" retina

Just downloaded LR 2015 from creative cloud and when I click icon to run it flashes in and out and will not open. I have a macbook pro 13" retina

Hi Frank,
You can follow the article: Sign in, Sign out | Creative Cloud desktop app to sign out and sign in back again to Creative Cloud and try to launch your Lightroom 2015 application.
Let us know if it works or not.
Thanks,
Ratandeep Arora

Today i updated my i phone 4 to new update IOS 5.1 and now when incoming calls are coming in my phone is not ringing and i have no click noises on my keypad.

Today i updated my i phone 4 to new update IOS 5.1 and now when incoming calls are coming in my phone is not ringing and i have no click noises on my keypad.Even though i have been into my settings to check if on. can anyone help?

Have you checked your sound prefs after you updated the OS? It's possible they got changed during the update.

HT1338 If there is no sound/music playing, computer starts to make white noise. After sound/music starts, computer pops speakers/headphones. How can I fix this?

If there is no sound/music playing, computer starts to make white noise (unless muted). After sound/music starts, computer pops speakers/headphones (white noise stops). How can I fix this?

Hello Stacey,
What all devices do you have connected?
It sounds like a Ground loop... voltage leaking somewhere.

Upgraded window from vista to 7 on pavilion DV7 sound not working

Pavilion DV7 1468NR upgraded windows from vista 64 to windows 7 64 sound not working

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45073.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
If you still have no audio, open windows Control Panel, open Administrative Tools and open Services. Check that the following services are all showing as Status= Started and Start-up Type= Automatic
Audio Service
Multimedia Class Scheduler
Windows Audio
Windows Audio Endpoint Builder
If you need to make a change to any of the above, just right click the service and select Properties, then in the dropdown box next to 'Start-up type', select Automatic and click Apply to save the change. Then click the Start button.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Pavilion 25xi has power button lock out and keeps turning itself off

My Pavilion 25xi has the message "power button lock out" and we have tried holding it for 10 seconds (hard with a swipe button). We have also disconnected the power for 30 sec and then reconnected. All these to no avail. It also id prone to turning itself off and when the screen is reset, there are no icons and none of the programs on the task bar are able to be opened. This means turning the who;le computer on and off, thus losing any work on the computer that was in process. Help!

Hello @BillHendo,
I understand that you are getting a 'Power Button Lock-out' error when you push the power button on your HP Pavilion 25xi monitor.I am providing you with some steps you can try below:
Step 1. Hold the power button down for 30 seconds
Step 2. Unplug the power cord from the back of the monitor and the wall
Step 3. Hold the power button down for at least one minute
Step 4. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 5. Press the Menu button on the monitor
Step 6. Navigate to the Factory Reset option and select it
Step 7. Try different cables between your computer and monitor.
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Pavilion 9812,sound goes off/on,just like a woman

just recently my sound goes off and on with no special reason. do i have a sound card issue ,loose wiring ?

is that title really necessary?

Sometimes the sound goes louder then quieter and crackles a little on my computer

So when I had tech support, I talked to them and they had me remove the drivers through device manager and then it reinstalled by itself when I restarted and it helped for a week or so. But it wasn't a long term solution. Also, another issue I have is on some videos (somewhat rate), it won't play sound unless I go into playback devices in the sound menu and then click on "configure" for "speakers/headphones" and change it from 5.1 surround (which I don't have) to quadraphonic, hit next and uncheck the "surround speakers." Not sure why it always goes back to 5.1. I have two speakers and a subwoofer from logitech. I have an HP Envy H9-1400t . 3.5GHz i7, 16gigs ram, beats audio on the mtoherboard. All updates installed on Windows 8.1 including the ones through the HP app.

By the way, the stuttering sounds kinda like a helicopter or something and it is continous and it goes on a regular rate unless I turn the sound way back up then the rate changes and it kinda makes the sound so dull and annoying
this is too bad cuz I paid much money in this machine because the speakers kick ass and now I cant party with it

Volume dipping in and out and sounds like its underwater when plugging my guitar amp in through iRig??

I've just got my first mac that I'm just getting used to, but I've been using garageband on my iPhone for about a year with no problems. I've tried recording my guitar on the mac using my iRig which is what I've been using before, and the sound is awful! The volume keeps going up and down and it sounds like its underwater, whereas it was clear as day on my phone. I've tried turning the compressor off and fiddling with different things but nothings working. I'd really appreciate the help if anybody knows what to do. Thanks

Oh, one other spot you might check for level control,
in the Track Info window there is a "volume" control.
This may or may not be enabled ... I kinda' think
for the Mac's Line-In it is enabled
Yes, it is enabled and directly linked to the input volume control in System Prefs. If you have both windows open, you can watch the slider in prefs move as you change the volume in Track Info.
BTW, increasing the various gain controls on my amp does alter the input volume. The change isn't huge, but it is noticeable.
thanks again.

Internet or any window displays keep zooming in and out and are highlighted in blue

has anyone had trouble with your, for example, safari window zooming out and being highlighted by blue? or you have two windows and they keep zooming out? I am not sure if I am using the correct terminology, but yea its really annoying! help thanks!

I will be typing in a password or chatting, and it goes bezerk on me...I dont know if it is a certain key I press or the trackpad?

Hp Pavilion dv7 Sound goes in and out and makes clicking noise

Similar Messages

Maybe you are looking for