HP Pavilion G6-1113eo webcam not working

Hello,
I have a HP Pavilion G6-1113eo with Windows 7 and the integrated webcam stopped working just a few weeks after I bought it. I have several times tried reinstalling and updating the driver program (cyberlink youcam) but nothing seems to help. What should I do? Cyberlink can't find the webcam at all. The Youcam program is not so important to me, if it is easier to get the camera working without it.
So what to do? I wouldn't like to do a recovery of Windows as I feel it could happen again at any time.

Sounds like the hardware has failed.
If your warranty was still valid it should be replaced.
If not, if you don't fancy replacing it yourself (eBay), just buy a USB webcam is probably the handiest.

Similar Messages

My pavilion dv6 3150 webcam not work !

hi
yesterday i went to used webcam in yahoo messenger like past days but it's not worked
i uninstall my hp webcam driver and i install it again but its not work yet
when i use hp mediasmart button on my keyboard and choose webcam it's do nothing
help me plzzzzzzz
i really need this

u just need to update BIOS from Hp.com/support
***Click on “Kudos” STAR to say thanks!***

HP mediasmart webcam (not working)

Hello. I've a Hp pavilion dv6 2150 us.
The problem is the next one: My webcam works fine, but not all the time... Sometimes it doesn't work and show a message that says ''no webcam detected, try plugin in a webcam into your computer now. If you are using an integrated webcam , make sure that it is turn on''
Of course im using an integrated webcam. and it is turned on, enabled an all. I've Updated my webcam, download other versions of the driver, unistalled, installed back, used recovery system, looked for others drivers for the hp pavilion dv6 2150 us. But it keeps doing the same. One moment is alright, at other moment it lost the device ...
What can i do? it is really anoying and not useful at all if when i need to use the webcam it is not detected.
Specification: HP pavilion dv6 2150 US, 4 gb memory ram, windows 7 ultimate 64 bits,

Hi @rajeshomtri ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dm4-1162us Entertainment Notebook and issue with the WebCam not working correctly. Here is a document on troubleshooting the WebCam for Windows 7.
If that does not help I would uninstall the drivers and software.
Hope this help you out.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Microphone and Webcam not working/Webcam not recognized by YouCam

Hello,
I have a dv7-6c95dx and my YouCam program tells me that it does not recognize my integrated webcam. I have read all of the webcam forums on this site and clicked on all of the links people have posted in the forums. I have uninstalled the CyberLink YouCam program and it still comes up with the same messages. The webcam also does not show up in my device manager. The microphone is malfunction as well, it will not work any any programs including skype.
I have heard that the webcam can come unplugged internally, will that also cause the microphone to stop working? I have run out of options and I do not want to pay anyone to fix it. I would appreciate any advice on this subject.

Hi DillOrNoDill,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion dv7-6c95dx Notebook and sound and microphone issues and Webcam not working correctly. I would be happy to assist if needed. Try these steps first.
1. Right click speaker icon (right hand corner)
2. Select Playback devices
3. Right click Speakers
4. Enable it and set as Default
5. Click Apply/Ok
You could also try Microsoft troubleshooter located on your Notebook.
Here is a document on WebCam troubleshooting. The Webcam will be listed in your device manager under Imaging devices. You should be able to click the action button and scan for new hardware.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

I have a MacBook Pro Retina display: 15.4-inch late 2015 with OS X Mavericks install, only on second week.
Insight works on FaceTime, Skype, but yahoo program does not show insight cam in dropped down.
Now when I got my new MacBook Pro, I down loaded all new Skype (worked tested), FaceTime (Worked Tested), Yahoo (not worked)
Fix:
With the new Maverick you have to use there messager program Version 8.0 (4218). Once I add my yahoo account video works again.
It also supported AOL, AIM, Google Talk, Jabber.
Guess I miss it frist time... hope this helps...

Webcam not working

Hello, not surewhere to post this but i have the hp g42 475dx and i recently reset it. Everything else works fine but the built in webcam will not, im more than likely missing a driver, and it doesnt pop up in device manager. Hp wants me to pay them 60$ to fix it so im hoping someone else can help! please help! thanks.

Hi @AlexJakubiak ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue on your HP G42-475DX Notebook PC and the Webcam not working. Here is a document on how to troubleshoot the Webcam and the software. It shows you how to test the Webcam.
Here is a link to troubleshoot the WebCam and it does include some steps to take when it is not seen in the device manager.
Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system. Here is a link to the YouCam software if you need it.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP Pavilion Volume Touch-Pad NOT WORKING | NO SOUND HELP

HP Pavilion Volume Touch-Pad NOT WORKING
I have an HP Pavilion dv3t - 2000, Windows Vista computer.
SOMEONE DID ALREADY HELP ME HERE WITH THIS PROBLEM BUT THEY STOPPED RESPONDING | Please check that link out!
The volume touchpad above the keyboard is not working properly (There is no sound coming out of the speakers or the headphone jack) , If you touch the megaphone part of the touchpad above the keyboard then it stays red, however the sound icon on the taskbar changes from mute to unmuted when you touch the red megaphone. The volume slider on the touchpad works suprisingly.
I don't know if I uninstalled something or what but I need this problem fixed!
Thanks!

Hi,
Shut down the notebook, unplug the AC Adapter and remove the battery.
Follow the procedure detailed on Page 63 of your Maintenance & Service Guide to remove the RTC battery. Hold down the power button for 30 seconds.
Leave the notebook for 10 minutes and then re-insert the RTC battery, re-assemble and replace the cover, insert the battery, plug in the AC Adapter and start the notebook. Tap away at f10 as soon as you start the notebook to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
If you still have no audio and the installer you downloaded previously still doesn't detect the Hardware, it would start to look like a Hardware failure, but to try and rule out any further software cause, try the following.
Follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run. The 'Try it' option runs the OS from the CD without the need to install on your HDD. If this runs Ok ( it will be slow running from a CD ) and you still have no audio output, this would tend to confirm a Hardware issue.
http://www.ubuntu.com/desktop/get-ubuntu/download
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP Pavilion Volume Touch-Pad NOT WORKING | NO SOUND

HP Pavilion Volume Touch-Pad NOT WORKING
I have an HP Pavilion dv3t - 2000, Windows Vista computer.
The volume touchpad above the keyboard is not working properly (There is no sound coming out of the speakers or the headphone jack) , If you touch the megaphone part of the touchpad above the keyboard then it stays red, however the sound icon on the taskbar changes from mute to unmuted when you touch the red megaphone. The volume slider on the touchpad works suprisingly.
I don't know if I uninstalled something or what but I need this problem fixed!
Thanks!
This question was solved.
View Solution.

Hi,
Shut down the notebook, unplug the AC Adapter and remove the battery.
Follow the procedure detailed on Page 63 of your Maintenance & Service Guide to remove the RTC battery. Hold down the power button for 30 seconds.
Leave the notebook for 10 minutes and then re-insert the RTC battery, re-assemble and replace the cover, insert the battery, plug in the AC Adapter and start the notebook. Tap away at f10 as soon as you start the notebook to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
If you still have no audio and the installer you downloaded previously still doesn't detect the Hardware, it would start to look like a Hardware failure, but to try and rule out any further software cause, try the following.
Follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run. The 'Try it' option runs the OS from the CD without the need to install on your HDD. If this runs Ok ( it will be slow running from a CD ) and you still have no audio output, this would tend to confirm a Hardware issue.
http://www.ubuntu.com/desktop/get-ubuntu/download
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

USB devices and Webcam not working or installing on Pavilion Laptop

Hi there,
I have a HP Pavilion Dm3 1030 sa,
For a while now certain USB devices have just not worked on the laptop, specifically printers and mice, despite me reinstalling the drivers for those devices on the laptop. I tried the devices on other computers and they worked fine.
This was annoying but I put up with it.
Now the webcam and microphone have stopped working and are no longer recognised by the computer. I have reinstalled the webcam software but cannot find the drivers for it. The software (arc soft webcam) says the inbuilt webcam is not connected.
I have been able to get my iphone to connect via usb and usb drives work most of the time. I don't really know what is going on. When I look at devices that don't work in device manager It says that there is a USB I/O error. I have tried reinstalling the drivers using device manager but that didn't work either. Any advice would be appreciated. Not being able to use a mouse is annoying as track pads are slow.
Pn vj409ea#ABU
Is my notebook in the warranty period? No (three months out)
Is the originally installed OS still installed (Yes)
Have I changed the partitions (NO)
Thanks for any help
Kieran Latham

run an extended _*Apple Hardware Test*_.
JGG

Yoga 2 Pro: Webcam not working with Skype?

Hi all, weird problem. For some reason skype cannot load the webcam built into the Yoga 2 Pro.
It works in the Windows 8 camera app just fine.
I formatted and everything and it will just not work.
IT WAS WORKING two days ago, that's why I'm so confused. I've installed the drivers on the support page and have had 0 luck.
I'm not sure if this is a permission thing or what..
Any help is greatly appreciated.

Unfortunately I've reinstalled the driver after uninstalling it from the device manager 10 times. I also formatted and reinstalled, but that didn't fix anything.
The camera works for the camera app + the webcam test online. I've tried rollback on the drivers, and installing earlier versions of skype with no luck.
Very strange, all it does is show the loading sign, and never loads.
This is the desktop version of skype btw. I'm going to try it with the non-dekstop version tonight and see if it works.
EDIT: Is there any other camera source besides 'Lenovo EasyCamera'? Their are two drivers on the drivers page, which one is recommended?

Satellite L300-215 - Webcam not working

The webcam on my Satellite L300-215 has not worked since I downloaded the new Toshiba software months ago.
The Chicony webcam is not even recognised and it will not install the Toshiba software.
Two hours with Toshiba technical staff, including them having remote access to my computer, did not solve the problem.
It seems this is a very common problem and I have tried some of the suggestions on postings but with no result.
Does anybody out there have the answer?

I have two Toshiba notebooks, Satellite P200D and Satellite A300, both with webcam and everything works well. So I don't agree with statement about very common problem.
Does webcam works well if your notebook is preinstalled with Toshiba recovery image (factory settings)?
>I have tried some of the suggestions on postings but with no result.
What you have tried to solve this?

Problem with Macbook Pro early 2011, webcam not working in any apps and windows 7 or 8 on bootcamp, keyboard backlight not working?

Hi Guys
I recently bought a second hand early 2011 Macbook Pro 15 inch and are having 2 problems. The first is that none of the apps detects my webcam at all, the second is, i have Windows 8 installed on bootcamp but are unable to get the keyboard backlight to work in 7 or 8. The backlight works perfect in os x 10.8.5 though. I need a little bit of help guys.....

Go to Apple Menu / About This Mac. Click on More Info ... next on System Report. In the left hand column, under Hardware, select USB. The right side will show the USB Device Tree. Look through that and check for "Built-in iSight". That is your camera. If it is not listed the camera is not working.
For backlighting, try this: go to System Preferences / Keyboard. Uncheck "Adjust keyboard lighting in low light".

Satellite L450D Webcam not working after new installation without recovery

Hi there,
as posted in the thread title I have a problem with the integrated webcam of a customer notebook. Two days ago the operating system of this laptop was damaged by a virus and needed to be re-installed. I tried to install it with the recovery partition, which did not work. After it I tried to re-built it with the dvd I burned from the recovery partition with the same result.
The only thing that worked was a clean install with a windows 7 64 Bit retail dvd and the key printed on the sticker of the laptop. I managed to get everything working again except one part - the webcam.
No driver installation, bios update and re-installation worked to get this part to work.
Did anyone of you know this problem and have a fix for me?
Thanks in advance.
Greetings Saphire
P.S.: One thing shall be also important. When I look into the installed devices manager the driver for the webcam is listed as usb webcam and the manufaturer of it is Microsoft.

Hi
I dont think that this needs to be fixed because I dont think its hardware related issue.
I think there is something wrong with the software on your notebook.
I mean everything worked perfectly until virus has damage the OS. Right?
You said this:
>I tried to install it with the recovery partition, which did not work. After it I tried to re-built it with the dvd I burned from the recovery partition with the same result.
I really wonder why you could not get this working using Recovery disk.
So possibly this is the key to this issue
On the Toshiba European driver page I could find Registry Patch v1.1 For Win 7 64bit
Also webcam driver v 1.1.1.4 is available there
I think the OS is responsible for your issue possibly some patches are applied or similar

Webcam not working with adobe air

hey frnds,
i'm trying to capture webcam snaps and storing it on local desktop.
Below code of capuring snap is working with flex but same code not working in adobe air.
I'm using Adobe Flash builder beta 2
is any setting is required to use webcam with adobe air?
i'm using following code
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
                       xmlns:s="library://ns.adobe.com/flex/spark"
                       xmlns:mx="library://ns.adobe.com/flex/halo" creationComplete="init();">
    <fx:Declarations>
        
    </fx:Declarations>
    <fx:Script>
        <![CDATA[
            import mx.controls.Alert;
            import mx.core.UIComponent;
            import flash.media.Camera;
            import flash.media.Video;
            private function videoDisplay_creationComplete() : void
                var camera:Camera = Camera.getCamera();
                if (camera)
                    videoDisplay.attachCamera(camera);
                else
                    Alert.show("Oops, we can't find your camera.");
            private function capture_click() : void
                var snap:BitmapData = new BitmapData(320, 240, true);
                var snapBmp:Bitmap = new Bitmap(snap);
                snapBmp.width = 320;
                snapBmp.height = 240;
                if(snapshotHolder.numChildren > 0)
                    snapshotHolder.removeChildAt(0);
                snapshotHolder.addChild(snapBmp);
                snap.draw(videoDisplay);
    ]]>
    </fx:Script>
    <mx:HBox>
        <s:Panel title="Video">
            <mx:VideoDisplay id="videoDisplay" creationComplete="videoDisplay_creationComplete();" width="320" height="240" />
        </s:Panel>
        <s:Panel title="Snapshot">
            <mx:UIComponent id="snapshotHolder" width="320" height="240" />
        </s:Panel>
    </mx:HBox>
    <mx:HBox>
        <mx:Button label="reload camera" click="videoDisplay_creationComplete();"/>
        <mx:Button label="capture" click="capture_click();"/>
    </mx:HBox>
</s:WindowedApplication>
Camera is connected but cannot see anything inair,
plz guide me in this.
thx in advanced,

I seem to have the same problem. When creating an web application it works fine, but when creating a desktop application it doesn't. I can't figure out what the problem is.
Does anyone know?

Why does my webcam not work with Skype - can anyone help?

Why does my webcam on Mac Book air not work with Skype - can anyone help?

Did you set the Skype Audio/Video preferences to use the camera?

HP Pavilion G6-1113eo webcam not working

Similar Messages

Maybe you are looking for