Hp pavilion entertainment pc display problem

when i am starting the lap the black screen is appearing green and there is a shades of pink when desktop appears and green colour continues
display is working good when it is kept at low angle.
when i connected to separate monitor it is working good
tell me the problem , suggest me the solution
thanking u in advance

Hi @narendra100 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion Notebook and issues with multi-color screens. Here is a document on overheating, which could cause the Notebook to display multi-color screens due to dust on the Notebook.
You could reset the BIOS with this document selecting the reloading the BIOS default settings.
If that does not help at the end of the document it shows you to do a hardware test.
When is does not show on the monitor this could be an inverter issue or LCD screen malfunction.
Please note remove any and all USB devices before troubleshooting. Disconnect all non-essential devices.
I would be happy to assist if needed with part numbers if needed. How Do I Find My Model Number or Product Number?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

HP Pavilion 27xi Monitor: Display problem Mac Mini running Yosmite

Image quality is very poor for Mac Mini running Yosmite connected via HDMI.
Adjusting overscan helps scaling, but pixelation and poor image quality is not changed (very blurry)
Using VGA/mini display route with same devices, image quality if far better showing that somehow mini conncected to HP monitor via HDMI could be improved via driver update.
Is there a driver update for Yosmite?
Only drivers found were for Windows:
http://support.hp.com/us-en/product/HP-Pavilion-27-inch-Displays/7274719/model/5304250/drivers
Please help
This question was solved.
View Solution.

Hello @adsben,
I understand that the image quality for your HP monitor is poor when connected to your Mac Mini, and I would be happy to assist you in this matter!
According to this document on using HP Monitors on a Mac:
"HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
I hope this helps!
Best Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Display problem in my hp pavilion -15e015tx the screen blinks and get freeze for a second

i am using hp pavilion 15-e015tx running window 8 i had complained on 18 oct 2014 regarding the display problem. my case id is 4739018980. till now the issuse is not solved. the engineer came , checked the laptop and said quotation will be send within few days and tookaway his service charges Rs.1400. Still waiting for the quotation .every time i call in hp support service they tell they will send quotation the same day but there is no response. pls send the quotatiom as soon as possible. i am feedup calling hp support care now.
"very bad support service"
"3rd class customer service"

Hi @Poo0507 ,
I just sent you a private message. If you are not sure how to check your forum messages this post, has instructions.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

My note book ( Pavilion G series) displays a fan error on startup .

My note book ( Pavilion G series) displays a fan error on startup and fails to boot unless I press Enter. The cooling fan is not working. What to do. i purchased it just a month back. i am using windows 7.

Hi,
Are you talking about the whole computer or just its fan (1 month old) ? Please contact HP directly to get help:
http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
http://welcome.hp.com/country/w1/en/support.html
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Blue Screen of Death at HP Pavilion Entertainment tx2500

I am indeed upset with the laptop (HP Pavilion Entertainment tx2500) I bought in April 2009. A few weeks after I had bought it, the Blue Screen of Death (BSOD) started to appear. Since then the computer has been crashing, but not following a regular pattern. Sometimes it does not crash for days, even more than one week. Then suddenly in one only day it may crash several times.
I should be already used to it and save my work frequentley. But I am distractful person and often I forget to do so. I have lost many hours of work due to the BSOD, and I do not know to whom I should complain: HP? WIndows?
SO is Windows Vista, and I have heard from other people that they also had problems. I think that either HP or Windows should bring the opportunity to replace Windows Vista by Windows 7 to those that had problems with Vista.
I had another HP Pavilion (older model) and never had to come through such a nasty experience as having a BSOD episode after having been working for a few hours without remembering to save the work done.

Many things can cause a blue screen event... hardware, software, a faulty driver, etc. If this has been happening since only a few weeks after you purchased the system, it would have been prudent to have addressed the situation at that time as this is obviously a serious problem.
It is unlikely that your problems would be resolved simply by installing a different operating system.
Microsoft MVP

Apple just would not entertain their own problem

My i5s has a screen display problem that is verified by the few service centers technicians to be hardware problem. But because the warranty is slightly over 1 month off its 1year warranty, I'm totally shut out from lodging any service request either through Apple online support or the service centers. I've been ding-dong here and there by the Apple online and the service centers without any proper explanation. The final conclusion is that Apple just WOULD NOT entertain my request AT ALL!! I've posted on this forum, but what's the use? Apple won't even acknowledge at all, just hoping someone in the community will reply on their behalf. having said all these, are Apple phones meant to last only 1 year? This problem is clearly Apple's, but they simply just do not acknowledge it. What can I do? Do I need to resort to social media to air my grouse?

mkow22 wrote:
My i5s has a screen display problem that is verified by the few service centers technicians to be hardware problem. But because the warranty is slightly over 1 month off its 1year warranty, I'm totally shut out from lodging any service request either through Apple online support or the service centers. I've been ding-dong here and there by the Apple online and the service centers without any proper explanation. The final conclusion is that Apple just WOULD NOT entertain my request AT ALL!! I've posted on this forum, but what's the use? Apple won't even acknowledge at all, just hoping someone in the community will reply on their behalf. having said all these, are Apple phones meant to last only 1 year? This problem is clearly Apple's, but they simply just do not acknowledge it. What can I do? Do I need to resort to social media to air my grouse?
Your iPhone came with a one-year hardware warranty. You had the option (and apparently declined) to extend that coverage with AppleCare/AppleCare Plus.
You are reporting a problem to Apple after the one-year warranty has expired.
Therefore, service for your iPhone will incur an associated cost. In the U.S., thats $269, compared to $549 or more for a new device. So, instead of telling you to buy a totally new device, Apple offers to replace your device at a 51+% discount. Not many tech companies do that.
What is difficult to understand about all of this?
There has to be a definitive expiration date for warranty-service. You're wanting to shift that time frame to suit your needs. But you can't change the deal after the fact. If one year was not enough to suit your expectations, then why did you purchase the product?
The last car I bought had a 3 year/36,000 warranty for everything except the power train. If on the 37th month or at 37,000 miles I encountered a problem, then I would pay for the service. If I didn't think that was fair, then I should have taken steps to extend that coverage, which I did to be on the safe side.
Here's your 'proper explanation': Your iPhone has some form of hardware issue. The root cause is unknown, but (probably) irrelevant*, because you are outside of your hardware warranty coverage. Therefore, if you require or desire service for your device, unless your specific issue is covered under some form of extension program, you will pay for such service.
There. All done. Have a nice day!
*Note: If your iPhone has been opened or serviced by an unauthorized individual, then Apple reserves the right to refuse any and all service and support for that device, permanently.

Broken graphics card affecting motherboard of HP Pavilion Entertainment PC SD*MS/Pro*MMC*XD

Hi guys,
I need help with this: my laptop broke two weeks ago. After having a technician look at it I was told the problem could easily be fixed my HP.
Basically he said my graphics card broke and it affected the motherboard, he said this was something easy to fix and that I could send it to HP to be fixed.
When I switch the lap top on, the screen is blank and it beeps 3 times. Apparently there's nothing else wrong with it except for this. Prior to this happening my screen went funny for about 2 weeks until it 'died' one day.
The operating system installed is Windows XP.
No changes made to the system before this incident.
Full product name: HP Pavilion Entertainment PC SD*MS/Pro*MMC*XD
Please let me know where I can send it to and if this is free-of-charge since it's a recurring problem with some HP notebooks.
Thank you for your help.
Brds,
Joana Antunes

Hi @lbpatel ,
Thank you for visiting the HP Support Forums. I'm sorry to inform you that your post has needed some editing to remove personal information such as email and phone numbers. From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
I have forwarded your post to the appropriate individuals for their review. Someone will contact you via Private Message on this Forum.
Thank you,
George
I work for HP

HP Pavilion Entertainment laptop recovery

hi,my HP Pavilion Entertainment laptop has power on password after 3 fail attempts it says system disabled 58773831.plz give me a password.
This question was solved.
View Solution.

Hi,
Enter: 47651217
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Retrieve password for HP Pavilion Entertainment PC dv6700

I have forgotten the password for my HP Pavilion Entertainment PC dv6700. How can I retrieve the password or reset it?

Hi,
Iff this is your Windows log-on password, try the following.
Using another PC, download the application on the following link and save it to your Downloads folder.
PC Login Now
When the download has completed, open your Downloads folder and double-click the installer - this will result in another file appearing which is the disc image ( .ISO ) that you need to burn to a blank CD.
You will now need to use an application such as ImgBurn to burn this ISO correctly to a blank CD - a guide on using ImgBurn to write an ISO to a disc is Here.
When the disc has been created, shutdown the PC you can't log-in on, tap away at the esc key as soon as you press the power button to access the Start-up Menu, insert the CD, select Boot Options ( usually f9 ), use the arrow keys to select the CD/DVD drive and hit enter - you may also have to 'Press any key' to boot from the CD if asked.
Follow the instructions on the guide Here to remove the current password.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I have HP Pavilion Entertainment PC, OS Windows 7. My volume scroll zone will not adjust the volume.

Any solutions?

What model is your HP Pavilion Entertainment PC. You can find the product number on the tag where your serial number is. This will be very helpful in troubleshooting your issue.
Although I am an HP employee, I am speaking for myself and not for HP. Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!

HP-Pavilion Entertainment PC DV9700 rebuilding

I have a notebook HP-Pavilion Entertainment PC DV9700, - p / n --- FE695UA # ABA Service Tag DV9925 nr
With Windows 7
He began presenting video failures to overheat, with an outdoor fan, the "cooling" and could keep running, then no longer lit more, take her to a local technician and made a repair that kept running for several months, then present total failure and has reignited, the technician tells me the video card that model came with a factory problem and it happened that, he responded with the warranty, my laptop while it is outside the warranty, I still want to fix it, if I have to pay for it, I'm in the Dominican Republic where temperatures are very high, that coupled with the failure origin motherboard, would ruin again, if you put the motherboard that originally brought the second solution is to replace the local technicians original MB AMD for one that fits and works most advanced INTEL brand.
1-Where I can get this motherboard?
2 - What is your reference (INTEL)? is this HP-461068-001
3 - HP has some place where rebuildingthis Laptop, in Dominican Republic? ,
3a-Where?
4-I have a small factory where I have several products mainly HP printers and multipurpose.
They have workshops in Santo Domingo, Dominican Republic for printers (multipurpose), HP Officejet Pro 8600?
thanks
This question was solved.
View Solution.

I think I understand most of your questions. The repair on this motherboard is called a "reflow" and I am assuming that is what your technician did before. He is correct that you cannot reliably do a second reflow on the same motherboard. Each additional one lasts shorter than the last. You need a new motherboard. There is a motherboard for the dv9700 series with an Intel processor and chipset. The one you refer to, the 461068-001 is an Intel processor with an nVidia video chip. Those still have issues. The one you want is 447984-001, which is an Intel processor, Intel graphics.
Here it is on eBay:
http://www.ebay.com/itm/Tested-and-Working-Hewlett-Packard-447984-001-Pavilion-DV9500-Motherboard-/2...
This model may need some case modifications to exactly fit in your chassis. It will not have the same graphics power as your old laptop. You will also need a processor and new heatsink.
By the time you get done with this project you will have invested enough to get a new laptop. Your call. If you want more help post back.

HP pavilion entertainment PC

Hello, earlier today I was on my email, then suddenly my HP Pavilion Entertainment PC lab top shut down, and when I tried to turn it back on it only has a black screen. The CAP and SCROLL lights have been blinking in 3 time intervals. I've tried everything!! Please help!
This question was solved.
View Solution.

Hi,
Glad it helped
All the best,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Wierd lines on my display and frequent lock-ups w/ and w/o display problems

When booting I sometimes get weird lines and blocks on my display (the GRAY Apple screen) and then it hangs, other times the computer will boot and run fine for 20-30 minutes and then the display goes wonkers with blocks and lines and the computer does not respond. The only way I can get it to boot is to reset the PRAM by letting it CHIME 3x and then occasionally it will boot without issue and run, while other times I still get the blocks and lines on the display.
When I am able to get it to recover and re-boot after the lock-up and display problems and occasionally the box in the middle asking me to re-boot similar to a kernel panic the OPS gives me the option to REPORT the error and here is the error for others who would know more...
Thank you in advance,
Darren
Interval Since Last Panic Report: 104960 sec
Panics Since Last Report: 5
Anonymous UUID: 7D1AEF43-7E19-4F58-A1E0-48FA992A2814
Wed Nov 18 15:49:50 2009
panic(cpu 0 caller 0x9cdb10): NVRM[0/1:0:0]: Read Error 0x00009410: CFG 0xffffffff 0xffffffff 0xd2000000, BAR0 0xd2000000 0x5d3e2000 0x084700a2, D0, P1/4
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x5c99b7d8 : 0x21b2bd (0x5cf868 0x5c99b80c 0x223719 0x0)
0x5c99b828 : 0x9cdb10 (0xbb7fec 0xc209c0 0xbc3660 0x0)
0x5c99b8c8 : 0x147690d (0x8b5ac04 0x7edf004 0x9410 0xabd962)
0x5c99b908 : 0x1534e6a (0x7edf004 0x9410 0x5c99b968 0x9)
0x5c99b948 : 0xb51ca5 (0x7edf004 0x91ed004 0x0 0x0)
0x5c99b968 : 0xac155b (0x91ed004 0x5c99baa4 0x0 0x0)
0x5c99b9b8 : 0x145f290 (0x7edf004 0x3d0900 0x5c99baa4 0x0)
0x5c99bad8 : 0xab2821 (0x7edf004 0x91cf004 0x815200c 0x200)
0x5c99bb18 : 0xb1f172 (0x7edf004 0x91cf004 0xeb9bcc0 0xeb9bc04)
0x5c99bbc8 : 0xb202db (0x7edf004 0x91f0404 0x0 0x0)
0x5c99bc58 : 0x14bb7a3 (0x7edf004 0x91f0404 0x9 0x2)
0x5c99bd68 : 0x14ed407 (0x7edf004 0x91cf404 0x0 0x0)
0x5c99be98 : 0xad3934 (0x7edf004 0x91ca404 0x0 0x0)
0x5c99bec8 : 0x9d61fb (0x7edf004 0x91ca404 0x0 0x0)
0x5c99bf08 : 0x5491b5 (0x0 0x9499680 0x1 0x29c50a)
0x5c99bf58 : 0x5481e6 (0x9499680 0x1 0x5c99bf88 0x547d9d)
0x5c99bf88 : 0x548640 (0x8abaf00 0x7e9ecc0 0xe780850c 0x2a6e5f)
0x5c99bfc8 : 0x29d68c (0x8abaf00 0x0 0x10 0x88bbfc4)
Kernel Extensions in backtrace (with dependencies):
com.apple.nvidia.nv50hal(6.0.6)@0x136b000->0x17f1fff
dependency: com.apple.NVDAResman(6.0.6)@0x96f000
com.apple.NVDAResman(6.0.6)@0x96f000->0xc21fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
dependency: com.apple.iokit.IONDRVSupport(2.0)@0x961000
dependency: com.apple.iokit.IOGraphicsFamily(2.0)@0x943000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10C540
Kernel version:
Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
System uptime in nanoseconds: 3788331456483
unloaded kexts:
com.apple.driver.AppleFileSystemDriver 2.0 (addr 0xf02000, size 0x12288) - last unloaded 94521475551
loaded kexts:
org.virtualbox.kext.VBoxNetAdp 2.2.2
org.virtualbox.kext.VBoxNetFlt 2.2.2
org.virtualbox.kext.VBoxUSB 2.2.2
org.virtualbox.kext.VBoxDrv 2.2.2
com.bresink.driver.BRESINKx86Monitoring 5.0
com.pctools.iantivirus.kfs 1.0.1
com.apple.driver.AppleHWSensor 1.9.2d0 - last loaded 31800108689
com.apple.filesystems.ntfs 3.1
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleHDA 1.7.9a4
com.apple.driver.AirPort.Atheros 412.19.4
com.apple.kext.AppleSMCLMU 1.4.5d1
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPISMCPlatformPlugin 4.0.1d0
com.apple.driver.AppleLPC 1.4.9
com.apple.driver.AppleBacklight 170.0.14
com.apple.driver.AppleUpstreamUserClient 3.1.0
com.apple.GeForce 6.0.6
com.apple.driver.AppleUSBTrackpad 1.8.0b4
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.0b4
com.apple.driver.AppleUSBTCKeyboard 1.8.0b4
com.apple.iokit.SCSITaskUserClient 2.6.0
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.0
com.apple.iokit.AppleYukon2 3.1.14b1
com.apple.driver.AppleAHCIPort 2.0.1
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleIntelPIIXATA 2.5.0
com.apple.driver.AppleUSBHub 3.8.4
com.apple.driver.AppleFWOHCI 4.4.0
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleUSBUHCI 3.7.5
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagementClient 96.0.0
com.apple.driver.AppleIntelCPUPowerManagement 96.0.0
com.apple.driver.DspFuncLib 1.7.9a4
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IO80211Family 310.6
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOBluetoothSerialManager 2.2.4f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.7.2fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.7.9a4
com.apple.iokit.IOHDAFamily 1.7.9a4
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.0.1d0
com.apple.nvidia.nv50hal 6.0.6
com.apple.NVDAResman 6.0.6
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.driver.CSRUSBBluetoothHCIController 2.2.4f3
com.apple.driver.AppleUSBBluetoothHCIController 2.2.4f3
com.apple.iokit.IOBluetoothFamily 2.2.4f3
com.apple.iokit.IOUSBHIDDriver 3.8.4
com.apple.driver.AppleUSBMergeNub 3.8.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOATAPIProtocolTransport 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.0
com.apple.iokit.IOAHCIFamily 2.0.2
com.apple.iokit.IOATAFamily 2.5.0
com.apple.iokit.IOUSBUserClient 3.8.5
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IOUSBFamily 3.8.5
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB, SMC 1.16f11
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.4
Bluetooth: Version 2.2.4f3, 2 service, 0 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: ST9320421ASG, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-857E
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x5d200000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
Anyone know what is causing my problems? I thought it was heat so I downloaded a CPU and FAN temperature monitor and the CPU was getting VERY HOT at first so I then ramped-up the CPU FAN SPEED to maximum - it turns out the CPU FAN was not rotating well at low speed - since then I have cleaned and checked the fans and they all work as they should and blow on high(er) when the CPU temperature is above a certain level.

S.U.
Is there a kb article or something that would illuminate what to look for in these logs, or is it a matter of learning by osmosis?
Both. I am not skilled in reading logs. It is a very technical and time consuming task for the uninitiated (me!) In scanning a log I look for the backtrace and loading dependencies. The first item in the backtrace is usually the roadblock.
Beyond that you can look at the Technical Note TN2063: Understanding and Debugging Kernel Panics
Should make for good bedtime reading. Puts you right to sleep.
c

Display Problem with RowHeader of a Scroll Pane

Hi,
I am trying to display row headers for a table using another table
Here is the code
import javax.swing.*;
import javax.swing.table.*;
public class RowNumberHeader extends JTable {
protected JTable mainTable;
public RowNumberHeader(JTable table) {
    super();
    mainTable = table;
    setModel(new RowNumberTableModel());
    setRowSelectionAllowed(false);
    JComponent renderer = (JComponent)getDefaultRenderer(Object.class);
public int getRowHeight(int row) {
    return mainTable.getRowHeight();
class RowNumberTableModel extends AbstractTableModel {
    public int getRowCount() {
      return mainTable.getModel().getRowCount();
    public int getColumnCount() {
      return 1;
    public Object getValueAt(int row, int column) {
      return new Integer(row + 1);
}and then
        JTable displayTable = new JTable(...);
        scrollPane = new JScrollPane(displayTable);
        JViewport jvp = new JViewport();
        jvp.setView(new RowNumberHeader(displayTable));
        scrollPane.setRowHeader(jvp);the problem I have is that when a row is selected inside the row header, some rows go blank and you can see the selection is all screwed up. I tried setting the selection mode to ListSelectionModel.SINGLE_SELECTION but that didn't help.
A refresh of the entire screen (minimize/maximize) seems to resolve the problem. I am using jdk1.4.1 in Windows 2000.
Any ideas?
Sylvain

Again the problem is that when you click on the row headers, some row header rows go blank (completely white) so you can't see what they show.
ie say I have table
Row 1 - 1 2 3
Row 2 - 2 4 5
Row 3 - 5 7 7
Row 4 - 5 6 7where Row X is the row header. So for example, if you click on Row 2, you will get something like
Row 1 - 1 2 3
Row 2 - 2 4 5
      - 5 7 7
Row 4 - 5 6 7until the screen is refreshed or you click some other row header.
hmm ok, I added calling repaint on the table whenever a row is selected and at least the display problem goes away; however, the selected indexes from the event don't always match the index of the row selected. I think actually that may be the source of the display problem.
Here is the code I added in the constructor:
        getSelectionModel().addListSelectionListener(new ListSelectionListener()
            public void valueChanged(ListSelectionEvent e)
                System.out.println("Header table selection is: First = " + e.getFirstIndex() +
                                   " Last = " + e.getLastIndex());
                RowNumberHeader.this.repaint();
        });

Macbook and HP 2510i monitor display problem - help

Hello,
I am having display problem with my Macbook (Intel) and my 25'' HP 2510i monitor via DVI.. Until last monday I do not have any problems and my monitor was working flawless with my macbook.. Last monday I used the monitor with my HP Notebook to try Windows 8 on large screen. And after that try when I connect the monitor back to Macbook there is no display.. I tried the steps below
- I connected Macbook to my Phillips Plasma TV and it worked (no error with display card of Macbook or the wire or the adaptor)
- I connected the monitor back to HP laptop it worked.. (so no error with the monitor)
- I unplugged monitor to cut electricity and tried.. nope not working
- I did several tricks with macbook no effect
- I reinstalled Mountain Lion .. no effect
- I formatted Macbook, reinstalled Snow Leopard.. Not working.. I installed back Mountain Lion .. not working
Whatever I tried the HP2510i is not displaying, mirroring my Macbook..
Any help will be appreciated
Thanks

My graphic card details;
NVIDIA GeForce 9400M:
Chipset Model:          NVIDIA GeForce 9400M
Type:          GPU
Bus:          PCI
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0863
Revision ID:          0x00b1
ROM Revision:          3462

Hp pavilion entertainment pc display problem

Similar Messages

Maybe you are looking for