HP Pavilion g6 1104sx clock error

I have pavilion g6 1104sx, the clock lose time, and the CRT battery change isn't easy in this model of notebook (as in service manual),is there any way to be sure that the error due to battery before changing it?

Hello @kathjal ,
Welcome to the HP Forums!
I understand the computer's cooling system is not working, as indicated by the System Error 90B message. I will do what I can to assist you! To troubleshoot the issue, please try the steps in this HP document: System Fan (90b) error message on startup
This document contains troubleshooting that can resolve the issue, such as cleaning the notebook. These steps could help resolve the issue.
If the issue is not resolved, I would contact HP phone support. The computer may need to be serviced to resolve the issue. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
I hope you find this information helpful. Please let me know if you have any other questions or concerns. Thanks for bringing this issue to the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Similar Messages

X121e randomly wake up from suspended status and real time clock error

Hi all
Previously I considered my x121e suffer from overheating issue and causes real time clock error (RTC). However, after more testing and investigation, I believe the problem is related to other hardware issues and I like to hear people opinion before sending the laptop back to Lenovo.
The machine goes into suspend status either pressing the power button or closing the lid from Windows7 (clean install) without problem. However, it would wake up itself randomly, "beep" twice and screen shows RTC and CMOS checksum error. This happen more often when I am holding the machine (i.e. some movement/vibration). I wonder:
- Is it the RTC battery problem, cause the RTC to wake up the machine?
- Other hardware failure?
The laptop has a clean OS installed/recovered. Latest 1.16 Bios installed. No USB or memory card attached. Ram replaced and not the cause.
Please advise
Howard

Hello,
I am unsure; you would have to contact Lenovo directly and find out how they handle this situation. They may want the ThinkPad X121e back so they can run thorough diagnostics on it, just in case the problem is something else. That way it gets fixed the first time.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Error: 0271: Real Time Clock Error - Check Date and Time settings.

Hello all,
I have lenovo T430s laptop that is configured with Bitlocker encruptions and TPM PIN entry. I don't think that has anything to do with the error msg I am getting but here it is. Error: 0271: Real Time Clock Error - Check Date and Time settings.
Press Esc to continue or F1 to enter setup. I am unable to get into BIOS or even the login screen for Windows 7.
Any advice would be appreciated.

Thanks to everyone for the help. Just want to close this out. I had a IBM/Lenovo technician here today and he replaced the CMOS battery. Upon the change, the computer is fine being reconnected to the dock (the three times I tried it). So it has been resolved with the battery. Surprised by the incompatibility claim because I am not having issues now. Wondering if it's just a USB 2.0 vs. 3.0 thing (and Lenovo trying to sell more peripherals, of course).
Thanks!

Hardware Clocking Error PCI-5122

I tried to run the vi attached (which i've run many times before) and my computer bluescreen. When it rebooted, I could no longer use my PCI-5122 digitizer card. When I try to do a device test or device reset in MAX, it tells me that theres a hardware clocking error.. I was using an external trigger for the aquisition, but don't think I was using an external reference clock. Could someone help me fix this?
Thanks
NI Hardware: PXI-7853R, PCI-5122, PCI-6733, PXI-1036, PCI-MIO-16E-4, PCI-6110
Computer Hardware: Xeon Quad Core - 2.33 Ghz, 8 GB RAM
Software: Labview 2009, Labview FPGA 2009, Vista 64-bit, MAX 4.6, DAQmx 9.0, NI-SCOPE 3.5
Solved!
Go to Solution.
Attachments:
OPO Monitor.vi ‏53 KB

Hi,
This error may be the result of a hardware failure where the only
solution is a repair or replacement. There are however, some basic
troubleshooting steps that have been known to correct this issue
without a return.
Reboot the PC or PXI controller.
Try a different PCI or PXI slot.
Update the driver to the latest version.
If possible try the card on a different machine.
If these steps to not correct the issue then it is likely the
board requires repair which can be arranged by contacting National
Instruments Technical support (in france: 01 57 66 24 24).
Best regards,
Thomas B. | CLAD
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Inscrivez-vous gratuitement aux Journées Techniques : de l'acquisition de données au contrôle/com...

MOVED: Base Clock Error Occured + Shut down every 30 minutes

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=173484.0

I had my motherboard checked by the technicians nearby and found out that my motherboard is a victim of static. Good thing it is still within warranty so they decided to replace it. I have been running my rig for two weeks now and so far neither regular shutdowns nor Base Clock errors were encountered.
My BIOS is still 1.5 and so far I don't have any issues with it.
But just to answer xmad's question:
Is the Ram installed into the 2nd and last DIMM from the CPU?
   Yes, i had this one checked and rechecked
What are the temps during a stress test?
   i forgot.. but it was below 90C
Does the Behavior still occur with a single stick of ram installed into DIMM 2?
   yea, unfortunately

Hardware clocking error # 200550, PCI-5122

The PCI-5122 does not pass the self test. It
says "error 200550 occured. Possible reason: Hardware clocking error
occured". I'm not using any external clock and my PC is 3Ghz pentium
with Windows XP and Labview 7.0. Uninstall/install of NI_Scope and NI DAQmx didn't
help.
By the way, if I put PCI-5911 card instead of PCI-5122 into the same PCI slot, it works fine.

Hello Danraz,
It sounds like you have followed all of the recommended steps for troubleshooting for this type of error. As one additional step you could test it in another PC if you have one available. Unfortunately, you will most likely need to send your board in for repair. Please contact support to make arrangements. You will be asked to provide them the serial number of your board in order to have the board repaired, and they may also verify your troubleshooting steps at this time.
Regards,
Jennifer O.
Product Support Engineer - High Speed Digitizers

MSI XPower OC Genie - Base Clock Error!!

Every time I open CommandCenter I get this Base Clock Error!! Message...
I just used OC Genie (2nd level - RED), and it looks like it can't OC my CPU but still uses the XMP of my RAM, so what gives?
Anyone?

Quote from: Gamtu on 06-August-13, 05:43:24
I had a similar result with IBT. It scared the crap out of me. I think I hit 98c on one core I couldn't hit the stop button fast enough.
I know what you mean. Seeing 90C or more does make one give a double take. I am sure if I would have used IBT at 50X, the CPU would be screaming for life and shutdown to save itself.
Another anomaly I can't explain is when running real world apps and programs for further stability testing at both 47X and at 50X, none of the CPU cores went over 64C at either speed! I can only come to a conclusion concerning this that these CPU's or this platform is really smart and only uses what it needs to do the job asked of it.
Another feature of this platform that I 'really' like is the power saving is still intact even when the CPU V. is taken out of Auto.
I probably better leave the thread as I don't really have the exact same board or components as you and the OP have. My results and experiences with this platform may not be typical or apply to yours for comparison. I will add that as long as the CPU IMC can handle it, the Corsair Dominator Platinum RAM has been outstanding! RAM speed of 2666 @ 50X is not too shabby, but again, all depends on the CPU IMC.

Clock error

Ok. For the past couple days I have been having an issue with trying to get a game to load on my ipod. Every time I go to load it, it comes up with a clock error. Saying that the device clock is incorrect. I have tried adjusting the clock time, power cycling the device, uninstalling the game and reinstalling the game, I have reset the network settings. Everything short of restoring the ipod itself. As I have a different computer now, I will lose everything if I restore to factory.Any help would be appreciated.

Is Settings>General>Date & Time set to Automatic?
Try the following to restore from backup on the new computer and not lose anything
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Real Time Clock Error - Check Date and Time settings, System CMOS Checksum bad

Hello everybody,
Can help anyone to resolve my problem.
I have an Thinkpad W520 (42823FG), BIOS 8BET60WW 1.4 When I disconect AC power and remove battery and connect again, I see this message on screen:
"Real Time Clock Error - Check Date and Time settings, System CMOS Checksum bad
Press Esc to continue or F1 to enter Setup"
Is this a system board problem or CMOS battery problem ?
Thank you

Hello and welcome,
It's probably (hopefully) just the CMOS battery. The easiest way to find out is to just replace that battery.
Page 85 of the Hardware Maintenance Manual:
Hardware Maintenance Manual
Here's an example of the battery. I'm not recommending (or not) this vendor:
http://www.ebay.com/itm/New-Lenovo-ThinkPad-W500-W510-W520-W530-W700-W701-W701ds-CMOS-RTC-Backup-BAT...
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

System Clock Error -- help me

Hello
I'm a new Mac user. I just bought iBook G3 500 with Tiger on it. Every time I turn it on, I see clock error message. "Your computer's clock is set to a date before March 24th, 2001. This may cause some applications to behave erratically." And actually date & time is set at Dec 31, 1969. Of course, I changed the time and date and locked it. But once I turn it off and back on, it happens again. System error?

Between on and off, it was still plugged in. But battery seems totally dead. It doesn't hold any charge at all. Is it the problem of battery?
Another question is about memory and hard disk.
Now I have 384(128+256)MB and I'll have a 512MB stick soon, which makes 640MB. Does it help for performance?
Also I'll receive 40G Samsung MP0402H 5400 hard disk which will replace current 10G 4200 rpm. Will it help performance?
I'll get a fully chargeable battery soon.
Thanks

Computer Clock Error

Hello
I'm a new Mac user. I just bought iBook G3 500 with Tiger on it. Every time I turn it on, I see clock error message. "Your computer's clock is set to a date before March 24th, 2001. This may cause some applications to behave erratically." And actually date & time is set at Dec 31, 1969. Of course, I changed the time and date and locked it. But once I turn it off and back on, it happens again. System error?

HI, Moonhill.
Unlike most other Macs, iBook's do not have a backup battery, which provides a trickle of power needed to retain settings in PRAM and NVRAM, such as system date and time.
iBooks use the system battery, i.e. the main battery, and a tiny capacitor to perform the functions of a backup battery in Macs so equipped. If you briefly remove the system battery and do not have the A/C adapter connected, the capacitor is supposed to retain the PRAM and NVRAM settings for a limited time. If this capacitor has failed — and it can happen on iBooks — then the date/time settings and other values in PRAM and NVRAM will not be retained if you remove the battery and the computer is also disconnected from A/C. In such a case, the computer has to be serviced to replace the capacitor.
I'm not sure if the Apple Hardware Test that should have been included with your computer will test this capacitor, but you can try it: see my "Apple Hardware Test" FAQ for comprehensive advice on using the Apple Hardware Test in troubleshooting, including running the test in Loop Mode.
Otherwise, if there is an Apple Retail Store in your area, I suggest you take the iBook there for examination.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Wait for Next Sample Clock error, or 'How do I put this VI on a diet'?

Hello!
In the attached VI I've been running since June, I have all the functionality I need. No questions there at all, thanks to much time and help from this board!
My nagging problem is that any time I use the PC for other minor tasks other than Labview, it will display the following error:
209802 occurred at DAQmx Wait For Next Sample Clock.vi:1
A search earlier in the month indicated that it could have been a result of my old and outdated PC; I've since replaced it with a brand-new dell dimension 1100. Celeron 2.53ghz with 1.00gb of ram. Should be enough to service Labview and other minor tasks (automatic antivirus updating and also maintenance tasks). However, any time any other program opens or even if the screen is scrolled around on Labview quickly, I get that same error.
Resource usage when idle, with nothing but this VI running is 5-10%, all labview. Upon scrolling the VI, it quickly jumps to the 58-60% and above mark and soon throws that error.
I know that there's a lot of code here that can be cleaner--I know that even though it's functioning correctly, there could be a less resource-hogging way to go about it. Can anyone give me any suggestions on how to make this VI a little 'lighter'?
Thanks so much in advance,
Ralph
Still confused after 8 years.
Attachments:
Currently Running 063006.vi ‏899 KB

Hi Ralph,
The wait.vi waits until the amount of time has passed. While the wait on next ms.vi uses some kind of quotient and remainder on the computer time until the remainder passed zero.
In this way you can synchronize 2 loops, and somehow it is less time-consuming. The only difference you will see is in the first run!
There you see a smaller amount of time:
Message Edited by TonP on 10-04-2006 04:21 PM
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Attachments:
Example_BD.png ‏2 KB

HP Pavilion dv6-7080se recovery error

when i run recovery a message apper to me and say :
windows faild to start a recent hardware or software change might be the cause to fix the problem :
1 - insert ur windows instllation disc and restart ur computer
2 - chosse ur language settings and then click next
3 - click repair ur computer
if you dont have this disk contact ur system adminstrator or computer manufacturer for assistance
file : \boot\bcd
status :0xc000000f
info : an error occurred while attempting to read the boot configuration data
to ur aknwolage
the drive ot the recovery i see the data in it
an the hidden drive hp tools i see it
and i but a recovery in a flash memory and i cant boot from it and i see it as files not a revovery disk
my operating system is windows 7 64 home prem my laptop HP Pavilion dv6-7080se
what i can do to make my recovery work

Hi durani,
You're best option would be to order a complete replacement set of Recovery Discs using the link below.
Order HP Recovery Discs.
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP Pavilion dv6500 recovery system error 0x400100200001005

Hi, I have HP Pavilion dv6663cl notebook and the drive broke. It can not be recovered thus I replaced with new retail drive.
I run the recovery system from dvd but failed at 51% and gave the error 0x400100200001005. I tried several times but it always failed at 51% and same error.
I run hdd diagnostics from bios and the new hdd passed.
The recovery dvd was created with the original hdd. I used it before and it was successful to do recovery on the original drive.

Two possible causes.
1-Is the new hard drive at least as large a capacity as the original? Can be larger but not smaller.
2-Is the new hard drive an Advanced Format hdd-usually stamped with AF on label.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

No Internet conectivity/clock error when installing FB4.7 (trial)

I follow these steps:
Install as trial-> (License) Accept -> Sign In Required (Click Sign In) [here I get the error: "Please connect to the Internet and retry: Either your computer is offline or the clock on your computer is set incorrectly"]
I've tried the "Connect Later" option that continues the installation procedure until the end, but when I try to open FB4.7 I get stuck at exactly the same point; it asks me to sign in and I get the same conectivity error.
Any ideas?

Hi Srikishan,
Thanks for your fast answer.
I installed MaxDB DMB GUI from the directory: \NWABAPTRIAL70206_64\MAXDBTOOLS
and logged in with username u201Ccontrolu201D and used the password I gave in the installation.
This was new for me and I learned something new about database management. Thank you for that.
I solved the error but it was just a really stupid mistake from me.
A friend told me once that when installing Netweaver I have to put the date in the future so that the license wonu2019t expire . So before I installed Netweaver I set the date to 2099.
That was the problem, when I didnu2019t do that then there was no error message.
Again thanks for helping.
Regards, Robin
Edited by: Robin Vleeschhouwer on Oct 28, 2011 10:01 AM
Edited by: Robin on Oct 28, 2011 10:01 AM

HP Pavilion g6 1104sx clock error

Similar Messages

Maybe you are looking for