HP Pavilion dv7t-4100 CTO Entertainment Notebook PC Hard Drive Replacement

Hello,
I have HP Pavilion dv7t-4100 CTO Entertainment Notebook PC and I had had hard drive issues from within warranty period. i.e. I purchase in 2010 and had a hard drive replaced in 2011 and again in 2012. Next time it failed in 2013 (almost 11 months apart on an average).
Last time when it failed, the warranty had expired so I thought of giving it a few try e.g. running thru bad sector fixing/writing-off softwares from seagate, Toshiba....this got me out of Smart Drive Error.
I have been using the HDD for sometime now but want to be prepared for the next round and I'm sure it'll be gone for good the next time.
Current HDD is 640GB, 7200 RPM Hardrive (replaced in 2012). HP Part# 621046-001.
When replacing, can I use ANY 640GB hard drive? Can I use a hard drive that is larger than 640 GB? Different RPM?
Any suggestions about hard drive?
The recovery discs I had received with the replacement drive did not work correctly. I had to use the first set I had created right after I purchased the laptop. 
Thank you.
--Pratik Patel
This question was solved.
View Solution.

Hi Pratik Patel
According to product manual:
Your system supports SATA 9.5mm or 12.5mm , 2.5" HDDs
supports upto 2 hard drives
supports SSD too.
Single hard drive configurations supported:
250GB, 320GB, 500GB @7200RPM @9.5mm
640GB @5400RPM @9.5mm
750GB, 1TB @5400RPM @12.5mm
160GB SSD
If you want dual hard drive configurations, please click following link (user manual):
http://h10032.www1.hp.com/ctg/Manual/c02666747.pdf
But, there is not hard fast rules that only 5400rpm can be used instead of 7200rpm, which was used to replace your earlier hdd.
hope this has helped you.
thanks
Visruth
**CLICK 'ACCEPT AS SOLUTION' TO HELP OTHERS WITH SAME PROBLEM**
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Similar Messages

  • HP Pavilion dv7t-3000 CTO Entertainment Notebook PC motherboard replacement

    Hi,
    I have an HP Pavilion dv7t-3000 CTO Entertainment Notebook PC with the black screen (of death) due to a known fault with the graphics chip. I have been trying to buy a replacement motherboard at an affordable price that does not have this problem. I have seen several HP Pavilion motherboards that look very similar to mine, but have a different part number. Can anyone tell me or recommend a replacement motherboard that is compatible with my laptop and hopefully does not have this known graphics chip problem. Thanks for your time and support.
    Regards
    rac373

    rac373 wrote:
    Hi,
    I have an HP Pavilion dv7t-3000 CTO Entertainment Notebook PC with the black screen (of death) due to a known fault with the graphics chip. I have been trying to buy a replacement motherboard at an affordable price that does not have this problem. I have seen several HP Pavilion motherboards that look very similar to mine, but have a different part number. Can anyone tell me or recommend a replacement motherboard that is compatible with my laptop and hopefully does not have this known graphics chip problem. Thanks for your time and support.
    Regards
    rac373
    We need the P/N to verify what board will fit in that laptop and also you can use that P/N from service manual to locate the part on eBay to find a match or call HP support to see what the board would cost.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • HP Pavilion dv7t-7000 CTO Entertainment Notebook PC - Upgrade Processor

    Hello,
    Any help would be appreciated.
    I have an HP Pavilion dv7t-7000 CTO Entertainment Notebook PC.  Because of a new job I need to update my processor from the current 2.30 GHz (see exact specs below, please) to at least 3.0 GHz.
    Is there a 3.0GHz processor out there that is compatible with this particular computer? I've called technical support and was told they don't know. I really don't know who else to ask.
    This computer was just purchased a few months ago (before I got the new job). I would really like to avoid purchasing a new computer, if at all possible, if I can upgrade the processor in this one.
    Here are the specs of the current processor:
    Intel Core i7 3610QM
    Code Name    Ivy Bridge
    Package    Socket 988B rPGA
    Technology    22nm
    Specification    Intel Core i7-3610QM CPU @ 2.30GHz
    Thanks in advance.
    This question was solved.
    View Solution.

    Well, there appears to be just one (that I've found) 3.0 GHz processor that Intel makes for my chipset  (HM77 Express Chipset) and it's the i7-3940XM Extreme edition (http://ark.intel.com/products/71096/)
    At a retail price of $1,000+ it looks like I'm going shopping for a new computer. 
    Not sure if anyone from HP read the peer forums, however, I will not be purchasing another HP product.
    This machine has had issues outside of me needing to upgrade the processor for my own personal reasons. Your support is grossly lacking in all areas Your techscannot even pull up the model number with the serial number.
    Customers should not have to go out on the Internet to research questions like this.

  • Hp dv7t 4100 cto entertainment notebook pc blu ray problem

     Hi i have a hp dv7t 4100 cto laptop .. i have windows 7 home premium os it read s all the disc i inserted..
    but when i insert a new empty disc it is not at all reading or responding.
    the same thing happens when i insert blu ray discs
    i cannot write in cd/ dvd s due to this problem as it is not reading empty discs
    i have cyber link power dvd and nero blu ray player
    but still no response for blu ray and empty discs
    what can i do now
    i have no HP service centres near by
    please solve my issue

    Hello velshankar,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your notebook is not able to read Blu-Ray discs or burn DVDs, and I would be happy to assist you in this endeavor!
    For burning software onto different media, I recommend following this document on CD or DVD Cannot Burn Discs (Windows 7). This resource should help enable your computer to burn software onto DVDs.
    In regards to reading Blu-Ray discs, I suggest following the steps in this resource on Resolving DVD and Blu-ray Movie Problems (Windows 7). This should help with reading your Blu-Ray movies on your notebook.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Connecting multiple monitors to my HP Pavilion dv7t-7000 CTO Entertainment Notebook

    I am trying to connect two Asus V-238H-P monitors to my laptop. I have had just one of the monitors in the past and got the second today. I connected the first one to my laptop with the VGA cable and it worked wonders. Now, since the HDMI and VGA ports are too close together on the notebook to use them simultaneously, I got a VicTsing USB 3.0 to VGA adapter to use for one and am using HDMI for the other. The problem is that the monitor connected to the adapter is not getting a signal. When I power on the monitor it says " NO VGA SIGNAL" and goes to sleep. The monitor connected to the HDMI is working fine.
    I don't know if the adapter is the problem or if the USB port is the problem. When I go into the Screen Resolution (Windows 7 64-Bit) window, it can detect the display on VGA but when I extend the desktop to the display, nothing happens. 
    Apologies for the paragraph, thanks in advance.

    Hi Seearter,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that when you connected 2 monitors, one with the HDMI connection ( works fine) and one with the USB adapter you are getting a no signal message on the USB connected one.  Here are two links I believe will assist you.
    Connecting a Monitor, Projector or TV (Windows 7)
    Using Two or More Monitors with One Computer in Windows 7
    Please do not hesitate to reply, if you would like further assistance. Please provide the results  of the troubleshooting.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Pavilion dv7t-4100 CTO Select Edition Entertainment Notebook PC hard disk failure imminent.

    Lately this laptop has been running slow and hot. Just yesterday,  I recieved an error message on my laptop (HP Pavilion dv7t-4100 CTO), saying "SMART Hard Disk Error" followed by a message telling me that the SMART hard disk check has detected an imminent failure. It told me to backup my files and then press F2 and run a hard disk test. The Quick Test Passed. The complete test gave this error.:"Hard Disk reporting failure 301 Disk Name: Toshiba MK7559GSXP Volume C:/D:/F:/)". I am sure I will have to replace the hard disk. Right now it is a Toshiba 750GB SATA hard disk drive, 5400 RPM, 2.5 inch small form factor (SFF). Can this hard drive be replaced with a Hybrid SSHD like the following:
    Seagate Hybrid Drives ST1000LM014 1TB MLC/8GB 64MB Cache SATA 6.0Gb/s NCQ 2.5" Laptop SSHD 
    or
    TOSHIBA Hybrid Drives MQ01ABD100H 1TB+8GB(NAND Flash) 32MB Cache SATA 6.0Gb/s 2.5" Laptop SSHD
    If not, what would be the best replacement hard drive that you reccommend?

    Hi,
    You can put the second HDD on the second bay, existing BIOS can handle this BUT you need more hardware namely a caddy set (caddy & cables). You can buy from:
        http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=345
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My Recovery Drive is Full, How do I clean it up? (HP Pavilion dv7t-4100 CTO)

    Hi, I'm not too comfortable with messing around with the inner workings of my computer, but the Recovery Hard Disk Drive has been slowly filling up for a while now. It is just about full and I was wondering if there was any way for me to clean it up/restore it without messing up my programs and files? I did it once before, but I can't remember how and I'm too scared to mess with it without some kind of instruction.
    I have a USB hard drive for making back ups that I use now as a precaution if something goes wrong with cleaning the Recovery Disk.
    My computer is a HP Pavilion dv7t-4100 CTO Select Edition Entertainment Notebook PC running on  Windows 7.
    If someone could give me some advice, that would be wonderful.

    Hi,
    See the HP document on the following link regarding this issue - although the document refers o Vista, it also applies to Windows 7.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01508532&cc=us&dlc=en&lc=en
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Possible to connect an external monitor to HP Pavilion dv4t-4200 CTO Entertainment Notebook PC

    I have a HP Pavilion dv4t-4200 CTO Entertainment Notebook PC model # A1M02AV and it has a VGA port, one that looks like a phone/broadband cable port, and one that looks like a USB port but indented on either side at the bottom. Can I even connect an external monitor? How do I find out if I have more than 1 video card? Besides the usual USB/headphone ports, I don't have any other ports. It says my drivers are up to date...but I don't even know what I should be looking for. Do I need to install something or buy some sort of adapter? 
    I am trying to connect a Dell external montitor via the VGA port with a VGA cable. The monitor has power but my notebook does not recognize/detect it. However, when I first plugged it in, my notebook display shrank into a square (vs the whole screen) so it recognized something...but nothing happened on the external monitor. 
    I tried detecting it via my display settings, but  I accidentally changed some dispaly setting so that the home desktop only shows on monitor 1, but unselected my actual notebook display or something or changed it to be monitor 2 (even though monitor 1 does not exist), so when I plug the cable in to my notebook, all of a sudden my desktop goes away and it's a just a blank background screen - and I cannot access the computer display settings or anything.... when the cable is unplugged this setting looks normal, so I can't figure out how to fix it. 
    Sorry, I have no idea what I'm doing here - please help! 
    This question was solved.
    View Solution.

    Hi,
    All Dell monitors come with CD's for drivers. Your laptop may not know the monitor w/o its driver, it won't install automatically. Please check:
    Ringht click a blank space on desktop,
    Click Personalize
    Click Display
    Click Change display settings
    Can you see BOTH laptop screen and external monitor in there as shown on the following image:
    For testing, I put my Dell monitor is my main display. If I can't see 2 monitor, you need its driver first and then check the cable.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Quickweb software upgrade for HP Pavilion dv6t-3000 CTO Entertainment Notebook PC Drivers

    Hi
    I have purchased my laptop in the year 2010 from HP. Now i need to upgrade HP QuickWeb software .
    My current version is less than 1.0. I guess we have latest version as 3 or above..
    Please let me know how to update the software to version 3 or greater.
    Here is my laptop model
    HP Pavilion dv6t-3000 CTO Entertainment Notebook PC
    Product name: HP Pavilion dv6 Notebook PC
    Windows 7 Home Premium 64-bit Service Pack 1

    Hello @SridharGaddam,
    I understand that you are looking for an upgraded version of HP Quickweb for your HP Pavilion dv6t-3000 CTO Notebook PC. I am providing you with a link to the HP Pavilion dv6t-3000 CTO Entertainment Notebook PC Drivers, which has all the most current drivers and software available for your computer. This is the software that HP has updated for your computer, and if you do not see the software you are looking for that means it is not compatible with your computer.
    I hope this answers your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • HD Replacement for HP Pavilion dm1z-3000 CTO Entertainment Notebook PC

    Hello.
    I have a HP Pavilion dm1z-3000 CTO Entertainment Notebook PC , Product Number:   XL303AV
    I am having SMART HD monitor failure mensage at startup and the computer is very slow.
    I just bought a OCZ Vertex V3 SSD 256mb and i want to create a recovery media but the recovery media creation in my computer is not working.
    I did a backup of my files and a complete recovery from the F11 at startup.
    The Notebook is runnig good, but the SMART screen reporting failure keeps appearing and windows is poping up HD failure alert.
    The recovery media creation keeps not working (32GB USB drive), the formating step do not end never. I already tryied with another USB pendrive and no sucess.
    The recovery partition is there. How to create a recovery media for my new SSD HD ?
    Other problem:
    I tryied to order the recovery media at HP site but i have a USA buyed notebook and i live in Brazil, and it is impossible to order that for shipping to Brazil (stupid). HP Brazil do not recognize my serial and produt number, sending me to USA site.
    My windows 7 is the 64bits Home Premium.
    Help me
    Regards
    Cristiano

    Hi,
    If the impending failure alert from the HD SMART is popping up, then creating USB  from the original hard disk at this point is not likely to be successful.
    You can try copying the recovery partition to an external drive in order to keep it.  Use the OCZTechnology forum as a source for how to initially setup the SSD drive. I have a Vertex 3 SSD in this particular desktop PC and I love the performance it provides.
    What was the size of the original hard disk?
    I highly recommend that you use the Porutgese language HP Consumer support forum if you are familiar with the language. There are experts there who are quite likely to be familiar with the problem you are facing with in acquiring the recovery disk set.  I met some of them last March in San Francisco at the HP Social Summit.
    All you need to do to access the Portugese language HP Global forum is change the language tab at the upper right where it says English to Portugese.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • HP Pavilion dv4t-1000 CTO Entertainment Notebook PC

    I was gifted this HP Pavilion dv4t-1000 CTO Entertainment Notebook PC laptop in October 2008 which was purchased in US. I am residing in India. In the first 6 months, the keyboard started having problems. I took this laptop to the HP service center in Bangalore, India which told me that this model is not supported in India. (Product Code # KH600AV)
    Somehow I managed to send this back to US for repairing which got repaired under warranty.
    Now my laptop is not rebooting. There seems to be some issue with the motherboard.
    So far, HP Service Center in India is denying that it is not supported in India. Is there anyone who have come across situation.
    Please let me know.
    -Regards
    Rahul Kshirsagar

    The maximum memory supported by this notebook is 8192MB(8GB). Your notebook as 2 memory slots hence you need to get two 4GB modules each in order to upgrade it.
    You can verify this information over here
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • HP Pavilion DV7T‐4100 CTO USB 3

    I have a 
    HP Pavilion
    DV7T‐4100 CTO 
    and it appears that is does not have any usb3 ports.
    I just bought a usb3/sata hd caddy.
    Now my questions is will the usb 2 ports put out enought "juice" to run the usb 3 caddy which has only one usb connections and no external power supply?
    I know that my HP Pavilion DV7T‐4100 CTO has a combo usb2/firewire port and I'm wondering if I pug my usb3 caddy into it will it power up the HD?
    I belive that usb3 is downwardly compatable with usb2.  So if the connection has enought "juice" will it run the HD?
    Thanks
    rafalovich

    Hi rafalovich,
    You are correct, that USB 3.0 is backwards compatible with USB 2.0. There are plenty of USB 2.0 SATA Docks, so it should provide enough power, but the transfer rates would be at 2.0 USB speeds.
    Hope this helps.
    I worked on behalf of HP

  • HP Pavilion DV6t-3100 CTO Entertainment Notebook PC - Upgrade hard drive to SSD and windows 8?

    I want to upgrade my hard drive (WDC WD6400BEVT-60A0RT0) to SSD for faster performance AND upgrade to Windows 8. How should I proceed? Which should come first?
    I am not very knowledgeable about these things, but I have changed hard drives before -- never an SSD though. Never had BIOS problems in these changes, so never bothered with it either. No experience about that. I am practically illiterate about that part.
    What should I be careful about? Any SSD drive would work? Would BIOS (F.29) and motherboard (144A 65.38) be relevant? How should I choose my new SSD?
    Do I absolutely need to clone C: drive? Could I not install windows 8 fresh/anew? What problems may I have with a new SSD? 
    In short -- what would be the best and least problematic way to do this?
    I will back up my audio, video and office files. All copy-paste stuff. I have no problem with installing all my programs from scratch.
    I couldn't find a specific thread that provides a comprehensive answer so I opened this thread. 
    Thanks.

    It should be pretty simple _ remove the battery and adapter _ install your SSD _ hold down the power button for 1 full minute.
     Eject the DVD tray with the manual eject hole using a bent out paper clip.
     Load you W8 disc _ close the tray and plug in the adapter.
     Boot up, it should just boot to the W8 disc, if it doesn't there will be a quick flash on the screen when to press the esc key, after that you choose f9 (with out checking) and tell the BIOS to boot from the CD/DVD ROM.
     (the W8 disc will format the drive automatically)
     Get the newest SSD you can find, don't buy old junk from eBay _ always buy from a reputable dealer.
     I have Samsung SSD in my dv8 and has no problems, my old dv7 has an Intel SSD and it's been good too _ no problems. Stay away from bargain deals with obscure brand names.
     There are no official drivers posted for your machine for W8, so you can/will have to use the generic ones, but some times the HP OEM W7 drivers will work.
     Start with you Chipset driver first _ I think it's Intel _ there are no specs listed as your's is a CTO model.
     Get the Chipset driver direct from Intel _ they may have updated their auto driver finder to scan in a W8 environment.
     Install the rest of the drivers in any order. You can also use Windows update to find the drivers as well, it's up to you.
     Be aware that some things may not work in W8, like you finger print reader.
     The SSD will behave exactly the same as a standard drive, the only difference is that it will run faster.

  • Drivers for HP Pavilion dv4t-1400 CTO Entertainment Notebook PC

    Hi,I am using my hp pavilion dv 4 1400.its oprating system was windows vista and it is upgraded to windows 7 and  now is windows 8.i feel windows 7 is convenient for me and tried to install windows 7.but it need drivers.how can i find / download these drivers.can any one help me.thank youprasad.

    https://driverscollection.com/?V=HP&S=43&hpage=207 

  • HP Pavilion dv6t-2000 CTO Entertainment Notebook - no audio

    Did diagnostics on the audio and that says everything is working.  Reinstalled the audio driver. Also restored the notebook to an earlier date.  Nothing has worked so far.  Any help would be greatly appreciated.

    I searched google for one, I cannot find any for sale, ebay only showed parts for that model.

Maybe you are looking for

  • No Messages in Inbox - Backup

    Odd problem. I got my (2nd - 1st one died) Time Capsule about a month and a half ago. Shoulda checked before I guess but tonight I needed to retrieve a Mail email from earlier today. There were 14 message all from Feb. 27, 2010 and no other inbox mes

  • Viewing Direct Deposits made to vendors

    Currently we can view when checks have been issued to a vendor. We can see what the check number is, when it was issued and when it was cleared. We can not find a transaction to show when a Direct Deposit was made to a Vendor. I am talking about the

  • Using todays date to group data

    I have a cross tab report which shows totals for the past five financial years.  A financial year for us goes from 1st April to 31st March.  At the moment I am using specified order and have defined five groups with date parameters.  When we get to A

  • DTW: error "Duplicate bin locations have been removed - error id 1470000307"

    Hi, When attempting to import inventory data, using the DTW business object "Inventory Transfer" and using the templates "Transfer", "TransferLines", "StockTransferLinesBinAllocations",  "BatcheNumbers" and "SerialNumbers", the following error messag

  • Unable to backup iphone 4 to computer using itunes

    I have the most up to date software for both the iphone4 and itunes, and while itunes recognized and connects fine to my iphone, a backup does nothing. For example I click to start a backup, and in the upper center it says "Backing up Bob's iphone...