HP Pavilion elite e9220y home premium desktop; prod #: NY553AA; windows 7 64 bit

I think my fan is 'going'? I checked online for the difference between a hard drive failure and fan failure; and I think it closest to a fan noise; the noise occurred twice in the last couple of months; not often; but often enough to scare me into wanting to do something!
I'm not tech savvy; I would have someone replace it; but is that what I should be getting done? what else could the noise be?
if it's the fan, what should I buy specifically? and from anywhere? I assume it doesn't have to be an HP part?
thanks! : )

Hi
Please find the manual link given below you can try to remove the Hard drive and power on the unit & have it checked once.
Link
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

How big of a hard drive can I install in my HP Pavilion Elite e9220y Desktop PC

I have a HP Pavilion Elite e9220y Desktop PC I have gotten an error on my hard drive BIOHD-8 imminate failure, I am going to replace my drive and would like to know if I can replace it with a 2 TB?

Hi,
Should be ok to use 2TB HDD and lower. Anything bigger/larger (capacity) than 2.2TB you may get problem and have to do more work to be able to get it right.
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I add USB 3.0 to my HP Pavilion Elite HPE-190t CTO Desktop PC?

How can I add USB 3.0 to my HP Pavilion Elite HPE-190t CTO Desktop PC? It uses Windows 7 Pro 64-bit OS.
I can't tell how many or if there are expansion slots inside the case. Is there a reliable source for such an expansion card?

Considering the different options that PC could have been ordered with, it might be there is not an empty slot to mount a PCI add-on card to add a USB 3.0 card. It would be advisable to open the case to see if there is an empty slot. If there is, then THIS is a choice to add USB 3.0
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

I recently brought a mac and downloaded windows with the help of boot camp and by mistake i installed windows 7 ultimate version whereas i had the cd and serial key of windows home premium i started installing windows home premium from windows 7 cont...

I recently brought a mac and downloaded windows with the help of boot camp and by mistake i installed windows 7 ultimate version whereas i had the cd and serial key of windows home premium i started installing windows home premium from windows 7 ULTIMATE then after the exctraction of files and everything the windows setup came and my mouse and keyboard stopped working and i dont know how to open mac os x there is no option anywhere?? what shall i do pls help!!!!if there are any keyboard shortcut key to open mac os x or boot camp pls mention.

For Boot Camp issues please repost in the Boot Camp forum located by clicking Boot Camp

Can i use my CS4 design premium on my new windows 7 64 bit laptop?

can i use my CS4 design premium on my new windows 7 64 bit laptop? [info removed]

Adobe have not tested the CS4 on Windows 7 but you can try to install it should work.

Windows 7 64 bit home premium desktop Pavilion Elite150f

At present I am using a Pavilion Elite HPE-150f desktop, windows 7 home premium 64bit, I use Microsoft works Task Launcher a lot of the time and it came pre installed on my desktop.
Now I have purchased a new HP Envy 700-019 windows 8 64 bit desktop, still in the box and not set up yet, is there any way I can install Microsoft works task Launcher onto my new desktop without a disc. I have the recovery discs but no disc just for Microsoft works task Launcher.

you can put MS works on your windows 8 system. you just need a MS works disc.
like these
This country, with its institutions, belongs to the people who inhabit it. Whenever they shall grow weary of the existing government, they can exercise their constitutional right of amending it, or exercise their revolutionary right to overthrow it.
Abraham Lincoln

I am using a windows 7 home premium desktop 64 bit

At present I am using a HP pavilion Elite desktop PC, windows 7 64 bit, I am not sure if I should upgrade this or just buy a new windows 8, I purchased a windows 8 Notebook for my spouse but found it lacking in that it does not come with media center or Lightscribe, or Microsoft works that I use a lot.
What would be involved to upgrade this PC or would it be easier just to buy a new one, and can I get the features I like installed on a new computer.Any suggestions would be appreciated ,thanks.
This question was solved.
View Solution.

emma22 wrote:
Thanks for taking the time to reply, I have at present HPE-150f desktop, product # AY603AA-ABL,
serial # [Personal Information Removed], it has a 1 TB hard drive and 8GB -DDR3, Intel R Core i7 CPU [email protected], super multi DVD-burner with Lightscribe, purchased in 2010,
I am from Canada so not sure if the serial # and product # is different to what would show in the USA but hope this info helps. I really do not like windows 8, we purchased a notebook earlier this year and came with a 2 year warranty which I really like but a lot of the programs that I use often are not included in windows 8, I like windows media player, media center, Microsoft office task manager, these items are an upgrade in windows 8.
I only use it for home use but not sure how long Microsoft is going to support windows 7 or I would just upgrade my home premium, I am hopeing to keep the system current as being retired cannot repurchase every 2 or 3 years, printers are pretty cheap to purchase and the one I purchased at the same time photosmart plus B209a is still going strong but my new 7510e has been a nightmare.I do not do gaming on my computer but like to do photo's and other projects and want lots of room and speed which is the reason for the 1 TB HD.
Considering how long Windows XP was supported, I can safely say that Windows 7 will be around and supported by Microsoft for a number of years to come.
There are no Windows 8 driver on the web support portal in the driver download section for your Pavilion Elite HPE-150f desktop PC. That should be a prime consideration in the upgrade or replace decision. Your current system is fine, but given the fact that it is from the 2009 models, for safety of data and your peace of mind, I recommend upgrading it within a year. Four to five years for a home PC is a reasonable product lifecycle expectation. After that It may or may not run as expected. It would be also a good idea to save your photos to an external disk. If you buy a new PC with Windows 8 Pro as the operating system, then Media Center is included in the purchase.
The media center upgrade for the notebook running Windows 8 is relatively inexpensive, but not free. You can download and use the Microsoft Office 2013 starter version for free. It is the replacement for Microsoft Works.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Hp pavilion elite e9220y processor upgrade

My pc is running the original AMD hdx910wfk4dgi I bought it with. I really don't want to replace the pc so I doubled the memory to 16Gig and added another TB hard drive. Can I buy a faster, more capable processor without changing or altering the MB? What would be the fastest, newest, most cabable processor that this pc could run? Please dont tell me I have it ;-)
Model HP e9220y
Prod# NY553AA#ABA
SN [Personal Information Removed]

The AMD Phenom II X4 9xx/9xxe/8xx Quad-Core (D) are the high end chip(s) acceptable to your board.
Not the Black Edition series.
Under the 9xx I found the following.   Source page.
HDX945FBK4DGIAMD Phenom™ II X4 9453000   125 W
HDX945WFK4DGMAMD Phenom™ II X4 9453000   95 W
HDX945WFK4DGIAMD Phenom™ II X4 9453000    95 W
Under the 8xx only the HDX840WFK42GM   AMD Phenom™ II X4 8403200 95 W
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Vista Home Premium - Error code 80070490 - Windows update

Computer - Satellite 200
Operating system - Vista Home Premium (service pack 1)
Problem - When I try to update from Windows Update (both manual and automatic) I get error code 80070490
I have tried - System restore, downloading and paying for "RegCure" and following instructions on Microsoft forum all without success.
The computer was supplied with a recovery disk which does not have "repair" facility.
If you have a solution that does not involve a full re-load I would be very grateful
Please make instructions comprehensible to a non-techno!
Thank you

This error may occur if the older Windows Update engine files cannot be
replaced by Windows Update Agent 3.0 (7.0.6000.374).
To troubleshoot this issue, I suggest we first reset permission and
reinstall Windows Update Agent 3.0.
Step 1: Reset permission
================
1. Please download the subinacl.msi file from the following link and save
the installation patch onto the Desktop:
http://www.microsoft.com/downloads/d...inityDownloads
2. Please go to the Desktop and double click the downloaded file.
3. Please select the C:\Windows\System32 folder as the Destination Folder
during the installation. Later we will use this tool to reset the permission
settings on the current machine.
Note: If UAC (User Account Control) window is prompted for permission to
continue, please click Continue.
4. Click the Start Button, in the Start Search bar, type: "notepad" (without
quotes) and press Enter.
5. Copy the following commands and then paste them into the opened Notepad
window:
@echo off
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f
subinacl /subdirectories %SystemDrive% /grant=administrators=f
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=system=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=system=f
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=system=f
subinacl /subdirectories %SystemDrive% /grant=system=f
@Echo =========================
@Echo Finished.
@Echo =========================
@pause
6. After pasting the above commands, please close the Notepad window. Choose
Save when you are prompted to save the file. Type "reset.bat" as the file
name and choose Desktop from the left panel as the save location.
7. Refer to the Desktop and right click the reset.bat file, then choose "Run
as administrator."
8. You will see a DOS-like window processing.
NOTE: It may take several minutes, please be patient. When it is finished,
you will be prompted with the message: "Finished, press any key to continue".
Step 2: Reinstall Windows Update Agent 3.0
===========================
1. Please download the file from the following link:
Windows Vista (32bit)
http://download.windowsupdate.com/v7...gent30-x86.exe
Windows Vista (64bit)
http://download.windowsupdate.com/v7...gent30-x64.exe
2. Save the file to D: drive.
Note: Please select a drive where Windows Vista was not loaded because the
file cannot be launched directly from the system root directory.
3. Click Start->Run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce"
(without quotations) and then press Enter to install the Windows Update
engine.
Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and
"/wuforce"
Now, let's run Windows Update again.

Remote Desktop Connection freezes Windows 7 64-bit

At home, I just upgraded from a Windows 7 Ultimate 32-bit desktop to a new Dell with Windows 7 Ultimate 64-bit OS. Remote Desktop Connection from my old home PC to my work PC worked great for years even after upgrading both to Windows 7 Ultimate. Now everytime I try to use Remote Desktop Connection (RDC) to connect into my work PC (with Windows Ultimate 7 32-bit) the RDC window will freeze after a new seconds of use. If I wait approx 3 minutes the RDC window will unfreeze for a few seconds before freezing again. If I minimize the RDC window on my home PC, I can continue to work because it's only the RDC window that is frozen. Here is everything I've tried already that has not helped:
1. Trying reducing the home PC screen resolution
2. Downloaded the latest 64-bit driver from NVIDIA for the GTX 260 graphics card
3. Taken my home PC to work to test behind the company's firewall--doesn't help
4. Disabled Window Auto Tuning (suggestion from this website)
5. Called Dell support--they tried for about an hour to help but couldn't; thier suggestion was to order Windows 7 32-bit version OS and install it
6. Tried running the 32-bit version of mstsc.exe - no help
7. Using MSCOMFIG, disabled all Startup items - no help
I have another home PC running Windows XP, it works perfectly using RDC to connect to my work PC. Also, I have no problem at all using RDC from my work PC back into my home PC (the other direction).
Here may be a clue: if I start up my new Dell Windows 64-bit OS in Safe Mode, the RDC session does not freeze.
Any suggestions would be appreciated!

Hi,
Since it works in Safe Mode, I suspect this should be related to some conflicts, please try the methods in the following Knowledge Base article to have a check:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
In addition, please also ensure the NIC drivers on all of the computers are up-to-date.
Hope this helps. Thanks.
Nicholas Li - MSFT

Sync BB desktop software with Windows 7 64 bit

Dear Friends, I am rally stuck here. I just bought a new laptop with MS office 10 and windows 7, 64 bit. I was earleir using xp and was able to sync my phone with laptop very easily. Now after buying the laptop I just realised that I am not able to sync my BB software and my phone and not able to transfer my data to my laptop.
I tried downloading outlook but it is not getting done, sighting, not possible. I also tried syncing with Morzilla and windows live as well But the desktop software just not identifying neither of them.
Can some one please help me here, in how to sync my phone to my laptop with windows 7 and transfer my contacts and calender on to my laptop.
Other wise I will have to throw away my BB and buy some other phone.
Regards
rohit

Hi and Welcome to the Community!
First off, you must have installed one of the compatible Desktop Organizer apps:
KB12268Applications supported by BlackBerry Desktop Software for Windows for synchronization
Attempting to use anything NOT on that list will, of course, fail.
Secondly, you must have not have Outlook installed as "Click To Run":
KB24040 Support for Microsoft Office 2010 Click-to-Run installation
If you have it installed in that manner, you must correct that.
I have no idea how your prior machine was configured, but I know 100% that you can synchronize to a Win7X64 Laptop with Outlook 2010...I do it all the time.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I have a hp pavilion elite series hpe-490t desktop pc, would 2 560ti in sli work if i get a new psu

Expansion Slots 2 PCIe (x16 graphics), 1 PCIe (x4), 1 PCIe (x1)
MOTHERBOARD
Manufacturer: Pegatron IPMTB-TK
HP: Truckee-UL8E
Intel X58 Express
Will this accept SLi OR CROSSFIRE ?
THANKS

Hi jackie,
I have the same motherboard in my HP e9280t. I have never seen HP post SLI or Crossfire support for any of the main line PCs.
SLI or Crossfire may not improve the performance of your application. Even a dedicated NVIDIA Physx card may or may not help. You might want to do some research.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Cannot load a FAx driver for a Hp Laserjet 1536dnf MFP on a HP Pavilion Elite e9220y Computer

I cannot find a fax driver for this printer to install on my computer.
I have uninstalled and reinstalled the printer a couple of times It will print and scan but not fax.
I reinstalled fron the orignal disk and off the HP website neither get me fax capablilites.
I have gone to support and cannot find the drive on eith er the printer or computers web page at HP.Com
Please let me know what to do.

Hi @thesaneone4 ,
I see that you are experiencing issues with the fax driver not installing. I would be happy to help you.
Check the connections in the Device Manager for any printer entries, under Universal Serial Bus Controllers look for Fax LEDM or any unknown devices. Right click and try to update the driver. How do I get into Windows Device Manager?
In the Devices and Printers window, what icons do you have for the printer showing?
If you are still having issues, you will need to uninstall the printer software from the CD and unlock the hidden Admin Account when installing the printer software, to make sure there isn't any interference.
Disconnect the USB cable.
Uninstall the software by going to Start, Computer, right click on the CD and open it, then double click on uninstall.
Then download and run the latest software. HP LaserJet Pro M1536dnf Multifunction Printer.
Unlock Hidden Administrator Account and install the printer on this account:
Go to your Start menu and under the 'search programs and files' box type CMD.
CMD will populate as a search option above, just right click on it and 'run as administrator'.
Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter.
Next, close CMD and restart your computer.
When your computer comes on log into the new account that should show. It will be called Administrator and will not have a password on it.
If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator account we just unlocked.
Under the Administrator account, install the printer software.
Test the printer.
To turn off the Admin account start back at step 1 and type in net user administrator /active:no.
Please let me know the outcome.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Palm desktop sync with Windows 7 64-bit

I can see that this topic has been beaten to death here, but I can't seem to find an answer despite a number of search attempts. I'm trying to hotsync a Treo 90 to a Win7 64-bit machine via a USB connection. I have Palm Desktop v. 4.0.1 running. I have downloaded and installed the 64-bit drivers recommended here and can see the Treo in the Device Manager - it seems to be running normally, no yellow query. Yet, when I try to hotsync from the device, it just hangs, waiting for a connection that never happens. I'd appreciate any advice as to what I might have done wrong or what to do next to try to fix the problem. Thanks much,
BRJ
Post relates to: Treo 90

I do not know if it will work. In his post at brighthand that he made the Aceeca driver available to the palm community Alex stated that it should work with many Palm devices that were os 4 or 5. You are using an older version of the palm desktop and one of the older os 4 devices. I do know of people with the palm m505 and m515 using the Aceeca driver with success, but they were using a newer version of the palm desktop. I believe most were using the 4.1.4 palm desktop version. I do not know if experimenting with a newer desktop version will help either.

I have a problem with my pavilion dv4-2045dx dvd/cd rom drive for windows 7 64-bit

I can play CD's and watch dvd movies fine. The drive have no problem reading cd and DVD's. My problem is with cd-rom and blank CD's and DVD's. I can't burn anything. For some reason, it won't read any cd-rom disks. This has never been a problem before. I tried the idea about the upper and lower filters but when I searched, I didn't see any upper or lower filters. I tried the microsoft fix it and nothing was wrong. I looked at the device manager and it shows no problem at all. What should I do next?

Hi, did you say this issue just started?
If so have you tried a system restore back to date when it was working?
Here is a link to a document on running a system restore...this is not like a recovery, it won't wipe out all your data
.http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00807369&cc=us&dlc=en&lc=en#N315
Just click on the heading for "Returning the computer to a previous restore point"
I am an HP employee
Knowledge is power...Power to the people

HP Pavilion elite e9220y home premium desktop; prod #: NY553AA; windows 7 64 bit

Similar Messages

Maybe you are looking for