HP PAVILION DV8000 - BOSTON ACOUSTICS BA 735 - NOT WORKING - HELP

I cant seem to get these Boston acoustics ba735 speakers working with my:
HP Pavilion dv8000
Conextant HD sound card
Windows XP Media Center edition SP 3.
help

Hi,
You should see the following cluster at the back:
Back I/O ports
Figure 8: Back I/O ports
1 - Optical S/PDIF-out port
2 - LAN
3 - USB 2.0: 2
4 - USB 3.0: 2
5 - DVI-D
6 - DVI-I
7 - Audio: center/subwoofer
8 - Audio: rear speaker out
9 - Audio: side speaker out
10 - Audio: Line in
11 - Audio: Line out
12 - Audio: Microphone
The BA 735 speakers are digital, please use the following setup:
   http://www.ehow.com/how_5412465_connect-boston-acoustics-ba-speakers.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Hp pavilion dv6-3151sf built-in speaker not working

    Need help on hp pavilion dv6-3151sf built in speakers not working but can hear sound using the headphone. Is there a service manual on how to replace or check the speakers?

    Hi there @JINGDOMS 
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    In answer to your question about the service manual, there sure is, and I am happy to help you with this.
    You can find it on the support page for your model, or just use this link: HP Pavilion dv6 Entertainment PC - Maintenance and Service Guide.
    Within the service guide you will find the replacement instructions for the individual assemblies, and also the part numbers.  I would start with just checking the connection to make sure it is good, and if there is still no sound from the speakers, you can also try this page as well, before replacing the part.
    No Sound from the Speakers (Windows 7)
    If you determine that is a faulty speaker and you want to get replacement parts, take a took at this page:
    HP Notebook PCs - Ordering HP Certified Replacement Parts
    Let me know if you need any further assistance.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • HP pavilion dv6 microphone not working . help please . . .

    HP pavilion dv6 microphone not working . help please . . .

    Hi,
    DV6 is a series of hundreads of models, what is yours ? To help us answer question quicker, please read this:
       http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
    You may wat to try this first:
    1. Right click speaker icon (right hand corner)
    2. Select Microphone devices
    3. Right click Microphone
    4. Enable it
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hi, my Hp Pavilion lap, keyboard and mouse is not working

    Hi, my Hp Pavilion lap, keyboard and mouse is not working while  i am login into  windows 8.1. but it works in bois mode. can you please tell me the reason 

    Hi there,
    I had the same problem so did some research. Downloaded this driver and now everything's sweet. Hope it works for you too!! (This is only to get your hdmi working, sorry can't help you with the rest)
    http://www.nvidia.co.in/object/Quadro_3D_Vision_US​Bdriver_197.03_in.html

  • HP Pavilion 15-e092se Notebook PC keyboard not working

    HP Pavilion 15-e092se Notebook PC keyboard not working . win 8.1.

    Hi Nits007,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion 15-e092se Notebook and keyboard issues. Here is a link to uninstall the keyboard. Restart the computer after uninstalling, it should reinstall automatically.
    Hope this helps you.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

    After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

    Hi,
    the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support  (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

  • When i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE

    when i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

    Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

    It all depends on the codec the file uses, Karli.
    What model of camcorder is this video coming from?
    Are you working on a Mac or a PC? Have you got the latest version of Quicktime, per the program requirements? When you started your project, did you select the settings for a DSLR at 720p? This is a vital step since it will activate the components your computer will need to work with many of these types of files.
    BY THE WAY, KARLI--
    PLEASE do not post the same question more than once on this forum! You've already got a thread going with this same question and several responses posted. It's very confusing when you post the same question a second time and start a whole new discussion.

  • My MacBook Air won't turn on? I have to dropped it but earlier in the day I got a notification about a full single drive. I have tried the ideas in the communities but its still not working, help!

    My MacBook Air won't turn on? I have to dropped it but earlier in the day I got a notification about a full single drive. I have tried the ideas in the communities but its still not working, help!

    See this article:
    http://support.apple.com/kb/ht3964
    Find the section that applies to your computer, and follow the instructions.
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

  • I cant open my ipad after i turned on the voice in accessibility i have a passcode and i tried to enter my password but it not working. help me please

    i cant open my ipad after i turned on the voice in accessibility i have a passcode and i tried to enter my password but it not working. help me please..
    i updated my ipad in ios 6

    Turn off VoiceOver
    1. Press the Home button
    2. Tap Settings.
    3. Then double-tap Settings.
    4. Tap General.
    5. Then double-tap General.
    6. Use three fingers on the screen to scroll to Accessibility
    7. Tap Accessibility.
    8. Then double-tap Accessibility
    9. Tap VoiceOver
    10. Then double-tap VoiceOver.
    11. Tap "On" next to VoiceOver
    12. Then double-tap "On" to turn it off.

  • Lower volume button control not working help?

    Lower volume button control not working help?

    If you only restored from backup, restore to factory defaults/new iPod.  If you then still have the problem it is likely a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • After update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please

    after update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • On my iPhone 5 camera photographed not clear. blurry pictures, autofocus does not work. help please!

    on my iPhone 5 camera photographed not clear. blurry pictures, autofocus does not work. help please!

    Could you please describe how you are trying to delete a single text message and it will not work? What are you seeing in place of the trash can icon?

  • HT201210 I can not restore my iPhone 4S itunes error says I have 29 and I put it in DFU mode and not working help please

    Hello

    I can not restore my iPhone 4S itunes error says I have 29 and I put it in DFU mode and not working help please

  • TS2755 When trying to open my mail, it opens then closes immediately, I've deleted the account and re-created it 3 times and also done a reset but still not working, help please

    When trying to open my mail, it opens then closes immediately, I've deleted the account and re-created it 3 times and also done a reset but still not working, help please

    Try closing all apps in Multitask Window
    1. Double tap the home button to bring up the multi-tasking view
    2. Swipe up on the screenshot of the app you want to exit.
    3. The app will fly off the screen

Maybe you are looking for

  • My Macbook Pro keeps restarting out of the blue

    It's been doing it for a couple of weeks already. As far as I can tell, its very random. It happens at any time, ive tried to see if its a specific program, but it restarts at random times. I did an SMC reset and that didn't do anything. Lastly, i wi

  • SQL LOADER / INFILE filename as variable in .ctl file

    I stumbled over several threads in the OTN-forums regarding this problem, but neither was it finaly solved nor did I find a FAQ that answered my question. Soooo: We get several datafiles from several sources and process them via SQL Loader and store

  • What is it that resets the Music Location when iTunes starts?

    So whenever you have your Music Location set to a mount on a remote device. Such as a share on a Time Capsule for instance if the mount isn't present when iTunes starts iTunes will always reset the Music Location back to it's default. Is there a way

  • Interconnects on LDOMs with SC3.3

    Hello @all, a question how to set up interconnects with LDOMs and SC3.3: We have two T4-1 and want to set up 2 LDOMs on each ( ldom1 and ldom2 ). Each LDOM should become a cluster Cluster1: ldom1 on 1st T4-1 and ldom1 on 2nd T4-1 Cluster2: ldom2 on 1

  • Outlook 2010 SP2 - Error when editing shared calendar: Post Exchange 2013 CU2 Migration

    Hi there, I have a strange comportment with Outlook 2010 SP2 and Exchange 2013 CU2 and i really need your help. Frequently, when an user (who has the good permissions for) want to edit a shared calendar (edit a meeting or add one), he has this error