HP Pavilion dv8210us sound card doesn't work.

Computer p/n ET831UA#ABA came with WIN XP Home Edition. Label states designed for Windows XP, Windows Vista Capable. I formatted the harddrive and loaded Windows Vista Business 64 bit. I downloaded and installed all drivers that were recommended by HP but my Sound and Audio doesn't work. Neither does my Mass Storage Controller nor my PCI Modem. All were working with the WIN XP. Need help on how to getting everything working.
This question was solved.
View Solution.

You're very welcome.
You enjoy the rest of your weekend too!

Similar Messages

Audio capture (recording) from sound card doesn't work

I have a Asus Xonar DS sound card that uses CMI8788 chip, AV200 kernel driver and snd-virtuoso kernel module. The card is recognised on installation (i686) and there are no issues with the sound output.
This is a new installation to try to fix the (lack of) recording problem. I know the card can be used to capture sound being played from a web browser, Youtube and internet radio, as I previously had it working with audacity, gnome-recorder and mhwaveedit, but some months ago, after an upgrade it stopped working.
Alsamixer shows the card as AV200 and I have toggled all the capture options and raised levels to no avail.
The card is not broken as the capture works fine on Kubuntu and even Win7. I have tried pasting asound.state from Kubuntu but there was no diference.
Does anybody know a good troubleshooting guide that deals with the capture side, not output.

"volume: can't open /dev/mixer " is for the users who use OSS so there; you should find out what uses OSS and change it if it is possible and not solely on oss.
and the error I am having is because I defined the specific software to hwd:0,0. so what i should do is to check my softwares and set the audio output to "default"
So in another word use you sound card and in output option of your sound card choose "default over hwd:0,0"

Sound card doesn't work properly (HDA intel)

I had a fresh install and now i have this problems:
@ Starting volwheel i get "volume: can't open /dev/mixer "
@ I can not play two or more media to gather. if i play more than one media to gather the second one and the one after plays in mute. only the first one has the sound.
@ alsaconf doesn't found any sound card.
->> the more information about my sound card
lsof /dev/snd/*
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /root/.gvfs
Output information may be incomplete.
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
vlc 25922 amin mem CHR 116,3 5495 /dev/snd/pcmC0D0p
vlc 25922 amin 13u CHR 116,3 0t0 5495 /dev/snd/pcmC0D0p
fuser /dev/snd/*
/dev/snd/pcmC0D0p: 25922m
8086293e Yes Intel Corporation 82801I (ICH9 Family) HD Audio Controller snd-hda-intel (appropriate driver)
and I also installed alsa-oss b ut i removed it.
I need help.
Last edited by krax (2011-08-30 13:28:48)

"volume: can't open /dev/mixer " is for the users who use OSS so there; you should find out what uses OSS and change it if it is possible and not solely on oss.
and the error I am having is because I defined the specific software to hwd:0,0. so what i should do is to check my softwares and set the audio output to "default"
So in another word use you sound card and in output option of your sound card choose "default over hwd:0,0"

HP Probook 4520s: sound card doesn't work (no sound, red mute button)

Нello!
I have an issue with my HP Probook 4520s. Its internal speakers and microphone doesn't work. I've tried to install and reinstall drivers from here, tried to rollback driver to older version but I always have the same result: installed the IDT sound codec, and after a restart, the mute button turned red and I cannot switch it.
Soundcard device ID: HDAUDIO\FUNK_01&VEN_111&DEV_7605
OS: Windows 7 Professional x86
How can I fix it?

Hi, just registered to post my solution. I got HP ProBook 4330s in for repair. Problem: some sticky liquid spilled all over and no sound. Also discovered that no microphone as well, but webcam did work just fine.
What I tried:
1) Installed fresh Win 7 Ultimate 32-bit and all official drivers (audio driver did not want to install), still no sound. Sound icon shows red cross. Message: No audio output device installed.
1) Installed the newest version of BIOS, in my case F.40, still no sound.
2) Pluged in headphones, still no sound.
3) Took apart, unpluged and firmly inserted every possbile cable, still no sound.
4) Found in BIOS everything that relates to Audio. Made sure Audio device is enable, still no sound.
5) Install XP and installed XP sound driver, still no sound. In fact, that driver did not install correctly, showed some kind of error.
What did work, in consecutive order:
1) Took apart again and took out the coin battery that retains the BIOS data, date, clock etc.
2) Put everything back together, switched on, entered the correct date in BIOS settings, and started Win 7 Ultimate. Still no sound. But I noticed that Win 7 Ultimate has found some devices and was installing drivers for it. Though did not check exactly which ones.
3) If I could not get the sound working I was determined to buy some speakers with USB connection. Then, I remembered that I already had a set of speakers for another laptop. These speakers had USB connection to draw power from and a grean standard headphone connection/plug to draw audio signal. I plugged in these speakers into HP 4330s and the sound started coming from these external speakers. The sound icon next to the clock in bottom right corner switched to normal mode and I could control volume with my mouse. Then I unpluged external USB speakers and the sound started coming from the HP's built in speakers.
Checked with Device Manager that correct sound drivers are installed and microhpone appeared to be installed as well. Though did not check with Skype if microhpone was working.
I was soooo happy!!! I struggled with this problem for three long days, searched many forums (none gave solution), tried everything with drivers, took apart the laptop some three or four times (now I learned to do it with my eyes closed, so to speak).
I started to think that taking out the BIOS/date coin battery did the trick. There must be some glitch in BIOS to motherboard connection in these HP ProBook laptops, and all BIOS settings need to be reset.
I'll be happy if this helps someone.

Satellite A110-195 PSAB0E - sound card has stopped working

Hello,
My sound card has stopped working it was working fine but suddenly the sound quality started to faint and finally it stopped working i have tried the following methods:
Realtek is default audio
Control Panel/ Sound & Audio Devices/ Audio tab/ Sound Playback click on down arrow and check that the correct audio is selected. Typically the problem will be they something like "modem line 0 playback" might have been substituted for the proper audio device.( Didn't Worked)
Chipset Utility - install ( Did'n't Worked Aswell)
Start / Control Panel / Administrative Tools / Component Services / a separate window will open in left pane click Services(Local) from the tree / Scroll down to Windows Audio service / if the service is Disabled or Manual right click > select Properties > under Startup Type change to Automatic > click Apply / click Start > OK Reboot. (Worked) But First The Quality Was Not As It Was Before And Then Sound Card Stopped Working Again.
Try a System File Check
go to Run - type "sfc /scannow" No Success.
I have installed windows again but no success. :(
Here Is The Detailed Model No. Satellite A110-195
PSAB0E-00F00KAR
Windows XP Home Edition SP2

No It Appears In Device Manager And In Control Panel.
This Method Worked But The Sound Level Was Not As Good As it Used To Be:
tart / Control Panel / Administrative Tools / Component Services / a separate window will open in left pane click Services(Local) from the tree / Scroll down to Windows Audio service / if the service is Disabled or Manual right click > select Properties > under Startup Type change to Automatic > click Apply / click Start > OK Reboot.

P20-552: 2GB SD card doesn't work.

I have a P20-552 (PSP26E-025E9-S4) which is about 18 months old. I recently bought a Canon digital camera (IxUS 750) with a 2GB Sandisk Ultra II SD card and the combination is working well. Although I can transfer images from the camera to my Toshiba portable using an USB cable, sometimes I would like to use the SD slot on the portable but there seems to be a problem: seconds after pressing home the SD card in the slot I get the message "Disk is not formatted - Do you want to format it now?". I reply OK but then I get the message "The disk in drive E cannot be formatted"
The card continues to work perfectly well in both my camera and in my iPaq PocketPC. The SD card slot in the Toshiba will work quite happily with the Sandisk 256MB SD card that is usually in my PDA.
Anybody has any idea why the 2GB card doesn't work in the Toshiba? Is it a question of updating a driver - I did look the other day but I couldn't find anything that to me seemed appropriate but I might well have overlooked something..
I am running XP Home (SP2) and have fully automatic updates ON. I have Norton Virus and Zone Alarm running and am not experiencing any problems with any other software/applications - at least, no problem since someone suggested vacuuming my overheating laptop a few weeks ago ;-)
Thanks, Brian.

It seems that the unit doesnt support this card.
Check your user manual. There you will find a information that this unit supports only the following SD card sizes: 8/16/32/64/128/256 and 512 MB
According to this document the 2 GB are to high.

Ethernet card doesn't work with new arch install?

Hi guys,
so this is kinda my first post, not that I'm new to arch i just never had an issue i couldn't figure out on my own... But i love arch i have been using it for about a year now and have had no serious problems except for this. I have had arch running on an older dell vostro 200 desktop before i reinstalled with a vary similar issue except that the fix i came up with doesn't work anymore. I will tell you about the first issue first because i ALMOST posted on here about it originally but i figured out a way to make it work even though it was a hassle.
After cold/rebooting my computer the network card doesn't work at all. lspci reported that the kernel module e1000e was the correct one (i have verified this) and that the kernel has loaded it, i verified that with dmesg but still it wouldn't work. After much much anguish and hairpulling, I realized that it had to have something to do with the module so i tried forcing it to reload with rmmod e1000e and modprobe e1000e and it still wouldn't work until i physically unpluged the ethernet cord and pluged it back in until the light on the NIC turned on. After that everything works as normal i could even unplug and plug it back in with no problems. So eventually i wrote a script that did this for me (except for the uplugging and plugging part) and i used that when i cold/rebooted.
But now i have the exact same issue after reinstalling arch to the T except for the fact that the (crazy) fix i came up with doesn't work now. I used my "fix" after booting from the arch cd and it worked just like it always has. And now after rebooting into my fresh system the fix doesn't work anymore. So now i'm back where i was to begin with but i have no idea what to try next. I didn't do anything particularly different during installation except i added a udev rule for the e1000e module just to see if somehow that would fix the problem... it didnt and i have since deleted that (to see if it was the problem). The only other thing that is different is the root and home are now btrfs partitions instead of ext4.
I have booted several other live cds and dvds (diferent distros) including arch derivatives such as manjaro and they all worked just fine, using the same kernel module (e1000e). I'm not sure what that could mean but i know that it means there is a fix for this some way or another. I am going to hook up a wifi adapter and connect that computer to the internet to put some more information up if it's needed (asked for) but for now lspci -vnn | grep -i -A 10 net reports
00:19.0 Ethernet controller [0200]: Intel Corporation 82562V-2 10/100 Network Connection [8086:10c0] (rev 02)
Subsystem: Dell Device 0238
Flags: bus master, fast devsel, latency 0, IRQ 42
Memory at fdfc0000 (32-bit non-prefetchable) [size=128k]
Memory at fdfff000 (32-bit non-prefetchable) [size=4k]
I/0 ports at ff00 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] Vendor Specific Information: Len=06 <?>
Kernel driver in use: e1000e
Kernel modules: e1000e
ip a reports:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: enp0s25: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:1d:09:8c:36:f6 brd ff:ff:ff:ff:ff:ff
4: wlp0s29f7u3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 64:66:b3:16:92:10 brd ff:ff:ff:ff:ff:ff
inet 172.16.1.55/16 brd 172.16.255.255 scope global wlp0s29f7u3
valid_lft forever preferred_lft forever
inet6 fe80::6666:b3ff:fe16:9210/64 scope link
valid_lft forever preferred_lft forever
lsmod | grep e1000e
e1000e 215644 0
ptp 17692 1 e1000e
any help on what to do next would be greatly appreciated.
Last edited by mvheart/dev/null (2014-08-18 04:02:12)

Sorry I was thinking that it was say "state up" after that, I was looking in the wrong place... It's been a long time since I was playing around with this. So it is as i thought it was before?
[aaron@arch-box Arch-Linux]$ sudo systemctl start [email protected]
[sudo] password for aaron:
Job for [email protected] failed. See 'systemctl status [email protected]' and 'journalctl -xn' for details.
[aaron@arch-box Arch-Linux]$ systemctl status -l [email protected]
● [email protected] - dhcpcd on enp0s25
Loaded: loaded (/usr/lib/systemd/system/[email protected]; disabled)
Active: failed (Result: exit-code) since Mon 2014-08-18 11:20:29 EDT; 4min 11s ago
Process: 17650 ExecStart=/usr/bin/dhcpcd -q -w %I (code=exited, status=1/FAILURE)
Aug 18 11:19:59 arch-box dhcpcd[17650]: version 6.4.3 starting
Aug 18 11:19:59 arch-box dhcpcd[17650]: enp0s25: adding address fe80::ae3:ee04:7099:77c5
Aug 18 11:19:59 arch-box systemd[1]: Starting dhcpcd on enp0s25...
Aug 18 11:19:59 arch-box dhcpcd[17650]: enp0s25: waiting for carrier
Aug 18 11:20:29 arch-box systemd[1]: [email protected]: control process exited, code=exited status=1
Aug 18 11:20:29 arch-box systemd[1]: Failed to start dhcpcd on enp0s25.
Aug 18 11:20:29 arch-box systemd[1]: Unit [email protected] entered failed state.
Last edited by mvheart/dev/null (2014-08-18 15:50:10)

My Card doesn't work anymore and keeps asking me for the card information. How do I turn the card option back to "none".

How do I turn this off? I can't download anything until I put in the card's information. But the card doesn't work anymore, it ran out of money. It keeps saying that my last perchase was unseccessful or something. I just want this to stop so I can update and download apps! Please help!

My iMac with Snow Leopard 10.6.8 crahed b/c the HD cannot be repaired. I reinstalled Mac OS X and luckily have most documents and applications. I have moved them all into folders before I erase the HD. I had all my documents but lost the 3 applications for iWorks. It says go to the store, buy and enter your serial#. That is not working. Here it is:MB966Z/A
WVL 001299 10959191-000
I need the updates. Apple has my sign in Apple ID.
Thanks,
pandaposyus

I cannot get any sound..it says my sound card is not working properly...how do i fix this.

HP PC 2000 notebook, windows 7 operating system
can't get any sound..says the sound card is not working..how can i fix this...

You need to contact Adobe for you billing problem this is a user four not adobe customer support.
For your Photoshop Problems this user community may be helpful.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Need a new sound card for (( PC Works LX520

Hey mates ,
I need a new powerful sound card for PC Works LX520 Speakers
I need the best compatible sound card for this speakers .
I'm using the speakers for Trance , hard rock , games
Please pick me a special sound card , But not expensi've .
regards ,
I-IEMA

Preferably you would use a n AGP based graphics card as your radeon 9600 is. The PCI-x slots have lower bandwidth and would be slower.
Possible Upgrades
Radeon 9800pro
Radeon 9800XT
Radeon X800XT
Radeon X850XT
nVidia 6800GS/GT
nVidia 7800
All of which are in demand and short supply at present due to the new RoHS recycling requirements.

What do you do went your iTunes redeem card doesn't work ?, What do you do went your iTunes redeem card doesn't work ?

What do you do went your iTunes redeem card doesn't work ?, What do you do went your iTunes redeem card doesn't work ?

Welcome to the Apple Community.
The following article(s) may help you.
iTunes Card and Gift Certificate FAQ

Why my nano cut sim card doesn't work on iphone 5c?

why my nano cut sim card doesn't work on iphone 5c?

Cut cards often don't work. Get a real nano SIM from your cell carrier.
Regards.

HP updated my BIOS and now the sound system doesn't work on Dv76012Tx.

HP Care / Support Assistant requested to update my BIOS, which I did. Computer restarted a couple of times then I found my sound system doesn't work. My computer is Dv7-6012Tx and it is just a week old. I now get no sound, and it had been working beautifully.
Please reset my BIOS back to how it was.

Had the same problem as of about 30 minutes ago. New BIOS update, sound doesn't work. Drivers all read as up-to-date. What the hell?

XP Sound driver doesn't work on a Satellite A100-02B

Hello,
I've installed Windows XP on my Satellite A100-02B.
But the Sound Driver from Toshiba Download Site doesn't work.
The installation works without any errors, but Windows doesn't find a sound card and I can't hear anything.
Can you help me?
Thanks,
Matze92

Man, thats great that you found your solution. So I had suggested to check www.realtek.com for some working drivers. ;-)
Have phun and nice weekend
marina

Pavilion dv6 sound card

Hi support,
I have a question regarding my sound card embedded on my notebook Pavilion DV6-2140el.
Could you please give me more details about the technical specifications of the sound card?
I would have also the model of the chipset. I am interested mostly on the output dB power of sound.
Thank you

Hello, @nicunicu
Welcome to the HP Forums.
I see that you're looking for some information on components in your notebook. I will try to help you on this.
Most of this information is actually on the computer. You can use the Device Manager to find out a lot on each component. This may help you on how: What if Product Specifications For Your Notebook Are Not Available On The Web? - use the section on "Find specification using Windows Device Manager".
You may also find some information on those in the Maintenance and Service Guide.
I hope this helped.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

HP Pavilion dv8210us sound card doesn't work.

Similar Messages

Maybe you are looking for