HP Pavilion DVD-3013eo recovery problem with dvd`s Win 7 x64

Hi, i have a problem with my dv7-3013eo pavilion, recovery dvd just wont work, they are original but here's the problem:
in recovery pavilion says something like this on start recovery program is not compatible of this version of windows, but it proceed, then it Boot's then the installation stars and then uiadump32exe crashes, and pavilion says start recovery again? that shall i do?
My windows version is WIndows 7 x64 Home, and computer is broken. dvd are fine and this is first time i have to use them.

Hi:
I don't have an answer for you, but I have a workaround if you can't get the recovery disks to work.
You will only have the option of installing the English, French or Spanish version of W7 Home Premium 64 bit.
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to DVD's for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Now, instead of burning these to a DVD, use the Windows 7 USB flash drive installation tool available at the link below and follow the instructions on the page to install.
You will need a 4 GB flash drive or larger.
http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool
Paul

Similar Messages

Problems with DVD Player 3.0.1 in G4/466

Problems with DVD Player in G4/466
Yes, I've a g4/466 with two disks. In the first there's system 9.2.2 and the DVD player goes perfect. In the second I've system 10.2 and the 9.2, and the DVD Player (3.0.1) on the system 10 begins to jump in the dock, but stop and nothing happens, I can't open it...
There's any way to reinstal it form system disks???
Or any download to check the error?
Thanks

1. Try using Pacifist to extract it from your Mac OS X 10.2 installation disks, and then run the combo updater for your version of Mac OS X and any applicable DVD Player updates.
2. Open the Console application in the /Applications/Utilities/ folder and look for lines relating to the DVD Player.
(18543)

DVD Studio Pro - Problem with video size

Hello all,
I'm having a problem with dvd studio pro.
I have a project that I edited in FCP, then compressed to the default DVD setting in compresser, then imported the video as an asset in DVD studio pro. I'm trying to create a SD dvd, and whenever I simulate the dvd, the video plays with some of the left side cropped out. I have text that is cut off because of it. This has never happened before, and I have checked again and again to make sure its all set on SD. I'm pretty new to fcp studio, i'm teaching myself as I go and this is driving me crazy. I have made a bunch of dvd's prior, and this has never happened, so I have no idea what I did to mess things up.
For all I know, the problem may not even have to do with dvd studio, it may be in compresser. I have also played around with that, to no avail.
Thanks for the help!
Thomas

Thanks Javabob,
That is a way good idea. While trying your suggestion i stumbled upon the problem, I have no idea why i never noticed this before. When i got to the step of importing it as an asset into dvd studio, i clicked on the video track and the inspector box for it showed up, then i noticed it had a display mode drop down menu set on '16:9' pan-scan. I then changed it to 16:9 letter-box and the simulation video fits correctly onto the screen. I don't really understand the reason why pan-scan blew it up like that, but it is fixed now. I still don't recall ever having to do this before, but oh well. I will pay attention to the inspector window for the videos more carefully from now on.
Thanks for the help Javabob!

Has anybody had problems with DVD's burnt with Optiarc drive

I am burning movie DVD's through iDVD. The movie formats are initially QT with PCM sound encoding. They seem to work well on an old Samsung DVD player, but stutter on a brand new Samsung computer. I do understand it could be a problem with the newer computer, but I would like to hear if anyone else has had any problems so I can see if the problem is more widespread.
OPTIARC DVD RW AD-5630A:
Late 2007 20 inch Alloy iMac
Model: OPTIARC DVD RW AD-5630A
Revision: 1AHM
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Low Power Polling: Yes
Any help appreciated
Cheers
Mick

I too am having trouble playing DVDs burned with my Optiarc drive. Sorry I don't have the solution, but I can add a data point to the story about problems with DVDs burned with Optiarc.
My current hardware: mid-2007 24" iMac, built-in Optiarc DVD RW AD-5630A with firmware 1AHM / MMC-3.
My scenario: after making home movies with iMovie '08 and iDVD '08, I either burn to DVD (TDK 16x DVD-R 4.7 GB) straight from iDVD or I save as disc image from iDVD and then burn the disc image from Toast 9. In either scenario, I can play the DVD on my iMac or any other Mac or Windows computer. However, it will not play on my Xbox (original Xbox, not the 360) because it freezes when trying to mount (sometimes the Xbox will not recognize the disc as a DVD, and sometimes it will begin mounting the disc and then freeze before displaying the title menu).
Before I bought my new iMac, I had the same workflow on an older 2003 17" G4 iMac that has a Sony DVD burner, and those discs play fine on all DVD players including my Xbox. To test the hypothesis that something happened to my Xbox around the time that I upgraded to my mid-2007 24" iMac, I burned several DVDs using my older iMac, and they continue to mount and play fine on the Xbox. On both my older and newer iMac, I have Mac OS X 10.5 Leopard installed, same version of Toast 9, and I burn at the slowest speed (2x) on both. So it seems that the problem can be isolated to the Optiarc DVD burner, but I'm not sure if there are other factors at play here.
I searched the Optiarc site (www.sonynec-optiarc.com) but could not find a firmware update for the AD-5630A. However, I did find this site via Google:
Liggy's and Dee's modified NEC and Optiarc firmwares
http://liggydee.cdfreaks.com/page/en/Optiarc-AD-5630A/
Because I was not sure about the site's reputation or validity of the firmware, I have not tried it yet.

Problem with DVD Player

I inherited this computer and have spent the last couple of months upgrading it. Put a gig of ram in and added a PCI card to help with a multi screen setup but now I have hit my first major head ache. I bought a Pioneer DVR - 104 off of ebay and installed it no problem. The only issue is once I went to test out my dvd feature I found I had no DVD player. I tried updating the system but it would not install it. So I finally was able to get 3.1 off of this site and it won't start up. It just blinks on the dock once and dissapears. I checked the specs and this machine came with the superdrive but my father opted out of it, why I don't know, so there should be no issues with the hardware, can anyone help me on this?
867 mhz G4 Mac OS X (10.3.9) 1.25 GB RAM, 60 GB HD, 3 Monitor Display

Hi-
I'm sorry the extras is in OS 10.4- my mistake. In OS 10.3, I believe the DVD player is in the main package. I couldn't find it to install seperately. So.......
Let me recap-
1- The DVR reads install discs
2- DVD's won't play because DVD player does not run
3- DVD-R discs show no response
So-
1- The DVR is reading
2- The version of DVD player may not be compatible
3- There is no burn support
To check burn support, in System Profiler, check if under Burn Support "Yes" is showing.
My current thinking is, that since there was no DVR in the origional configuration, you may need to reinstall (Archive and install) the OS 10.3 to get the proper DVD player installed. this should also configure burn support.
The other way to get burn support is to use the patchburn that I gave you the link to.
BUT, I think you should do things one at a time. My advice is to first get the DVR to read, play and burn in that order. There is obviously a problem with DVD player, so, unless some else can advise differently, I would try the Archive and Install of the OS 10.3.
It may also be good to run the OS 10.3.9 Combined Update:
http://www.apple.com/support/downloads/macosxcombinedupdate1039.html
trying the combined update now wouldn't hurt. If it does not remedy the situation, try the Archive and Install, then update.
Best-
Chris
G4 AGP(450)Sawtooth Mac OS X (10.4.8) 2ghzPPC,1.62gbSDRAM, ATI9800, DVR-110D,(IntHD)120&160,LaCie160,23"Cinema Display

CS4 Design Premium Installation Problem with DVDs

Hey,
I just bought the student Edition of the CS4 Desgin premium package.
Have Windows XP SP3
Anyway I put in the first DVD...and it loads...and loads....and loads...like half an hour.
Nothing...cant open via explorer as well.
So I restart with Dvd in the drive. restart took a bit longer but now I can acces via explorer.
I start installation...works fine...put in Dvd2...works fine...Put in dvd3...loads...loads....loads...
just for fun I put in dvd"Content"....loads...loads....loads.
Ok so now I'm right in the middle of the installation...so cant just restart
(I did try later after aborting Installation: then I can read em like dvd1)
Now I have just installed half....with conent of dvd3-"content" missing
I tested 25 other dvds I had laying around...all starting within the sec I entered em, so dvd drive seems fine.
Cant remember how see specs at moment...but lets just say I can play "Crysis" on High smoothly
It would maybe work if I could somehow install the content of dvd3 and dvd"Content" seperatley?
(do I need dvd "content"?)
Or how about If i create images of em and then mount em...think that would work (know a good free program?)?
would appreciate some help
VectorCookie

I strongly suspect a bad production run of Adobe DVDs - I had enormous problems (see previous thread somewhere in this forum) attempting to install my Student Version Design Premium from the DVDs which Adobe sent me. I then had absolutely no help from their telephone support. I then had similarly no help from their online support portal - and, in fact, got really mad at them about it all. I spent days trying to sort it out. This message board - and one guru in particular - was very supportive and patient.
My solution: I downloaded the trial version of the Creative Suite I had bought, installed from that (fast, easy, no problems at all) and then used the product key from the DVDs I had bought direct from Adobe. So, I had to spend three days downloading (very slow broadband here) but it did, at least, get me a working copy.
I wish Adobe would own up to sending out duff DVDs - but when I asked them (about the second question I asked in my first phone call) I was told that it was so unlikely that she (tech support woman) wanted me to try (all manner of ridiculous) other things first.
Sarah

UDMA problem with DVD player

Hello,
I have a problem with my new MSI DVD player(model MS-8216M) :it will not work in UDMA mode 2 as it is supposed to in any normal, acceptable configuration. When I connect it as a secondary master or slave it works at multiword2 or PIO and will not go higher. It will only work in UDMA mode 2 if I connect it through my harddrive (but drops back down to PIO after a while)or when it is a Primary slave and my HDD is a Secondary Master (but also goes back to PIO after a while).
Here's what I have already tried:
Removing the secondary IDE channel in device manager, reboot and let windows auto-detect. Bought a new IDE cable. Re-installed windows twice since i bought it (Not upgrade).Tried various Master/Slave and IDE combinations (and always changed jumpers correctly).
Could someone please shed some light on this annoying
problem? I exchanged this drive twice already so I don't think that the MSI is at fault. Is it my motherboard? Please help.
Thank you
Nyah

http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=63%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-8216M
see if that firmware is newer
what does bios say drive is can help with what firmware you have

Problems with DVD created in iDVD

I have a project I put together using Final Cut Express and Logic Pro. I created the DVD project using iDVD, and am having problems with the disks that I burn - they hang part-way through on various devices (after multiple burns).
I then saved the image to an .IMG file and tried to burn it on 2 different computers using different media (DVD+R and DVD-R) and at different burn speeds through Disk Manager. The disk burns ok, but fails validation with the message "Unable to burn ... (Verification of the burn failed.)"
When I mount the image on my local hard drive and play it through DVD Player, I experience no problems. This is really, really strange.
Brian

Nope. Can't do it that way. Much better to do a fresh install to each mac......or Unless you made a bootable clone of your existing HD with CCC or SuperDuper on a like mac system. Did you do this?
In other words, to clone an existing HD you'd have to format the ext. HD to mac os extended and then move the ext. HD to a similar mac from which you would boot you mac from like this:
Click Here
Hope this helps but if not just comer on back.

Problems with DVD, IPhoto,etc.

I cant play DVDs and I cannot install software for my digital camera which is on a CD. Is this a problem with the CD drive? I have only had this IMAC for a few months. These things shouldnt be happening. And is there more qualified people that I can talk to. I appreciate the help anyone can offer but if I am going to pay $1700 for this computer then it needs to work for more than a summer! Help!

Hey croth75.
It very well could be a hardware problem but let's try a little maintenance first.
Open Disk Utility and do a Repair Permissions.
This has worked for me before it similar situations but it is not a cure all.
After you Repair Permissions you might try a restart.
If you are still having problems, try inserting the install disk and restart while holding down the 'C' key. I know this may not be possible for you as you are having disk related problems, but maybe.
After you start up from the install disk, locate Disk Utility from one of the top menu tabs and do a Repair Disk.
After it is done, restart and see what you get.
I hope some of this helps.

Problem with DVD making.

we have a problem with making DVD-files from Adobe Premiere Pro CC. We haven't Adobe Encore and can't it to download.

Encore CS6 is available to Cloud members. You have to download and install Premiere Pro CS6 to get Encore CS6.
http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html

Problem with DVDs (X-

I think I also have a bad card. Does this sound like one?Anytime I insert a DVD my computer will BSOD. THis started right when I got my X-FI in May. I have ruled out everything in my computer from being the cluprit except this. I have the latest bios from ASUS (A8n sli-premium, rev. 009, I think). I'm going to remove the card and see if it works.So, do you all think this is a problem with my X-FI, or is it something else.Message Edited by Catherina-CL on 09-05-2006 09:40 AM

festivus528,
Is it a DVD-Audio or DVD-Video disc? Do you have any firewall software(brand?) installed in your computer as I remember reading from some past forum user posts mentioning of similar problem with some firewall software when using with DVD-Audio. I think is Kerio firewall.
Jason

Importing Compressed Video into DVD studio Pro: PROBLEM WITH SYNC

Hello,
This post regards software from Final Cut Studio 3
So, I have made a 2 minute clip in FCP7, exported it, compressed it using compressor, and then opened up dvd studio in order to burn it.
I have made sure the lengths of the audio and video were equal in FCP.
The problem is that when i drag the M2v and AC3 files into the DVD studio pro timeline, The audio is slightly longer than the video track.
I am creating a loop and want to duplicate the tracks within DVD studio to make use of the full dvd....so after i have added the files into the timeline a few times, there is a noticable lag, due to the discrepency between the length of audio and the length of the video.
I have even tried to change the length, under 'duration'in the track menu, but this makes no difference.
any help much appreciated.
THanks, Bradley

Bradley Zero wrote:
The looped clip in question is APPROXIMATELY 2 minutes. Infact, the DVDs are for an art installation, with numerous clips all Approx 2 minutes long, set to loop using dvd studio to around 20 minutes. (snip) However the loop is fine tuned so cutting frames to allow for the different frame rates of Ac3 and M2v is not an option.
So far I have only made a test batch, next time to avoid these problems I will Loop the files within FCP7 before exporting and compressing to avoid frame rate discrepancies. good idea??
I'm not surprised to hear that the clips are for an Art installation. I once helped my partner with multiple looped VHSs for a Degree Show & believe me DVDs make life a whole lot easier!
In conclusion I would recommend that you do a separate sound & vision edit, so to speak. Once you have finished your vision edit, lay down the single (compressed) vision clip on a track in DVD SP. Loop it to taste, and make a pencil note of the number of loops. Go back to FCP & duplicate your original final edit (ie the 'lock down') & loop the sound to match. Play out just the complete soundtrack at the new ~20 minutes and encode the resulting mix to AC3. Add it into DVD SP3. Voila! Really this is no different from making a movie; when the sound is going to be worked on by a whole different set of people from the pictures and both added together when complete.
... is there an alternative sound format to export in that is compatible with dvd studio pro that will sync perfectly in the sequence?
Of course uncompressed .aiffs don't suffer from the frame-based problem and are compatible with DVD SP. However using uncompressed sound is not recommended as this can lead to playback problems - especially with DVD-Rs - because of the high bit-rate.
BTW where is the show? Regards, Stedman.

MSI 6380 Problem with DVD burner

Hello
I have a prob with my new DVD burner. Maybe someone of oyu has any idea what could be the prob.
I have an Athlon XP 2400 (T-Bred) on my board (MSI Kt7 266, MSI 6380 v2). I have done the C37 mod and removed the cap. Everything worked fine. Processor correctly recognized etc.
First my old DVD burner and my old DVD-ROM stopped working (means they didn't react to any commands anymore, I pres sejecct and nothing happens...) and after thorough testing (different combinations with correct jumper setting master/slave/CS..., new cable...) I thought they're broken and got a new DVD burner. But after installing this one - sampe problem.
This is the problem in deatils: The bios does recognize the burner in autodetection in the bios or with the setting "auto". Then it says "DVD" for the respective IDE channel and during bootpu it shows the correct name of theburner (LG GSA-4163). But the drive does not react on commands. If I press eject the lamp on the drive starts blinking but nothing happens, the tray does not open. It blinks a few times then blinks a few times very fast but nothing happens. The drive is listed in the explorer in WIN but I cannot access it. Also, the device manager shows no problem. All my HDD's work fine even on the same IDE channel.
Does anyone encounter a similiar rpoblem or have any idea how to solve this?
Thanks.

I got another psu, more powerful then my old one. Same problem though. Can it be that this is the third optical drive in a row that fails?
Strange is that with the new psu (3,3-28A, 5V-35A, 12V-26A, 410W combined, ANTEC Truepower) my hardware monitor shows that for all the power the values are lower compared to my old psu. It shows 3,26 V 4,9V and 11,7V repsectively. With the other psu all values were higher. Is that an error or does this new psu suck?

How to reset the BIOS to solve a problem with DVD burner on Satellite P100

Hi
I am trying to reset my cmos to solve a problem with my dvd burner.
I was trying to run an old game that I own that was protected by starforce and ran starforce nightmare with has made the device completly inoperable.
After much searching I have heard to reset cmos.
I have treid through debug and nothing happend. I don't really want to open up the laptop and pull the cmos battery out or leave it for a month until the cmos battery runs out.
Is there any advice on what I should do.

Hi
What you want to do is simply not possible you said that you had some problems with PCs and you fixed it.
That's great. But a PC is simply different and cannot be compared with the notebook
> I was trying to run an old game that I own that was protected by starforce and ran starforce nightmare with has made the device completely inoperable.
According to your statement above you CD/DVD drive issue could be related to the installed starforce nightmare. I dont know this but I presume this software/application has changed or destroyed the CD/DVD drives firmware.
Sorry but I see only one way to get it working again You have to contact the ASP in your country. Maybe a technician would be able to rescue the drive
PS: your Satellite P100 PSPA6A series seems to be a Australian series therefore you should use the Toshiba Australian page if you need some drivers or BIOS
Bye

Problem with dvd rw dw-u12a i tunes pleaseeeeeeee!!!!

Hallo to everyone, I have obviously a problem with burning a cd with i tunes on pc.
Obviously because I am in this section, don't have a fool on me please.
ok if someone can help me, this could makes me really happy. B noir told me to post here the cd diagnostic and ask to u 4 some help.
So please, if u have time help me.
thanks very much
this is the cd diagnostic, it's in italian, sorry:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Sony Corporation PCV-RSM31(CE)
iTunes 6.0.1.3
Driver CD 2.0.4.3
DLL Driver CD 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), Pfc (2.5.0.201), Pfc (2.5.0.201),
UpperFilters: GEARAspiWDM (2.0.4.3),
Driver video: NVIDIA GeForce FX 5600 \GeForce FX 5600
IDE\DiskWDCWD1200BB-98DWA0____________________15.05R15, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskSEAGATEST3250823A_____3.03, Bus Type USB
USBSTOR\DiskSony___UMH-U_HS-CF____2.12, Bus Type USB
USBSTOR\DiskSony___UMH-U_HS-MS____2.12, Bus Type USB
USBSTOR\DiskSony___UMH-U_HS-SM____2.12, Bus Type USB
IDE\CdRomPIONEERDVD-ROM_DVD-121R________________1.00___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomSONYDVD_RW_DW-U12A_____________________2.0d___, Bus Type ATA, Bus Address [0,0]
SCSI\CdRomV386___STEALTH_DVD____1.0h, Bus Type SCSI, Bus Address [0,0]
Se hai unità multiple sullo stesso bus IDE o SCSI, tali unità potrebbero interferire l'una con l'altra.
Alcuni computer richiedono un aggiornamento al driver bus ATA o IDE, oppure al chipset Intel. Se iTunes ha dei problemi nel riconoscere i CD oppure se si interrompe o si blocca durante l'importazione o la masterizzazione di CD, consulta il sito web del su
L'utente attuale è amministratore.
E: Unità CD o DVD non supportata.
Le unità virtuali possono interferire con la lettura e scrittura di CD in iTunes. Se questa è un'unità virtuale e stai riscontrando problemi con altre unità, tenta di disinstallare l'applicazione di CD virtuale.
F: Unità CD o DVD non supportata.
Le unità virtuali possono interferire con la lettura e scrittura di CD in iTunes. Se questa è un'unità virtuale e stai riscontrando problemi con altre unità, tenta di disinstallare l'applicazione di CD virtuale.
J: Unità CD o DVD non supportata.
Le unità virtuali possono interferire con la lettura e scrittura di CD in iTunes. Se questa è un'unità virtuale e stai riscontrando problemi con altre unità, tenta di disinstallare l'applicazione di CD virtuale.

hi menazone!
hmmm. okay, i think you should start a new thread over in the "Importing and Burning" forum where the people with experience with that error message spend more of their time.
in that post, include your error message and make and model of CD again. also go into itunes go "help > run CD diagnostics, and paste all the results of that into the new thread.
(not trying to get rid of you, just trying to get you on the right radar screens.)
love, b

HP Pavilion DVD-3013eo recovery problem with dvd`s Win 7 x64

Similar Messages

Maybe you are looking for