HP PAVILION G6-2229TU LAPTOP HDD NOT DETECT WHILE OS INSTALLATION

Sir
I have hp pavilion g6-2229tu laptop, i am formate and reinstll operating system win7 but hdd not detected while installation select the driver to be installed page are come not showing hdd how to install os, pls help us

Restart windows setup and see if your problem was solved
If your problem doesn't solve after restarting your pc then on the select drive to install windows page press
Shift key + f10 then now Command promopt was opened then type "Diskpart" Now new window was open then type "List disk"
Now If there you will see your Hard disk drive then try the following
type "select disk 0" (0 is your disk number replace 0 with your disk number as shown in window)
now type "clean" Please note Clean command was format your hard disk completely with recovery drive Now type "convert to MBR"
now try to install windows again and see your problem was solved
Enjoy

Similar Messages

TS2776 I recently bought iPad 3 but iTunes on my Win XP laptop is not detecting the iPad and i am not able to transfer music to it.

I recently bought iPad 3 but iTunes on my Win XP laptop is not detecting the iPad and i am not able to transfer music to it. I tried again after downloading iTunes 10.6.1.7 and it said it's not compatible with the XP version.

I would recommend you try downloading iTunes for Windows 10.6.1 from this website for your XP based computer:
http://www.techspot.com/downloads/70-apple-itunes-for-windows.html
Hope this helps

Laptop does not detect the new HDD

Good afternoon ladies and gentlemen Gameday! I need help.
On my laptop broke down the hard drive. According to reports, a lot of bad sectors, SMART. Decided to put a new HDD. Laptop does not see the new hard drive. In the BOOT MENU new hard drive is not detected.
Old hard drive while still runs in the BOOT menu displays all 3 sections. On the new disk interface is similar to the interface connection on the old disk.
laptop model: 15-e 051 sr.
OS: Win 8
manufacturer of the old hard drive : Hitachi
new hard drive: seagate.
New hard drive on another system checked for operability.
Also, the laptop refused to work with other hard drives: Samsung, Hitachi.
I am sorry for your Books English. For transfers using Google translator.
I look forward to qualified support, despite the language barrier.
Sincerely Sqwosh.

Hi @sqwosh ,
Thank you for your query, I will do my utmost to assist you.
First I would like to let you know that the broken English is not a problem. I understand that Google translation can be a a little rough in the translations. We will work together and I am sure we will do fine!
I grasp that you are trying to replace the hard drive but it is not being recognized in the bios.
Here is a link to the HP Pavilion 15 Notebook PC Maintenance and Service Guide. please note page 57 for a list of supported hard drives. It will also provide information on removal and replacement of the hard drive.
You could also try this.
Once you have the hard installed and connected and you are at the bios screen, you will notice an option to restore defaults along the bottom. ( I believe it is F5) . This will cause it to scan for the hardware and hopefully find your new hard drive.
Please do not hesitate to respond if you require further assistance and good luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Pavilion dv6929nr laptop - Webcam not detected

Pavilion dv6929nr (part number: FN553UA)
Windows 7 Home Premium 64b
After clean install of Win7, webcam is not detected by operating system. Chipset drivers already installed. Intel Mobile 965 detected and operating correctly. Smartcard reader detected and operating correctly. Attempted to install YouCam software from HP support; could not detect the webcam.

You need to replace the webcam. They go out frequently.
http://www.ebay.com/itm/HP-dv6000-dv6700-WebCam-/330759722326?pt=LH_DefaultDomain_0&hash=item4d02d0d...
http://www.ebay.com/itm/HP-Pavilion-15-4-dv6000-Original-Web-Cam-Web-Camera-with-Cable-GLP-/25109918...
Post back if you need detailed replacement instructions.

External Hdd not detected

Hi guys,
I've got this issue where my Macbook Air cannot detect my external hdd (not showing up on disk utility), where as my Mac Mini can. I assume it's a software issue. Both are running OSX Mavericks (Latest edition) and there is nothing wrong with my USB port in the Air (detects my mouse, flash drive etc.).
The hdds' LED no longer flashes when plugged in the Air but functions fine when plugged in the Mac Mini.
Is there any manual reset command (through Terminal) or setting in the Macbook Air without having to factory reset?
Thanks in advance for your help!

If the hard drive is bus powered (it doesn't have an independent power supply) the MBA may not be supplying enough power to the drive. This isn't an uncommon problem. I have a cheap external at work with this problem which I solved by plugging it into a powered USB hub instead of directly into the computer. Had that not worked I'd have tried finding an external power supply for the drive - or junking the enclosure.

Pavilion dv4-1241tx wwan device not detected in win 7.Is there any wwan device at all?

My pavilion dv4-1241tx can not detect wwan device when installing hp connection manager in windows 7.. pls help

Some of the DV4-1000 series does support WWAN and some of them dont. Install drivers from here and check if WWAN module gets detected in Device Manager under Modems
Also, Refer below link for more info
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01712976&lc=en&product=3769214#N62
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Upgrading HDD - Not detected

Hello!
I bought a 640GB WD Scorpio Blue HDD from NewEgg for myself for Christmas (:-) and a copy of Snow Leopard, all of which going into my 15" Early 2009 MacBook Pro (No SD Slot). Installation (physical) was a breeze except for the fact that the new HDD does not have the supports sticking out like the original factory HDDs. Therefore, it does not fit properly. That was easily fixed with some folded up electrical tape for the time being. Anyway...I ran the installer and selected restore from Time Machine Backup. I had my external HDD already connected, and it detected it. It took a while to detect the size of the backup (310gb - full HDD) and then it wanted me to choose my new HDD. PROBLEM! My HDD did not show up in the list. I then put my old HDD back in and put the new one in an enclosure to see if it would show up that way - no dice. I went into Disk Utility to see if it was there - No dice. No matter what I do, my computer will NOT detect the HDD. Apple Tech Support was no help - they said to call WDC. I thought of formatting the new HDD, but I can't because it is not detected. What should I do? Please help!
Thanks!
Ross

Apple Support can't help you.
Have you looked at the trouble shooting info on the Internet? For example, you need to be certain the jumpers are correctly set (see http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?p_faqid=3656&pcreated=#jumper )
I'm sure that are lots of other possible problem areas. You should contact NewEgg for technical assistance.
I thought of formatting the new HDD, but I can't because it is not detected.
If you ever get it working, this is the FIRST thing you will need to do. It comes formatted for Windows 7

Laptop is not detecting wireless router

Thanks in advance for any assistance.
Equipment:
Gateway 450ROG
Intel PRO Wireless LAN 2100 3B
Linksys BEFW11S4 Wireless Router
SSID is enabled
Channel 1
I bought the laptop used and I upgraded it to WinXP SP2 and now it is not detecting any wireless nteworks. There doesn't appear to be an exteranl switch for the radio on the laptop. All drivers have been upgraded to their latest version. I was able to do this via a wired connection.
Help. Thanks.
Darrell-

Right Click on Intel Utility on the Tool-bar Try .... click use windows to configure the wireless settings ....
Go to start >> run >> type "services.msc" (without quotes) >> Under that list ... look for Wireless Zero Configuration >> Go to properties >> Use Start up type as Automatic .>> Click Apply & OK ....
Go to wireless network connections .... under view available wireless networks .... see if you are able to get your home network or not ...
Try to connect to it ....

Sata HDD not detected in BIOS in K8MM-v

Hi!!
I have an AMD (athalon 3000+) plateform K8MM-v(vial K8M800-CE+VT8237R chipset) having two problems
1. NIC doesn't work properly, I inferrred it because the same setting of TCP/IP are working for other system but not for me. Windows always shows Restricted or limited access at nic status.
2. SATA HDD is not Detected in BIOS.
System is running with XP Prof. having ram 512MB.

Loading SATA drivers will not make the drive appear in the BIOS
Without knowing what hard disk he has, I can only speculate it is a SATA-II 3gb/s drive, which rarely work with the VIA VT8237/R chipset. You can try jumpering the drive to SATA-I 1.5gb/s mode, but there's still no guarantee it will work.

L520 second HDD not detected by BIOS, why?

Hi everybody
It appears Schalli and I have same problem: a second hard drive (inserted in an aftermarket caddy) is not detected by BIOS. So you can not boot from 2nd hard drive.
But, if you start the OS (Windows or Linux or even DOS!), the second HDD is seen and works perfectly (no connection issues, full speed etc).
I tried several HDD, also SSD. Also tried removing internal HDD, leaving only HDD in the caddy.
BIOS is 1.20.
Can other users please verify?
Lenovo: why is this? Why doesn't BIOS detect the second hard drive?
Thanks!!!

Same with my machine. So I put my SSD into the original drive bay and moved my HD to my caddy.

HDD not detecting

Hello! My SATA WD Caviar Green with SATA&IDE USB 2.0 Cable not detecting in Windows 7. I can see "DISK 0" in Disk Manager and when i trying initialize "DISK 1", i recieving a message "Device not ready ". Does anyone any ideas?

have you set-up "jumper" settings? ( master/slave )
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-42470
ps: make sure your secondary hard disc is working.

SATA HDD not detected in Bios K7n2 ILSR

Hi! I have a MSI K7N2 Delta-ILSR and I just bought a new hard drive (sATA) but it is not recognized in BIOS. There are no options to enable sATA mode in the bios and I couldn't install WinXP even after loading the driver (by pressing F6 on the setup). The only way for me to install WinXP is by setting up CTRL-F and setting up an array for RAID BUT even after installing WinXP via RAID, the sATA drive is still not detected in BIOS. Is there any way that I can use the sATA drive without having to RAID it? Hope you guys can help me...Thanks!

Promise SATA/RAID controller on this board is a seperate chip, so BIOS has nothing to do with it.
to use a single SATA drive on this board, press Ctrl+F to set up a striped array and add the single drive to it, install Windows onto the drive, making sure you press F6 when prompted to use the Promise driver on the floppy disk

USB and external HDD not detected by OS X

Hello.
Since last few months, whenever I plugin a USB pen-drive or an external hard disk, it seems at first that the system has not detected the disk, since nothing shows up in the finder and there is no way to access the disk also. The disk connection is complete since the lights turn on immediately.
When I remove the disks from the port, I get a message that I should first eject it and then remove the disk, which is not possible because I CANT SEE THE DISK ANYWHERE.
Now I plugin the disk the second time and IT GETS DETECTED.
I have to do this with every external storage disk EVERY SINGLE TIME.
Someone please help me find a solution to this problem.
Thanks.
Sankalp

Hi James,
The USB hub will not function on a non-Apple branded monitor without connecting a USB cable from Type-B USB port on your monitor to one of your mac's Type A USB ports. The USB host bus should be beside your Display Port output on the monitor. Generally, a Type A to Type B USB cable will be included with your external monitor.
Hope that helps.

160gb SATA not detected while 80gb SATA is working fine

I have a MSI K8MM-V board with AMD 2800+, I am alredy using a 80gb SATA1 drive, I recently purchased a 160gb SATA1 (seagate) however, to my surprise the disk is not being detected in the BIOS and even when I suply the drivers during windows xp installation, the system is not able to detect any hard disk attached, can somebody please suggest me what to do now, is my board in-compatible with disks with such high capacity
system spec:
AMD 2800+
VIA K8MM-V
512 RAM
80gb SATA(working)
160gb SATA(not detected)

Quote from: Tiresmoke on 03-June-06, 04:14:52
Surv1v0r don't be so hasty next time to RMA. Many times it is something simple like this that gets the job done.
Fair comment - sorry, you guys were right and I was wrong - no excuses.
jatin_bhasin - from Wikipedia :
SNAFU - Situation Normal: All F***ed Up
FUBAR - F***ed Up Beyond All Recognition/Repair/Reason/Redemption
Quote from: mrbadnback
I have read on WD website and on the website where I bought my WD HD and they had lots of people return the HD's just because they didn't know about the jumpers.
You do wonder whethere WD (and others) will learn anything from this. RMAs can't help anyone, perhaps a little guidance on the casing or an installation sheet would help to resolve some of these ?
Once again - sorry

Laptop Harddisc not detected.

Hello,
My laptop HP pavilion g4-1020tx show a SHORT DST test failed. Its not in warranty. Tried to connect the hard disc to the desktop by USB port. It was detected for some time and then stopped. It could not be read. There is some data in the hard disc which need to be recovered. Is there any other option? Can that be got done from some where else. Please help.
Regards
SOH

Hi SOH,
Thank you for visiting the HP Support Forums and Welcome. The error code for the short Disk Self Test ( DST ) would indicate that the Hard Drive is failing and needs to be replaced. How long were you getting the error?
Try removing the USB cord and restarting the computer. Once it is up and running then put in the USB cord.
If it opens you need to copy your files as the HDD is on its way out.
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP PAVILION G6-2229TU LAPTOP HDD NOT DETECT WHILE OS INSTALLATION

Similar Messages

Maybe you are looking for