Hp pavilion g6 2271sx bluetooth driver not installing

Hello all.
I have Hp Pavilion g6-2271sx Notebook
Product Number: C5B56EA
I tried too much to install the bluetooth driver but I can't find.
I tried some of them but it gives me error in the installtion or some time windows operating system restarts, give message "not accurated driver"
Please give the solution of this error.
thanks

Hi:
You install the corresponding bluetooth software and driver for the model wireless card that is installed in your notebook.
For example...
If you have a Ralink wireless card, you install the Ralink bluetooth software and driver.
If you have an Atheros wireless card, you install the Atheros bluetooth software and driver.
etc.

Similar Messages

  • Hp Officejet Pro 8600 on Windows 8.1 driver not installed

    Using Windows 8.1 and HP Officejet pro 8600.  The printer is installed on a wireless network.  But on Device Manager, it says "driver not installed".   Most printing tasks are successful, but for some I need to have the driver installed on the computer.  I have tried troubleshooting, but am unsuccessful.  I would appreciate help.  Thanks

    Hi emax,
    Print a configuration page to get the printer's IP address. Printing a Network Configuration Page.
    If you have a valid IP address for the printer then try and access the Embedded Web Server for the printer.
    Type the IP address into your web browser's address bar. (Internet Explorer)
    If it loads the printer's network page then the printer is on the network.
    Power cycle the router, computer and printer.
    Try printing again.
    If the issue persists, add a new device if the IP address is valid.
    Right-click the Start button () or the lower left corner of the screen, and then click Search.
    In the Search box, type HP, and then click the icon for your printer. The printer software opens.
    Click Utilities, and then click Printer Setup & Software Selection.
    Click Connect a new printer.
    Test the printer over the wireless network.
    Please provide the following information so I can assist you better.
    What is the printer's first 3 sets of numbers for the IPV4 address?
    Could you access the printer's EWS?
    Were you able to add a new device?
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How to deal with the "driver not installed" message?

    My issue, and it seems many others here have it too, is how to install a printer driver in the face of the "driver not installed" message.
    In my case, it's an HP4160 Rendevous printer. I've deleted the com.apple.print files in the Library, reinstalled the software, made sure that BDC package, or whatever it's called is installed, even downloaded and run the printer fix software from Fixamac.
    Nothing works.
    I have the feeling this isn't a printer or driver-specific issue, but is an OS problem. Does anyone have a suggestion?

    It appears the Deskjet 4160 will not work with an Airport. Connected via USB, the driver installs normally and the the printer appears to run just fine, although I haven't done much with it yet.
    It simply will not work on a wireless network through an Airport. Frustrating, but workable by bringing the laptop to the printer.

  • TCP / IP Protocol Driver - not installed (using Windows 7 Home Premium (64 bit) Service Pack 1

    I am using a ThinkPad T520 laptop.  Lenovo Solutions Center keeps referring me (with a yellow exclamation mark) to the Device Manager and alerting me to a "non-critical" error. The message is "TCP / IP Protocol Driver - not installed".
    I have found numerous pieces of advice for Windows XP and Vista - but very little for Windows 7. I have however tried the Microsoft "Fix it" solution and it had no effect.
    I am still able to connect to the internet via Ethernet cable and wifi. It is however worrying that the warning keeps being raised.
    Does anyone know how I can fix it?

    Hi Tripplec.
    Thanks for the reply. I am away from home at present without my ThinkPad, so will try it at the weekend. I am an experienced computer user but this is a brand new machine and I have never had a laptop that produced error messages without providing any suggested fixes. It seems that Lenovo is not suitable for ordinary home users, but only for computer engineers. Sadly that is not me... so before I plunge in, can I just check some details?
    1. You suggest removing the offending network adapters in device manager. Which are the offending adapters that cause a TCP/IP protocol driver error?  I am nervous of removing the wrong things and making it worse!
    2. You also suggest that I go to Network Connections via Control panel, properties of adapter, Install and select the desired Protocol(s) and install them.  Is that an alternative fix  to 1 above - or an essential follow-on after removing the offending adapters?  (Last week I searched the machine and the Lenovo support page of drivers - and never found a TCP/IP protocol driver. If you know where one can be found, I would prefer to instal a new driver, rather than delete other devices and hope that the machine reinstalls them later!).
    Much obliged for your assistance.
    Fillet

  • Problems adding USB printer - "Driver not installed" - but it is

    Apparently, 10.3.9 has some problems with USB printers. For the record, I had already installed this earlier prior to the upgrade and everything worked fine - but due to crashing due to a faulty power supply - I've had to re-configure everything.
    I, and many others in this forum, have found a strange problem when trying to add a printer (And yes, other people have asked about this but I haven't seen any answers at all that are useful. The only possible solution seems to be "upgrade to 10.4" and that is unacceptable. Does Apple check these forums?).
    After clicking "add printer" in the utility, the software finds the correct printer (so obviously the physical connection to the printer is OK) and displays it with a question mark over it's icon and "driver not installed" next to it. I can't select this image or text.
    After searching for a couple of minutes, a dialogue box pops up saying "New drivers detected. Do you want to reload the browser?" (I assume the printer setup utility is the "browser"?).
    I click yes and nothing happens. No PPDs show up in the list. This happens when I select USB as well as Apple Talk from the printer-type pull-down menu.
    How can I start printing again?
    iMac G5 17" Mac OS X (10.3.9)
    iMac G5 17" Mac OS X (10.3.9)
    iMac G5 17" Mac OS X (10.3.9)
    iMac G5 17" Mac OS X (10.3.9)
    iMac G5 17" Mac OS X (10.3.9)

    First, welcome to the discussions.
    For the record, Apple does not normally respond to these Forums.
    You mention (Due to Crashing) Whenever you have an issue with your machine it can disrupt in almost any area, and is normally caused by SOMETHING.
    As of right now it would appear you might be chasing your tail.
    When you choose to upgrade your Operating System there is No Guarantee that your Printer and it's drivers will work on another completely different Operating System.
    Your best bet at this point is to drag all of your printer related folders to the trash, empty your trash, and plug your USB Printer (What KIND) into your machine directly.
    Shut your machine clear OFF for a minute or so and do the same to your printer, pull the power adapter from it.
    Now plug in your printers Power Adapter, Plug in the USB to your Printer to your computer and restart it.
    Take the Disc that came with your printer and re insert it and download the Installation Folder and any utility folder that may come with it.
    After you have done this don't try to print, Go directly to your Printer Manufactures Web site and search for the latest updates to your printer and the Operating System you are using.
    These will more often than not download to your desktop.
    You must drag these to the setup folder and or the utilities folder and then double click them to launch them. after you have completed this your printer should work.
    One other thing, If you have Classic and or OS9 on your machine you might have to do the same for OS9 Applications , and Utilities for it to print in Classic. Don

  • PSE Backup wouldn't work: "CD device driver not installed; install PSE" didn't fix problem; Win7

    I'm trying to backup by photos for the first time! in Photoshop 5.0 on a Windows 7 system. I get to "Full Backup" option, and get a pop-up that says "CD device driver not installed; reinstall PSE". I put my PSE disk into my computer, select "Repair... installs... missing files"; PSE re-installs, but I get the same message again when I try to backup. How do I find a CD device driver? (My DVD is formatted, but PSE can't find it.)

    I just found a photoshop elements 5.0.2 update "patcher" and installed it. The install was successful but I still got the same message saying "CD device driver not installed". Might there be a problem since I'm now on Windows 7 and no longer on XP? I have no need to buy a newer version since Elements 5.0 does everything I need to do. Any other suggestions?

  • Bluetooth driver not working on Windows 10

    Hello everyone, I upgraded my PC from Windows 8.1 to Windows 10 today. Everything else is working fine but the bluetooth driver seems to be incompatible. I had the 'Mediatek (Ralink) bluetooth software driver for Windows 8.1' installed earlier, which doesn't work with Windows 10. I checked with the Ralink website and the HP driver support but didn't find anything as yet.  My question is, will the driver for Windows 10 be made available soon?thanks

    Hi  ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion 15-n010tx Notebook and issue with drivers for Bluetooth and Windows 10. Here is troubleshooting when drivers are not available yet. Have you tried in the Device Manager to update the driver that is currently installed? In the device manager try selecting find new hardware.
    Here is a link to the HP Support Assistant if you need it. It has a Wireless support assistant inside it that might help you. The updated drivers will be posted as available. We are seeing them update regularly. I would check back to your drivers page. I hope this helps. Thanks.  

  • Satellite L750: WLan LED is OFF / Bluetooth driver not installable

    Hi, can anyone tell if this is known issue or not.
    This is "Out-of-the-box" condition.
    1) the rightmost wireless communication indicator lamp is always off regardless the status of internet connection. Typically, wireless internet connection is not detected upon boot-up, therefore FN+F8 and "All-on" step is required till I get internet connection be established.
    2) In this situation, if I try to switch on Bluetooth (for me to be able to use Bluetooth mouse), it starts installing Bluetooth driver but is terminated in the half way saying that "Bluetooth can not be powered on, turn on button on the side of the unit"- obviously there is no physical button or switch on my laptop corresponding to this statement.
    To make matters worse, if I try to update BIOS to the latest version, the file contains trojan horse virus (as of 3 Dec 2012, 10pm, New Zealand time) and I was unable to update.
    I updated the third party wireless lan driver (64 bit) but it doesn't seem to fix the problems.
    Thank you
    Please can anyone help me?
    L750
    Model: PSK2YA-0T102S
    Message was edited by: tshskzk

    Hi
    What system are you using? Win 7 or Win 8?
    Using Fn + F8 switches the Wlan and BT on and off.
    Using Win 7 you can enable and disable WLan or BT but using Win 8 the FN + F8 would disable Wlan and BT at the one and the same time.
    I have no idea what WLan card you have but I think that one module contains WLan and BT functionality. So if you want to install BT stack you have to install firstly the Bluetooth filter (i.e if you have Atheros Wlan card you have to install Atheros BT filter BEFORE BT stack).
    It looks like the unit is from Australian so I recommend checking the Toshiba AU driver page to get all the drivers

  • Hp recovery manager pavilion dv7 windows 7 64bit not installed correctly

    I'm trying to reinstall Recovery Manager after a hard disk replacement. I have a HP Pavilion dv7 4060si running Windows 7 Home Premium 64 bit. I've downloaded sp45602 and installed it. It did not install properly. When I went to the SwSetup/sp45602 folder and clicked RecoveryMgr.exe I got a message that a DZIP32.dll file was missing. I downloaded it and dragged it into the SwSetup/sp45602 folder. Then I got a message that HardDisk.dll was missing. I downloaded it and dragged it into the SwSetup/sp45602 folder. Then I got a message that PRRC.dll was missing. I downloaded it and dragged it into the SwSetup/sp45602 folder. Now I get a message in Turkish that translated by Google reads: Recovery Manager driver failed to start. To apply you will need to reinstall.
    I've deleted the SwSetup/sp45602 folder, downloaded the sp45602.exe again and gone through the same process to get the same result. What is missing from my software?

    Did you resolve this?
    I'm getting the same issues!

  • Ipod 5th Generation 80 GB / Device Manager / Driver not Installed / Code 28

    Well, where do I begin! Got my 1st Ipod 2 days ago & still unable to use it! I have installed & uninstalled the itunes 7 software numerous times. On phone w/ Apple for 1 hour...followed by online chat help w/ Dell.
    I've tryed 4 different USB ports on my computer. The device Manager shows the Ipod w/ a ? and a ! in yellow. The add new hardware tells me, "Drivers for this device are not installed. Code 28." My computer reconizes that the ipod is plugged in, but will not do anything. There is no communication between the 2. Keeps telling me to insert cd for software for ipod.
    Help! Does seem that other people are having similar issues. I think a software cd should of been provided w/ the ipod....not sure if that would of corrected my problem.

    Hi,
    Click Start > All Programs > Accessories > Run. the Run dialog appears,
    Type %temp%, then click OK.
    locate and enter into the HP Installation temporary folder, start with the 7Z characters.
    If you can see several folders starting with 7Z, locate the latest one.
    Click the Address bar area, then the full address path will appear,
    Copy the full path location by clicking CTRL + P while the path is selected.
    Enter the Device Manager.
    Right click the printer name with the error mark, then click Update Driver.
    Select the second option to manually locate the driver.
    Paste the temporary folder path and click Next (Keep Include Sub Fulders marked), the driver should be updated.
    Please let me know of any change,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Ethernet Controller - Driver not installed - Compaq Presario

    Hello, I am new here so be gentle
    I have just bought second hand a Compaq Presario 6240EA, motherboard is a Compaq 07D0h.
    In the hardware - device manager, it shows 'Other devices' - Ethernet Controller, with a large yellow question mark and exclamation mark.
    Details in properties show the following: drivers for this device are not installed (Code 28)
    PCI\VEN_10DE&DEV_01C3&SUBSYS_00A80E11&REV_C2\3&13C0B0C5&0&20
    I have search the HP and Compaq websites for driver downloads and have downloaded all the nVidia drivers available on the Compaq site, none of which improve the situation.
    Would there be somewhere else to look, I am at my wits end with this, any help would be much appreciated.
    Thank you in anticipation.
    This question was solved.
    View Solution.

    Please start your own thread rather than opening old ones back up. Also provide your full model number particularly when asking about hardware function which may involve drivers. We have to know precisely what hardware we are dealing with. Like the posts above, you may want to include the hardware id of the affected device.

  • Wifi driver not installing for windows7 64 Bit edition

    HI
    i had replaced my operating system to windows ultimate Bit.
    My laptop model no: G580 (20157)
    after replacing my operating system all the drivers are installed successfully except network controller & USB 3.0 host controller.
    then after i tried to reinstall my driver and installed my driver.but wifi is not working
    please help me my wifi driver is installed but not working.i had installed energy management then from shortcut i turn on my wifi but it is not turningon.
    and when i searched from CMD promt(c:\netsh wlan show drivers),it gives there is no wifi driver found.
    please anyone suggest me wether there is any  other driver for this problem....

    Hi Slape84,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that the Wireless driver is not getting installed in your G580 laptop after re-installing OS (Operating System), I suggest you to check if the Wireless is enabled in BIOS first then try to install the drivers. Below is the steps to access BIOS and check if the Wireless is enabled or not:
    To enter BIOS setup utility, press F2 when the Lenovo logo appears on the screen while the computer is starting up.
    NOTE: To check how the BIOS menu looks and to explore its options click here.
    Now select “Configuration” Tab and enable the “Wireless LAN Support” by clicking on Enter Key when you are on the option.
    Then Click on “F10” Key and then YES to save the changes that are done in BIOS, the computer will automatically restart.
    Now check installing the Wireless driver in the computer, but and while installing while installing the driver right click on the downloaded file and select “Run as administrator” option to get it installed without any error.
    NOTE: Please click on "Select Product" then in "QUICK PATH" enter the model no. as G580 select the exact model.
    Support Drivers & Software downloads
    Do post us back if the issue still persists.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • W540 FaceTime HD Camera (Display) Driver Not Installed

    My new W540 (11/10/2014) Lenovo Solution Center under the Check-up tab alerts me that the FaceTime HD Camera (Display) Driver is Not Installed.  Such as it is, the camera, a 720P HD, works just fine.  A search of resources does not uncover any comment or Driver on this issue.  So, since there is no problem as near as I can determine, should I just ignore the lack of Driver issue, and if so, what is the procedure to stop the Solution Center from alerting me to this error?  But if on the other hand I should install the Driver, where is that to be found?
    MTM 20BG-CTOWW
    Other comments not related to the Subject:
    I'm using the W540 in the Ultra Dock with video on a second monitor, an Apple monitor, using a Thunderbolt cable.  There is no Thunderbolt port in the Dock, so I use the W540 port which surprised me that it works.
    FWIW, it is taking me a lot of time learning the location of programs and utilities having moved from my old W510 Win 7(64) setup to the W540 Win(64) 8.1 setup.
    W540 20GBCTO, Ultra Dock, W520, 4270CTO, W510, 4318CTO; (2)T500, 2081CTO; Y560, 064657U, Y530, 405166U; T61p, 6465CTO, A31p, and L2461x Multi-touch Monitor, Mini Dock Plus Series 3
    Solved!
    Go to Solution.

    It is not a problem with the ThinkPad's camera. It is the camera in the Apple monitor that you don't have drivers for.
    Being Apple, they might not even make driver for Windows.
    W540: i7-4700mq, K2100m, 8 GB DDR3L, 512 GB SSD
    T510: i7-620m, NVS 3100m, 8 GB DDR3, 512 GB SSD

  • Sound Blaster SE, driver not install

    Hi, I just went out and bought Sound Blaster SE and installed it on my computer. But, no sound... so I uninstalled it fully and came here and downloaded the newest driver, I installed it and still.. no sound. So I came here and followed all of the guides and STILL NO SOUND! So I went into DxDiag and checked DirectSound and this is what is shows:
    [img"]http://i7.photobucket.com/albums/y278/Jamlpr/DxDiag.png[/img]
    After running the test directsound button I get this:
    [img"]http://i7.photobucket.com/albums/y278/Jamlpr/DxDiag2.png[/img]
    Note the (No Driver).. odd seeing how it says 3 inches above this that I do infact have a driver installed..
    I have onboard sound disabled and I have pcspeaker disabled. I'm running Windows XP Professional. The "no WHQL" wasn't there when I installed the driver via CD, but I still had the same (No Driver) issue.. so I don't think it is that.
    If I can recieve ANY help, It will be much appreciated. I would just like to have working sound!

    Sorry to double post, but I have heard that reinstalling Xp Pro will fix this problem, but I do not have the CDs anymore.. and I can't shell out the money to buy it again (that's why I got SE, it's cheap). Is there any other fix?

  • HP Envy 14 1260se graphics driver not installing correctly

    Recently my computer crashed and I had to reformat my hard drive. I was able to install Windows 7 with the SP1 and I have most of the drivers installed from HPs website. However, I'm having trouble installing my gaphics card (ATI Mobility Radeon HD 5650). 
    I go to Device Manager and it marks an error for the "Standard VGA Graphics Adapter" the device status is "This device cannot start. (Code 10). I've downloaded the driver from HPs website and I can begin the installing process. However, halfway through I get a BlueScreen, LocaleID: 1033, BCCode: 116. 
    I've tried almost everything I can think of. I've uninstalled the driver and installed it again. I've downloaded the driver from AMDs website and tried installing it that way and all methods have failed. Always during the installation process I get the BlueScreen and must restore my computer to before I tried installing the driver. 
    I don't know if this would be the reason, but in my Device Manager and under Display adapters I have "Intel(R) HD Graphics" and the "Standard VGA Graphics Adapter" (which should be the Radeon 5650).  So maybe I can't install my Radeon driver because it conflicts with my Intel card. I really don't know. (Before the clean install, my computer could switch between the cards. I don't think I have that ability in my computer right now.)
    My computer is fully functional except that I can't use my graphics card. I appreaciate any help or advice out there.

    Hello @notarealninja,
    Welcome to the HP Forums, I hope you enjoy your experience! 
    I understand that your notebook computer is not able to install the graphics drivers correctly, and I would be happy to assist you in this matter!
    In order to further diagnose the error message displayed on your computer screen, I recommend following this document on Blue Screen BCCode 116. This should help install any necessary software to prevent the occurrence of another Blue Screen message.
    Additionally, if the drivers still do not install correctly, I also suggest installing the original software and hardware drivers that came with your computer. This can be done by following this document on Using Recovery Manager to Restore Software and Drivers (Windows 7). To update these drivers, please follow this document on Using HP Support Assistant (Windows 7).
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Maybe you are looking for